ASSEMBLY AND TEST INSTRUCTION
|
|
|
- Hortense Perry
- 5 years ago
- Views:
Transcription
1 SIZE(S): N/A EDP NO PAGE: 1 OF 8 REV. ALTERATIONS ALERT DATE BY ENG. Q/A 6 UPDATE WATTS LOGO TO WATTS WATER TECHNOLOGIES LOGO ON ATI, ADD WATER TECHNOLOGIES AFTER WATTS IN BODY OF ATI, UPDATE 4 TH LINE UNDER NOTES TO REMOVE REFER TO ATI AND ADD CONTACT 11W MJW JPJ MPS WATTS WATER TECHNOLOGIES MARKETING COMMUNICATIONS GROUP. NOTES: MASTER CARTON LOGO ARTWORK, OFF SHORE SUPPLIERS IMPORTANT: Do not recreate the Watts Water Technologies Logo. Contact Watts Water Technologies MARCOM Dept. for actual artwork files to be used. This artwork is to be used on all new and existing Watts Water Technologies master cartons. For domestic supplier master carton logo artwork refer to ATI M.75.A1 (EDP # ). For carton label creation information contact Watts Water Technologies Marketing Communications Group. The artwork on this ATI is for reference only and is not to be used as acceptance criteria for inspection. Dimensions shown in inches (millimeters shown in brackets [ ] ). This artwork will vary with each carton based on the cartons size and configuration. The following pages provide an outline for the creation of the artwork, however some items shown may need to be omitted or resized. Final artwork approval for all cartons is at the discretion of Watts Water Technologies Marketing Communications Group. For engineering reference only, ATI artwork saved as _ARTWORK in the ACTIVE ATI directory.
2 SIZE(S): N/A EDP NO PAGE: 2 OF 8 COLOR SPECIFICATIONS COLORS: ALL BLUE BARS AND W S TO BE PRINTED IN PROCESS BLUE INK WHEN PRINTING DIRECTLY ON BROWN CORRUGATED AS SHOWN ON THIS PAGE (PMS 300 BLUE INK MUST BE USED IF PRINTING ON A WHITE BACKGROUNG I.E.; WHITE CLAY COATED MATERIAL). ALL OTHER PRINTING (TEXT OR GRAPHIC) TO B PROCESS BLACK AS SHOWN ON THIS PAGE.
3 SIZE(S): N/A EDP NO PAGE: 3 OF 8 LAYOUT SPECIFICATIONS PLACE SHIPPING LABEL HERE PANEL #1 PANEL #2 PANEL #3 PANEL #4 Destination: Carton: of PO#: PLACE SHIPPING LABEL HERE Visit our Web
4 SIZE(S): N/A EDP NO PAGE: 4 OF 8 o LAYOUT SPECIFICATIONS CONTINUED, ARTWORK DIMENSIONS PANEL #1 & 2: AND 1/16 [1.59] THICK LINES TO BE PRINTED AS SHOWN ON PANEL #2. LOCATION TO BE USED FOR WATTS WATER TECHNOLOGIES MASTER CARTON LABEL ONLY PANEL #1 PANEL #2 Destination: Carton: of PO#: WATTS LOGO AND BLUE BAR TO BE PRINTED AS SHOWN. IMPORT INFORMATION LABEL WITH Destination: Carton: of, and PO#: TO BE PRINTED IN 1/16 [1.59] THICK BORDER AS SHOWN.
5 SIZE(S): N/A EDP NO PAGE: 5 OF 8 o LAYOUT SPECIFICATIONS CONTINUED, ARTWORK DIMENSIONS PANEL #3 & 4 PLACE SHIPPING LABEL HERE AND 1/16 [1.59] THICK LINES TO BE PRINTED AS SHOWN ON PANEL #3. LOCATION TO BE USED FOR WATTS WATER TECHNOLOGIES SHIPPING LABEL ONLY, NOT FOR SUPPLIER USE. PANEL #3 PANEL #4 PLACE SHIPPING LABEL HERE WATER TECHNOLOGIES WATER TECHNOLOGIES Visit our Web WATTS WATER TECHNOLOGIES LOGO AND BLUE BAR TO BE PRINTED AS SHOWN. Visit our Web TO BE PRINTED APPROXIMATELY 1/8 [3.2] BELOW WATTS WATER TECHNOLOGIES LOGO ON PANEL #4 AS SHOWN. SIZE PROPORTIONAL TO LOGO AS SHOWN.
