Application Number: 17/00266/FUL. Photo 1. Photo 2
|
|
- Abraham Watkins
- 5 years ago
- Views:
Transcription
1
2 Application Number: 17/00266/FL Photo 1 Photo 2
3 Photo 3 Photo 4
4 Disclaimer: Do not scale from this drawing All contractors must visit the site and be responsible for taking and checking dimensions. All construction information should be taken from figured dimensions only. Any discrepancies between drawings, specifications and site conditions must be brought to the attention of the supervising officer. This drawing is for planning purposes only. It is not intended to be used for construction purposes. Whilst all reasonable efforts are used to ensure drawings are accurate, Astle Planning and Design Ltd accept no responsibility or liability for any reliance placed on, or use made of, this plan by anyone for purposes other than those stated above. Key Development Boundary LOCATION PLAN 1 Scale: 1:1250 WIP A ISSED FOR PLANNING RH MP Rev. Date Description By Chd 1: m a r c h i t e c t u r e m a s t e r p l a n n i n g u r b a n d e s i g n Astle Planning & Design Limited The Steam Mill, Steam Mill Street, Chester, CH3 5AN info@astlepd.co.uk Client Project DKINFIELD PHE 2 HYDE Drawing Title Drawn by Status Job no. LOCATION PLAN RH Checked by MP Date PLANNING A3 1:1250 Dwg.no. Rev. BHM023 LP02 A This drawing is the copyright of Astle Planning & Design Limited and shall not be altered, copied, photographed or reproduced in any way without the written authority of Astle Planning & Design Limited.
5 PHE 2 ACCOMMODATION SCHEDLE - BHM Code Name Bed & Type Storey nit No's nit ft² ft² Total 4OA115 Oakwood 4 Bed Detached WE103 Weston 3 Bed Detached BE098 Bennett 3 Bed Detached Lambeth 3 Bed Det Lambeth 3 Bed Semi RO077 Rochester 3 Bed Semi Chatsworth 3 Bed Semi Chatsworth 3 Bed Mews Grand Total: 29 nits ft² Gross Site Area: 0.91 ha 2.25 ac 4OA115 4OA Site Statistics: SSR 0.04 ha 0.10 ac POS 0.13 ha 0.32 ac Extended Gardens 0.05 ha 0.12 ac Easement 0.02 ha 0.05 ac Nett Site Area: 0.67 ha 1.66 ac Gross Density: n/ha n/ac Nett Density: n/ha n/ac Gross Footage: m²/ha n/ac 4OA Nett Footage: m²/ha ft²/ac *Note - All Areas Approx. Abbreviations - ac = Acres ha = Hectares ft² = square Feet m² = square n = units Metres SSR = Single Sided Road POS = Public Open Space Det = Detached Apt = Apartment 3BE098 4OA OA115 MH7 4OA XX100 Key HouseType Code 2 - Bed Number XX - House Type Abbreviation Area sq ft Plot Handing Development Boundary m Mineshaft and standoff FPS Peak Forest Canal RO MH5 55 DKINFIELD ROAD m CONISTON AVENE Towing Path 3WE G LB TCB 94.8m 20 1 CNLIFFE STREET 15 4 Nursery 14 5 DKINFIELD ROAD THROSTLE BANK 3 STREET m MS 94.8m 99.7m SP 1: m E MINE SHAFTS SHOWN RH MP D AMENDED TO CLIENT COMMENTS RH MP C ROAD AMENDED TO HIGHWAYS COMMENTS RH MP B MINESHAFTS SHOWN RH MP A ISSED FOR PLANNING RH MP Rev. Date Amendment By Chd Project Subject Scale Drawing No. (a member of Bellway Plc Group of Companies) DKINFIELD ROAD HYDE PLANNING LAYOT PHE 2 Date (Manchester) Bellway Homes Ltd 304 Bridgewater Place, Birchwood Park Warrington, WA3 6XG Tel: Fax: Drawn Checked 1: MP MP BH/MAN/ENG/ Revision Note All specifications, materials and workmanship to be in accordance with current NHBC and Building Regulations. Main drainage to comply with Sewers for Adoption current edition. Highways to be in accordance with Local Authority specification. Do not scale from this drawing. All dimensions to be verified with the drawing office. Original Sheet Size A1 Do Not Scale From This Drawing E Y:\Bellway Homes\BELLWAY HOMES MANCHESTER - BHM\BHM023 - DNKINFIELD ROAD, HYDE\CRRENT DRAWINGS\DKINFIELD ROAD HYDE - PLANNING LAYOT PHE 2 REV E N2.dwg File Name :
6 Dukinfield Road Hyde Housetype Range Detailed Planning Application March 2017 All housetypes BHM023P2/HT
7 Dukinfield Road Hyde Housetypes Oakwood 1151 sq.ft March 2017 A3 1: m
