Nissan Dealership Graphics Program.

Size: px

Start display at page:

Download "Nissan Dealership Graphics Program."

Jeffry Phelps
5 years ago
Views:

2 GRAPHIC OVERVIEW Nissan Dealership Graphics Program. Ideal Image s Nissan Dealership Graphic Program offers dynamic photographic compositions of most Nissan models in three different sizes - applicable to every area of your facility. These impactful, stretched-fabric graphics are a compelling addition to your dealership. They are Nissan-approved and are an easy way to quickly and dramatically re-image your facility, extending the Nissan brand to all areas of your facility. Our stretched fabric graphics are more like artwork than traditional dealership graphics programs. The rich, deep tones and brilliant colors are achieved with a distinctive digital printing process utilizing water-based, solvent-free inks applied to 100% recycled substrate material to generate outstanding imagery. The finished products are not only visually stunning with rich color and warm contrast, but also fade resistant, non-reflective/non-glare, fire retardant and completely washable. They ship cost-effectively in tubes and are easily assembled. The graphics are interchangeable and can be updated with new inserts using the original frame. This is a cost effective solution to meeting your branding needs with unbeatable quality and durability. 2

3 N1 ALTIMA 3

4 N2 ALTIMA 4

5 N3 ALTIMA 5

6 N4 ALTIMA 6

7 N5 ALTIMA 7

8 N6 ARMADA 8

9 N7 CUBE 9

10 N8 CUBE 10

11 N9 FRONTIER 11

12 N10 FRONTIER 12

13 N11 FRONTIER 13

14 N12 GT-R 14

15 N13 GT-R 15

16 N14 GT-R 16

17 N15 GT-R 17

18 N16 GT-R 18

19 N17 GT-R 19

20 N18 GT-R 20

21 N19 GT-R 21

22 N20 GT-R 22

23 N21 GT-R 23

24 N22 GT-R 24

25 N23 JUKE 25

26 N24 JUKE 26

27 N25 MAXIMA 27

28 N26 MAXIMA 28

29 N27 MURANO 29

30 N28 PATHFINDER 30

31 N29 PATHFINDER 31

32 N30 PATHFINDER 32

33 N31 ROGUE 33

34 N32 ROGUE 34

35 N33 ROGUE 35

36 N34 ROGUE 36

37 N35 ROGUE 37

38 N36 SENTRA 38

39 N37 SENTRA 39

40 N38 TITAN 40

41 N39 TITAN 41

42 N40 Z-COUPE 42

43 N41 Z-COUPE 43

44 N42 Z-ROADSTER 44

45 N43 VERSA 45

46 N44 VERSA NOTE 46

47 N45 VERSA NOTE 47

48 N46 VERSA NOTE 48

GRAPHIC ASSEMBLY INSTRUCTIONS FRAME ASSEMBLY Start by connecting all corners of the frame.

Then tighten the lock with the allen wrench. Connect one corner at a time.

Loosen Losen this lock prior to Connect profiles together and Image above shows a a bad

connection. If the corners are not lined up properly it will cause problems.

Optimum viewing is 60 above finish floor to center of frame.

wall from top left corner to top right corner on underside of upper frame.

Locate two (of four) L Shaped mounting brackets and place on underside of line and inside 4

With top two brackets securely mounted, insert one set-screw into each bracket.

49 GRAPHIC ASSEMBLY INSTRUCTIONS FRAME ASSEMBLY Start by connecting all corners of the frame. Make certain the lock is loose and slide the two profiles together. Then tighten the lock with the allen wrench. Connect one corner at a time. See images below for further instructions. Loosen Losen this lock prior to Connect profiles together and Image above shows a a bad connecting the two profiles together. tighten lock. Image above shows a good connection. connection. If the corners are not lined up properly it will cause problems. FRAME INSTALLATION With frame assembled determine final placement of graphic on wall. Optimum viewing is 60 above finish floor to center of frame. Hold frame against wall in desired location, place level on top of frame, once level - mark wall from top left corner to top right corner on underside of upper frame. Remove frame and level. Measure in from both ends 4 and mark location for mounting brackets. Locate two (of four) L Shaped mounting brackets and place on underside of line and inside 4 mark. Screw 2 mounting brackets into wall using appropriate wall anchor system. With top two brackets securely mounted, insert one set-screw into each bracket. Place frame back onto brackets with set-screw fitting into frame groove. Check level. Adjust setscrew if necessary. Install bottom two L Shaped mounting brackets and adjust set-screws to secure frame. You are now ready to install the graphic insert. 4 L SHAPED MOUNTING BRACKETS 60 AFF LEVEL 4 49

GRAPHIC ASSEMBLY INSTRUCTIONS INSERT ASSEMBLY IMPORTANT!

of the fabric insert. Use of latex gloves is recommended.