6 SIZE(S): N/A EDP NO PAGE: 6 OF 8 OPTIONAL DATE CODE STAMPING FOR PRODUCT, PANEL #2 PANEL #1 PANEL #2 Destination: Carton: of PO#: SPECIFICATION FOR DATE CODING OF CARTON AFTER PRODUCT IS PACKAGED IN CARTON: STAMP DATE CODE ON CARTON DIRECTLY BELOW CARTON LABEL NOTE: DATE CODE FORMAT IS AS FOLLOWS: MONTH/DATE/YEAR. EXAMPLE JANUARY 1 ST, 2004 = 01/01/04 REFERENCE ATI M.75.A4
7 SIZE(S): N/A EDP NO PAGE: 7 OF 8 LAYOUT SPECIFICATIONS CONTINUED, WATTS WATER TECHNOLOGIES LOGO RECTANGULAR BOX WATER TECHNOLOGIES WATER TECHNOLOGIES SQUARE BOX
8 Destination: Carton: of PO#: C U T O N D A S H E D L IN E S F O R D IS P L A Y V is i t o u r W e b S it w w w.w a ts w a t e r.c o m PLACE SHIPPING LABEL HERE CUT ON DASHED LINES FOR DISPLAY V is it o ur W e b S w w w.w a ttsw ate r.c om ASSEMBLY AND TEST INSTRUCTION SIZE(S): N/A EDP NO PAGE: 8 OF 8 CUT CASE (UNPERFORATED) OPTION: PANEL #1 PANEL #2 PANEL #3 PANEL #4 SAME AS STANDARD CARTON EXCEPT DASHED CUT LINE AND TEXT CUT ON DASHED LINES FOR DISPLAY TO BE PRINTED IN BLACK AS SHOWN.
TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION PLAQUE, SERVICE AWARD PUBLICATION
TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION TXDOT 080-78-36* AMENDED: NOVEMBER 2004** PLAQUE, SERVICE AWARD PUBLICATION This specification is a product of the Texas Department of Transportation
UBC Logos: Quick Guide
primary logo UBC Full Signature The UBC Full Signature is the primary logo to be used on all applications. Please ensure that the signature is reproduced at a legible size. In instances where the space
Report code: INT23529
Client: HIT PROMOTIONAL PRODUCTS, INC. Vendor: Xiamen Hailight Industry & Trade Co., Ltd. Factory: Tianhui Bag factory Service location: China, Fujian, Quanzhou Start date: 2015-07-02 Result summary Report
MIT ATHLETICS. LOGO STANDARD GUIDELINES
MIT ATHLETICS. LOGO STANDARD GUIDELINES LOGO STANDARD GUIDELINES: TABLE OF CONTENTS Copyright...03 Introduction...04 Our Colors...05 Our Font...06 Primary Mark Full Color...07 Grayscale and Black & White...08
MEMBRANE SWITCH DESIGN OPTIONS
MEMBRANE SWITCH DESIGN OPTIONS Membrane switch technology has become a reliable front panel solution where environmental concerns or frequent cleaning are an issue. The sealed nature of the technology
Shirt. Inspection location: Inspection date: Your reference number:
Inspection Report(PSI) PRODUCT DESCRIPTION O-cn-0934546 Client Name: ABC Textile Company Inc. Product Name: Shirt Inspection location: NingBo Inspection date: 12-31-2011 Your reference number: N/A P/O
SBM-120-UV. Surface Mount Series. Ultraviolet LED. SBM-120-UV Product Datasheet. Features: Table of Contents. Applications:
SBM-120-UV Surface Mount Series Ultraviolet LED Features: Table of Contents General Considerations...2 Binning Structure...3 Part Numbering...4 Ordering Information...4 Optical and Electrical Characteristics...5
QUALITY SCREENPRINTED PRODUCTS SINCE 1949 CUSTOM PRINTING. Signs Decals Nameplates Vehicle Decals and Magnetics
QUALITY SCREENPRINTED PRODUCTS SINCE 1949 CUSTOM PRINTING Signs Decals Nameplates Vehicle Decals and Magnetics 530 East Jamie Avenue La Habra, Ca 90631 Customer Service Order Desk (800) 903-3385 Fax (800)
LOGO USAGE JANUARY 2010 VERSION 2.0 BRAND IDENTITY GUIDELINES 6
LOGO USAGE 6 Elements Arc Arc The Aviat Networks intersecting arcs represent our technology, guiding presence, vision for the future, and wireless network connections. Logotype Logotype The logotype for
FILE ASSEMBLY GUIDE. ~ File Assembly Guidelines ~
To reduce your costs in prepress and turn-around time for proofs, Standard Printing Company recommends using the following information as a guide for correct file assembly: Acceptable File Formats QuarkXpress
