Project: Comments: Prepared By: Shallow. Shallow Pinhole. Control. Code Fixture and Trim D3 Fixed, Round. 9 Watts Watts Watts 18

Transcription

1 Project: Comments: Prepared By: Tunable, fixture produces a wide range of 9+ CRI/ R9 whites from 14K-1,K, as well as pastels and saturated colors Static White platform option produces 9+ CRI/R9 whites, ranging from 27K to 4K Closed-loop color point maintenance to <1 MacAdam ellipse over lifetime and temperature Integrated temperature protection maintains safe operating conditions Wirelessly dimmable to.1% On-board wireless control enables individual addressability and control Shallow Deep HARDWARE ORDERING GUIDE Shallow Pinhole Deep Pinhole TRIM HOUSING FXRD NCIC SP Model Trim Color Trim Fixture/ Trim Platform/ Control Beam Angle Voltage/ Region Housing Type Optic Shipping Option Model Round Shallow Bevel Round Deep Bevel Round Shallow Pinhole Round Deep Pinhole TFRD1 TFRD2 TFRP1 TFRP2 Fixture and Trim Fixed, Round FXRD 9 Watts 9 13 Watts Watts 18 Voltage & Region 12VAC 6Hz, North America VAC 6 Hz, North America 12 Housing Type New Construction, IC/Airtight NCIC Trim Color White Black WH BK Platform & Control Wide Gamut, Tunable BT 27K, Static White B27 3K, Static White B3 35K, Static White B35 4K, Static White B4 Optic 2 (See diagram on page 3) None N Solite S Frost Lens F Hex Louver H Trim 1 2 (See diagram on page 3) None N Solite Lens S Frost Lens F Beam Angle Spot (15 ) Low Glare Flood (25 ) Low Glare Wide Flood () Low Glare Very Wide Flood () Low Glare Spot (15 ) High Output Flood (25 ) High Output Wide Flood () High Output Very Wide Flood () High Output 15L 25L 4L 6L 15H 25H 4H 6H Shipping Option Single Pack (Default, ships with Butterfly Brackets & 24 Nailer Bars to be installed in field) SP 1 Downlight is wet location rated when trim is installed with lens. 2 Either an optic accessory or a trim accessory may be used at a time. They cannot be used simultaneously r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

2 SPECIFICATIONS OPTICAL & ELECTRICAL PERFORMANCE1 ENVIRONMENTAL Lumen Output2 Beam Angle (1'' recess) 9W 13W 18W Pinhole lm multiplier 15 beam, low glare 65lm 882lm 192lm beam, low glare 623lm 845lm 146lm.48 beam, low glare 569lm 772lm 955lm.61 beam, low glare 561lm 76lm 941lm.6 15 beam, high output 682lm 928lm 1148lm beam, high output 678lm 923lm 1142lm.48 beam, high output 646lm 878lm 187lm.54 beam, high output 63lm 857lm 161lm.55 CRI (Ra) Lumen Maintenance 3 Color Spatial Uniformity Color Point Range 4 Equivalent Traditional Lamp Dimming Range 4 Power consumption Voltage Power Factor >.9 Current Efficacy >9 (R9>9) 5, hours to 25 C T A <2 MacAdam ellipses across field angle 14 K 1, K, Fully Saturated, & Pastel 75W halogen.1 1% lm.9 9W.13 13W.18 18W 12VAC 6Hz 277VAC 6Hz 82mA Max Beam Angle (1'' recess) 9W 13W 18W 15 beam, low glare 72lm/W 68lm/W 61lm/W 25 beam, low glare 69lm/W 65lm/W 58lm/W beam, low glare 63lm/W 59lm/W 53lm/W beam, low glare 62lm/W 58lm/W 52lm/W 15 beam, high output 76lm/W 71lm/W 63lm/W 25 beam, high output 75lm/W 71lm/W 62lm/W beam, high output 72lm/W 68lm/W 59lm/W beam, high output 7lm/W 66lm/W 58lm/W Operating Temperature (T A ) - C Storage Temperature -2 - C Humidity Certification Location MECHANICAL Mounting Options Field Replaceable Optics Field Replaceable Light Engine Field Replaceable Power Supply Additional Optic Lens Additional Trim Lens Housing Material Lens Material DIMENSIONS - 95%, Non-condensing UL, cul, RoHS, FCC Class B UL Damp Location, UL Wet Location Available with Trim Lens Hanger Bars/ Butterfly Brackets Yes Yes Yes Ceiling Hole Diameter 4" 2.5" Lens, 1/8" Thick 2.75" Lens, 1/8" Thick Powder Coated Steel, Polymer Glass Trim Outside Diameter Trim Inside Diameter Trim Thickness 1/16" Optics Outside Diameter 2.5" Trim Depth 1", 2" 2.84" Bevel 1.97" Pinhole Ceiling Thickness.625" 1.5" Emitter Vertical Adjustment (tool-free) Housing Vertical Adjustment via Butterfly Bracket Service Position.75" 1.75" Housing Height 3.5" Housing Length 18.38" Housing Width 1" Tilt to 4 Full 364 Rotation Surge Protection Control Protocol 2.5KV KetraNet Mesh 1 All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated. 2 Lumen measurement complies with IES LM-79-8 testing procedures. 3 Lumen maintenance values calculated in accordance to TM-21 procedures based on LM-8 compliant measurement data. 4 Intensity and color point controlled via Ketra s wireless network r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