8 Dukinfield Road Hyde Housetypes Weston 1025 sq.ft March 2017 A3 1: m
9 Dukinfield Road Hyde Housetypes Bennett 978 sq.ft March 2017 A3 1: m
10 Dukinfield Road Hyde Housetypes Lambeth 794 sq.ft March 2017 A3 1: m
11 Dukinfield Road Hyde Housetypes Rochester 775 sq.ft March 2017 A3 1: m
12 Dukinfield Road Hyde Housetypes Chatsworth 733 sq.ft March 2017 A3 1: m
1.1 Architectural Drawing No Title Rev
1.0 Drawings 1.1 Architectural Drawing No Title Rev BA2129 PL-001 Site Location Plan - BA2129 PL-002 Existing Site Plan - BA2129 PL-003 Proposed Site Plan - BA2129 PL-004 Proposed Unit Type A - BA2129
More informationResidential Plot Plans
Residential Plot Plans Planning & Development Services/Building Safety Division 1 Riverfront Plaza Ste. 110 Lawrence, KS 66044 (785)832-7700 Fax (785)832-3110 Email: buildinginspections@lawrenceks.org
More informationItem 2. September 28, 2017
September 28, 2017 Item 2 Applicant: Georgetown Development Location: 190 N 1100 W Prepared by: Sean Conroy, Community Development Director Public Hearing: No Zone: PRD-1 Attachments: 1. Findings. 2. Project
More informationClear Creek County Site Development
Clear Creek County Annex Community Development Clear Creek County Site Development The Clear Creek Board of County Commissioners has adopted design standards for the construction of driveways. These design
More informationBoarbank Lane, Allithwaite
Boarbank Lane, Allithwaite Design and Access Statement September 08 Contents Section : The Site Site Location 4 Existing Site Plan 5 Site Photographs 6 Section : Design Proposals Site Layout 8 Elevations
More informationRESIDENTIAL DEVELOPMENT 608 SPRINGBANK DRIVE 608 SPRINGBANK DRIVE LONDON, ON DESIGN BRIEF SPRINGBANK DRIVE WONDERLAND ROAD EAST ELEVATION NORTH ELEVATION WONDERLAND ROAD SPRINGBANK DRIVE SOUTH ELEVATION
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11699-1 Second edition 2008-09-15 Non-destructive testing Industrial radiographic film Part 1: Classification of film systems for industrial radiography Essais non destructifs
More informationISO 897 INTERNATIONAL STANDARD. Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side
INTERNATIONAL STANDARD ISO 897 Third edition 2000-10-15 Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side Photographie Films en bobines et films en formats 126,
More informationISO INTERNATIONAL STANDARD. Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions
INTERNATIONAL STANDARD ISO 15488 Second edition 2003-11-15 Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions Pinces de serrage avec angle de réglage de 8 pour queues d'outil
More informationCITY OF EL MIRAGE DEVELOPMENT APPLICATION PROCESS
DEVELOPMENT APPLICATION PROCESS Development Applications are reviewed by the El Mirage Technical Advisory Committee (TAC) to ensure Building, Engineering and Zoning compliance before scheduling public
More informationCITY OF EL MIRAGE DEVELOPMENT APPLICATION PROCESS
DEVELOPMENT APPLICATION PROCESS I. Technical Advisory Committee (TAC) 1. Submit TAC Review Application (See Page 3 for TAC Review Application Requirements) 2. Review of TAC Review Application by Technical
More informationSection E NSPS MODEL STANDARDS FOR TOPOGRAPHIC SURVEYS Approved 3/12/02
Section E NSPS MODEL STANDARDS FOR TOPOGRAPHIC SURVEYS Approved 3/12/02 1. INTRODUCTION This standard is written to provide the professional surveyor (Surveyor) and the client with a guideline for producing
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 6: Cyrillic alphabet
INTERNATIONAL STANDARD ISO 3098-6 First edition 2000-05-01 Technical product documentation Lettering Part 6: Cyrillic alphabet Documentation technique de produits Écriture Partie 6: Alphabet cyrillique
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 3: Greek alphabet