20 x 20 Orbital Truss - OT Vesta
2 x 2 Orbital Truss - OT22-22 - Vesta Orbital Express Truss features over professionally designed off-theshelf kits for a variety of booth sizes and configurations. Each kit comes complete with all the
features and benefits:
Gemini OR-K-GE1 Orbital Express Truss features over professionally designed off-theshelf kits for a variety of booth sizes and configurations. Each kit comes complete with all the parts, fixtures and fittings
Joint Research Centre Institute for Prospective Technological Studies
Joint Research Centre Institute for Prospective Technological Studies www.jrc.ec.europa.eu The European Commission s in-house science service Serving society Stimulating innovation Supporting legislation
Label Artwork & Film Requirements - Silkscreen Printing
Label Artwork & Film Requirements - Silkscreen Printing GENERAL INFORMATION The following specifications apply to the creation of label artwork and submission of corresponding film for use in GenTEK s
panthers high point university athletics
panthers high point university athletics Logo Standards 2004 Pantone Matching System (PMS) Color Chart hpu purple pantone 2685 4-color equivalent: C=96, M=100, Y=0, K=10 hpu purple highlight pantone 2665
3. When you import the scanner for the first time make sure you change it from Full Auto Mode to that of Professional Mode.
PhotoShop Tutorials Scanning Photographic Film WorkFlow 1. Open PhotoShop 2. File > Import > choose scanner 3. When you import the scanner for the first time make sure you change it from Full Auto Mode
Trademark Usage Guidelines. OEM Automotive
Trademark Usage Guidelines OEM Trademark Usage Guidelines OEM Automotive Rev. 03 April 2017 ibiquity Digital Corporation 6711 Columbia Gateway Drive Suite 500 Columbia, Maryland 21046 USA 443.539.4290
Spirit Logos 2016 IDENTITY GUIDE SUPPLEMENT
Spirit Logos 2016 IDENTITY GUIDE SUPPLEMENT Spirit Logo Guidelines There are two spirit logos in the University of Rochester s graphic identity system: the Spirit R logo and the Rocky logo. The spirit
PROPA01 SQA Unit Code (H7V0 04) Print production processes
Overview This standard is for entrants to the printing industry who will be employed within the administration department of the company. The intention is to give learners a basic competency and working
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in Arcoaire brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements Crest
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in Comfortmaker brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements
Identity Guidelines 02 Signature. 03 Clear Zone and Sizing 04 Trademark 05 Configurations 06 Restrictions 07 Color Palette 08 Acceptable Usage
Identity Guidelines 02 Signature 03 Clear Zone and Sizing 04 Trademark 05 Configurations 06 Restrictions 07 Color Palette 08 Acceptable Usage Signature The term signature commonly refers to a basic configuration
September 2011 Club Scrap Orient Express
September 2011 Club Scrap Orient Express Materials: Orient Express CS Kit Orient Express Embellishment Pack Orient Express Unmounted FontArt and Borders & Backgrounds Orient Express Club Scrap Unmounted
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in KeepRite brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements Crest
To define minimum workmanship standards for cartons and related items produced by Warneke Paper Box Company.
Page 1 of 5 1.0 PURPOSE 2.0 SCOPE To define minimum workmanship standards for cartons and related items produced by Warneke Paper Box Company. Applies to all items produced by Warneke Paper Box Company.