3 COMPONENT ORDERING GUIDE REPLACEMENT OPTICS ACCESSORIES MOUNTING KITS OP MA Type Recessed Downlight Beam Angle Recessed Downlight Type Recessed Downlight Mounting Type Optic Beam Angle Spot (15 ) Low Glare Flood (25 ) Low Glare Wide Flood () Low Glare Very Wide Flood () Low Glare Spot (15 ) High Output Flood (25 ) High Output Wide Flood () High Output Very Wide Flood () High Output OP 15L 25L 4L 6L 15H 25H 4H 6H Trim Lens, Round Bevel, Solite Trim Lens, Round Bevel, Frost Trim Lens, Pinhole, Solite Trim Lens, Pinhole, Frost Optic Solite Optic Frost Optic Hex Louver TLRDFS TLRDFF TLPINS TLPINF OAS OAF OAH Type Mounting Mounting Note: Downlight is wet location rated when trim is installed with lens. Note: Only one optional optical or trim accessory can be used at a time. MA (2) Butterfly Brackets B (2) 24 (6.9cm) Nailer Bar N LENS ACCESSORY PLACEMENT EMITTER HEAT SINK OPTIC HOUSING OPTIC ACCESSORY OR TRIM LENS CEILING TRIM r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

4 ROUND BOX 3815 S. CAPITAL OF SUITE 1 AUSTIN, TX P: FIXED, ROUND HOUSING FOR FLANGED TRIMS X DIMENSION DRAWINGS HOUSING ROUND BOX.89" [22.5mm] ALL KNOCKOUTS 3.5" [88.9mm] 3.9" [78.5mm].63" [16mm] 6.37" [162.mm] 3.96" [1.5mm] 1.7" [256.mm] FO 18.38" [467.mm] FOR REFEREN DRAWIN NOT FO CONSTRUC DRAWIN REVISIO DATE: 1 DRAWING TYPE: PDD DRAWN DRAWING #: REVISION #: 1 CHECKE DATE: 11/7/216 SCALE: DRAWN BY: SC, CEH CHECKED BY: GEB SCALE: NTS DO SHEET NA - PROD DOCUMENT D 1 SHEET OF r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