INTERNATIONAL STANDARD ISO 3098-3 Second edition 2000-05-01 Technical product documentation Lettering Part 3: Greek alphabet Documentation technique de produits Écriture Partie 3: Alphabet grec Reference
More informationArea Referencing Report in accordance with the RICS Code of Measuring Practice Culverdon, Pyrcroft Road, Chertsey KT16 9LE
Area Referencing Report in accordance with the RICS Code of Measuring Practice Culverdon, Pyrcroft Road, Chertsey KT16 9LE Prepared for Prepared by Berwick Hill Properties Tom Pugh BSc (Hons) MRICS Alistair
More informationISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances
INTERNATIONAL STANDARD ISO 10285 Second edition 2007-11-01 Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Roulements Roulements linéaires à recirculation de billes,
More informationISO 9875 INTERNATIONAL STANDARD. Ships and marine technology Marine echo-sounding equipment
INTERNATIONAL STANDARD ISO 9875 Third edition 2000-11-01 Ships and marine technology Marine echo-sounding equipment Navires et technologie maritime Appareils de sondage par écho Reference number ISO 9875:2000(E)
More informationAkatherm PE drainage complies with EN1519 and has water mark certification for AS/NZS 4401 and AS/NZS A mm x 5m 3. A mm x 5m 3
AKATHERM HDPE DRAINAGE JULY 2016 PE DRAINAGE The Akatherm HDPE system has a full range which includes pipes, bends, junctions, reducers, traps and electrofusion couplers. Akatherm HDPE has high temperature
More informationDE BOERS DRIVE TORONTO
FOR LEASE 20 DE BOERS DRIVE TORONTO MIXED USE LEASING: OFFICE // RETAIL // MEDICAL Please visit our website at: www.domocentre.ca HIGHLIGHTS 3 storey high common atrium, green wall and cafe Office configurations
More informationISO INTERNATIONAL STANDARD. Ships and marine technology Propulsion plants for ships Part 1: Vocabulary for geometry of propellers
INTERNATIONAL STANDARD ISO 3715-1 First edition 2002-03-01 Ships and marine technology Propulsion plants for ships Part 1: Vocabulary for geometry of propellers Navires et technologie maritime Installations
More informationACSA PLAN REVIEW CHECKLIST (Guideline Only) (4) Standard water and sewer general plan notes (attached).
ACSA PLAN REVIEW CHECKLIST (Guideline Only) Revised: December 3, 2015 General (1) Proper Title (2) Vicinity map on first sheet. (3) Date and latest plan revision. (4) Standard water and sewer general plan
More informationISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances
INTERNATIONAL STANDARD ISO 10285 Second edition 2007-11-01 Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Roulements Roulements linéaires à recirculation de billes,
More informationTOWN OF FLEMING 2433 Dublin Road, Auburn, NY Phone (315) , Fax (315)
TOWN OF FLEMING 2433 Dublin Road, Auburn, NY 13021 Phone (315) 252-8988, Fax (315) 252-1492 APPLICATION FOR BUILDING PERMIT No work on the proposed project is to begin prior to issuance of a permit or
More informationCITY OF DES MOINES, IA PERMIT AND DEVELOPMENT CENTER 602 Robert D Ray Drive Des Moines, IA Phone:
CITY OF DES MOINES, IA PERMIT AND DEVELOPMENT CENTER 602 Robert D Ray Drive Des Moines, IA 50311 Phone: 515-283-4200 Minor Site Plan list This checklist should be used as a guide in the preparation of
More informationThe NEW Inner Harbor... Underway!!! Architects: QPK Design & Dalpos Architects Rendering: Spine 3D
The NEW Inner Harbor... Underway!!! Architects: QPK Design & Dalpos Architects Rendering: Spine 3D TRUE PROJECT KEY 1. MIXED-USE RETAIL / RESIDENTIAL 2. MIXED-USE RETAIL / RESIDENTIAL 3. LUXURY APARTMENTS
More informationThe Bonded Warehouse ManChesTer s InnoVaTIon district
The Bonded Warehouse MANCHESTER S INNOVATION DISTRICT WORK @ OLD GRANADA STUDIOS Granada, a true icon that has dominated the skyline of Manchester for over 50 years. A landmark that was the first significant
