From the entire Brilliance LED Family, thank you for your loyalty and support.

Transcription

1 PRODUCT REFERENCE GUIDE 2017

2 is passionate about leading the landscape lighting industry into a fully energy efficient LED market with the highest quality products at the most cost effective prices. We strive to provide honest and exemplary customer service to our international network of distributors. At the forefront of all that we do is the mission of preserving our planet through sustainable goals. Here at Brilliance LED, we value respect, faith and humility. We seek to offer the finest craftsmanship, tooling, quality control, warranties, in-house engineering, contractor tech support and customer service. Whether you are in commercial or residential markets, we are your one stop manufacturer for highperformance landscape retrofit lamps. We are eager to reach and meet our customer s needs; whether you are a distributor, contractor, or homeowner we are here for you. Make use of all our resources and give us a call anytime we can help. From the entire Brilliance LED Family, thank you for your loyalty and support.

3 Brilliance LED lamps are patented under D73369, D73370, D73371, D73372, D Brilliance LED is a registered trademark. A Higher Light Form is a registered trademark of Brilliance LED Brilliance LED, LLC. All Rights Reserved. Product images are for illustration purposes only. Actual products may vary. All products, product specifications and data are subject to change without notice to improve reliability, function, design or otherwise. -Front cover photograph courtesy of McKay Landscape Lighting-

4 TABLE OF CONTENTS LOW VOLTAGE LINE VOLTAGE MICRO G-4 MICRO T- BEACON G-4 BEACON T- BEACON SCB BEACON DCB BEACON S8 G-4 ROUND WAFER G-4 RECTANGLE WAFER MR-8 MR-11 AR-11 MR-16 ECOSTAR MR-16 PREMIUM MR-16 EDGE PAR-36 S-14 12V CANDELABRA 12V STR LIGHT LIGHT BAR AQUABEAM BRILLIANCE DIMMER PAR-20 PAR-30 PAR-38 GU-10 EDGE PAR-16 EDGE G-9 EDGE A-19 EDGE FILAMENT S-14 EDGE FILAMENT S-21 EDGE FILAMENT CANDELABRA EDGE FILAMENT Photometrics Volt Amps UPC Index Warranty Contact

5 MICRO G-4 The Brilliance LED Micro G-4 Bipin is a subcompact LED that utilizes Samsung s chipset and also features Brilliance LED s multi-directional beam pattern. This Micro G-4 bipin is energy efficient and water resistant. Designed specifically for landscape retrofit, ideal for pathway lighting fixtures and step lights (12mm) 1.3 (32mm) New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI MICRO G4 XXXX RED GREEN BLUE AMBER KELVIN/COLOR Input Voltage Replaces Chipset , 3000, 700 Red, Green,Blue, Amber VAC 12VAC/DC 10W Halogen 8 6 Samsung 3,

6 MICRO T (12mm) 1.3 (32mm) The Brilliance LED Micro T- Wedge is a subcompact LED that utilizes Samsung s chipset and also features Brilliance LED s multi-directional beam pattern. This Micro T- Wedge is energy efficient and water resistant. Designed specifically for landscape retrofit, ideal for pathway lighting fixtures and step lights. New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI MICRO T Input Voltage Replaces Chipset VAC 12VAC/DC 10W Halogen 8 6 Samsung 3,

7 BEACON G-4 The Brilliance LED Beacon G-4 Bipin is a subcompact LED that utilizes the Epistar chipset and also features Brilliance LED s multi-directional beam pattern. This bipin is energy efficient and water resistant. Designed specifically for landscape retrofit application, ideal for pathway lighting fixtures and step lights (18.2mm) 1.4 (3.mm) New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI BEACON G4 XXXX KELVIN TEMPERATURE Beam Spread Replaces Chipset multi-directional, 3000, V AC 20W Halogen 84 6 Epistar 3,000 3

8 BEACON T (18.2mm) 1.4 (3.mm) The Brilliance LED Beacon T- Wedge is a subcompact LED that utilizes the Epistar chipset and also features Brilliance LED s multi-directional beam pattern. This T- is energy efficient and water resistant. Designed specifically for landscape retrofit application, ideal for pathway lighting fixtures and step lights. New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI BEACON T XXXX KELVIN TEMPERATURE Beam Spread Replaces Chipset multi-directional, 3000, V AC 20W Halogen 84 6 Epistar 3,000 4

9 BEACON SCB The Brilliance LED Beacon Single Contact Bayonet (SCB) is a subcompact LED that utilizes the Epistar chipset and also features Brilliance LED s multi-directional beam pattern. This SCB is energy efficient and water resistant. Designed specifically for landscape retrofit application, ideal for pathway lighting fixtures and step lights. New ceramic technology Dimmable with most magnetic transformers 0.72 (18.2mm) 1.2 (31.7mm) 2.04 (1.69mm) PART NUMBER: BRI BEACON SCB XXXX KELVIN TEMPERATURE Beam Spread Input Voltage Replaces Chipset multi-directional, 3000, V AC 20W Halogen 84 6 Epistar 3,000