LABELS SPECIAL PROGRAM PRICING
LABELS SPECIAL PROGRAM PRICING 2017-2018 HOW TO ORDER 1. Select your shape and size For additional sizes and shapes not offered in this catalog, contact your sales representative. 2. Indicate your ink
Price Book. Table of Contents
2019 Price Book Table of ontents NEW Small Quantity - Made in USA Page 1 ustom Matchbooks - Made in USA Page 2 Stock Imprint Matchbooks - Made in USA Page 3-4 ustom Matchboxes - Made in USA Page 5 Imported
IDENTITY GUIDELINES AND GRAPHIC STANDARDS MANUAL SPRING 2017
IDENTITY GUIDELINES AND GRAPHIC STANDARDS MANUAL SPRING 2017 THE IMPORTANCE OF GRAPHIC STANDARDS The United Mail logo is our unique graphic signature. It is one of the most visible aspects of the company
features and benefits:
Hercules 12 OR-K-HC12 The Hercules line of Orbital Express Truss features basic backwalls and kits in a variety of sizes to suit a range of space needs. A benefit to this versatile system is that it enables
OUR PRODUCTS ARE GREAT FOR
2017 Presorted Standard U.S. Postage PAID Permit #131 Marquette MI 49855 OUR PRODUCTS ARE GREAT FOR DON ANDERSON VOTE FOR the best choice by any measure! for District Representative 13 14 16 17 8 22 23
features and benefits:
Ara OR-K-AA1 The Planetary line of Orbital Express Truss features over 4 professionally designed off-the-shelf kits for a variety of booth sizes and configurations. Each kit comes complete with all the
STEAM BRANDING GUIDELINES. Revised December 6, 2017
STEAM BRANDING GUIDELINES Revised December 6, 2017 CONTENTS Branding Assets 1 General Guidelines 2 1 STEAM SYMBOL AND LOGO Hardware Application 4 On-screen and Printed Applications 6 2 STEAM MACHINES LOGO
PLANNED SIGN PROGRAM CHECKLIST
Planning and Building Agency Planning Division 20 Civic Center Plaza P.O. Box 1988 (M-20) Santa Ana, CA 92702 (714) 647-5804 PLANNED SIGN PROGRAM CHECKLIST Applicant, please return this checklist with
Orbus Zenit Truss Kit
Orbus Zenit Truss Kit OEZNKIT - Kit includes: 4 x 6-way junction boxes x 4 straight truss lengths x 3 straight truss lengths 1 x 36 straight truss lengths 16 x 46 straight truss lengths x 9º curved truss
SECTION III-COMMUNICATION & EXPRESSIVE ARTS
Dept. B - Photography General Photography Rules SECTION III-COMMUNICATION & EXPRESSIVE ARTS 1. Entry Tags: Entry Tag must be securely attached to the upper right hand corner of displays or prints. 2. A
Visual Guidelines Updated: April 1, 2016
Visual Guidelines Updated: April 1, 2016 Logo Visual Guidelines/Logo Primary Logo Iconic Red M Logo This logo is the official primary logo for the Merillat brand. The red is Pantone 485, the Merillat word
Graphic Standards Guide
Graphic Standards Guide Purpose of this document This graphic standards guide is designed to assist CACCN members, staff and contracted suppliers in maintaining a consistent usage of the elements of the
Custom Rubber Stamps. 1-2 Self-Inking Stamps. 3-4 Ultimark & Ultifast Pre-Inked Stamps. 5 Die Plate Daters
Custom Rubber Stamps 1-2 Self-Inking Stamps More options. Greater printing solutions. 3-4 Ultimark & Ultifast Pre-Inked Stamps 5 Die Plate Daters 6-7 Wooden Handle Stamps, Ink Refills, Custom Services,
Artwork Preparation Guide
Artwork Preparation Guide General notes Artwork Preparation Guide Size, Position and Order When displaying a series of card symbols together, the following rules apply: No logo should occupy a prominent
Art Guidelines. Overview. Process. Acceptable File Types/Programs
Art Guidelines Overview Our Graphics Department works seamlessly with Customer Service and our Sales Representatives. Once you have had a project quoted and are ready to submit your PO and art, we are
VISUAL IDENTITY MANUAL
VISUAL IDENTITY MANUAL Table of Contents i. Contents ii. About Us ii. Guideline Introduction Chapter 1 Masterbrand Chapter 2 Stationery System Chapter 3 Internet IN DEVELOPMENT Chapter 4 Presentations
Crop, Resize, and Recolor an Image in MS Word by Debra Laraway
Crop, Resize, and Recolor an Image in MS Word by Debra Laraway This tutorial presumes you have used MS Word and can create a basic document. Do keep in mind that Word is not a graphics program. You can