More informationConcept Plan. Application Upload Checklist & Submission Requirements
MONTGOMERY COUNTY PLANNING DEPARTMENT THE MARYLAND-NATIONAL CAPITAL PARK AND PLANNING COMMISSION Concept Plan Application Upload Checklist & Submission Requirements Rev. 2017-09-01 Application Upload Checklist
More informationWindmill Village Homeowners Association
Windmill Village Homeowners Association Rules & Design Guidelines Windmill Village Homeowners Association P.O. Box 5720 Mesa, AZ 85211 APPLICATION PROCEDURE Submittal Application and plans (which will
More informationPlanning and Zoning Application & Checklist
City of Driggs, Idaho Planning & Zoning 60 S. Main Street PO Box 48 Driggs, ID 83422 Ph: (208) 354-2362 Fax: (208) 354-8522 www.driggs.govoffice.com Planning and Zoning Application & Checklist DESIGN REVIEW
More informationCONSTRUCTION PLAN APPLICATION SUBMITTAL PACKAGE REQUIREMENTS
Development Services Department, 3363 West Park Place, Pensacola, Fl 32505 (850) 595-3475 CONSTRUCTION PLAN APPLICATION SUBMITTAL PACKAGE REQUIREMENTS All Construction Plan Submittal Packages shall contain
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings
INTERNATIONAL STANDARD ISO 128-44 First edition 2001-04-15 Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings Dessins techniques Principes généraux
More informationISO INTERNATIONAL STANDARD. Ergonomic design for the safety of machinery Part 3: Anthropometric data
INTERNATIONAL STANDARD ISO 15534-3 First edition 2000-02-15 Ergonomic design for the safety of machinery Part 3: Anthropometric data Conception ergonomique pour la sécurité des machines Partie 3: Données
More informationElmara Pett Level Road, Pett Level, Hastings, East Sussex, TN35 4EH
Elmara Pett Level Road, Pett Level, Hastings, East Sussex, TN35 4EH ELMARA In an enviable seafront location overlooking Rye Bay in the delightful coastal village of Pett Level. This detached bungalow (1931)
More informationISO INTERNATIONAL STANDARD. Paints and varnishes Drying tests Part 1: Determination of through-dry state and through-dry time
INTERNATIONAL STANDARD ISO 9117-1 First edition 2009-05-15 Paints and varnishes Drying tests Part 1: Determination of through-dry state and through-dry time Peintures et vernis Essais de séchage Partie
More informationRO SIX MILE COULEE 48TH AVENUE PLAN 961 0600 ENVIRONMENTAL RESERVE EASEMENT N.W. 1/4 SEC. 15-8 - 21-4 ARBOUR R I DG E GR E E N ARBOUR R I DGE GREEN ARBOUR WAY ARBOUR LANE ARBOUR RIDGE DRIVE ARBOUR BLVD.
More informationIR UK Interface Requirement 2096
IR 2096 - UK Interface Requirement 2096 Licence exempt White Space Devices operating in 470 MHz to 790 MHz band Publication date: January 2016 Date amended: January 2018 2015/1535/EU Notification number:
More informationISO INTERNATIONAL STANDARD. Textile machinery Weaving machine temples Part 2: Full-width temples
INTERNATIONAL STANDARD ISO 8118-2 First edition 2006-01-15 Textile machinery Weaving machine temples Part 2: Full-width temples Machines à tisser Templets pour métiers et machines à tisser Partie 2: Templets
More informationREQUIRED MATERIALS FOR RESIDENTIAL ACCESSORY STRUCTURE PERMITS (Garages, Sheds, and other structures over 200 sq ft or on a permanent foundation)
REQUIRED MATERIALS FOR RESIDENTIAL ACCESSORY STRUCTURE PERMITS (Garages, Sheds, and other structures over 200 sq ft or on a permanent foundation) The following materals shall be submitted and reviewed
More informationSUBMITTAL REQUIREMENTS FOR USE PROCESS III OR PROCESS IV
COMMUNITY DEVELOPMENT DEPARTMENT 33325 8 th Avenue South Federal Way WA 98003 253-835-2607; Fax 253-835-2609 www.cityoffederalway.com SUBMITTAL REQUIREMENTS FOR USE PROCESS III OR PROCESS IV USE PROCESS
More informationRESIDENTIAL DEMOLITION PERMIT APPLICANT CHECKLIST
