EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice
|
|
|
- Maryann Summers
- 6 years ago
- Views:
Transcription
1 EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice Czech Republic
2 EvektorAerotechnik a.s. 2005
3 0. GENERAL This Spare Parts Catalogue serves to allow order some selected spare parts from the aircraft manufacturer. For parts order use Spare Parts Order form enclosed in Appendices of the Aircraft Maintenance and Inspection Procedures. State part description, order No., required quantity and other information required in this form. If you require other parts then is mentioned in this catalogue, do not hesitate contact us. Aircraft manufacturer: EVEKTOR AEROTECHNIK a.s. Letecka Kunovice CZECH REPUBLIC tel.: fax:
4 0.1 Table of contents 0. GENERAL Table of contents Aircraft assembly Record of revison List of Effective Pages FUSELAGE Tilting canopy Canopy lock Rear part of fuselage WING TAIL UNITS CONTROLS LANDING GEAR Nose landing gear Main landing gear Tyre / tube Wheel pants Brake system (four pumps system) Brake pump (E /02) Double brake pump (E /02) POWER UNIT Exhaust system INSTALLATIONS Electrical system COCKPIT EQUIPMENT OPTIONAL EQUIPMENT Ground equipment
5 0.2 Aircraft assembly 1 FUSELAGE 2 WING 3 TAIL UNITS 4 CONTROLS 5 LANDING GEAR 6 POWER UNIT 7 INSTALLATIONS 8 COCKPIT EQUIPMENT 9 OPTIONAL EQUIPMENT 03
6 0.3 Record of revison Any revisions or amendments to these instructions shall be issued in the form of revision with attached new pages. It is in the interests of every user to enter such revision into the table of revisions and to replace the existing page by the new one. The revised or corrected text shall be indicated by a vertical line on the page foreedge and the page shall bear a revision number and date of its issue. Rev. No. Affected Section Affected Pages Date of Issue Insertion Date Signature 04
7 0.4 List of Effective Pages Sec. Page Date Sec. Page Date Sec. Page Date Sec. Page Date Cover page 5 51 Aug 15/05 52 Aug 15/05 53 Aug 15/05 54 Aug 15/ Aug 15/05 55 Aug 15/05 02 Aug 15/05 56 Aug 15/05 03 Aug 15/05 57 Aug 15/05 04 Aug 15/05 58 Aug 15/05 05 Aug 15/05 06 Aug 15/ Aug 15/05 12 Aug 15/05 13 Aug 15/05 14 Aug 15/ Aug 15/05 62 Aug 15/ Aug 15/05 72 Aug 15/ Aug 15/05 22 Aug 15/ Aug 15/05 82 Aug 15/ Aug 15/05 32 Aug 15/ Aug 15/05 42 Aug 15/ Aug 15/05 92 Aug 15/05 93 Aug 15/05 94 Aug 15/05 05
8 Intentionally left blank 06
9 1. FUSELAGE 1.1 Tilting canopy Pos. Description Standard Qty. Order num. Note 1 CLEAR VENTING WINDOW LH CLEAR VENTING WINDOW RH SMOKED VENTING WINDOW LH SMOKED VENTING WINDOW RH FLAP FOR VENTING WINDOW LH FLAP FOR VENTING WINDOW RH GAS STRUTBANSBACH
10 1.2 Canopy lock Pos. Description Standard Qty. Order num. Note 9 WELDED UPPER PIN 1 E RING 1 E ASSEMBLED HANDLE 1 E CANOPY LOCK ASS. 1 E PIN 3m6x SCREW M3x
11 1.3 Rear part of fuselage Pos. Description Standard Qty. Order num. Note 1 TAIL SKID 1 E BLIND RIVET 3.2x7.9 AVEX
12 Intentionally left blank 14
13 2. WING Pos. Description Standard Qty. Order num. Note 1 WING TIP LH 1 S WING TIP RH 1 S WING TIP FOR POSITION LIGHT LH 1 E WING TIP FOR POSITION LIGHT LH 1 E BLIND RIVET 3.2x7.9 AVEX for one wingtip 1 21