10 BEACON DCB 0.72 (18.2mm) 1.2 (31.7mm) 2.04 (1.69mm) The Brilliance LED Beacon Double Contact Bayonet (DCB) is a subcompact LED that utilizes the Epistar chipset and also features Brilliance LED s multi-directional beam pattern. This DCB is energy efficient and water resistant. Designed specifically for landscape retrofit application, ideal for pathway lighting fixtures, wall washing, and hanging fixtures. New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI BEACON DCB XXXX KELVIN TEMPERATURE Beam Spread Replaces Chipset Omni-directional, 3000, VAC 20W Halogen 84 6 Epistar 0,000 6

11 BEACON S8 The Brilliance LED Beacon S8 is a subcompact LED that utilizes the Epistar chipset and also features Brilliance LED s multi-directional beam pattern. This S8 is energy efficient and water resistant. Designed specifically for landscape retrofit application, ideal for pathway lighting fixtures and step lights..97 (24.7mm) 1.4 (3.mm) New ceramic technology Dimmable with most magnetic transformers PART NUMBER: BRI BEACON S8 XXXX KELVIN TEMPERATURE Beam Spread Replaces Chipset multi-directional, 3000, V AC 20W Halogen 84 6 Epistar 3,000 7

12 G-4 ROUND WAFER 1.4 (36mm) The G4 Bipin Round Wafer is designed specifically for low voltage pucks. This compact LED is energy efficient and produces a broad 180 light pattern (33mm) Dimmable with most magnetic transformers PART NUMBER: BIN G4 RND WAFER Beam Spread Replaces Chipset V AC/DC 2W Halogen 8 60 Samsung 3,000 8

13 G-4 RECTANGLE WAFER The G4 Bipin Rectangle Wafer is designed specifically for low voltage landscape lighting fixtures. This compact LED is energy efficient and produces a broad 180 light pattern..37 (9.mm).7 (19mm) Dimmable with most magnetic transformers 1.29 (33mm) PART NUMBER: BIN G4 RECTANGLE WAFER Beam Spread Replaces Chipset V AC/DC 2W Halogen 8 60 Samsung 3,000 9

14 MR (2mm) 1.2 (32mm) The Brilliance LED MR-8 LED lamp has been redesigned to better fit into standard, low voltage, MR-8 fixtures. These LED s are thermally engineered to operate in enclosed fixtures and provide added security by automatically cooling down (and reducing lumens output) only when exposed to extreme heat (air temperatures above 12 F). In addition, there is no color shift when lumens output is reduced, and the overall lamp life is improved. PART NUMBER: MR8 XXXX XX 2200 RED KELVIN/ GREEN COLOR or 3000 BLUE AMBER BEAMSPREAD Dimmable with most magnetic transformers Enhanced ESD (Electro-Static Discharge) Protection (IEC ) Heat Overload Protection Technology Fully potted PC board UL & FCC compliant Beam Spread Color Replaces Chipset , 30, 60, ,,3000,700 red, green, blue, amber 8-2VAC 10W Halogen 8 61 CREE 0,000 10

15 MR-11 The Brilliance LED MR-11 LED lamp has been redesigned to better fit into standard, low voltage, MR-11 fixtures. These LED s are thermally engineered to operate in enclosed fixtures and provide added security by automatically cooling down (and reducing lumens output) only when exposed to extreme heat (air temperatures above 12 F). In addition, there is no color shift when lumens output is reduced, and the overall lamp life is improved (3mm) 1.8 (40mm) Max current: 2w 0.4a Dimmable with most magnetic transformers Enhanced ESD (Electro-Static Discharge) Protection (IEC ) Heat Overload Protection Technology Fully potted PC board UL & FCC compliant PART NUMBER: MR11 2 XXXX XX RED GREEN or BLUE AMBER KELVIN/ COLOR BEAMSPREAD Beam Spread Color Replaces Chipset , 30, 60, ,,3000,700 red, green, blue, amber 8-2VAC 20W Halogen 8 61 CREE 0,000 11

16 AR (3mm) 1.68 (42.7mm) The Brilliance LED AR-11 Double Contact Bayonet has been redesigned to better fit into standard, low voltage, AR-11 fixtures. These LED s are thermally engineered to operate in enclosed fixtures and provide added security by automatically cooling down (and reducing lumens output) only when exposed to extreme heat (air temperatures above 12 F). In addition, there is no color shift when lumens output is reduced, and the overall lamp life is improved. PART NUMBER: AR11 2 XXXX XX 2200 RED GREEN or 3000 BLUE 700 AMBER KELVIN/ COLOR BEAMSPREAD Dimmable with most magnetic transformers Enhanced ESD (Electro-Static Discharge) Protection (IEC ) Heat Overload Protection Technology Fully potted PC board UL & FCC compliant Beam Spread Color Replaces Chipset , 30, ,,3000,700 red, green, blue, amber 8-2VAC 20W Halogen 8 61 CREE 0,000 12

17 MR-16 ECOSTAR The Brilliance LED MR-16 ECOSTAR, 4 watt, LED lamp is designed to fit into standard, low voltage fixtures. Best suited for budget-conscious landscape lighting projects (0mm) Suitable for damp locations Suitable for totally enclosed luminaries Input electrical current: 330mA AC 1.89 (48mm) PART NUMBER: MR16 4 ECO XXXX XX KELVIN TEMPERATURE BEAMSPREAD Beam Spread Replaces Chipset ,30, 60, 3000, VAC 20W Halogen Epistar 30,