RESIDENTIAL DEMOLITION PERMIT APPLICANT CHECKLIST The purpose of this form is to inform applicants of: 1) the requirements for building permits and stormwater permits for residential demolition projects;
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS IMD Manager IMD 100 DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: 9614 9615 Info@deif.com www.deifwindpower.com 4189360018 Rev.: A Date: 2016-12-22 Language:
More informationISO INTERNATIONAL STANDARD. Optics and photonics Minimum requirements for stereomicroscopes Part 2: High performance microscopes
INTERNATIONAL STANDARD ISO 11884-2 Second edition 2007-02-01 Optics and photonics Minimum requirements for stereomicroscopes Part 2: High performance microscopes Optique et photonique Exigences minimales
More informationISO 216 INTERNATIONAL STANDARD. Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction
INTERNATIONAL STANDARD ISO 216 Second edition 2007-09-15 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction Papiers à écrire et certaines
More informationYavapai County Development Services
Yavapai County Development Services Prescott Office 1120 Commerce Dr., Prescott, AZ 86305 (928) 771-3214 Fax: (928) 771-3432 Cottonwood Office 10 S. 6 th Street, Cottonwood, AZ 86326 (928) 639-8151 Fax:
More informationIR UK Interface Requirement 2095 High Duty Cycle Network Relay Points (NRPs)
IR 2095 - UK Interface Requirement 2095 High Duty Cycle Network Relay Points (NRPs) Publication date: January 2015 Date amended: January 2018 2015/1535/EU Notification number: 2014/0480/UK Contents Section
More informationPARKING IMPROVEMENT AIRPORT CAMPUS AMENDED SITE PLAN APPROVAL DRAWINGS 113 KING STREET TOWN OF NORTH CASTLE, NEW YORK AIRPORT CAMPUS I-V LLC
AMENDED SITE PLAN APPROVAL DRAWINGS PARKING IMPROVEMENT AIRPORT CAMPUS CLIENT: AIRPORT CAMPUS I-V LLC 113 KING STREET TOWN OF NORTH CASTLE, NEW YORK JMC DRAWINGS SITE PLANNER, CIVIL ENGINEER, SURVEYOR
More informationMinor Site Plan Review Process
Minor Site Plan Review Process Pre-Application Conference Community Meeting (optional) Submit Application Determination of Completeness Staff Report (optional) Technical Review Committee Decision Notice
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3070-3 Third edition 2007-12-15 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 3: Machines with movable column
More informationISO INTERNATIONAL STANDARD. Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours
INTERNATIONAL STANDARD ISO 5751-3 Sixth edition 2010-11-15 Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours Pneumatiques et jantes pour motocycles (séries millimétriques)
More informationISO INTERNATIONAL STANDARD. Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method
INTERNATIONAL STANDARD ISO 11890-1 Second edition 2007-07-01 Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method Peintures et vernis Détermination de
More informationISO INTERNATIONAL STANDARD. Ophthalmic instruments Fundus cameras. Instruments ophtalmiques Appareils photographiques du fond de l'œil
INTERNATIONAL STANDARD ISO 10940 Second edition 2009-08-01 Ophthalmic instruments Fundus cameras Instruments ophtalmiques Appareils photographiques du fond de l'œil Reference number ISO 10940:2009(E) ISO
More informationMINIMUM DRAWING REQUIREMENTS FOR WATER AND SEWER LINE PROJECTS
Public Works Department Water & Wastewater Services WATER & WASTEWATER ENGINEERING DIVISION 2555 West Copans Road Pompano Beach, Florida 33369 954-831-0745 FAX 954-831-0798/0925 MINIMUM DRAWING REQUIREMENTS
More informationOperating Standards Attachment to Development Application
Planning & Development Services 2255 W Berry Ave. Littleton, CO 80120 Phone: 303-795-3748 Mon-Fri: 8am-5pm www.littletongov.org Operating Standards Attachment to Development Application 1 SKETCH PLANS
More informationImages may depict upgrade items and items not supplied in the Tempo by Mojo range.
