OSG. Tap & Die, Inc. VOL.1
|
|
- Gloria Russell
- 5 years ago
- Views:
Transcription
1 OSG &, Inc. VOL.1
2 EXOTAP VC-10 TI List 313TI For s, Modified Bottom (2.5P-3P) Spiral Fluted s Per 2 56 H H H H H H H H H H H /4 20 H /4 20 H /4 28 H /4 28 H /16 18 H /16 18 H /16 24 H /16 24 H /8 16 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 and up = 1 pc. Available V coating only. s Per 3/8 16 H /8 24 H /8 24 H /16 14 H /16 14 H /16 20 H /16 20 H /2 13 H /2 13 H /2 20 H /2 20 H /16 18 H /16 18 H /8 11 H /8 18 H /8 18 H /4 10 H /4 16 H /4 16 H H Spiral Fluted List 345TI For s, Modified Bottom (2.5P-3P) M3 0.5 D M4 0.7 D M5 0.8 D M6 1 D Packed: Up to M10 = 10 pcs; M12 = 5 pcs. Available V coating only. M D M D M D M D TI 345TI s s Stainless s Hardened s 2
3 EXOTAP VC-10 NI List 313NI For Nickel Based s, Modified Bottom (2.5P-3P), Bottom (1.5P-2P) Spiral Fluted s Per UNC UNF Mod. Bottom Bottom List Price 4 40 H H H H H H H H H H H H H /4 20 H /4 20 H /4 28 H /4 28 H /4 28 H /16 18 H /16 18 H /16 24 H /16 24 H /16 24 H /8 16 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 and up = 1 pc. Available Steam Oxide finish only. s Per List Price Mod. Bottom Bottom 3/8 16 H /8 24 H /8 24 H /8 24 H /16 14 H /16 14 H /16 20 H /16 20 H /16 20 H /2 13 H /2 13 H /2 20 H /2 20 H /2 20 H /16 18 H /16 18 H /8 11 H /8 18 H /8 18 H /4 10 H /4 16 H /4 16 H H List 345NI For Nickel Based s, Modified Bottom (2.5P-3P) List Price M3 0.5 D M4 0.7 D M5 0.8 D M6 1 D Packed: Up to M10 = 10 pcs; M12 = 5 pcs Available Steam Oxide finish only. List Price M D M D M D M D NI 345NI s s Stainless s Hardened s 3
4 EXOTAP VC-10 List 313 Modified Bottom (2.5P-3P), Bottom (1.5P-2P) s Per Mod. Bottom Bottom S/O V 2 56 H H H H H H H H H H H H H H H H H H H H H /4 20 H /4 20 H /4 28 H /4 28 H /4 28 H /4 28 H /16 18 H /16 18 H /16 24 H /16 24 H /16 24 H /16 24 H /8 16 H /8 16 H /8 24 H /8 24 H /8 24 H /8 24 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 and up = 1 pc. Specify coating at time of order: 01 = Steam Oxide; 08 = V Spiral Fluted 313 s s Stainless s Hardened s 4
5 EXOTAP VC-10 List 313 (continued) Modified Bottom (2.5P-3P), Bottom (1.5P-2P) s Per Mod. Bottom Bottom S/O V 7/16 14 H /16 14 H /16 20 H /16 20 H /2 13 H /2 13 H /2 20 H /2 20 H /8 11 H /8 18 H /8 18 H /4 10 H /4 16 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 and up = 1 pc. Specify treatment at time of order: 01 = Steam Oxide; 08 = V. List 345 Modified Bottom (2.5P-3P) S/O M3 0.5 D M4 0.7 D M5 0.8 D M6 1.0 D Packed: Up to M10 = 10pcs; M12 = 5 pcs. Specify treatment at time of order: 01 = Steam Oxide; 08 = V. V S/O V M D M D M D M D s s Stainless s Hardened s 5
6 EXOTAP VC-10 TI List 312TI For s, Plug (4P-4.5P) s Per 2 56 H H H H H H H H H H H /4 20 H /4 20 H /4 28 H /4 28 H /16 18 H /16 18 H /16 24 H /16 24 H /8 16 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 and up = 1pc. Available V coating only. s Per 3/8 16 H /8 24 H /8 24 H /16 14 H /16 14 H /16 20 H /16 20 H /2 13 H /2 13 H /2 20 H /2 20 H /16 18 H /16 18 H /8 11 H /8 18 H /8 18 H /4 10 H /4 16 H /4 16 H H List 344TI For s, Plug (4P-4.5P) M3 0.5 D M4 0.7 D M5 0.8 D M6 1 D Packed: Up to M10 = 10 pcs; M12 = 5 pcs Available V coating only. M D M D M D M D TI 344TI s s Stainless s Hardened s 6