14 Intentionally left blank 22
15 3. TAIL UNITS Pos. Description Standard Qty. Order num. Note 1 STABILIZER S assembled 2 ELEVATOR S RUDDER E
16 Intentionally left blank 32
17 4. CONTROLS It will be amended later 41
18 Intentionally left blank 42
19 5. LANDING GEAR 5.1 Nose landing gear Pos. Description Standard Qty. Order num. Note 1 NOSE LANDING GEAR 1 S SPACER 1 S SMALL SPACER 1 S STOP 2 S ROD 12 1 E WHEEL AXE 1 SG BOLT 1 SG WASHER NOSE WHEEL ASSY 1 E TUBE 1 E TUBE 1 E EYE L 1 S EYE R 1 S ROD 12 1 E RUBBER WASHER 1 S STRIP 2 S STRIP 2 S NOSE LANDING GEAR SLEEVE 1 S BACKSTOP MODIFIED 1 E RUBBER ROPE HOSE CLAMP SCREW M6x12 BN SCREW 6x23 ONL NUT M6 CSN CABLE TIE PLT1,5IC TIGHTENING STRIP HN WASHER 6 CSN WASHER 6.4 CSN COTTER PIN 1.6x14 CSN COTTER PIN 2.5x25 CSN RING LOCK 10 CSN WIRE KR 0.8 CSN MOLYKAPASTE LOCKTITE GLUE
20 52
21 5.2 Main landing gear Pos. Description Standard Qty. Order num. Note 1 LEFT WHEEL WITH BRAKE 1 E RIGHT WHEEL WITH BRAKE 1 E NUT 2 E WASHER LEG LEFT ASSEMBLY 1 S LEG RIGHT ASSEMBLY 1 S YOKE 2 SG SHIM 2 SG YOKE 2 SG BOLT 2 SG COTTER PIN 4x40 CSN NUT M8 CSN WASHER 8.4 CSN COTTER PIN 2x20 CSN BOLT M8x60 CSN Tyre / tube Pos. Název/Description Norma/ Standard Mn./Qty. Obj. číslo/order num. Pozn./Note CHENG SHIN TYRE13x5, front wheel CHENG SHIN TUBE13x5, front wheel CHENG SHIN TYRE15x6, main wheel CHENG SHIN TUBE15x6, main wheel
22
23 5.4 Wheel pants Pos. Description Standard Qty. Order num. Note 1 NOSE WHEEL COVER 1 S MAIN WHEEL COVER LH 1 E MAIN WHEEL COVER RH 1 E
24 5.5 Brake system (four pumps system) Pos. Description Standard Qty. Order num. Note 1 COMPLETED DOUBLE PUMP LH 1 E COMPLETED DOUBLE PUMP RH 1 E BRAKE PUMP 2 E BRAKE PAD for one wheel 5 COTTER PIN 2x14 CSN for one wheel 6 BRAKE STIRRUP LH BRAKE STIRRUP RH
25 5.5.1 Brake pump (E /02) Pos. Název/Description Norma/Standard Qty. Obj. číslo/order num. Note 1 HOLDER 1 E ACTUATOR 1 E glued 3 PLUG 1 E PISTON 1 E RING 20x CUFF U 11x3x4.5 RUBENA SPRING 1 E SHIM 1 E RING 7 CSN NUT M6 CSN FORK WITH PIN 6x12 DIN BN484, BN COVER 1 E SCREW M4x5 DIN A2F
26 5.5.2 Double brake pump (E /02) Pos. Název/Description Norma/Standard Qty. Obj. číslo/order num. Note 1 BRAKE PUMP HOUSING E TUBE E PISTON E CYLINDER PLUG E SECURING NUT E PISTON E BRAKE CYLINDR FILLING E BOLT E PRUŽINA E PRUŽINA E FORK WITH PIN 6x RING LOCK RING 4x RING 7.3x RING 11.3x RING 5.6x
27 6. POWER UNIT 6.1 Exhaust system Pos. Název/Description Standard /Qty. Order num. Note 1 VÝFUK SVAŘENEC 1 EXHAUST MUFFLER VÝFUK PŘEDNÍ L 1 LH FRONT EXHAUST GAS TUBE E VÝFUK ZADNÍ L 1 LH REAR EXHAUST GAS TUBE E VÝFUK PŘEDNÍ P 1 RH FRONT EXHAUST GAS TUBE E VÝFUK ZADNÍ P 1 RH REAR EXHAUST GAS TUBE E SVORKA M08 4 CLAMP M Figure: Exhaust system 01 Exhaust muffler 02 LH front exhaust 03 LH rear exhaust 04 RH front exhaust 05 RH rear exhaust 07 Clamp 4 pcs 61
28 62
29 7. INSTALLATIONS 7.1 Electrical system Pos. Název/Description Norma/Standard Mn./Qty. Obj. číslo/order num. Pozn./Note 1 CIRCUIT BREAKER 1A CIRCUIT BREAKER 2A CIRCUIT BREAKER 3A CIRCUIT BREAKER 7.5A CIRCUIT BREAKER 10A CIRCUIT BREAKER 30A MASTER SWITCH 2PDT SWITCH 1PDT RELAY 12V/30A LAMP FOR WHELEN A715 Q4509 PAR LAMP FOR FRONT REFLECTORS 50W Note: Current value is imprinted on the circuit breaker button. 2 6 Circuit breakers positions from 1 to 5 are identical in the dimensions