Images may depict upgrade items and items not supplied in the Tempo by Mojo range. Can Can B C A D LOUNGE 3. x. OUTDOOR LIVING 3. x 3.1 DINING.3 x. P STORE KITCHEN REF BATH LDRY LINEN BED 3.7 x.8 BED.7
More informationDesign guide to separating distances during construction
Design guide to separating distances during construction For timber frame buildings and projects above 600m 2 total floor area Part 2 - Standard timber frame and construction process mitigation methods
More informationISO 2490 INTERNATIONAL STANDARD. Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module Nominal dimensions
INTERNATIONAL STANDARD ISO 2490 Third edition 2007-10-01 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module Nominal dimensions Fraises-mères monoblocs à entraînement par tenon
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15407-2 First edition 2003-04-15 Pneumatic fluid power Five-port directional control valves, sizes 18 mm and 26 mm Part 2: Mounting interface surfaces with optional electrical
More informationISO INTERNATIONAL STANDARD. Photography Electronic scanners for photographic images Dynamic range measurements
INTERNATIONAL STANDARD ISO 21550 First edition 2004-10-01 Photography Electronic scanners for photographic images Dynamic range measurements Photographie Scanners électroniques pour images photographiques
More informationTown of Apex, North Carolina
POND DRAINAGE PLAN APPLICATION Town of Apex, North Carolina POND DRAINAGE PLAN APPLICATION: Applications are due by 12:00 pm on the first business day of each month. Please see the Minor Site Plan Schedule
More informationISO INTERNATIONAL STANDARD. Photography Electronic scanners for photographic images Dynamic range measurements
INTERNATIONAL STANDARD ISO 21550 First edition 2004-10-01 Photography Electronic scanners for photographic images Dynamic range measurements Photographie Scanners électroniques pour images photographiques
More informationREGULATIONS AND APPLICATION. For The Interment of Cremains In SAINT PETER BY-THE-LAKE MEMORIAL GARDEN
the episcopal church of st. peter by-the-lake REGULATIONS AND APPLICATION For The Interment of Cremains In SAINT PETER BY-THE-LAKE MEMORIAL GARDEN 8433 Fairfield Forest Rd. Denver, N.C. 28037 704-483-3460
More informationISO 105-F04 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric
INTERNATIONAL STANDARD ISO 105-F04 First edition 2001-02-15 Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric Textiles Essais de solidité des teintures Partie F04:
More informationPlanning Permit Application LAND USE PRELIMINARY APPLICATION (LUP)
Planning Permit Application LAND USE PRELIMINARY APPLICATION (LUP) 415 W 6 th ST ~ Vancouver, WA 98660 PO Box 1995 ~ Vancouver, WA 98668 Phone (360) 487-7800 www.cityofvancouver.us Type Of Work Type I
More informationISO INTERNATIONAL STANDARD. Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron
INTERNATIONAL STANDARD ISO 6622-1 Second edition 2003-12-01 Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron Moteurs à combustion interne Segments de piston Partie 1:
More informationISO INTERNATIONAL STANDARD. Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C
INTERNATIONAL STANDARD ISO 4759-1 Second edition 2000-11-15 Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C Tolérances des éléments de fixation Partie 1: Vis, goujons
More informationSITE STATISTICS SQ.FT [ SQ.M.]
SITE PLAN :00 No. 66 ADJACENT STOREY DWELLING LOT AREA GFA SITE STATISTICS 870.77 SQ.FT [777.67 SQ.M.] N 8 00'" E OVERHEAD WIRE '-7 " [760] EXISTING PRIVATE TREE TO BE REMOVED '-" [680] 9'-7" [90] 9'-7
More informationISO INTERNATIONAL STANDARD. Horology Water-resistant watches. Horlogerie Montres étanches. First edition
INTERNATIONAL STANDARD ISO 22810 First edition 2010-08-01 Horology Water-resistant watches Horlogerie Montres étanches Reference number ISO 2010 PDF disclaimer This PDF file may contain embedded typefaces.