7 EXOTAP VC-10 NI List 312NI For Nickel Based s, Plug (4P-4.5P) s Per 4 40 H H H H H H H H H H /4 20 H /4 20 H /4 28 H /4 28 H /16 18 H /16 18 H /16 24 H /16 24 H /8 16 H /8 16 H Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5pcs; 3/4 and up = 1 pc. Available Steam Oxide finish only. s Per 3/8 24 H /8 24 H /16 14 H /16 14 H /16 20 H /16 20 H /2 13 H /2 13 H /2 20 H /2 20 H /16 18 H /16 18 H /8 11 H /8 18 H /8 18 H /4 10 H /4 16 H /4 16 H H Spiral Pointed List 344NI For Nickel Based s, Plug (4P-4.5P) M3 0.5 D M4 0.7 D M5 0.8 D M6 1 D Packed: Up to M10 = 10 pcs; M12 = 5pcs. Available Steam Oxide finish only. M D M D M D M D NI 344NI s s Stainless s Hardened s 7
8 EXOTAP VC-10 List 312 Plug (4P-4.5P) s Per H2 H3 H4 H5 H6 S/O V / / / / / / / / / / / / / / Packed: Up to 3/8 = 10 pcs; 7/16 to 5/8 = 5 pcs; 3/4 = 1 pc. Specify treatment at time of order: 01 = Steam Oxide; 08 = V. List 344 Plug (4P-4.5P) EDP Number S/O M3 0.5 D M4 0.7 D M5 0.8 D M6 1.0 D Packed: Up to M10 = 10 pcs; M12 = 5 pcs. Specify treatment at time of order: 01 = Steam Oxide; 08 = V. V EDP Number S/O V M D M D M D M D s s Stainless s Hardened s 8
9 Use safety cover, safety glasses and safety shoes during operation. Do not touch cutting edges or chips with bare hands. Stop cutting when the tool becomes dull. Stop cutting operation immediately if you hear any strange sounds. Use correct tools for the operation. Check dimensions to ensure proper selection. Do not modify tools. OSG TAP & DIE, INC. 676 E. Fullerton Avenue Glendale Heights IL FAX: Copyright 2010 OSG &, Inc. All rights reserved. PDF Only.
Diamond-coated Router
Diamond-coated Router Designed primarily for trimming of CFRP, we offer a variety of router styles to accommodate our customers needs including a multi-flute type with nicks for high efficiency, Herringbone
More informationINTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS TAP SELECTION GUIDE HAND TAPS 3 SPIRAL POINT TAPS Plug Style 4 SPIRAL FLUTE TAPS Bottoming Style 5 SPIRAL POINT TAPS Plug Style 6-7 SPIRAL
More informationSTI-SCREW THREAD INSERT TAP OPTIONS
-SCREW THREAD INSERT TAP OPTIONS EXPANDED OFFERING SCREW THREAD INSERT TECHNOLOGY PREVENT STRIPPING on Safety Critical Threading Applications with. Screw Thread Insert Tapping Options EMUGE (Screw Thread
More information45PC. TAP AND DIE SET
Model # 7560 7561 45PC. TAP AND DIE SET OPERATOR S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE Wear eye protection Use proper lubrication WARNING: FOR HAND CUTTING APPLICATIONS ONLY.
More informationEmuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps!
TM Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps! Emuge Chip-Breaking Technology TM Emuge s new Rekord DZBF Series Taps featuring
More informationThe Catalogue of Nomura Tool Works Co., Ltd. Tool manufacturing since 1954 Bent Shank Taps Nib Taps Nut Taps
The Catalogue of Nomura Tool Works Co., Ltd. Tool manufacturing since 1954 Bent Shank Taps Nib Taps Nut Taps Introduction In today's highly developed machine industry, a tap is a cutting tool that requires
More informationY A M A W A. We thank you for your continued support.
Y A M A W A Mr. Jokichi Watanabe, founder of Yamawa Manufacturing, located his company in Shibuya-Ku, Tokyo during 1923. Since then, Yamawa continues a strong effort to evolve it's manufacturing technology
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationComposite Tool Selection Guide
Composite Tool Selection Guide Routers Pictured (Left to Right): BNC, HBC, REC, MFR & CFR Tool AERO-BNC AERO-HBC Slotting Machining Style Machining Machine Type Side Efficiency Milling Roughing Finishing
More informationYAMAWA High Performance Taps for Aerospace Industry
YAMAWA High Performance Taps for Aerospace Industry The demand for tapping into heat resistant alloys and stainless steels is increasing rapidly in the Aerospace Industry. The most common heat resistant
More informationUnderstanding the basics of Spiral Pointed Taps. July 2017
Understanding the basics the of Spiral Basics Pointed Taps of Spiral Pointed Taps July 2017 Understanding the Basics of Spiral Pointed Taps What is a spiral pointed taps? Cutting torque of spiral pointed
More informationVC-MEMV-S1. Extract from the online catalog. Order No.:
Extract from the online catalog VC-MEMV-S1 Order No.: 1884649 The illustration shows versions, powder-coated and EMC-coated box mounting base Box mounting base, made of metal, EMC-coated type 1, number
More informationSYMBOL INDEX HSS V3. Special heat treatment. HSS-Co 8% CARBIDE. Powder Steel High performance ASP 23 BI/CV. GOLD Gold finish HARD LUBE
526 Technical Information GENERAL ICONS DIN DIN Norm TOL Tolerance Standard quality Professional quality Extra porfessional quality Supreme quality MATERIALS High speed steel M2 quality G High speed steel
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA THREAD MILLING
BULLDOG CUTTING TOOLS THREAD MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools
More informationMELIN TOOL COUNTERSINKS
MELIN TOOL COUNTERSINKS TABLE OF CONTENTS GENERAL PURPOSE Zero Flute, Single Edge - HSS Zero Flute, Single Edge - Cobalt HSS Single Flute - HSS Single Flute - Cobalt HSS (M42) Single Flute, TiN Coated
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationDescription 1/8" 1/4" & 3/8" 1/2" & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" lb
Precision Die Heads For SUPERTRONIC 1250, 2000 and SUPER CUT models. Feature enlarged shaving discharge chambers for faster threading, strengthened locking plate and precise die seating. Precision Threading
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationVC-MEMV-K3. Extract from the online catalog. Order No.:
Extract from the online catalog VC-MEMV-K3 Order No.: 1884500 The illustration shows versions, powder-coated and EMC-coated coupling housing Coupling housing, made of metal, EMC-coated type 3, number of
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
More informationA BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
More informationFeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS
FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm
More informationTAP & DIE PRICE LIST INDEX
TAP & DIE PRICE LIST INDEX ANPT Die Page 4 BA Die Page 4 BA Tap Page 17 BSF Tap Page 19 BSB Die Page 4 BSB Tap Page 17 BSCY Tap Page 17 BSF Die Page 3 BSP Die Page 4 BSP Tap Page 18 BSPT Die Page 4 BSPT
More information-treme thread cutting. Tiny Tools. New Products. Metric
TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationRouter Section 2018 Master Catalog
Router Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and
More informationVC-MP-K1. Extract from the online catalog. Order No.:
Extract from the online catalog VC-MP-K1 Order No.: 1884568 The illustration shows versions, powder-coated and EMC-coated coupling housing Coupling housing, made of metal, powder-coated type 1, number
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationMetal Drilling.
101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationTube Facer For 3/8 1-1/2 Tube OD - ETF Style
Tube Facer For 3/8 1-1/2 Tube OD - ETF Style Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com SAFETY 1. Remove the
More informationImproved Efficiency for Slot Milling with Deep Depths of Cut
TOOLS NEWS B230G Corner Radius End Mill for High Efficiency Titanium Alloy Machining New Product Improved Efficiency for Slot Milling with Deep Depths of Cut Corner Radius End Mill for High Efficiency
More informationMetals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More information4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationCUTTING TOOLS SECTION Q DEALER PRODUCTS, INC TH ST. GRAND PRAIRIE, TX
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Section Q INDEX DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Q SECTION INDEX
More informationBuyer s Handbook 2015
Valid from May 15, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. SERVING WESTERN CANADA FOR OVER 50 YEARS 100% CANADIAN OWNED A.C.T. Equipment Sales Ltd. Terms & Conditions
More informationHANDLES & KNOBS HANDLES HANDLES & KNOBS COMPACT CAM HANDLES QLCCS ADJUSTABLE-TORQUE HANDLES CAM HANDLES CAM HANDLES. Part No. QLCCS. Part No.
& & ADJUSTABLE-TORQUE Part No. ATCL COMPACT CAM QLCCS Part No. QLCCS CAM CAM Part No. QLCA Part No. QLCL & ONE-TOUCH LOCKING Part No. OTLK POINTER PLATE Part No. OTLK-A TORQUE LIMITING Part No. CTK & ATCL
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationto Hand-Held Drilling When you need a high performance drill for your most demanding applications,
to Hand-Held Drilling When you need a high performance drill for your most demanding applications, Foster & Company has the solution. Our high performance PowerBit drills, unique design and black and bronze
More informationInventory (Figure 2)
MODEL T10130/T10126 6" & 8" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10126/T10130 indexable insert spiral cutterheads are designed to replace straightknife cutterheads from the Grizzly jointer Models
More informationTUBE AND SHEET DRILLS
TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder
More informationIndexable ball end mill for finishing. ABPFN type. Ball Precision F ABPFN type. New Product News No.1606E
Indexable ball end mill for finishing ABPFN type Ball Precision F ABPFN type New Product News No.1606E-1 2017-6 High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful
More informationOversized Cabinet. Model no. MC4570. Single Cabinet. 24" cabinet with surface mount kit
02/01/10 table of contents Features Oversized Cabinet Model no. MC4570 Mirror Cabinet Features 2 24" x 30" x 4" soft close hinge soft rubber bumper Oversized Mirror Cabinets 3 larger size finger grip slot
More informationFliteLine Post & Wire Bird Deterrent Includes specifications for: FliteLine system components
Three-Part Specifications - Copyright 2014 - Nixalite of America Inc FliteLine Post & Wire Bird Deterrent Includes specifications for: FliteLine system components Nixalite of America Inc offers the FliteLine
More informationUnderstanding the Basics of Spiral Fluted Taps. July 2017
Understanding the Basics of Spiral Fluted Taps July 2017 Understanding the Basics of Spiral Fluted Taps What is a spiral fluted tap? Materials most suitable for spiral fluted taps and their chip configuration.
More informationDIN 934 (1987) NEN 1560 NF E25-401
Hexagon nut DIN 94 (1987) NEN 1560 NF E25-401 Technical data d P m s M1 0,25 0,8 2,5 M1,2 0,25 1 M1,4 0, 1,2 M1,6 0,5 1,,2 M1,7 ( DIN) 0,5 1,4,5 M2 0,4 1,6 4 M2, ( DIN) 0,4 1,8 4,5 M2,5 0,45 2 5 M2,6 (
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationTUFTHRED - FRACTIONAL & METRIC SIZES
3 East Julie Street 800-3-119 (Voice) 90-733-741 (Fax) TUFTHRED - FRACTIONAL & METRIC SIZES No tapping is required; just drill out the damaged threads using fractional or wire gauge drill bits. Then screw
More informationPrecision Micro-Aperture Catalog
National Aperture, Inc. Precision Micro-Aperture Catalog Version 2012 PLEASE CONTACT: Data Optics, Inc. Distributor for National Aperture, Inc. Phone: (734) 483-8228 (800) 321-9026 Fax: (734) 483-9879
More informationGeneric Multilayer Specifications for Rigid PCB s
Generic Multilayer Specifications for Rigid PCB s 1.1 GENERAL 1.1.1 This specification has been developed for the fabrication of rigid SMT and Mixed Technology Multilayer Printed Circuit Boards (PCB's)
More informationJobber Length Hi-Helix 118º point. Screw Machine Length NAS 907C
Table of Contents Twist Drills Jobber Length NAS 907B Heavy Duty 135º Split point Type 240-UB Heavy Duty Ultra Bor.. 6-7 Type 643-UB................... 8-9 *Type 278-UB 3/8" Shank......... 7 Type 240-A
More informationCLEARANCE SALE. KORLOY & Miscellaneous Inserts Carbide & Cermet Inventory Clearance
963 Martin Grove Road, Rexdale, Ontario M9W 4V6 Phone: 416-244-5361 or 1-800-268-1484 Fax: 416-241-2396 E-mail: tools@machinerycanada.com Web: www.machinerycanada.com CUTTING TOOLS CLEARANCE SALE All Sales
More informationSERIES BXB Bottom Chamfer Thredfloers
SERIES BXB Bottom Chamfer s Size H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 0-80 10002 10003 10004 10005 10006 10007 1-64 10122 10123 10124 10125 10126 10127 1-72 10242 10243 10244 10245 10246 10247 2-56
More informationONE SOURCE. Vol 4 FOR ALL YOUR FASTENER TOOLING NEEDS
ONE SOURCE Vol 4 FOR ALL YOUR FASTENER TOOLING NEEDS FASTENER PRODUCTS PLANETARY DIES OSG Planetary Dies are produced in many different sizes for all machine makes and models. They are precision ground
More informationInventory (Figure 2)
MODEL T24631 8" SPIRAL CUTTERHEAD Installation INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T24631 spiral
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27698 6" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The Model T27698 indexable insert
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationSOLUTIONS FOR INDUSTRIES VOL.2. Aerospace Industry. High performance cutting tool solutions. Industry
SOLUTIONS FOR INDUSTRIES VOL.2 Aerospace Industry High performance cutting tool solutions for the AEROSPACE Industry INDEX Tool Communication First Choice Good PRODUCT DESCRIPTION TOOL TYPE PAGE SUPER
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationMODEL T " SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27449 8" SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS The Model T27449 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead on the Grizzly jointer Model G0490W/G0490XW
More informationIntroduction. About Yamawa. About this Quick Guide
Quick Guide Introduction About Yamawa Founded in Japan in 1923, Yamawa has made the excellence in taps, dies and centering tools manufacturing as its core mission. Since its foundation, the organization
More informationThe Point of Sale Cutting Tool Solution for Professionals
The Point of Sale Cutting Tool Solution for Professionals Professional Grade Cutting Tool for Professional Trades Champion s ipac system provides you with professional grade cutting tools in individual
More informationUN THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. OAL 60º THREAD MILLS
UN SINGLE PROFILE (SPTM) - SOLID CARBIDE UN Q A B 60º C S Fine and coarse threads ranging from #00 to 1¼ + can be milled using the 19 varieties of these single profile thread mills. SPECIALTY PORT - CAVITY
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationHeckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION SECTION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL SECTION 04085 1.1 SECTION INCLUDES NOTE: Delete items below not required for project.
More informationSeverance Offers Four Types of Hand Files To Solve Virtually Every Application
are Great for Many Application Filing Deburring Shaping Forming Chamfering Sharpening Smoothing Beveling De-Flashing Trimming and De-Scaling Severance Offers Four Types of To Solve Virtually Every Application
More informationPRODUCT LINE CATALOG THU DERTAP. Chisholm, MN USA. A Division of Minnesota Twist Drill.
PRODUCT LINE CATALOG A Division of Minnesota Twist Drill Chisholm, MN USA THU DERTAP Style Page # Style Page # Style Page # Style Page # 2 Style Page # Style Page # Style Page # Style Page # T13CX T1813
More informationPANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationStarrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products
JW DONCHIN CO. Starrett Year End Sale! Electronic Caliper 799A Series No. 799A 6/150 List Price $125.00 SALE PRICE $100.00 Best Buys on Starrett Products Electronic Caliper - No. 799A Series Electronic
More informationCutting Tools DRILLS TO 16 TAPS & DIES TO 10 SAW BLADES & CUTTERS TO 10 FILES TO 4 MISC CUTTING TOOLS TO 8
CUTTING TOOLS Cutting Tools SECTION PAGE NO. DRILLS -1-1 TO 1 TAPS & DIES -2-1 TO 10 SAW BLADES & CUTTERS -3-1 TO 10 FILES -4-1 TO 4 MISC CUTTING TOOLS -5-1 TO 8 TABLE OF CONTENTS 1 DRILLS DRILL DECIMAL
More informationPlanning for successful machining of titanium starts
Photo courtesy Okuma America Machining Titanium Typical aerospace turbine blade that is machined on an Okuma machining center shown minus the high volume of coolant required to machine titanium. Optimize
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationALWAYS WEAR SAFETY GLASSES
MACHINE SHOP SAFETY ALWAYS WEAR SAFETY GLASSES Even when you are not working on a machine, you must wear safety glasses. A chip from a machine someone else is working on could fly into your eye. MACHINING
More informationJCutting Tools aerospace
JCutting Tools aerospace AppLIcations A286 Fasteners The new and improved Jarhook is the best available tap for A286 fasteners. During extensive testing the Jarhook surpassed all of the competition in
More informationCopy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
More informationMODEL H " BYRD SHELIX CUTTERHEAD INSTRUCTIONS
MODEL H9291 12" BYRD SHELIX CUTTERHEAD INSTRUCTIONS The Model H9291 12" Byrd Shelix cutterhead is designed to replace the straight-knife cutterhead on the Grizzly jointer Model G0609. The total procedure
More informationSOLUTIONS FOR INDUSTRIES. Aerospace Industry. High performance cutting tool solutions. Industry
SOLUTIONS FOR INDUSTRIES Aerospace Industry High performance cutting tool solutions for the AEROSPACE Industry INDEX Tool Communication First Choice Good PRODUCT DESCRIPTION TOOL TYPE PAGE SUPER ALLOY
More informationStable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationcustom architectural products and services for the glazing industry
custom architectural products and services for the glazing industry simply beautiful Engineers and manufacturers of custom architectural push-pull, display and entry hardware products. 708.339.4782 2 Welcome
More information