Parts Manual RZ4623 /

Size: px

Start display at page:

Download "Parts Manual RZ4623 /"

Howard Park
5 years ago
Views:

1 Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4623 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

2 When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Parts Manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number The machine s manufacturing number can be found on the printed plate affixed to the engine compartment. Stated on the plate, from the top are: The machine s type designation (I.D.). The manufacturer s type number (Model). The machine s serial number (Serial no.) Please have the type designation and serial number available when ordering spare parts. The engine s manufacturing number is stamped on one of the valve covers. The plate states: The engine s model. The engine s type. Code Please have these available when ordering spare parts. The wheel motors and hydrostatic pumps have a barcode decal affixed at the rear All rights reserved. Orangeburg, SC Printed in U.S.A.

3 CONTENTS FRAME... 4 ENGINE PLATE... 6 STEERING... 8 IGNITION BRAKE / LIFT HYDRAULIC PUMP / MOTOR WHEELS AND TIRES MOWER DECK / CUTTING DECK SEAT DECALS NOTE: ALL FASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED.

4 FRAME

5 FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PLATE, OUTER BRAKE BLK PLATE, BRAKE LATCH BLK PLATE, LIFT OUTER BLK PLATE, LIFT INNER BLK PLATE, FOOT w/decals FOOT REST ORG MOUNT, STRUT RT BLK MOUNT, STRUT LT BLK SUPPORT, FENDER BLK FRAME, FRONT RT ORG FRAME, FRONT LT ORG HAIRPIN KNOB w/ STUD SWIVEL LINK, FRONT SUSPENSION SPACER ½ OD x 1½ GROMMET, BUMPER LIFT PIN HCS 3 /8-16 x HCS 5 /16-18 x 2¾ HCS 5 /16-18 x HCS 5 /16-18 x 2¼ HCS ¼-20 x RHSNB 3 /8-16 x BOLT 3 /8-16 x 2 5 /8 THD FRM WASHER ½ FLT WASHER 5 /16 SAE FLT WASHER ¼ FLT WASHER 3 /8 STD FLT NUT 3 /8-16 HEX JAM NYLOC NUT 5 /16-18 HEX FLG NYLOC NUT 3 /8-16 HEX FLG NYLOC NUT 7 /16-14 HEX NYLOC NUT ¼-20 HEX NYLOC 5

6 ENGINE PLATE

7 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PLATE, ENGINE BLK ARM, IDLER SPINDLE, IDLER PULLEY, IDLER CLUTCH, 105 FT/LBS GUARD, MUFFLER BLK PULLEY, ENGINE SPACER STOP, CLUTCH BLK HOSE, DRAIN PLUG, OIL CLAMP SPRING, DECK DRIVE EXHAUST TUBE, RT EXHAUST TUBE, LT MUFFLER ASM TWIN RHSNB 5 /16-18 x RHSNB 5 /16-18 x ¾ HCS 7 /16-20 x 3½ HCS ½-13 x 3¼ HCS 3 /8-16 x 3½ TPBLT HHFS 3 /8-16 x 1 THD FRM SCREW ¼-20 x 5 /8 THD FRM SCREW 5 /16-18 x 1 SCKT HD BOLT 5 /16-18 x ¾ THD FRM NUT ½-13 HEX NYLOC NUT 3 /8-16 HEX NYLOC NUT 5 /16-18 HEX FLG NYLOC WASHER, HEAVY WASHER ½ FLT WASHER 5 /16 STD FLT WASHER, CLUTCH BRACKET, MUFFLER BLK 7

8 STEERING

9 STEERING ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION LEVER w/ GRIP GRIP, FOAM BRACKET, CONTROL BEARING, FLANGE LEVER, CONTROL LEVER, HANDLE SPACER, PIVOT CONTROL DAMPENER BLOCK, TRACKING SPRING SPRING KNOB HCS ½-13 x 2¾ HCS 5 /16-18 x HCS 5 /16-18 x 1½ HCS 5 /16-18 x 1¼ SCREW 5 /16-18 X 1 BTN HD SCREW 5 /16-18 X 1¾ BTN HD HHFS 5 /16-18 X ¾ NUT ½-13 HEX JAM NYL GR NUT 5 /16-18 HEX FLG NYLOC NUT 5 /16-18 HEX NYLOC NUT 5 /16-18 HEX WHIZLK WASHER 5 /16 SAE FLT 9