18 MR-16 PREMIUM 1.97 (0mm) 1.89 (48mm) The Brilliance LED MR-16 LED lamp has been redesigned to better fit into standard, low voltage, MR-16 fixtures. These LED s are thermally engineered to operate in enclosed fixtures and provides added security by automatically cooling down (and reducing lumens output) only when exposed to extreme heat (air temperatures above 12 F). In addition, there is no color shift when lumens output is reduced, and the overall lamp life is improved. PART NUMBER: MR16 X XXXX XX RED GREEN BLUE AMBER 4 WATTAGE 7 KELVIN/COLOR BEAMSPREAD Dimmable with most magnetic transformers Enhanced ESD (Electro-Static Discharge) Protection (IEC ) Heat Overload Protection Technology Fully potted PC board UL & FCC compliant LUMEN OUTPUT 2200K K 3000K 700K 4W W 7W N/A Beam Spread Color Replaces Chipset 1, 30, 60, 120 red,green,blue, amber(4&w only) 8-2 VAC 20/3/0W Halogen 8 61 CREE 0,000 14

19 MR-16 EDGE The MR-16 EDGE Series is designed for use in both enclosed fixtures and open fixtures where precision lighting and very high color rendering are required. Ideal for indoor and outdoor applications that require superior color rendering. Perfect for recessed downlights, track lights, wall washing, accent and in-ground lighting. Works with electronic and magnetic drivers. Dimmable with most magnetic transformers. Dimmable with electronic transformer part #B+L EX9101 and part #B+L FX9100, and dimmer combination Lutron DVELV-300P. 80% more efficient than halogen equivalent Equivalent to 0W halogen. Fits all standard fixtures designed for MR16. Runs cooler than other brands. Suitable for damp locations. Engineered for use in totally enclosed fixtures UL & FCC compliant USES: Great for retail, restaurants, galleries, gardens, residential and commercial uses. PART NUMBER: MR16 EDGE 7 XXXX XX (0mm) KELVIN/COLOR BEAMSPREAD 1.89 (48mm) Beam Spread Chipset 7 47, 496 1, 30, 60, VAC CREE XPL-HI ,000 1

20 PAR (111mm) 2.28 (8mm) The Brilliance LED PAR-36 LED lamp has been redesigned to better fit into standard, low voltage, PAR-36 fixtures. These LED s are thermally engineered to operate in enclosed fixtures and provides added security by automatically cooling down (and reducing lumens output) only when exposed to extreme heat (air temperatures above 12 F). In addition, there is no color shift when lumens output is reduced, and the overall lamp life is improved. PART NUMBER: PAR36 X XXXX XX RED GREEN BLUE AMBER 6 WATTAGE 9 12 KELVIN/COLOR BEAMSPREAD Dimmable with most magnetic transformers Enhanced ESD (Electro-Static Discharge) Protection (IEC ) Heat Overload Protection Technology Fully potted PC board UL & FCC compliant LUMEN OUTPUT 2200K K 3000K 700K 6W 9W 12W Beam Spread Color Replaces Chipset 1, 30, 60, 120 red,green,blue, amber(6&9w only) 2200,, 3000, VAC 20/3/0W Halogen 8 68 CREE 0,000 16

21 S VOLT This Brilliance LED S-14 lamp is specifically designed for a 12VAC power system. The S-14 replaces traditional incandescent or halogen lamps. Designed as a direct retrofit for most S-lamps Color rendering of 80 Great compatibility w/ TRIAC dimmers Shock & vibration resistant High power factor UV & NIR radiation-free Mercury-free Standard deviation color matching 1.97 (0mm) 3.46 (88mm) PART NUMBER: BRI S14 XXXX KELVIN TEMPERATURE Beam Spread Replaces Chipset , 3000, VAC 20W Halogen 8 6 CREE 0,000 17

22 CANDELABRA 12 VOLT 1.26 (32mm) 4.2 (11mm) This Brilliance LED Candelabra is decorative, dimmable, clear and designed for a 12VAC power system, which can be installed into any standard E12 or E14 socket. It is energy efficient, saving up to 8% on energy costs, vibration resistant, and it features a multi-directional beam pattern making it ideal for many general lighting applications. PART NUMBER: BRI CAN 12 C XXXX X 12 (VAC) 2200 (2w only) (2w only) E12 Clear = C KELVIN TEMPERATURE 2 (FLAME) 4 (BLUNT) WATTAGE UL listed & FCC compliant Dimmable with most magnetic transformers Environmentally friendly Maintenance free Candelabra adapter available Beam Spread Replaces 2 or 4 100, ,, 3000, 000 2W & 40W Halogen ,000 18

23 STR LIGHT The Brilliance LED AC Flex Strip Light is rated for outdoor use and can be directly connected to an existing 8-16 VAC landscape lighting system. Great accent lighting for stairs, railings and overhangs. The LEDs on this Strip Light are encased in non-yellowing material that installs easily. Dimmable with most magnetic transformers Max length for power feed is 39 4 Available in 82.2 ft reels PART NUMBER : BRI SL3 XXXX red green blue KELVIN TEMP/COLOR Color 1.8 per meter 4 per ft, 000 red, green, blue 8-16 VAC ,000 3 NOT for installation within of swimming pool or other water source 13. mm (0.31 ) 6 mm ) BACK 30 cm Example without end connections CUT MARK 19