are made from high grade tinplate which offers the highest print quality and finish. Our Watch Packaging Tin Boxes feature CMYK printing as well as
Hinged tins Millions of Stock Items Ready to Ship Daily! Questions? We have the answers - 800-221-0999. Freund is one of America's top suppliers of wholesale packaging & containers, including tins since
UESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN6.6.6 UESD64B SC89-5/SOT553/SOT665 General Description The
UESD54B/55B/56B/57B/64B
Quad/Five/Six Line ESD Protection Diode Array UESD54B SC70-5/SC88A/SOT353 UESD55B SC89-6/SOT563/SOT666 UESD56B SC89-6/SOT563/SOT666 UESD57B DFN66-6L UESD64B SC89-5/SOT553/SOT665 General Description The
Sketching in SciTech. What you need to know for graphic communication
Sketching in SciTech What you need to know for graphic communication Sketching in your Logbook Use pencil Take up the WHOLE PAGE Label things 1. Proportion Each part of the sketch is the right size,
GRAPHIC IDENTITY MANUAL
GRAPHIC IDENTITY MANUAL GRACELAND UNIVERSITY GRAPHIC IDENTITY 2 INTRODUCTION The Graceland University Graphic Identity Standards Manual was created to provide all Graceland University employees and associates
BRAND GUIDELINES California College of the Arts
October 2016 BRAND GUIDELINES A LOGO. A TYPEFACE. A PHOTO. A VOICE. Together these tools can paint a picture of California College of the Arts that is accurate, aspirational, and as awesome as we are.
Paper Sticker Sheets - Multiple stickers per 8.5 x 11 sheet (indoor use)
604-872-3231 1-888-872-3231 www.printedpromoproducts.ca 25 Paper Sticker Sheets - Multiple stickers per 8.5 x 11 sheet (indoor use) Printed on uncoated white stock with permanent adhesive. Production time
GFS Canada Brand Packaging Print Standards Exhibit
GFS Canada Brand Packaging Print Standards Exhibit Gordon Signature One of the following options is required. Option 1: Fully printed oyster-white corrugate with 2-colours (GCMI 517 Gold, GCMI 90 Black).
contents ridges on sides for non-slip grip black item number designates the new mount easy slide out ink cartridge with safety catch feature
PRODUCT CATALOG contents item page P series custom message stamps 3-4 P series eco custom message stamps 5 M series custom message stamps 6 M series custom date stamps 7 P series custom date stamps 8 M
BAE Systems Combat Vehicles Supplier Quality Assurance AS9102 Requirement
1 BAE Systems Combat Vehicles Supplier Quality Assurance AS9102 Requirement February 27, 2019 2 Scope The intent of this document is to provide an understanding, and clarification as to what BAE Systems
Press-Ready Folder Guide
Press-Ready Folder Guide Our online system enables you to upload logos, images, and text to build folder parts (front, back, pockets, and handbook). You may also upload completed press-ready parts. Press-ready
MNAO ACCESSORY OPERATIONS. GENUINE ACCESSORIES Packaging Guidelines
MNAO ACCESSORY OPERATIONS GENUINE ACCESSORIES Packaging Guidelines 1 Introduction The brand Mazda has become a mark of excellence worldwide. With a rich history in technology development and a wide variety
1 Requirements to imposition and design of polygraphic production
I. REQUIREMENTS TO GIVEN INITIAL MATERIALS 1 Requirements to imposition and design of polygraphic production 1.1 The Size of production before cropping, allowances on cropping, and the size of sealed area,
General Certificate of Secondary Education June 2013
Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials Question Mark General Certificate of Secondary Education June 2013 Engineering 48501 Unit 1
Wayfinding Signage Wesbrook Village, UBC
Wesbrook Village, UBC PUBLIC ARCHITECTURE + COMMUNICATION MAY 14, 2015 DEVELOPMENT PERMIT SL 2.0 SL 1.0 Two-sided Copyright reserved. This design and drawing is the SL 4.0 NO DESCRIPTION North Side SL
Estates Development & Projects
Estates Development & Projects Production Guidelines for the Building Fabric Manual (incorporating Health & Safety File) Guidance for the Technical Author REVISION 10.2 Issue Date 09/2017 Contents Part