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Offshore production installations Basic surface process safety systems
INTERNATIONAL STANDARD ISO 10418 Second edition 2003-10-01 Petroleum and natural gas industries Offshore production installations Basic surface process safety systems Industries du pétrole et du gaz naturel
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Automatic identification and data capture techniques Bar code master test specifications
INTERNATIONAL STANDARD ISO/IEC 15421 Second edition 2010-06-01 Information technology Automatic identification and data capture techniques Bar code master test specifications Technologies de l'information
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10322-1 Third edition 2006-02-01 Ophthalmic optics Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal lens blanks Optique ophtalmique
More informationISO INTERNATIONAL STANDARD. Ceramic tiles Part 16: Determination of small colour differences
INTERNATIONAL STANDARD ISO 10545-16 Second edition 2010-03-15 Ceramic tiles Part 16: Determination of small colour differences Carreaux et dalles céramiques Partie 16: Détermination de faibles différences
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 4: Diacritical and particular marks for the Latin alphabet
INTERNATIONAL STANDARD ISO 3098-4 Second edition 2000-05-01 Technical product documentation Lettering Part 4: Diacritical and particular marks for the Latin alphabet Documentation technique de produits
More informationTOWN OF AMHERST PLANNING DEPARTMENT MINOR SITE PLAN AND MINOR ADJUSTMENT REVIEW AND APPROVAL PROCEDURE
TOWN OF AMHERST PLANNING DEPARTMENT MINOR SITE PLAN AND MINOR ADJUSTMENT REVIEW AND APPROVAL PROCEDURE This application package includes the following: Application Procedures Application Form & Checklist
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12004-1 First edition 2008-10-15 Metallic materials Sheet and strip Determination of forming-limit curves Part 1: Measurement and application of forminglimit diagrams in the
More informationMill Lane, Cookham, Maidenhead, Berkshire
Water Music Sol Mill stands in a delightful setting, only minutes from excellent communications to Central LondonSol Mill is an interesting period property now in need of some refurbishment, in a wonderful
More informationISO 1519 INTERNATIONAL STANDARD. Paints and varnishes Bend test (cylindrical mandrel) Peintures et vernis Essai de pliage sur mandrin cylindrique
INTERNATIONAL STANDARD ISO 1519 Third edition 2011-01-15 Paints and varnishes Bend test (cylindrical mandrel) Peintures et vernis Essai de pliage sur mandrin cylindrique Reference number ISO 1519:2011(E)
More informationLegal Description & Site Plan Requirements and Layouts
Legal Description & Site Plan Requirements and Layouts Plot Plan * A plot plan shows the location of a house from an aerial view. * The site plan, also known as a plot or lot plan includes: 1. Site plan
More informationConceptual, Preliminary and Final Site Plan Review in Holladay City
Conceptual, Preliminary and Final Site Plan Review in Holladay City The City of Holladay incorporated in December, 1999 and adopted its own zoning ordinance in May, 2000. All land use decisions are made
More informationPROPOSED NEW ERECTION OF A COVERED LNIKWAY AND ADDITION & ALERATION TO 2 EXISTING BUS SHELTERS AT COLEMAN STREET AND NORTH BRIDGE ROAD
Page 3 Our Ref : FG5131622/Corr1 Date : 09 March 2015 Tender Ref No: TG/ITT/2014/0023 PROPOSED NEW ERECTION OF A COVERED LNIKWAY AND ADDITION & ALERATION TO 2 EXISTING BUS SHELTERS AT COLEMAN STREET AND
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1520 Third edition 2006-11-15 Paints and varnishes Cupping test Peintures et vernis Essai d'emboutissage Reference number ISO 1520:2006(E) ISO 2006 PDF disclaimer This PDF file
More informationLARAMIE COUNTY PLANNING & DEVELOPMENT OFFICE 3966 Archer Pkwy Cheyenne, WY Phone (307) Fax (307)
3966 Archer Pkwy Cheyenne, WY 82009 planning@laramiecounty.com Phone (307) 633-4303 Fax (307) 633-4616 SITE PLAN REVIEW PROCESS 1. Pre-Application Meeting: The applicant shall meet with a Laramie County
More informationISO INTERNATIONAL STANDARD. Rolling bearings Accessories Part 2: Locknuts and locking devices Dimensions
INTERNATIONAL STANDARD ISO 2982-2 Second edition 2001-04-15 Rolling bearings Accessories Part 2: Locknuts and locking devices Dimensions Roulements Accessoires Partie 2: Écrous à encoches et dispositifs
More informationLast Name: First Name: M.I:
ARCHITECTURE DESIGN REVIEW BOARD APPLICATION OFFICE USE ONLY APPLICATION # Permit # Fee Collected $ 1. Filing Status Initial Submission Amendment Withdrawal 2. Cost of Construction (Industry Standards)
More informationThe EDR Aerial Photo Decade Package
Wickenburg/Forepaugh W. US Highway 60/N. 436th Ave Wickenburg, AZ 85390 Inquiry Number: April 22, 2011 The Aerial Photo Decade Package Aerial Photo Decade Package Environmental Data Resources, Inc. ()