30 Intentionally left blank 72
31 8. COCKPIT EQUIPMENT Pos. Description Standard Qty. Order num. Note 1 BUCKET SEATSQUAB LH 1 E BUCKET SEATSQUAB RH 1 E BUCKET SEATBOLSTER LH 1 E BUCKET SEATBOLSTER RH 1 E CONTROL STICK SLEEVE 1 E CARPET 1 E FOUR POINT SAFETY HARNESS 1 E BUCKET SEATSUPPORTING REST 1 E BAFFLE ASSEMBLY LH 1 E BAFFLE ASSEMBLY RH 1 E CAPPING STRIP ASSEMBLY FRONT CARPET 1 E BAFFLE ASSEMBLY LH 1 S BAFFLE ASSEMBLY RH 1 S
32 will be amended later will be amended later 82
33 9. OPTIONAL EQUIPMENT 9.1 Ground equipment Pos. Název/Description Norma/Standard Mn./Qty. Obj. číslo/order num. Pozn./Note 1 CANOPY COVER WIDE 1 E SLE EVE FOR EQUIPMENT FIXING STRAP ASSEMBLY GROUND ANCHOR FOLDING TRIG BIG BAG DRAWBAR 1 E SPARE CONNECTING PARTS SET S S see next page 9 SUN SHADE VALVE EXTENSION for front tire 11 PITOT TUBE COVER 1 S SET OF METRIC WRENCHES AND ALLEN WRENCHES 1 set
34
35 Spare connecting parts S S Pos. Description Qty. Order num. Use 5 BOLT M4X12 MM engine cowling, wing to fuselage fairing 10 BOLT (FLUSH HEAD) M4X12 MM removable upper cover in front of cockpit 16 RING 4X2 MM double hydraulic brake pump 17 RING 7.3X2.4 MM double hydraulic brake pump 18 RING 11.3X2.4 MM double hydraulic brake pump 19 RING 5.6X2.4 MM double hydraulic brake pump 20 BOLT M4X16 MM to fix main wheel pants 21 CASTLE NUT M6 MM flight control, rudder attachment 22 CASTLE NUT M8 MM to fix main landing gear leg 23 SELF LOCKING NUT M4 MM flight control 24 SELF LOCKING NUT M5 MM flight control 25 SELF LOCKING NUT M6 MM flight control 26 WASHER 4.3 MM under appropriate nut 27 WASHER 5.3 MM under appropriate nut 28 WASHER 6.4 MM under appropriate nut 29 WASHER 8.4 MM under appropriate nut 30 COTTER PIN 1X12 MM to lock rudder nut 31 COTTER PIN 1.6X20 MM to lock flight control elements 32 COTTER PIN 2X20 MM to lock stabilizer and main landing gear leg attachment 33 COTTER PIN 2.5X25 MM to lock front landing gear leg 38 COTTER PIN4X40 MM to lock wheel nuts 59 TAB WASHER 6.2 MM to lock nuts of the flight control elements 64 BOLT M8X12 MM to fix brake disc 74 TAB WASHER 8.2 MM to lock brake disc bolts 79 SAFETY PIN 1.5 MM to lock wing suspension pins 80 RING CUP 11X3X4.5 MM hydraulic brake pump 84 RING 20X1.5 MM hydraulic brake pump
36 Intentionally left blank 94
EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice
EVEKTOR AEROTECHNIK a.s. tel.: +420 572 537 111 Letecka 1384 fax: +420 572 537 900 686 04 Kunovice e-mail: marketing@evektor.cz Czech Republic http://www.evektor.cz EVEKTOR - AEROTECHNIK a.s. 2011 0. General
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
Parts Catalog Admiral 28 Cylindrical Scrubber
Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14
Parts Catalog Apex 47 Series Model Gasoline & LPG
Parts Catalog Table of Contents Side brush R.H. (97085690)... 4 Front wheel drive (97086235)... 8 Travelling mechanism (Part 1) (97077168-1)... 12 Travelling mechanism (Part 2) - Accelerator (97077168-2)...