24 STR LIGHT ACCESSORIES Double-Sided Connector Kit Part # Double-Sided Connector 2 - Clear Plastic Retainers 2 - Metal Anti-Slip Plates 1 - Heat Shrink Tube Jumper Connector Kit Part # Jumper Connector 2 - Clear Plastic Retainers 2 - Metal Anti-slip Plates 2 - Heat-shrink Tubes 90 Jumper Connector Kit Part # Jumper Connector 2 - Clear Plastic Retainers 2 - Metal Anti-slip Plates 2 - Heat-shrink Tubes Power Feed Kit Part # Power Feed 1 - Clear Plastic Retainer 1 - Metal Anti-slip Plate 1 - Heat-shrink Tube T Power Feed Connector Kit Part # T Power Feed Connector 2 - Clear Plastic Retainers 2 - Metal Anti-slip Plates 2 - Heat-shrink Tubes End Cap Kit Part # End Cap 1 - Light Shield 1 - Heat-shrink Tube Strip Light Channel* (Gen 2) w/ Groove Part # m (3.2 ) Channel sections - Screws Strip Light Channel* (Gen 2) w/ Groove & Glare Shield Part # m (3.2 ) Channel sections - Screws Clip & Screw Kit Part # Plastic Clips Screws Diffuser Part # Only works with Gen 2 Channel models Attachment Clip Part # Only works with Gen 2 Channel models Stealth Connector Shields* Part # Part # (w/ Facia) Only works with Gen 2 Channel models *Note: While the aluminum extrusion material will not be adversely affected by conventional Ultraviolet (UV) & Infrared (IR) exposure, the black dye used in the anodizing process is an organic material and will experience fading over time depending on the level of exposure to Ultraviolet (UV) & Infrared (IR) from sunlight. The amount of fading will be determined by the above stated factors. For this reason, Brilliance LED makes no warranty or guarantee for discoloration when this product is used in an outdoor application or is exposed to direct sunlight. 20

25 LIGHT BAR Made in the USA, the Light Bar is easy to install and comes in assorted sizes. Rugged construction with anodized aluminum rail. 6 lead of18 gauge direct burial wire Custom lengths up to 90 Custom colors available Dimmable w/ most magnetic transformers Mounting Brackets available Shield available in copper and stainless steel for 3 & 6 only Input Voltage Chipset Length LEDs Watts 1/4 9 1/ / NOT for installation within of swimming pool or other water source ATTENTION: Operating voltage range is 8-18 Volts AC/DC 8-18VAC 12VAC CREE PART NUMBER: BRI XXXX LED XX Light Bar = LB Mounting Bracket = MB LB & MB Kit = LBMB # of LED s 36 Optional - Light Bar Shield (3 & 6 LED only) PART NUMBER: LBS X XXXXXX # of LED s 36 Material COPPER STAINLESS STEEL 9 Optional: Light Bar Shield in 3 and 6 LEDs

26 AQUABEAM PART NUMBER: AQUABEAM XX XXXX Beam Spread WATTAGE KELVIN TEMPERATURE & & 700 4, 3000, VAC/DC ,000 The Brilliance LED AquaBeam was designed with high lumen and superior color rendition for the extremely wet or underwater applications. This integrated LED specialty fixture is made in the USA; it is fabricated of precision machined aluminum and is fully potted. The coating process allows for superior abrasion and corrosion resistance even in the harshest of environments. It has been tested in the harshest conditions for 100+ days. Fully submersible application Can be installed indoor and outdoor Dimmable with most magnetic transformers The latest in CREE COB technology Fully potted electronics Abrasion and corrosion resistant Environmentally friendly & energy efficient *Note: Corrosive chemicals in the water of ponds and fountains as well as natural hard water and salt water could affect the appearance of the coating, but will not impact functionality of the product. For this reason, Brilliance LED makes no warranty or guarantee for change in appearance when this product is used in water, as it is designed to be used. 3 (76.2mm) 3 (76.2mm) 3 (76.2mm) 1.7 (43.2mm) 22

27 BRILLIANCE DIMMER The Brilliance Dimmer Switch provides for 12VAC dimming up to 120 watts. This unit can be mounted next to the 12VAC transformer or anywhere out in the field. Installs in single-gang deep junction box on low-voltage side of magnetic step-down transformer Current capacity: 10 Amps Compatible with all Brilliance LED lamps Must be installed in a deep junctionbox Always use supplied gasket No minimum load Dimmer range may vary depending upon load that is applied PART NUMBER: 12 VAC Brilliance Dimmer Switch VAC

28 PAR (67mm) 3. (89mm) The PAR (Indoor/Outdoor) Series is designed specifically as an energy saving alternative to traditional halogen PAR lamps, making them ideal for general lighting. Designed for 120VAC, 60Hz universal power, they can be installed into any standard E26 medium socket. The lamps are corrosion resistant. Each lamp is made with CREE XP-E high power chipset. PART NUMBER: PAR 20 IOS XXXX XX XX KELVIN TEMPERATURE 2 40 BL = Black WH = White BEAMSPREAD HOUSING Dimmable Shock and vibration resistant UV, NIR radiation & mercury free Black & white housing options Suitable for totally enclosed fixtures UL & FCC compliant Beam Spread Input Voltage Replaces Chipset 7 320(k),340(3000K), 460(700K) 2, 40, 3000, 700 AC V/60Hz 0W Halogen CREE XP-E 3,

29 PAR-30 The PAR (Indoor/Outdoor) Series is designed specifically as an energy saving alternative to traditional halogen PAR lamps, making them ideal for general lighting. Designed for 120VAC, 60Hz universal power, they can be installed into any standard E26 medium socket. The lamps are corrosion resistant. Each lamp is made with CREE XP-E high power chipset (94mm) 3.6 (93mm) Dimmable Shock and vibration resistant UV, NIR radiation & mercury free Black or white housing Suitable for totally enclosed fixtures UL & FCC compliant PART NUMBER: PAR 30 IOS XXXX XX XX KELVIN TEMPERATURE 2 40 BL = Black WH = White BEAMSPREAD HOUSING Beam Spread Input Voltage Replaces Chipset /730/800 2, 40, 3000, 700 AC V/60Hz 7W Halogen CREE XP-E 3,000 2

30 PAR (121mm).12 (130mm) The PAR (Indoor/Outdoor) Series is designed specifically as an energy saving alternative to traditional halogen PAR lamps, making them ideal for general lighting. Designed for 120VAC, 60Hz universal power, they can be installed into any standard E26 medium socket. The lamps are corrosion resistant. Each lamp is made with CREE XP-E high power chipset. PART NUMBER: PAR 38 IOS XXXX XX XX KELVIN TEMPERATURE 2 40 BL = Black WH = White BEAMSPREAD HOUSING Dimmable Shock and vibration resistant UV, NIR radiation & mercury free Black or white housing Suitable for totally enclosed fixtures UL & FCC compliant Beam Spread Input Voltage Replaces Chipset , 80, 110 2, 40, 3000, 700 AC V/60hz 100W Halogen 8 64 CREE XP-E 3,

31 GU-10 EDGE The Brilliance LED GU-10 EDGE is designed for use in both indoor and outdoor VAC GU- 10 base fixtures where precision lighting and very high color rendering are preferred or required. UL listed Ideal for indoor and outdoor applications that require superior color rendering Perfect for recessed downlighting, track lighting, wall washing, accent and in-ground lighting Dimmable with most C+L dimmers 80% more efficient than halogen equivalent Equivalent to 0 watt halogen Fits all standard fixtures designed for GU-10 Runs cooler than other brands Suitable for damp locations Engineered for use in totally enclosed fixtures UL & FCC compliant PART NUMBER: GU10 EDGE XX (0mm) BEAMSPREAD 2.17 (mm) Beam Spread Replaces Chipset 29 1, 30, 60, VAC 0W Halogen CREE XPL-HI 0,000 27

32 PAR-16 EDGE (98mm) PART NUMBER: PAR16 EDGE XXXX XX KELVIN TEMP BEAMSPREAD 1.89 (98mm) The Brilliance LED PAR-16 EDGE is designed for use in both outdoor enclosed and indoor open fixtures where precision lighting and high color rendering is preferred or required. UL Listed Perfect for recessed downlighting, track lighting, wall washing, accent and in-ground lighting Ideal for indoor and outdoor applications that require superior color rendering 80% more efficient than halogen equivalent Equivalent to 3W Halogen Fits all standard fixtures designed for 120V medium base MR-16 Runs cooler than other brands Suitable for damp locations Engineered for use in totally enclosed fixtures UL & FCC compliant Beam Spread Input Voltage Chipset 31 1, 30, 60, V 93 CREE 0,000 28

33 G-9 EDGE The Brilliance LED G9 EDGE is an ideal replacement for halogen G9 lamps and provides excellent performance with its retrofit design. Suitable for most existing fixtures, this lamp offers extremely long life and low power consumption, and it is maintenance free. 0. (12.7mm) 1.7 (44.4mm) Dimmable G-9 Base UV Free Thermal ceramic body Excellent heat dissipation CAUTION: Risk of electric shock, use in dry locations only, not for use in totally enclosed fixtures. PART NUMBER: BRI G9 EDGE 120 Beam Spread Input Voltage Replaces H 360 V 120VAC 2W Halogen ,

34 A-19 EDGE FILAMENT 2.38 (60.4mm) 4.19 (106.43mm) The Brilliance LED Edge Filament lamps are a decorative light source in VAC. These K lamps with 9 give the effect of an original Edison lamp. This lamp is great for any place a warm light source is needed. Replaces 60W Incandescent UL Listed in USA and Canada Clear, omni-directional light source Elegant, exposed filament design Dimmable UL & FCC compliant PART NUMBER: A19 FIL EDGE XXXX 2200 CR I , VAC ,

35 S-14 EDGE FILAMENT The S14 Edge Filament is designed for use in both outdoor and indoor open fixtures where precision lighting and high color rendering is required. This lamp is ideal for inverted bistro style lighting (4mm) UL listed Clear, omni-directional light source Elegant, exposed filament design Dimmable UL & FCC compliant 3.2 (82.6mm) PART NUMBER: S14 FIL EDGE , 12VAC, VAC ,

36 S-21 EDGE FILAMENT 2. (63.mm) The S-21 Edge Filament lamps are a decorative light source in VAC. These K lamps with 9 give the effect of an original Edison lamp. This lamp is great for any place a warm light source is needed.. (139.7mm) Replaces 40 Watt Incandescent UL listed in USA and Canada Clear, omni-directional light source Elegant, exposed filament design Dimmable UL & FCC compliant PART NUMBER: S21 FIL EDGE VAC ,

37 CANDELABRA EDGE FILAMENT The Brilliance LED Edge Filament lamps are a decorative light source in VAC. These K lamps with 9 give the effect of an original Edison lamp. These are great for indoor chandeliers and anywhere a warm light source is needed (34.04mm) 3.81 (96.77mm) 1.2 (31.7mm) 3.7 (9.2mm) Replaces 40W Incandescent UL Listed in USA and Canada Flame tip and Blunt tip styles Clear or frosted omni-directional light source Elegant exposed filament design Dimmable UL & FCC compliant PART NUMBER: CAN FIL EDGE X X XXXX Blunt = B Flame = F 2200 Clear = C Frosted = F KELVIN TEMPERATURE , VAC ,

38 PHOTOMETRICS MR-8 K 1 CANDLE POWER= MR-8 K 30 CANDLE POWER= MR-8 K 60 CANDLE POWER= MR-8 K 120 CANDLE POWER= MR/AR-11 K 60 CANDLE POWER= MR-16 K 30 4W CANDLE POWER= MR/AR-11 K 1 CANDLE POWER= MR-11 K 120 CANDLE POWER= MR-16 K 60 4W CANDLE POWER= MR/AR-11 K 30 CANDLE POWER= MR-16 K 1 4W CANDLE POWER= MR-16 K 120 4W CANDLE POWER=

39 PHOTOMETRICS MR-16 K 1 W CANDLE POWER= MR-16 K 120 W CANDLE POWER= MR-16 K 60 7W CANDLE POWER= MR-16 EDGE K 30 7W CANDLE POWER= MR-16 K 30 W CANDLE POWER= MR-16 K 1 7W CANDLE POWER= MR-16 K 120 7W CANDLE POWER= MR-16 EDGE 3000K 1 7W CANDLE POWER= MR-16 K 60 W CANDLE POWER= MR-16 K 30 7W CANDLE POWER= MR-16 EDGE K 1 7W CANDLE POWER= MR-16 EDGE 3000K 30 7W CANDLE POWER=

40 PHOTOMETRICS PAR-20 K 2 7W CANDLE POWER= PAR K 40 7W CANDLE POWER= PAR-20 K 40 7W CANDLE POWER= PAR K 2 7W CANDLE POWER= PAR K 2 7W CANDLE POWER= PAR K 40 7W CANDLE POWER= PAR-30 K 2 12W PAR-30 K 40 12W CANDLE POWER= CANDLE POWER= PAR K 2 12W CANDLE POWER= PAR K 40 12W CANDLE POWER= PAR K 2 12W CANDLE POWER= PAR K 40 12W CANDLE POWER=

41 PHOTOMETRICS PAR-36 K 1 6W CANDLE POWER= PAR-36 K 1 9W CANDLE POWER= PAR-36 K 1 12W CANDLE POWER= PAR-38 K 2 17W CANDLE POWER= PAR-36 K 30 6W CANDLE POWER= PAR-36 K 30 9W CANDLE POWER= PAR-36 K 30 12W CANDLE POWER= PAR K 2 17W CANDLE POWER= PAR-36 K 60 6W CANDLE POWER= PAR-36 K 60 9W CANDLE POWER= PAR-36 K 60 12W CANDLE POWER= PAR K 2 17W CANDLE POWER=

42 PHOTOMETRICS PAR-38 K 40 17W CANDLE POWER= PAR K 40 17W CANDLE POWER= PAR K 40 17W CANDLE POWER=

43 VOLT AMPS Description Watt Power Factor Volt Amps MICRO G-4 MICRO T- BEACON T- BEACON SCB BEACON S-8 DYNASTY G-4 DYNASTY SCB MR-8 MR-11 AR-11 MR-16 MR-16 MR-16 PAR-36 PAR-36 PAR-36 S-8 S VAC S VAC PAR-20 PAR-30 PAR-38 STRLIGHT Total Draw on A/C System

44 UPC INDEX LAMP PART NUMBER UPC Micro G4 Bipin BRI BIN MICRO G BRI BIN MICRO G BRI BIN MICRO G BRI BIN MICRO G4 RED BRI BIN MICRO G4 GREEN BRI BIN MICRO G4 BLUE BRI BIN MICRO G4 AMBER Micro T Wedge BRI MICRO T Beacon G4 Beacon G Beacon G Beacon G Beacon T Beacon T Beacon T Beacon T Beacon SCB Beacon SCB Beacon SCB Beacon SCB Beacon DCB Beacon DCB Beacon DCB Beacon DCB Beacon S8 Beacon S Beacon S Beacon S G4 Round Wafer BIN G4 RND WAFER G4 Rectangle Wafer BIN G4 REC WAFER MR-8 MR MR MR MR MR8 1. RED MR8 1. GREEN MR8 1. BLUE MR8 1. AMBER MR MR MR MR MR8 1. RED MR8 1. GREEN MR8 1. BLUE MR8 1. AMBER MR MR MR MR MR8 1. RED MR8 1. GREEN MR8 1. BLUE MR8 1. AMBER MR MR MR MR-11 MR MR MR MR MR11 2 RED MR11 2 GREEN MR11 2 BLUE MR11 2 AMBER MR MR MR MR MR11 2 RED MR11 2 GREEN MR11 2 BLUE MR11 2 AMBER MR MR MR MR MR11 2 RED MR11 2 GREEN MR11 2 BLUE MR11 2 AMBER MR MR MR AR-11 AR AR AR AR AR11 2 RED AR11 2 GREEN AR11 2 BLUE AR11 2 AMBER AR AR AR AR AR11 2 RED AR11 2 GREEN AR11 2 BLUE

45 UPC INDEX AR11 2 AMBER AR AR AR AR AR11 2 RED AR11 2 GREEN AR11 2 BLUE AR11 2 AMBER MR-16 MR watt MR MR MR MR16 4 RED MR16 4 GREEN MR16 4 BLUE MR16 4 AMBER MR MR MR MR MR16 4 RED MR16 4 GREEN MR16 4 BLUE MR16 4 AMBER MR MR MR MR MR16 4 RED MR16 4 GREEN MR16 4 BLUE MR16 4 AMBER MR MR MR MR-16 MR watt MR MR MR MR16 RED MR16 GREEN MR16 BLUE MR16 AMBER MR MR MR MR MR16 RED MR16 GREEN MR16 BLUE MR16 AMBER MR MR MR MR MR16 RED MR16 GREEN MR16 BLUE MR16 AMBER MR MR MR MR-16 MR watt MR MR MR MR MR MR MR MR MR MR MR MR MR MR MR-16 ECOSTAR MR16 4 ECO watt MR16 4 ECO MR16 4 ECO MR16 4 ECO MR16 4 ECO MR16 4 ECO MR16 4 ECO MR16 4 ECO MR16 4 ECO MR-16 EDGE MR16 EDGE watt MR16 EDGE MR16 EDGE MR16 EDGE MR16 EDGE MR16 EDGE PAR-36 PAR watt PAR PAR

46 UPC INDEX PAR PAR36 6 RED PAR36 6 GREEN PAR36 6 BLUE PAR36 6 AMBER PAR PAR PAR PAR PAR36 6 RED PAR36 6 GREEN PAR36 6 BLUE PAR36 6 AMBER PAR PAR PAR PAR PAR36 6 RED PAR36 6 GREEN PAR36 6 BLUE PAR36 6 AMBER PAR PAR PAR-36 PAR watt PAR PAR PAR PAR36 9 RED PAR36 9 GREEN PAR36 9 BLUE PAR36 9 AMBER PAR PAR PAR PAR PAR36 9 RED PAR36 9 GREEN PAR36 9 BLUE PAR36 9 AMBER PAR PAR PAR PAR PAR36 9 RED PAR36 9 GREEN PAR36 9 BLUE PAR36 9 AMBER PAR PAR PAR-36 PAR watt PAR PAR PAR PAR PAR PAR PAR PAR PAR PAR PAR PAR PAR S14 S14 12VAC K S14 12VAC 3000K S14 12VAC 000K S14 EDGE S14 FIL EDGE 12VAC S14 FIL EDGE 12VAC Light Bar BRI LB LED BRI LB LED BRI LB LED LB Mounting Brackets BRI MB LED BRI MB LED BRI MB LED Light Bar Kits BRI LBMB LED BRI LBMB LED BRI LBMB LED Light Bar Shield LBS LED3 C LBS LED3 SS LBS LED6 C LBS LED6 SS ADAPTER ADAPTER DCB TO G4 BIN BRI ACC-2 ADAPTER SCB TO G4 BIN BRI ACC-1 Strip Light BRI SL BRI SL BRI SL3 RED BRI SL3 GREEN BRI SL3 BLUE BRI SL3 CUSTOM BRI SL3 CUSTOM BRI SL3 CUSTOM RED BRI SL3 CUSTOM GREEN BRI SL3 CUSTOM BLUE BRI SL3 CUT Power Feed Kit BRI SL A-PF "T" Power Feed Connector Kit BRI SL A-T