November 2012 Club Scrap Equestrian Materials: Equestrian CS Kit with Embellishment Pack
November 2012 Club Scrap Equestrian Materials: Equestrian CS Kit with Embellishment Pack Additional Kit Items: Equestrian CS Unmounted (UM) Stamps Equestrian UM FontArt Equestrian UM Borders & Backgrounds
Keith & Arthur 2016 County & State Fair Book
Keith & Arthur 2016 County & State Fair Book Department B: Communications & Expressive Arts Division 150 Banner/Booth/Club Exhibit B150901 Banner 1. Each banner should illustrate a phase of 4-H work or
COMMUNICATION & EXPRESSIVE ARTS PHOTOGRAPHY
COMMUNICATION & EXPRESSIVE ARTS CHECK IN: Wednesday, July 11, 2018 from 6:30-8:30 p.m. & Thursday, July 12, 2018 from 7:30 8:30 a.m. JUDGING TIME: Thursday, July 12, 2018, 9:00 a.m. (closed to public)
Step 1: Set up the variables AB Design. Use the top cells to label the variables that will be displayed on the X and Y axes of the graph
Step 1: Set up the variables AB Design Use the top cells to label the variables that will be displayed on the X and Y axes of the graph Step 1: Set up the variables X axis for AB Design Enter X axis label
Description: General Requirements for Corrugated Fiberboard Items Furnished to 3M
Corporate General Specification Package Engineering St. Paul, MN 55144-1000 100 Description: General Requirements for Corrugated Fiberboard Items Furnished to 3M Specification No.: 100 Status: Phase-Out
HL1361BRxx-Lx DFB Laser Diode Chip Bar
HL1361BRxx-Lx DFB Laser Diode Chip Bar Sample Categories and Disclaimer Functional sample that has the suffix of -F or -Fx to the product number is a sample that is designed according to the customer s
Jointing Rural Intersections
Design Manual Chapter 5 - Roadway Design 5G - PCC Pavement Joints 5G-4 Jointing Rural Intersections This section describes how to joint rural intersections by following the guidelines outlined in Iowa
B. Embossing. 1. Description. a. Embossing
B. Embossing 1. Description a. Embossing Often used in combination with foil stamping, embossing is a process that applies pressure to the backside of a material to alter the surface, giving it a three
The Exhibit: September 14 to October 14, Opening Reception: Friday, September 14th, 6:30 to 8:30 PM. Call for Artists
The Exhibit: September 14 to October 14, 2018 Opening Reception: Friday, September 14th, 6:30 to 8:30 PM Call for Artists Welcome to our sixth annual Poetry & Art exhibit! After five successful and moving
ETCHED PLAQUES by Matthews International
ETCHED PLAQUES by Matthews International Note: These specifications were current at the time of publication but are subject to change without notice. Please confirm the accuracy of these specifications
Preparing Files for Press Printed Products. Press Printed Cards. Key Points. Sizing and Bleed. Download Free Sizing Templates
Preparing Files for Press Printed Products Press Printed Cards Key Points Sizing and Bleed All of our Press Printed Products are printed as full bleed products. This means that final trimmed product can
Quick Printable (And Online) Puzzles
Quick Printable (And Online) Puzzles While making an online puzzle, I stumbled onto a way to make a printable puzzle at the same time! You can even make versions of the same puzzle with varying numbers
Industrial Product Guide Marking, Coding & System Solutions
Ink Jet. Laser. Thermal Transfer. Labelers. Track & Trace. Supplies. Parts & Service. Industrial Product Guide Marking, Coding & System Solutions Videojet 1220 Ink Jet Printer This continuous ink jet printer
National Quali cations Date of birth Scottish candidate number
N5FOR OFFICIAL USE X835/75/0 National Quali cations 208 Mark Graphic Communication THURSDAY, 0 MAY :00 PM 3:00 PM *X835750* Fill in these boxes and read what is printed below. Full name of centre Town
Tools and Supplies: 12 Paper Trimmer Adhesive Tape 3x13 CS Grid Ruler Mini Brads
March 2012 Club Scrap Tahiti Materials: Tahiti CS Kit Tahiti Embellishment Pack Tahiti Unmounted Borders & Backgrounds and FontArt Tahiti CS Unmounted Stamps Tools and Supplies: 12 Paper Trimmer Adhesive