More informationISO INTERNATIONAL STANDARD. Textile machinery and accessories Beams for winding Part 5: Sectional beams for warp knitting machines
INTERNATIONAL STANDARD ISO 8116-5 Third edition 2008-12-15 Textile machinery and accessories Beams for winding Part 5: Sectional beams for warp knitting machines Matériel pour l'industrie textile Ensouples
More informationISO 3213 INTERNATIONAL STANDARD. Polypropylene (PP) pipes Effect of time and temperature on the expected strength
INTERNATIONAL STANDARD ISO 3213 Third edition 2009-09-15 Polypropylene (PP) pipes Effect of time and temperature on the expected strength Tubes en polypropylène (PP) Influence du temps et de la température
More informationISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances
INTERNATIONAL STANDARD ISO 3302-2 Second edition 2008-10-01 Rubber Tolerances for products Part 2: Geometrical tolerances Caoutchouc Tolérances pour produits Partie 2: Tolérances géométriques Reference
More informationFUTURE PARKING (5) LEGEND PROPERTY LIMIT CURB & GUTTER EASEMENT BUILDING RETAINING WALL WETLAND LIMITS TREELINE SAWCUT LINE SIGN PIPE BOLLARD NUMBER O
FUTURE PARKING (5) LEGEND PROPERTY LIMIT CURB & GUTTER EASEMENT BUILDING RETAINING WALL WETLAND LIMITS TREELINE SAWCUT LINE SIGN PIPE BOLLARD NUMBER OF PARKING STALLS PER ROW PROPOSED EXISTING STANDARD
More informationISO 534 INTERNATIONAL STANDARD. Paper and board Determination of thickness, density and specific volume
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 534 Third edition 2005-02-01 Paper and board Determination of thickness, density and specific volume Papier et carton Détermination de l'épaisseur,
More informationISO INTERNATIONAL STANDARD. Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions
INTERNATIONAL STANDARD ISO 10889-1 Second edition 2004-11-15 Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions Porte-outil à queue cylindrique Partie
More informationDEVELOPMENT REVIEW COMMENTS LAND DISTURBANCE PERMIT (LDP) CLEARING CLEARING & GRUBBING GRADING. Date Reviewed by. Project Name
GWINNETT COUNTY Department of Planning and Development One Justice Square 446 West Crogan Street Suite 150 1 st Floor Lawrenceville, GA 30046 Phone: 678.518.6000 Fax: 678.518.6240 www.gwinnettcounty.com
More informationISO 3334 INTERNATIONAL STANDARD. Micrographics ISO resolution test chart No. 2 Description and use
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3334 Third edition 2006-01-01 Micrographics ISO resolution test chart No. 2 Description and use Micrographie Mire de résolution ISO no. 2 Description
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20860-1 First edition 2008-10-15 Road vehicles 50 Ω impedance radio frequency connection system interface Part 1: Dimensions and electrical requirements Véhicules routiers Interface
More informationISO/TR TECHNICAL REPORT
TECHNICAL REPORT ISO/TR 13624-2 First edition 2009-12-01 Petroleum and natural gas industries Drilling and production equipment Part 2: Deepwater drilling riser methodologies, operations, and integrity
More informationRenewable Water Resources Greenville, South Carolina. CONTRACT DOCUMENTS Reedy River Basin Sewer Tunnel ADDENDUM IV - CONTRACT REVISIONS.
Renewable Water Resources Greenville, South Carolina CONTRACT DOCUMENTS ADDENDUM IV - CONTRACT REVISIONS Prepared by Black & Veatch Corporation Greenville, South Carolina B&V Project No. 192263 October
More informationISO 5-2 INTERNATIONAL STANDARD. Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
INTERNATIONAL STANDARD ISO 5-2 Fifth edition 2009-12-01 Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density Photographie et technologie graphique
More informationISO INTERNATIONAL STANDARD. Photography Root mean square granularity of photographic films Method of measurement
INTERNATIONAL STANDARD ISO 10505 First edition 2009-05-15 Photography Root mean square granularity of photographic films Method of measurement Photographie Moyenne quadratique granulaire de films photographiques
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14703 Second edition 2008-04-15 Fine ceramics (advanced ceramics, advanced technical ceramics) Sample preparation for the determination of particle size distribution of ceramic
More informationISO INTERNATIONAL STANDARD. Ships and marine technology Marine magnetic compasses, binnacles and azimuth reading devices
INTERNATIONAL STANDARD ISO 25862 First edition 2009-05-15 Ships and marine technology Marine magnetic compasses, binnacles and azimuth reading devices Navires et structures maritimes Compas magnétiques
More informationFIELD STRENGTH TEST REPORT. Report Number: M161126
Page 1 of 9 EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Vic 3042 Australia Ph: + 61 3 9365 1000 Fax: + 61 3 9331 7455 Email: sales@emctech.com.au FIELD STRENGTH TEST REPORT
More information