10 IGNITION

11 IGNITION ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FENDER, RT GRY FENDER, LT GRY TANK, FUEL CAP, FUEL w/ TETHER CABLE, THROTTLE KEY, IGNITION SWITCH, IGNITION SWITCH, CLUTCH SWITCH, BRAKE SWITCH, NC PANEL, CONTROL BATTERY TIE DOWN, BATTERY BOX, BATTERY BLK TERMINAL COVER INSULATOR VALVE, FUEL CHECK VALVE, FUEL SOLENOID CLAMP, HOSE CLAMP, HOSE GROMMET, RUBBER GROMMET, CHECK VALVE ELBOW LENS, LT RIM, LT LENS, RT RIM, RT HOUR METER FUEL LINE 10" FUEL LINE 2½" FUEL LINE " SHIELD, HEAT CONTROL, CHOKE FUEL LINE ASSY PLATE, TAPPED KNOB SCREW x ½ HEX HD SCREW x ¾ SKT HD SCREW ¼-20 x 5 /8 BTN SKT SCREW x ¾ WSH HD SCREW x 5 /8 WSH HD RHSNB 3 /8-16 x RHSNB 5 /16-18 x ¾ BOLT ¼-20 x ½ NUT ¼-20 HEX NYLOC NUT HEX NYLOC NUT 5 /16-18 HEX FLG NYLOC WASHER ¼ ITLW NOT SHOWN POSITIVE CABLE, LONG BATTERY CABLE NEGATIVE HARNESS, WIRING TIE, WIRE 11

12 BRAKE / LIFT

13 BRAKE / LIFT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION ARM, LIFTING SHAFT, BRAKE BLK SPRING, COMPRESSION SPRING GRIP, HANDLE BLK ROD, HANDLE RELEASE ROD, LATCH RELEASE ARM, SUSPENSION RR LINK, REAR SUSPENSION BUTTON, PUSH BLK BRACKET, LIFT STUD w/ ANTI-ROTATE E-RING HAIRPIN BOLT 3 /8-16 x 3 /8 SKT HD NUT, LIFT LINK NUT ¼-20 HEX NYLOC NUT, PLASTIC NUT 5 /16-18 HEX FLG NYLOC WASHER 5 /8 SAE FLT WASHER ¼ FLT 13

14 HYDRAULIC PUMP / MOTOR

15 HYDRAULIC PUMP / MOTOR ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION EZT, LT EZT, RT ROD, EZT BRAKE LT ROD, EZT BRAKE RT BELT, EZT ROD, MOTION CONTROL ROD END RT ROD END MALE LT COUPLER, ROD END SPRING, BRAKE ROD HAIRPIN, COTTER COG, BRAKE DISC BRAKE ARM KIT HUB KIT LINK ARM, BYPASS BLADE, FAN SPACER TUBE SUPPORT, EZT FRT MOUNT, EZT RR BLK HCS 3 /8-16 x 2½ HCS 5 /16-18 x 2¾ HCS 5 /16-18 x HCS 5 /16-18 x ¾ HCS 5 /16-18 x 2¼ SCREW x ¾ SLTD RD NUT 5 /16-18 HEX NYLOC NUT 5 /16-18 NYLOC INSERT NUT 5 /16-24 HEX NUT 5 /16-24 HEX JAM LH NUT HEX NYLOC NUT ¼-20 HEX NYLOC WASHER ¼ SAE FLT WASHER 5 /16 SAE FLT WASHER 3 /8 SPLT LCK WASHER 3 /8 SAE FLT