RC205 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER. VOLTAGE 600 Volts CURRENT 2.0 Amperes RC-2
RC25 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 6 CURRENT 2. Amperes FEATURES * Reverse voltage to 6v * Surge overload ratings to 5 amperes peak * Good for printed circuit board assembly
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-01 58 00 (August 2009) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-01 58 00 (August 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
Design Documents for Wayfinding
Design Documents for Wayfinding 11-11-08 FOR FHWA SUBMITTAL 1 2 3 4 5 6 7 8 9 1st AVENUE WEST 3rd AVENUE WEST A B C D E F G H I 15th STREET WEST 14th STREET WEST Historic 2nd AVENUE WEST BARCARROTA BOULEVARD
Brand identity toolkit
Our visual identity Brand identity toolkit Typography Photography Lyon Display Medium ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 Akkurat Regular ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
Chapter 6. Architectural Lines and Lettering
Chapter 6 Architectural Lines and Lettering Drafting Introduction Universal graphic language Uses lines, symbols, dimensions, and notes to describe a structure to be built Properly drawn lines are dark,
Medium Flat Panel Universal Interface Bracket (MSB-V)
INSTALLATION Medium Flat Panel Universal Interface Bracket () INSTRUCTIONS The interface bracket functions as the universal mounting solution for medium flat panel displays. The is compatible with a multitude
Printed Label Information. Everything you need to know about our label printing service
Printed Label Information Everything you need to know about our label printing service Label Printing A Quick Guide To Label Printing Printing Technique Our label printer uses Memjet technology, allowing
Applications should be ed to:
REQUEST FOR QUALIFICATIONS (RFQ) City of Fort Collins, Colorado Art in Public Places Program (APP) 2013 Transformer Cabinet Mural Project (7461) Budget: Minimum of $1,000 per artist The Art in Public Places
1. Describe how a graphic would be stored in memory using a bit-mapped graphics package.
HIGHER COMPUTING COMPUTER SYSTEMS DATA REPRESENTATION GRAPHICS SUCCESS CRITERIA I can describe the bit map method of graphic representation using examples of colour or greyscale bit maps. I can describe
Creating another Printed Circuit Board
Appendix C Creating another Printed Circuit Board In this chapter, we will learn the following to World Class standards: Starting with a Finished Schematic Creating the Layers for the Printed Circuit Board
CUSTOM ARTWORK INSTRUCTIONS
CUSTOM ARTWORK INSTRUCTIONS Instructions for Customization of Products To submit a new art file for printing, please provide the following file type in black and white only: Adobe Illustrator, or EPS file
PRODUCT OVERVIEW NS MULTI
-Digital Printer -MEMJET technology -Water based inks -5 colors (CMYKK) -10 liter ink per color -lamination module (optional) -user friendly software -RIP caldera -Resolution 1600x1600 dpi Quality Mode
STP357: Setting Alert Profile (Supplier)
SAP Training Source To Pay STP357: Setting Alert Profile (Supplier) External User Training Version: 5.5 Last Updated: 21-Jun-2018 3M Business Transformation & Information Technology Progress set in motion
DETAIL SPECIFICATION SHEET HINGE, BUTT STRUCTURAL, EXTRUDED
INCH-POUND MS20001P 21 May 2012 SUPERSEDING MS20001N 16 November 2010 DETAIL SPECIFICATION SHEET HINGE, BUTT STRUCTURAL, EXTRUDED This specification sheet is approved for use by all Departments and Agencies
COPYRIGHT. Limited warranty. Limitation of liability. Note. Customer remedies. Introduction. Auto-Digitizing 24-Aug-16 ii
AUTO-DIGITIZING Introduction COPYRIGHT Copyright 1998-2016. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. All title and copyrights in and to Digitizer Embroidery Software (including
Your tattoo is one-of-a-kind. Why shouldn t your flooring be? Custom Printed Flooring. A portfolio of what has inspired you.