Note: Inserts have a gasket sewn onto the back side edge as shown.

STEP 3 Repeat the process in the diagonally opposite corner.

STEP 5 Starting at the midpoint of each side of the frame, tuck in the

50 GRAPHIC ASSEMBLY INSTRUCTIONS INSERT ASSEMBLY IMPORTANT! BEFORE YOU START: Clean your hands thoroughly to prevent contamination of the fabric insert. Use of latex gloves is recommended. STEP 1 Working on a flat, clean surface unpack graphic insert and unfold. Note: Inserts have a gasket sewn onto the back side edge as shown. STEP 2 Install fabric front side in one corner as shown below. STEP 3 Repeat the process in the diagonally opposite corner. STEP 4 Finish installing the remaining corners as shown below. STEP 5 Starting at the midpoint of each side of the frame, tuck in the fabric going out to each corner to ensure a smooth finished look. Make sure entire gasket is completely inserted into the frame groove. 50

GRAPHIC QUOTATION REQUEST FORM HOW TO REQUEST A GRAPHICS QUOTATION: Print the quotation request form, complete the form, and return it to Ideal Image via fax or email for quotation.

51 GRAPHIC QUOTATION REQUEST FORM HOW TO REQUEST A GRAPHICS QUOTATION: Print the quotation request form, complete the form, and return it to Ideal Image via fax or for quotation. If you use , return it to customerservice@idealimageinc.com Ideal Image will prepare a quotation with delivery cost and applicable sales/use tax and return it to you. 8f1-0 NISSAN GRAPHICS QUOTATION REQUEST page 1 of 3 Date: Dealership Name Authorizing Individual (Please Print) Bill To Address Street Address (Location where these materials are to be shipped) City State Zip Code Address Phone Number Fax Number GRAPHICS FABRIC GRAPHICS: A high resolution, dye-sublimated fabric that offers a vibrant color-popping graphic, finished with a thin gasket strip on the edge. The strip is then inserted into a lightweight aluminum frame with a recessed groove. The fabric is taut when installed in the frame for a smooth, finished appearance. Location/ Media Image # Graphic Qty. Sales Price Total Price FRAMED GRAPHICS -- 24"W X 16"T $ $ "W X 20"T $ $ "W X 30"T $ $ - GRAPHICS ONLY -- 24"W X 16"T $ $ "W X 20"T $ $ "W X 30"T $ $ - N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 51

52 GRAPHIC QUOTATION REQUEST FORM Dealership Name NISSAN GRAPHICS QUOTATION REQUEST page 2 of 3 N11 N12 N13 N14 N15 N16 N17 N18 N19 N20 N21 N22 N23 N24 N25 N26 N27 N28 N29 N30 N31 N32 N33 N34 N35 N36 N37 N38 N39 N40 52

53 GRAPHIC QUOTATION REQUEST FORM Dealership Name NISSAN GRAPHICS QUOTATION REQUEST page 3 of 3 N41 N42 N43 N44 N45 N46 All images above can scale to all listed dimensions. Graphics Total $ - *Prices are subject to change without notice. Freight and Applicable Sales/Use Tax are not included. Exclusions: Permits Delivery/Set-Up Applicable Sales/Use Tax Lead Time: 6 to 8 weeks from receipt of payment Upon receipt of your faxed or ed order, Ideal Image will prepare a signed acceptance that includes your requested items along with freight and any applicable sales/use tax. To activate your order, please sign our proposal and return with payment. Payment Terms: Ideal Image requires full payment upon order placement. (The aforementioned 100% must be received prior to shipment ). Authorizing Individual (Please Sign): Date: Ordering Information: Fax this request form to: Or, this form to: customerservice@idealimageinc.com Or, call or Ext Or, mail this form to: Ideal Image, Inc., Attn: Nissan Graphics, 115 Haas Drive, Englewood, OH

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING Order #XXXXX - VK-2921 - General Layout Step 1 10 20 Plan View Page 1 of 6 Order #XXXXX - General Information Step 2 Using Your Setup Instructions The Visionary Designs Setup Instructions are created specifically