16 WHEELS AND TIRES

17 WHEELS AND TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION CASTER TIRE ASSY WHEEL ASSY, REAR 18 x CASTER TIRE, PLY RIM, CASTER RIM 8 x 7 w/.8" OFFSET ZERK 3 /16 DRIVE ZERK YOKE ORG SPRING, CASTER BUSHING, CASTER BEARING, FLANGED BEARING, FLANGED GREASE CAP PLUG, CASTER VALVE STEM SPACER SPACER 5 / BOLT, HEX 5 /16-18 x 1 NYLOC RHSNB ½-13 x 6½ NUT ½ LUG NUT ½-13 HEX CNTRLK WASHER ½ FLT WASHER

18 MOWER DECK / CUTTING DECK Torque to ft/lbs

19 MOWER DECK / CUTTING DECK ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECK BELT, DECK BLADE, HI-LIFT SHIELD, BELT RH SHIELD, BELT LH STRIPPER,UNIVERSAL WHEEL, GAUGE KEEPER, BELT PULLEY, IDLER PULLEY, IDLER PULLEY, DECK SPRING, DECK BELT SPRING, TORSION ARM, IDLER COUPLING, CONNECT PORT, WASHOUT BAFFLE, FRONT BAFFLE, FRONT RH BRACKET, DEFLECTOR SHIELD, DEFLECTOR CUTTER HOUSING BUSHING, IDLER BEARING CAP, SLEEVE ROD, HINGE STUD w/ ANTI-ROTATE EYE BOLT 5 /16 x 3½ HCS 7 /16-14 x 2½ HCS 5 /16-18 x 1¼ BOLT ½ x 2 5 /8 SHOULDER BOLT 3 /8-16 x 3 /8 SHOULDER BOLT, WASHER BOLT 3 /8-16 x 2¼ CARRIAGE RHSNB 5 /16-18 x ¾ SCREW x 5 /8 WSHR HD SCREW 5 /16-18 x WSHER HD SCREW ¼-20 x 5 /8 THDROLL PUSHNUT NUT 5 /16-18 HEX FLG NYLOC NUT 5 /16-18 HEX NYLOC NUT 3 /8-16 HEX NYLOC NUT 3 /8-16 HEX JAM NYLOC NUT 9 /16 TOP CNTRLK NUT 7 /16-14 HEX NYLOC NUT 5 /16-18 HEX WHIZLK WASHER 7 /16 FLT WASHER 3 / WASHER, SPACER 19

20 SEAT

21 SEAT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SEAT SEAT PAN SUPPORT, SEAT ORG SUPPORT, SEAT RR BLK SPRING, SEAT SPRING, LATCH SEAT SWITCH, SEAT HANDLE, SLIDE, SEAT GROMMET, BUMPER RETAINER, U TYPE RHSNB 5 /16-18 x 2½ RHSNB 5 /16-18 x ¾ HCS 3 /8-16 x 5 / HCS 3 /8-16 x 1¼ BOLT 5 /16 SHOULDER BOLT 5 /16-18 x ¾ THD FRM NUT 5 /16-18 HEX FLG NYLOC WASHER 3 /8 STD FLT WASHER 3 /8 SPECIAL 21

22 DECALS

23 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, EXHAUST DECAL, BATTERY WARNING DECAL, RESPONSIBILITIES DECAL, MOTION CONTROL DECAL, CONTROLS DECAL, TRACKING DECAL, HEIGHT DECAL, START DECAL, SAFETY DECAL, CROWN DECAL, RZ ABRASIVE PAD DECAL, SAFETY WARNING DECAL, HUSQVARNA DECAL, PARK BRAKE DECAL, EXIT DECAL, DO NOT TOW DECAL, SERVICE DECAL, SEVERING DECAL, BLADES DECAL, DISCHARGE DECAL, BELT ROUTING 23

24 Rev B

Parts Manual SPDZTR 42 / SPDZTR 42 BF /

Parts Manual SPDZTR 42 / SPDZTR 42 BF / Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to