PARTS MANUAL Rev A
PARTS MANUAL 4000394 Table of Contents Part Index for Trailer --------------------------------------------- 2 Trailer Figure ----------------------------------------------------- 6 Trailer Figure 2 -----------------------------------------------------
Diesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
Zodiac CH 601 XL drawing revision log, updates included in 4 th Edition, January 1, 2008.
Zodiac CH 601 XL drawing revision log, updates included in 4 th Edition, January 1, 2008. 6-X-0 6-X-1 6-T-0 6-T-1 6-T-2 6-T-3 6-T-4 6-T-5 6-T-6 6-W-0 6-W-00 6-W-1 6-W-2 6-W-3 6-W-4 6-W-5 6-W-6 01/08 DRAWING
Parts Catalog Collector 34 Model Battery
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
TIGER MOTH 120 ASSEMBLY INSTRUCTIONS
TIGER MOTH 120 ASSEMBLY INSTRUCTIONS SPECIFICATIONS Wing Span: Length: Radio: Flying Weight: 1920mm 1580mm 4 channel with 6 servos 4200g AILERON ASSEMBLY 1 Start by removing the servo cover from the bottom
Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251
PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve
ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL REV.
Parts Manual Models ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL 106149 REV. 04 (10/09/02) Model Number: Serial Number: Date of Purchase:
TROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts...
R Ingersoll HOME TRACTORS 52SD, 62SD and 72SD INDEX 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts... 3 Pulleys, Blades, Belts, Spindles and Attaching Parts... 5 62SD Mower Deck
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
red rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
Parts Manual 2200 Bale Hiker
Parts Manual 2200 Bale Hiker Part Number K56202-02B IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
MMZ jr Hydrostatic Zero-Turn Riding Mower
MMZ jr. Hydrostatic Zero-Turn Riding Mower MODEL ABM HP " Stamped Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS " Cutter Deck............................. and " Spindle Assembly.........................
Signature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
Parts Catalog Collector 34 Model Gasoline
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
Illustrated Parts: Model 853
Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3
Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today
Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...
Copyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
Parts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog
R Ingersoll CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog 8-3291 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Body, Hopper and Shredder Hammers...5 Chipper Assembly...7 Trailer
Electronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
Parts Manual SPDZTR 42 / SPDZTR 42 BF /
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to
PARTS MANUAL WARNING GTWY8-1200/ GTWY / GTTWY / AREAL WORK PLATFORMS
R PARTS MANUAL GTWY8-1200/ GTWY10-1200/ GTTWY12-1200/ 14-1200 AREAL WORK PLATFORMS WARNING For AWP S THE MANUFACTURER SHALL NOT BE HELD LIABLE IN CASE OF FAULTS OR ACCIDENTS DUE TO NEGLIGENCE, INCAPACITY,
EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description
EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300
MODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
red rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg
ITEMQTYPART NUMBER DRG 5- TCR C 3 DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) TE Air Top Eye TE and Trolley 7/7/3-65kg Title of project Material Weight REV. Designed by Checked by Approved by B. Aitken
Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
CLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
Di-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
D300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
Illustrated Pats List
Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should
15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max.