5 FLANGED ROUND PROFILE TRIMS PINHOLE FLAN FIXED, ROUND DIMENSION DRAWINGS FLANGED PINHOLE FLAN BEVEL TRIM ROUND PROFILE TRIMS SHALLOW BEVEL 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: FLANGED 1.8" [27.5mm] PINHOLE FLANGED [117.5mm] ROUND PROFILE TRIMS 2.84" [72.mm] ROUND PROFILE TRIMS FLANGED [117.3mm] PINHOLE DEEP FLANGED BEVEL 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: Ceiling FLANGED Hole Diameter 4" [11.6mm] 1.85" [46.9mm] PINHOLE FLANGED [117.3mm] PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. PROPRIETARY PINHOLE THE INFORMATION CONTAINED TRIM IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. FOR REFERENCE ONLY NOT FOR CONSTRUCTION DRAWING TYPE: 5 DRAWING #: 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: REVISION #: 1 DATE: 11/7/216 DRAWN BY: SC, CEH CHECKED BY: GEB PINHOLE FLANGED 1.2" [3.5mm] SHALLOW PINHOLE [117.3mm] SCALE: NTS FOR REFERENCE SHEET NAME ONLY NOT FOR CONSTRUCTION - PRODUCT DOCUMENT DRAWING DRAWING TYPE: 5 DRAWING FOR REFERENCE #: SHEET ONLY REVISION #: 1 NOT FOR CONSTRUCTION DATE: 11/7/216 DRAWN BY: SC, CEH 5 OF 6 [117.5mm] 1.97" [5.1mm] CHECKED BY: GEB DRAWING TYPE: 5 SCALE: NTS DRAWING #: REVISION #: 1 DEEP PINHOLE DATE: 11/7/216 SHEET NAME DRAWN BY: SC, CEH - PRODUCT CHECKED DOCUMENT BY: GEB DRAWING SCALE: NTS Ceiling Hole Diameter 4" [11.6mm] 2.2" [55.9 mm] SHEET SHEET NAME - PRODUCT DOCUMENT 5 OFDRAWING 6 [117.3mm] SHEET 5 OF 6 FOR REFERENCE ONLY r4 NOT FOR Specifications CONSTRUCTION are subject to change without notice Designed in Austin, TX DRAWING TYPE: 5 ketra.com 217 Ketra, Inc. All rights reserved DRAWING #: REVISION #: 1 DATE: 11/7/216 DRAWN BY: SC, CEH

6 ISO FOOTCANDLE CHARTS: 27K, 3K, 35K, 4K DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: 15 SPOT, LOW GLARE BEAM ANGLE: 15 SPOT, HIGH OUTPUT FXRD18BT15L 18W FXRD18BT15H 18W BEAM ANGLE: 25 SPOT, LOW GLARE BEAM ANGLE: 25 SPOT, HIGH OUTPUT FXRD18BT25L 18W FXRD18BT25H 18W All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

7 ISO FOOTCANDLE CHARTS: 27K, 3K, 35K, 4K DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: WIDE FLOOD, LOW GLARE FXRD18BT4L 18W BEAM ANGLE: WIDE FLOOD, HIGH OUTPUT FXRD18BT4H 18W BEAM ANGLE: 6 VERY WIDE FLOOD, LOW GLARE FXRD18BT6L 18W BEAM ANGLE: 6 VERY WIDE FLOOD, HIGH OUTPUT Product 1 FXRD18BT6H 18W All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved

8 WIDE GAMUT y 52 CIE 1931 Color Chart Green:.256,.6 Ketra s tunable spectrum downlight can easily be configured via Ketra s intuitive Design Studio software. The product can reproduce any color point within the triangle shaped gamut indicated in the chart below. With Ketra s innovative optical and thermal feedback system, the color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range.5 5 Green 58 Red:.681, Blue 36 Black Body Red 7 Blue:.17,.11 x Calibrated Gamut: color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range Expanded Gamut: Color calibration is relaxed such that each product produces the most saturated color it is capable of. GENERAL SPECIFICATIONS LED downlight shall employ closed loop optical and thermal feedback capable of maintaining color point accuracy of <1 MacAdam ellipse. LED downlight shall have color spatial uniformity of <2 MacAdam ellipses over full field angle. LED downlight shall have an integrated wireless control onboard. LED downlight shall be capable of a CRI >9 along the Black Body Curve from 27-5K. LED downlight lamp shall be a single source multi-die emitter consisting of both monochromatic and phosphor converted blue LED dye. LED downlight shall be sealed, meeting UL damp location (and UL Wet Location with Wet Location Trim) requirements. LED downlight shall be dimmable to.1% of measured luminous flux with wireless dimming. LED downlight shall be UL listed and RoHS compliant. LED downlight shall be capable of in situ firmware and software upgrades. Ketra LED Fixtures are warrantied to be free from material defects in material and workmanship for five (5) years or 25, hours from date of shipment, whichever is less. LED Fixture shall be # r4 Designed in Austin, TX ketra.com 217 Ketra, Inc. All rights reserved