Your tattoo is one-of-a-kind. Why shouldn t your flooring be? Custom Printed Flooring. A portfolio of what has inspired you. Joe s Apartment Studio Records Vancouver night club and music venue An Oriental
Photoshop Study Notes and Questions
Copyright Law The World Intellectual Property Organization (WIPO) Copyright treaty restrict the use of copyrighted material without first getting permission. Printing Soft proof (viewing on screen) allows
Engineered construction creates a natural V shape in the lanyard which helps prevent ID card from twisting and turning when worn around the neck.
Engineered construction creates a natural V shape in the lanyard which helps prevent ID card from twisting and turning when worn around the neck. Standard Styles Cordlocks... allow the wearer to adjust
Configuring User Settings at the Scan Station
Configuring User Settings at the Scan Station Contents Touchscreen configurations... 2 Getting familiar with the touch screen... 4 Destination screen... 4 Icon descriptions: Destination screen... 5 Settings
CURRICULUM MAP. Standards Content Skills Assessment E4. Evaluate the purpose and
CURRICULUM MAP Course/ Subject: Graphic Design I Grade: 9-12 Month: September Enduring Understanding Technology is created, used and modified by humans. A technological world requires that humans develop
ACCESSORIES. Factory-Installed Glazing
ACCESSORIES Affordable Options from VT With options such as factory-installed glazing, applied mouldings and factory-installed louvers available from VT Industries, you can achieve the look you want with
Marketing Guidelines. Disney Meetings Catered Events Group Tickets
Marketing Guidelines Disney Meetings Catered Events Group Tickets Disney DMMG04-2018 1 Content 1.0 Introduction...3 2.0 Approval Process...4 3.0 Marketing Guidelines at a Glance...5 4.0 Logos...6 5.0 Imagery
2.1. The Corporate Signature and Colors
The Corporate Signature and Colors 2.1 The Southern States signature is the foundation for our brand identity system. Proper use of the signature is fundamental to the success of all applications. The
THE PARTNERSHIP FOR THE EAST ASIAN-AUSTRALIASIAN FLYWAY LOGO
Partnership of the East Asian-Australasian Flyway I LOGO Guide THE PARTNERSHIP FOR THE EAST ASIAN-AUSTRALIASIAN FLYWAY LOGO Pantone 654 Process C: 100 / M: 67 / Y: 0 / K: 38 Web Safe R: 0 / G: 51 / B:
CONTINUED ON NEXT PAGE..
REVISION RECORD REV DESCRIPTION DATE 0 INITIAL RELEASE 07/23/96 A PAGE 2: ADDED PARAGRAPHS 3.2.1, 3.2.2, AND 3.2.3. PARAGRAPH 3.3.b, ADDED SEE PARAGRAPH 3.2. 12/11/97 PAGE 3: ADDED PARAGRAPHS 3.8.1, 3.8.2,
CBM-120. Mosaic Array Series Far Red Chip On Board LEDs. CBM-120-FR CBT-120 Product Datasheet. Features: Table of Contents.
CBM-120-FR CBT-120 Product Datasheet CBM-120 Mosaic Array Series Far Red Chip On Board LEDs Features: Mosaic Array Far Red LED chipset with surface emitting area of 12 mm 2, 4:3 aspect ratio Table of Contents
web MASTERBRAND MARK GUIDELINES
02.2013 web MASTERBRAND MARK GUIDELINES The Masterbrand Mark The Carestream Masterbrand Mark is more than just our logo. It s the foundation on which our powerful brand communications are built. Our Masterbrand