15. Spare part list Typing. Type no.: Ballart nr.: Fabrikationsnr.: Prod. no.: Prod. nr.: Årgang: Year: Jahr: Max. arb. tryk: Max. pressure: Max. Druck: Egenvægt: Own weight: Eigengewicht: Spænding: Voltage:
PARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
OPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
LISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
Corvus Racer CC
Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc
Parts Manual RZ4221 BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4221 BF / 9676101 Please
B50 PARTS TRAILER MOUNTED PUMP MODEL B50 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 REED TRAILER MOUNTED CONCRETE PUMP 05 MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision C1
multi frame Exploded views / Part lists
multi frame Exploded views / Part lists Rev. date (10.010) On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually
MAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
Parts Manual. Ultra 52 / Ultra 52 BF / Ultra 61 / Ultra 61BF /
Parts Manual Ultra 52 / 966690601 Ultra 52 BF / 966690602 Ultra 61 / 966611801 Ultra 61BF / 966611802 Please read the operator s manual carefully and make sure you understand the instructions before using
Parts Manual SPEEDZTR 42SE /
Parts Manual SPEEDZTR 42SE / 96667602 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is
Parts Manual RZ4623 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4623 / 967009801 Please
-en. Belt Drive Walk Behind Commercial Mower 32" 36" s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com
Belt Drive Walk Behind Commercial Mower 32" 36" 0 ~ z m ;c - en s:: )> z c )> r ~ ~ ~ en r -en -1 1 www. BradleyMowers.com ~ AHA~~ COMPANY! Bradley Mowers Belt Drive Parts 33 Frame Assembly 34 Frame Assembly
MANUAL REV. 03 (11/26/01)
Parts Manual MANUAL 539105906 REV. 03 (11/26/01) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185
Edge 540 V3 35CC. Scheme A. Item No:L G Specifications. Flying Weight
Edge 540 V3 35CC Item No:L G035016 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description 76 (1930mm) 74 (1879mm) 1200sq in(77.4sqdm) 9.9 12lbs(4.5 5.5kg) 91 1.20(2C)
MXS R 30CC. Item No:L G Specifications. 67 1/2"(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo.
MXS R 30CC Item No:L G030008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description Covering Material Carbon Fibre : 75"(1915mm) 67 1/2"(1720mm) 1023sq in(66sq
3550 PARTS MANUAL TABLE OF CONTENTS BREAKOUT WRENCH ASSEMBLY CARRIAGE ASSEMBLY CONSOLE ASSEMBLY LEFT CONSOLE ASSEMBLY RIGHT ENGINE HOUSING ASSEMBLY
3550 PARTS MANUAL 4/30/01 3550 PARTS MANUAL TABLE OF CONTENTS 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 BREAKOUT WRENCH ASSEMBLY CARRIAGE ASSEMBLY CONSOLE ASSEMBLY LEFT CONSOLE ASSEMBLY
PC-196 B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG. Publication 501-TAB 8
B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG Publication 501-TAB 8 Revision A November 1, 1991 APPROX. COMPLETE HANDBRAKE NET WT PART NO. TON WHEEL WHEEL ASSEMBLY LBS (CAR SET) CAR BASE DIA. PART
Parts Manual RZ4222TF BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4222TF BF / 96703601
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana
GENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
Printed from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1111 020 2116 1 Crankcase 2-7 2 9371 470 3120 2 Cylindrical pin 6x20 3 9022 341 1010 10
Baffle and Shredder Kits
Baffle and Shredder Kits For RC(M)5020 Rotary Cutters Before You Start! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives
MANUAL REV. 09 (04/20/06)
Parts Manual MANUAL 539105906 REV. 09 (04/20/06) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185
Parts Manual. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 SPDZTR 46 / 966657801 SPDZTR 42 CA / 966657901 SPDZTR 46 BF / 966658001 SPDZTR 48 / 966698601 SPDZTR 54 / 966658201 SPDZTR 54 / 966658301 SPDZTR
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
TRAILER MOUNTED PUMP MODEL B70 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 REED TRAILER MOUNTED CONCRETE PUMP 05 MODEL B50 ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW
Parts Manual. English
Parts Manual WHF4817 / 966947005 WHF3617 / 966947008 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2009 HTC. All rights reserved.
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Nomad. Page No Rev No
FUSELAGE STUB WING WING STRUT FITTING ASSEMBLY LOOSE ATTACHMENT BOLTS REPAIR 1. PLANNING INFORMATION A. Effectivity (1) Aircraft affected: (a) N22 Series line sequence numbers 1 to 9, 11 to 29, 31, 33,
/ WH4817ETS MANUAL NO REV. 02 (02/17/06)
Parts Manual Models: 968999123 / WH4817ETS MANUAL NO. 539106509 REV. 02 (02/17/06) Model Number: Serial Number: Date of Purchase: Dealer Information: Notes: 2 Table of Contents POWER UNIT ASSEMBLY... 4
STANDARD CANOPY WORK REPORT B-1
STANDARD CANOPY WORK REPORT B-1 No. Check Parts / Tools Qty _ Canopy Lock 1 [ ] 6E2-3 Canopy Hinge Block 1 2 [ ] 6E4-5 Canopy Side Frame 2 2 [ ] 6E2-1 Canopy Lock Assembly 1L + 1R 3 [ ] 6E2-4 Rear Lock
MODELS 920LS-922LS SERIES
THE MODELS 90LS-9LS SERIES HYDRAULIC LOG SPLITTER EXPLODED VIEWS WITH PART NUMBERS CONGRATULATIONS! You are now the proud owner of a BARRETO log splitter. The following pages have detailed views of your
12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0.
D-AHT REV REVISION HISTORY REV. DATE APPROVED Part Number DRG Title of Project Scale Not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of
Parts Manual RZ4824F /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4824F / 967003802 Please
LISTA DE REFACCION MODELO LS1018L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
Parts List. Knight 600E. Version 1.5/2008
Parts List Knight 600E Version 1.5/2008 How to order your parts! 1. Check part number on the drawing 2. Use the part number to find the ORDER number on the list 3. Only use ORDER number for your parts
PowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
Chapter 20. Standard Practices - Airframe
Chapter 20 Standard Practices - Airframe PAGE 1 Chapter 20 Table of Contents Chapter Title 20-00-00 GENERAL.................................. 3 20-10-00 STANDARD PRACTICES AIRFRAME........... 4 20-10-01
Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF /
Parts Manual SPEEDZTR 42 / 6603801 SPEEDZTR 42BF / 66054201 SPEEDZTR 46BF / 658831 SPEEDZTR 48BF / 65883501 SPEEDZTR 54BF / 65883201 Please read the operator s manual carefully and make sure you understand
EXPLODED PARTS LIST VSS 60
Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506
DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #
DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision D
TRAILER MOUNTED PUMP MODEL A30 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 REED TRAILER MOUNTED CONCRETE PUMP 03 MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE MANUAL
LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage.
LANDING GEAR 1. Fit landing gear into slots on bottom of fuselage. 4. Use channel-lock pliers to press blind nuts into position (note: drilled hole should be slightly smaller than shaft of blind nut for
.JET. HP-5A/15A/35A Hydraulic Press Parts List EQUIPMENT& TOOLS. JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company.
.JET EQUIPMENT& TOOLS HP-5A/15A/35A Hydraulic Press Parts List (HP-15A shown) JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company P.O. BOX 1349 Auburn, WA 98071-1349 253-351-6000 Fax 253-939-8001
Illustrated Parts Manual
Illustrated Parts Manual Mustang Series RZT TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (December, 0) To The Owner Thank You Thank you for purchasing an MTD Zero-Turn Tractor.
Parts Manual for: MODELS / I.D. : 968999150 / ZTH4217A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort to keep pace with changes in technology,
It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating loose.
Installation instructions for FC12 Forward Controls for Kawasaki Vulcan 750 It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
TRAILER MOUNTED PUMP MODEL A30HP ILLUSTRATED PART MANUAL TABLE OF CONTENTS HOW TO USE PARTS MANUAL HOW TO ORDER PARTS TABLE OF CONTENTS
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 REED TRAILER MOUNTED CONCRETE PUMP MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE MANUAL FIGURE
Power Train Lift Max. Capacity: 1,250 lbs.
655 EISENHOWER DRIVE OWATONNA, MN 55060 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX:
Version: 1.0 Revised: 6/8/2011. CBU Assembly Instructions Manual
CBU Assembly Instructions Manual Contents 1 General... 3 2 Package... 4 2.1 Packing order... 4 2.2 Unpacking... 5 3 Assembly of the body... 6 3.1 General... 6 3.2 Mounting base drilling chart... 8 3.3
STRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0
105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0 Step 1. Installation of the aileron servos 1) Mount aileron servo to servo mounting blocks with servo s screws. Install servo mounting plate with screws.