01 1 Labyrinth Puzzle

Transcription

1 01 1 Labyrinth Puzzle Puzzle Goal: Materials: Classification: Remove the coin. Trespa, Acrylic, steel balls Routefinding puzzle

2 01 1 Labyrinth Puzzle Puzzle Solution:

3 02 13 Triangles Puzzle Goal: Materials: Classification: Place the 13 different triangles into the tray, using either an all-orthogonal or all-diagonal grid. Alder, walnut Put-together

4 02 13 Triangles Puzzle Solution:

5 03 3 Color Cube Puzzle Goal: Materials: Classification: Notes: Make a red cube. Make a yellow cube. Make a blue cube. Wood - beech Put together The cube is dissected into 24 pieces, in a way that the total surface area is three times the surface of the cube; so it is possible to make 3 different colored cubes with the pieces. Other possible patterns are shown on the solution page.

6 03 3 Color Cube Puzzle Solution: Here are other patterns to construct:

7 04 3H=6T Puzzle Goal: Materials: Classification: Notes: 1) Fit both types of pieces into the small box, (1/8 of the large box). 2) Put all nine pieces into the large box. 3) Put all nine pieces into the large box so that pieces meet face to face, edge to edge, and vertex to vertex, and there is no gap between pieces. Wood (piece), acrylic (box) 3D Assembly The two puzzle pieces H (Hexagonal Bipyramid) and T (Triangular Antiprismoid) are imaginary cubes, i.e., objects which have square projections in three orthogonal directions just as the cube. H and T also form a tiling of 3D space.

8 04 3H=6T Puzzle Solution:

9 05 3-Layer Tetraxis Array Puzzle Goal: Materials: Classification: Use the set of 61 sticks and blocks to put together seven compositions that symmetrically surround a center: 1) Using one block and the 12 longest sticks 2) Using the 12 blocks and the 12 mid-length sticks 3) Using the 24 shortest sticks 4) Combine 1 & 2 5) Combine 1 & 3 6) Combine 2 & 3 7) Combine 1, 2 & 3 Wood, magnets and silicon bronze Put-together

10 05 3-Layer Tetraxis Array Puzzle Solution:

11 06 3x3x3 Cube with Chess Board Faces Puzzle Goal: Materials: Classification: Assemble the six pieces using partial folding to build a 3x3x3 checkerboard cube. 27 cubes MDF 19 mm, black and red adhesive tape ASS-CART / FOL-HSEP

12 06 3x3x3 Cube with Chess Board Faces Puzzle Solution:

13 07 Arrow Blocks Puzzle Goal: Materials: Classification: Notes: Starting from the position shown, restore the dark arrow, and leave space so that the light arrowhead may also be restored. Box - Indian rosewood, pieces - maple, arrows: yellowheart and Brazilian blackwood Sequential movement The puzzle resembles Bill Cutler's Slide-Blocked Sliding Block Puzzle, but is a completely different concept. Only when restarting the puzzle are you allowed to remove the cover of the frame and freely rearrange the pieces to the starting position (shown below, and with detail on solution page).

14 07 Arrow Blocks Puzzle Solution: Starting configuration: The puzzle cannot be solved normally. Instead, the pieces must first be removed from the box (requiring 21 sliding moves), reassembled into a solution-compatible configuration, then 25 more moves to get to the solution.

15 08 Bare Bones Puzzle Goal: Materials: Classification: Notes: Navigate the maze ball from the starting position at the entrance ring to the treasure position at the goal ring, and then back again. Laser sintered nylon, enamel paints Maze and Route/Dexterity Walls of a conventional 3D maze are replaced with rods. Many rods have been removed, and distracting rods added. A plastic case forms the outer walls so that the core of the maze becomes more visible.

16 08 Bare Bones Puzzle Solution: 1. Open the case and remove the ball - The case is made of two U shaped parts. To open the case, locate the face of the maze that the entrance ring is on. Grip the edges of this face with the tips of the fingers and thumb of one hand, and grip the opposite side using your other hand. Gently pull these opposite faces away from each other to open the case. Pull the case open about ¾ of the way, so the top and bottom are still connected. When the maze is opened the ball will usually fall right out, or fall out with a few turns and shakes. 2. Position the maze ball in the entrance ring inside maze to begin the primary challenge - Turn the case so that the entrance ring is on the bottom. You then slide the maze up a little and place the ball under the entrance ring. Then slide the maze back down so the ring is around the ball. Gently close the case and you are ready to start. If you slide the maze out of the case completely, make sure to reinsert it with the entrance ring on the bottom of one of the U shaped case halves. This way people will know which face of the cube to grip to open it. 3. Navigate the ball to the goal ring - To solve the maze the ball is moved in amounts equal to the width of the cells in the maze, where the maze is 7 cells height, wide and deep. The directions for movement are abbreviated as follows: Right (R), Left (L), Up (U), Down (D), Towards you (T), Away from you (A). For this solution the maze is first oriented by rotating it so that the entrance ring is on the side facing you, and in the lower right corner of this face. Do this while keeping the ball in the corner of the cube at the entrance ring. The solution is then the following list of directional movements from this starting position to the goal: LAURAUULADARDDALULLTDLLUUAURTRTUUAALLTDTTRDDLTDDTRRAUUTULLUUARRR DRTURAALAARDADLL As you can see from the list of moves in the solution, there is no special trick involved in solving the maze, just a sequence of moves is needed. However the challenge is in figuring out how to explore this new type of maze and navigate the ball to desired path segments while not getting lost due to dead ends and other obstacles. 4. Secondary Challenge Solution - To navigate from the exit to the entrance, follow the list of moves above in reverse, and do each move in the opposite direction. If the ball is not currently at the goal ring then open the case and position the ball there similarly to how this is done in steps 1 and 2 for the entrance ring.