47 UPC INDEX Jumper Connector Kit BRI SL A-JC Jumper Connector Kit BRI SL A Double-Sided Connector Kit BRI SL A-DSC End Cap Kit BRI SL A-EC Clip & Screw Kit BRI SL A-C&S Stealth Connector Shield SL SCS SL SCS w/ FACIA Attachment Clip BRI SL A-AC Channel (Gen 2) BRI SL A-C Channel w/ Shield (Gen 2) BRI SL A-C Channel Diffuser BRI SL A-CD AQUABEAM AQUABEAM AQUABEAM AQUABEAM AQUABEAM AQUABEAM AQUABEAM PAR16 EDGE PAR16 EDGE PAR16 EDGE PAR16 EDGE PAR16 EDGE PAR16 EDGE PAR16 EDGE PAR20 PAR20 IOS 2 BL PAR20 IOS BL PAR20 IOS BL PAR20 IOS 2 WH PAR20 IOS WH PAR20 IOS WH PAR20 IOS 40 BL PAR20 IOS BL PAR20 IOS BL PAR20 IOS 40 WH PAR20 IOS WH PAR20 IOS WH PAR30 PAR30 IOS 2 BL PAR30 IOS BL PAR30 IOS BL PAR30 IOS 2 WH PAR30 IOS WH PAR30 IOS WH PAR30 IOS 40 BL PAR30 IOS BL PAR30 IOS BL PAR30 IOS 40 WH PAR30 IOS WH PAR30 IOS WH PAR38 PAR38 IOS 2 BL PAR38 IOS BL PAR38 IOS BL PAR38 IOS 2 WH PAR38 IOS WH PAR38 IOS WH PAR38 IOS 40 BL PAR38 IOS BL PAR38 IOS BL PAR38 IOS 40 WH PAR38 IOS WH PAR38 IOS WH G9 EDGE BRI G9 EDGE GU10 EDGE GU10 EDGE GU10 EDGE GU10 EDGE GU10 EDGE Candelabra BRI CAN LV 12 C F BRI CAN LV 12 C 2 F BRI CAN LV 12 C F BRI CAN LV 12 C F BRI CAN LV 12 C 4 B BRI CAN LV 12 C B BRI CAN 120 C F BRI CAN 120 C 2 F BRI CAN 120 C F BRI CAN 120 C F BRI CAN 120 C 4 B BRI CAN 120 C B Candelabra Adapter BRI LED CAN ADA Candelabra Edge Filament CAN FIL EDGE B 2200 Clear CAN FIL EDGE F 2200 Clear CAN FIL EDGE B Clear CAN FIL EDGE F Clear CAN FIL EDGE F 2200 Frosted CAN FIL EDGE F Frosted A19 EDGE FILAMENT A19 FIL EDGE A19 FIL EDGE S14 EDGE FILAMENT S14 FIL EDGE S14 FIL EDGE S21 EDGE FILAMENT S21 FIL EDGE BRILLIANCE DIMMER 12VAC DIMMER SWITCH

48 WARRANTY Brilliance LED, LLC is committed to providing our customers with unparalleled quality and service. Your satisfaction is our goal. To this end, Brilliance LED, LLC warrants and guarantees the following: If any product you purchase from Brilliance LED, LLC fails to perform according to specifications, we ask that you contact us immediately. If the product is found to contain defects of material or workmanship, your account will be credited or the product will be replaced at no charge to you. The corresponding credit memo must be used within 6 months. No cash refunds will be issued. Notwithstanding the foregoing, Brilliance LED, LLC reserves the right to inspect any returned/exchanged product for defects. This warranty DOES NOT cover abuse, cosmetic damage, or damage due to acts of God, misuse, negligence,or modification to any part of the Product. This warranty DOES NOT cover damage due to failure to follow directions regarding operation of the Product and also DOES NOT cover connection to improper power-supply (more than 24 volts), lightning strike or other power surge or any other primary side (line voltage) problem, or attempted repair by anyone other than a facility authorized by Brilliance LED, LLC to repair the product. This warranty DOES NOT cover water damage. This warranty specifically disclaims any damage done to user equipment. In no event shall Brilliance LED, LLC be responsible for removal or re-installation of any product or for the expenses associated thereof. This warranty is given only to the original end user customer and may not be assigned or transferred to anyone else. It is the purchaser s obligation to retain proof of purchase documentation which shows the date of purchase. Brilliance LED, LLC will not warrant any defective product that has had its date of manufacture or other such pertinent information altered or removed. Brilliance LED, LLC asks it s dealer network to take a common sense approach examining any faulty product and to use best judgment for replacement. Brilliance LED, LLC warrants to the purchaser that Brilliance LED Lamps will be free from defect in material and workmanship from the date of purchase for the following time periods: Brilliance LED Micro G4-3 years Brilliance LED Strip Lighting - 3 years Brilliance LED RGB Fixtures - 3 years Brilliance LED MR-16 Series - years To submit a warranty claim visit and click the RGA FORM button to download the Excel document, then send the completed warranty RGA forms to: warranty@brillianceled.com Warranty terms are subject to change without notice. Brilliance LED, LLC also reserves the right to modify these warranty terms in order to comply with policy or laws governing warranty issues in states or countries having specific remedies differing or additional to those described within this document. 44

49 For current sales representative contacts in your area, as well as department specific corporate contacts please visit: For a list of stores near you that stock Brilliance LED products please visit: E. Cave Creek Rd Suite 3A Carefree, AZ 8377 P.O. Box 2281 Carefree, AZ 8377 T F Please product orders to: orders@brillianceled.com Photo courtesy of Lightform Lighting LLC Photographer: Carl Schult Digital Imagery