ArcLamp 1.5. Introduction. Datasheet. TX1 ArcMesh. transmitter

Transcription

1 ArcSystem 1.5 Datasheet E26 (ES) base E14 (SES) base B22 (BC) base B15d (SBC) base Introduction ArcSystem is a comprehensive range of LED lighting fixtures and control options specifically designed for auditorium and arena spaces where quality of light, precise dimming control and ease of installation are primary factors. Wired and wireless operation allows for rapid integration of the whole ArcSystem with existing auditorium lighting installations. For those many venues where the clear benefits of LED technology are highly desirable, but modern aesthetics are not, we have created the range. s are available with a variety of mix-and-match specifications to ensure perfect harmony with your traditional light fittings, such as chandeliers and wall sconces: s ARC-D4 Driver Mains power 100 to 240VAC 50/60Hz Two shape styles: Candle and golf ball. Two glass styles: Frosted and clear. ArcMesh wireless protocol Four base types: Edison Screw (E26/ES), Small Edison Screw (E14/SES), Bayonet (B22/BC) and Small Bayonet (B15d/SBC). Two colour temperatures: 2700K and 3000K, plus a Fade to Warm option: While the standard 2700K and 3000K options TX1 ArcMesh mimic tungsten lamps very well, they maintain transmitter the same colour temperature throughout their dimming curve. The Fade to Warm option more closely matches the colour changes seen as a tungsten lamp is dimmed. A flicker effect version of the Fade to Warm lamp is also available. All s operate from a 24VDC supply, with dimming control provided by ARC-D4 drivers. Global Design Solutions Release 1.2b Aug 2017 GDS Ltd ARC-CP8 wireless button panel Mains power DMX in 100 to 240VAC from 50/60Hz lighting console Unit 13, Riverside Business Park, St Anne s Road, Bristol, BS4 4ED, UK Page 1 of 5 Tel: +44 (0)

2 Key features 24VDC operating voltage Designed for use with GDS ARC-D4 (AL) drivers 4.8W consumption 290 lm output CRI 90 Dimmable 100% to absolute zero Ceramic heat sink main body To specify state: A high performance LED luminaire with ceramic heat sink body, designed for use in traditional fittings, such as chandeliers and wall sconces. Very low power consumption of 4.8W to produce 290 lm output at 3000K with a high Colour Rendering Index of 90. s are convection cooled, silent and have smooth stepless dimming to absolute zero when controllable by GDS ArcSystem ARC-D4 (AL) drivers. Low heat generation Available with ES (E26), SES (E14), BC (B22) and SBC (B15d) lamp bases 2700K and 3000K CCT options Fade to Warm and Flicker Effect options also available (see Model variants on page 3) demo kits available Order codes s are available with many different feature combinations. The main order code for any particular variant is a compound of various subcodes that define your feature choices, this is summarised as follows: ALP15 PROTOCOL TYPE LED CCT GLASS BASE ALP15 Pro X FT Fade To Warm X CC Candle Clear K E26 ES FL Flicker CF Candle Frosted K E14 SES WH White GC Golf Ball Clear B22 BC GF Golf Ball Frosted B15d SBC Order code example An with Fade to Warm operation, candle style, frosted glass, 2700K colour temperature and ES base would have the code: ALP15XFTXCF27E26 Note: The Protocol and LED subcodes should be presented as X. These will be determined later in the order process. Release 1.2b Aug 2017 GDS Ltd Page 2 of 5 Tel: +44 (0)

3 Model variants Fade to Warm In order to more closely mimic the colour change of tungsten dimming we have introduced the Fade to Warm (FTW) lamp. Additional amber LEDs have been added which automatically fade in earlier than the white in order to produce this effect. If the effect is not required for any reason it can be turned off via the Arc System commissioning software. Flicker effect To fulfil the demand for a true candle effect we have developed a custom version of the with flicker effect. Available as a variation of the FTW lamp, this lamp ingeniously has two stages of dimming: As the control input rises/falls between 0 and 50%, the lamp will fade with a subtle random flicker. From 50 to 100%, the lamp will dim normally with our fade to warm dimming or simply dim in white, if desired (depending on the chosen mode). Note: Please be aware that flicker lamp models have a lower dimming resolution than standard s. Photometrics (, CCT=2700K) Luminous intensity distribution diagram Planar illuminance curve 135 O 150 O 165 O 180 O 165 O 150 O 135 O O O O 105 O O 90 O O 75 O 60 O 60 O 8 45 O 30 o 15 o 0 o 15 o 30 o 45 O 289 lm C0 - C180 C90 - C O 135 O 90 O 45 O 0 O 45 O 90 O 135 O 180 O C0 - C180 C90 - C lm Release 1.2b Aug 2017 GDS Ltd Page 3 of 5 Tel: +44 (0)

4 Dimensions Golf ball style with E26 (ES) base Weight: 73g (2.57 oz) with E14 (SES) base 37mm (1.46") 92mm (3.62") 25mm (0.98") Ø45mm (1.77") 117mm (4.61") 27mm (1.06") with B22 (BC) base with B15d (SBC) base 111mm (4.37") 117mm (4.61") 25mm (0.98") 26mm (1.02") 27mm (1.06") Release 1.2b Aug 2017 GDS Ltd Page 4 of 5 Tel: +44 (0)

5 Key items within the ArcSystem range TX1 ArcMesh transmitter A vital element in most ArcSystem installations. Controls and coordinates all other elements. ARC-CP8 button panels Provide direct recall for 8 of the 24 preset scenes contained within the TX1 ArcMesh transmitter. ArcMesh Control USB Commissioning Tool & software A USB wireless interface tool plus PC application used to commission and maintain ArcSystem installations. ARC-D1 and ARC-D4 drivers Mains powered compact drivers in various sizes to dim Pro One-Cell fixtures or s according to wireless (or wired) control. Emergency versions also available. Pro One-Cell fixtures A range of high output recessed, and yoke mount, single emitter fixtures. These require the use of a D1 or D4 CC driver. s A range of direct replacement lamps for traditional fixtures. s are designed to closely mimic the light output and dimming response of traditional 60W tungsten lamps. s require the use of an ARC-D4 driver. Pro Multi-Cell (Two to Eight) fixtures Mains powered fixtures with 2, 4 or 8 emitters. All driver and wireless systems on board. Can also be hardwired to the control system where necessary. Emergency versions also available. Sales sales@gds.uk.com Tel: +44 (0) Release 1.2b Aug 2017 GDS Ltd Document number: 80 Global Design Solutions Limited Unit 13, Riverside Business Park, St Anne s Road, Bristol, BS4 4ED, United Kingdom. Support support@gds.uk.com Tel: +44 (0) First issued: Sept 2016 Last revision: Aug 2017