17 09 Befuddling Butterfly Puzzle Goal: Materials: Fit the 10 pieces into the tray. There are 231 different solutions. Red alder and walnut Classification: Dimensional assembly puzzle

18 09 Befuddling Butterfly Puzzle Solution: One of 231 solutions:

19 10 Blind Burr Puzzle Goal: Materials: Classification: Disassemble and reassemble. Bloodwood Interlocking

20 10 Blind Burr Puzzle Solution:

21 11 Bloom Puzzle Goal: Materials: Classification: Use the six petals to create a solid circle. Walnut Put-together

22 11 Bloom Puzzle Solution:

23 12 Bottle & Glass Puzzle Goal: Materials: Classification: Separate the bottle from the glass. Glass, rope, wooden beads, metal ring Disentanglement

24 12 Bottle & Glass Puzzle Solution:

25 13 Bubbloid122 Puzzle Goal: Materials: After the puzzle is scrambled the goal is to restore each face of the puzzle to a single solid color. 3D printed nylon, dyed black, screws, vinyl stickers Classification: Twisty puzzle Slocum category 4.5

26 13 Bubbloid122 Puzzle Solution:

27 14 BurrBlock Puzzle Goal: Materials: Classification: Part 1: Remove 4 key pieces (45 steps) Part 2: Disassembly frame (15 steps) Walnut, maple and mahogany notched square sticks Interlocking Solid Puzzle

28 14 BurrBlock Puzzle Solution: BurrBlock solution: 45 steps are needed to remove the 4 key pieces because they are interlocked together with an internal sliding pin. Each key piece will shift upward 1 unit by adjusting the 4 closest control pieces in a lock picking fashion (apply upward pressure on a key piece and adjust the 4 control pieces at the same corner outward ¼ unit feeling for the notches to click into place and allowing the key piece to move upward). The frame is also difficult to take apart, needing 15 non-obvious steps before it comes apart.

29 15 Butterfly & Flowers Puzzle Goal: Materials: Classification: Open the box. Maple, cherry, walnut, and magnet Trick opening

30 15 Butterfly & Flowers Puzzle Solution: Put the box on a table or hold it in hands with the lid on top, butterfly on the right and flowers on the left. Take off the butterfly from the lid and put it on the top of the center of the bigger flower. Then slide the flowers to the right. Now the lid of the box can be opened.

31 16 The "By George" Burr Puzzle Goal: Materials: Classification: Notes: Disassemble and assemble six pieces to form a 6 piece burr-shaped puzzle. East Indian rosewood and maple Interlocking Level serially interlocking burr.

32 16 The "By George" Burr Puzzle Solution:

33 17 Caged Polycubes Puzzle Goal: Materials: Classification: Notes: Fill the cage with the three tetracubes (R,S,T) and four pentacubes (either A,L,N,Q or F,J,L,P). Wood Put-together Use the assembly jig to test out assemblies before trying to put them into the cage. With the 17 non-planar pentacubes and 3 non-planar tetracubes, there are 110 piece combinations with 259 ways to fill the cage after removal of reflections and rotations.

34 17 Caged Polycubes Puzzle Solution:

35 18 Catch 22 Puzzle Goal: Materials: Classification: Notes: Open the box. Argentine lignum vitae Opening After years of working with gravity pin designs, this is the result of what was initially considered a mistake, but was actually a great puzzle in disguise.

36 18 Catch 22 Puzzle Solution:

37 19 Chamfered Cube Puzzle Goal: Materials: Classification: Use either set of 12 sticks to hold the 8 blocks in place at the corners of a cube. Add the other set of sticks to make a large chamfered cube, which is the shape of the small white block that can fit in the center of the arrangement. Wood and magnets Put-together

38 19 Chamfered Cube Puzzle Solution: One way to put these parts together is by starting with just the short sticks and the eight blocks. Attach three sticks around a block. (Figure 1) Repeat the pattern. (Figure 2) Use each long stick to cover up two exposed magnets. (Figure 3) The short sticks can be removed and the holly block can fit in the center of the arrangement. (Figure 4)

39 20 Chaplin Puzzle Goal: Materials: Classification: Arrange the pieces to make a shape of a bowler hat. Wood (bubinga) Put-together puzzle

40 20 Chaplin Puzzle Solution: