Major / Industrial Training Program 2015

VTU BOSCH REXROTH CENTER OF COMPETENCE IN AUTOMATION TECHNOLOGIES

VTU BOSCH REXROTH CENTER OF COMPETENCE IN AUTOMATION TECHNOLOGIES The uniqueness of this training centre lies in its state of the art technology, world class equipment, training kits, hardware, software,

Introduction to PLC and Ladder Logic Programming

Introduction Introduction to PLC and Ladder Logic Programming A PLC (Programmable Logic Controller) is an industrial computer used for automation of electromechanical processes, such as control of machinery

Analog Inputs and Outputs

Analog Inputs and Outputs PLCs must also work with continuous or analog signals. Typical analog signals are 0-10 VDC or 4-20 ma. Analog signals are used to represent changing values such as speed, temperature,

The modular Mechatronics Training System mms 4.0: hands-on, flexible, scalable

The modular Mechatronics Training System mms 4.0: hands-on, flexible, scalable 2 Drive & Control Academy Your Training Partner More knowledge, more benefits: Mechatronics to touch, understand, and use

Abstract. Beyerle, Werner Karat EDV Ltd & Co KG, Koessen, Tyrol and WIFI NÖ

3rd International Conference on Higher Education Advances, HEAd 17 Universitat Politècnica de València, València, 2017 DOI: http://dx.doi.org/10.4995/head17.2017.5102 An affordable and modular development

RoboJunior is a Certified Robotics Summer Camp conceptualised by ARK Technosystems to promote robotics amongst the youth right from grass roots.

What is RoboJunior? RoboJunior is a Certified Robotics Summer Camp conceptualised by ARK Technosystems to promote robotics amongst the youth right from grass roots. This workshop aims to provide a technical

B.E. in Electronics & Communication Engineering, GIT.VTU, Belgavi, Karnataka 2010

Name: NIKHIL R. POTDAR Cell No:+91-7768912454, +91-9986898855 e-mail: nikhilpotdar15@gmail.com / nikhilpotdar55@gmail.com Passport No: H8692315 Visa: B1/B2 US visa valid upto 2027 Address: B104, Aaditva

Process Operation Control (PLC)

Process Operation Control (PLC) Street, 55100 Kuala Lumpur, Malaysia. Tel: +60327326992 Mobile: +601 8909 0379 Fax: +60327326992 Process Operation Control (PLC) Course Objective In this course the participants

GUJARAT TECHNOLOGICAL UNIVERSITY

Type of course: Core GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH: Mechanical/Production/Manufacturing Engineering SUBJECT NAME: Computer Aided Manufacturing SUBJECT CODE: 2171903 BE Semester VII Prerequisite:

Product Family: 05, 06, 105, 205, 405, WinPLC, Number: AN-MISC-021 Terminator IO Subject: High speed input/output device

APPLICATION NOTE THIS INFORMATION PROVIDED BY AUTOMATIONDIRECT.COM TECHNICAL SUPPORT These documents are provided by our technical support department to assist others. We do not guarantee that the data

Industrial Automation

Software Development & Education Center Industrial Automation (HMI Drives Instrumentation Networking) Industrial Automation Automation is the use of machines, control systems and information technologies

Embedded Robotics. Software Development & Education Center

Software Development & Education Center Embedded Robotics Robotics Development with ARM µp INTRODUCTION TO ROBOTICS Types of robots Legged robots Mobile robots Autonomous robots Manual robots Robotic arm

FACULTY OF ENGINEERING

Code No. 2295 / A B.E. 4/4 (EE / Inst. / M/P) II Semester (Main) Examination, April / May 2013 Subject: Intellectual Property Rights (Elective II) Time: 3 Hours Max.Marks: 75 Note: Answer all questions

WifiBotics. An Arduino Based Robotics Workshop

WifiBotics An Arduino Based Robotics Workshop WifiBotics is the workshop designed by RoboKart group pioneers in this field way back in 2014 and copied by many competitors. This workshop is based on the

International Journal of Emerging Technology and Advanced Engineering Website: (ISSN , Volume 2, Issue 7, July 2012)

Introduction of PLC-Based Remote Laboratory for Modular Mechatronics System (MMS) Amriya Tasneem H. R. 1, Dr. K. R. Prakash 2, S.N. Ravi Shankar 3 1 Department of Mechanical Engineering, Malnad College

Industrial Automation Training Academy. Arduino, LabVIEW & PLC Training Programs Duration: 6 Months (180 ~ 240 Hours)

nfi Industrial Automation Training Academy Presents Arduino, LabVIEW & PLC Training Programs Duration: 6 Months (180 ~ 240 Hours) For: Electronics & Communication Engineering Electrical Engineering Instrumentation

Code No: M0326 /R07 Set No. 1 1. Define Mechatronics and explain the application of Mechatronics in CNC Machine tools and Computer Integrated Manufacturing (CIM). 2. (a) What are the various Filters that

TEACHING PLC IN AUTOMATION --A Case Study

TEACHING PLC IN AUTOMATION --A Case Study Dr. George Yang, Assistant Professor And Dr. Yona Rasis, Assistant Professor Department of Engineering Technology Missouri Western State College 4525 Downs Drive

: Windows, MS Office (Word, Excel, Access, Power Point), Internet

103874-ICX-CMOS-E-2007 Senior DCS & Instrument Engineer Holds a B. Sc. in Electronics Engineering (Computer and Control Systems) and has about 10 years hands-on experience working as Instruments & DCS

Electrical Workshop

Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 240 - ETSEIB - Barcelona School of Industrial Engineering 709 - EE - Department of Electrical Engineering BACHELOR'S DEGREE IN

The Modular Mechatronic System from Rexroth. Practise-orientated, efficient, ready to use

The Modular Mechatronic System from Rexroth Practise-orientated, efficient, ready to use Learning as in Real Life Just as the tempo of innovations cycles is constantly increasing, so do the demands on

Star Automations.

+91-8048107668 Star Automations https://www.servoproducts.in/ We are Manufacturer, Exporter & Service Provider for Industrial Automations & Instrumentations products. Such as servo motor, servo drive,

Programmable Logic Controller (PLC):-

PLC BASED ELEVATOR SUBMITTED BY: - A M A R E N D R A S I ( 1 1 0 3 0 1 E E R 1 2 8 ) D E B A S I S B I S W A L ( 1 1 0 3 0 1 E E R 1 5 3 ) L A G A N A J I T N A Y A K ( 1 1 0 3 0 1 E E R 0 1 7 ) M I T

100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module Memory Number of memory modules (optional)

CPUs CPU 226 6ES7 216-2AD23-0XB0 Supply voltages Rated value 24 V DC Yes Permitted range, lower limit 20.4 V permissible range, upper limit 28.8 V 120 V AC Yes 230 V AC Yes permissible range, lower limit

MECHATRONICS SYSTEM DESIGN

MECHATRONICS SYSTEM DESIGN (MtE-325) TODAYS LECTURE Control systems Open-Loop Control Systems Closed-Loop Control Systems Transfer Functions Analog and Digital Control Systems Controller Configurations

COURSE MODULES LEVEL 3.1 & 3.2

COURSE MODULES LEVEL 3.1 & 3.2 6-Month Internship The six-month internship provides students with the opportunity to apply the knowledge acquired in the classroom to work situations, and demonstrate problem

NATIONAL UNIVERSITY OF SINGAPORE. EE3302/EE3302E Industrial Control Systems. E2: PLC Programming for Sequence Control

NATIONAL UNIVERSITY OF SINGAPORE EE3302/EE3302E Industrial Control Systems E2: 1. Objectives The experiment is designed to provide experience in programming a modern IECcompliant PLC system for sequence

PARKER HANNIFIN TEST STAND

PARKER HANNIFIN TEST STAND Dan Laird Abstract This paper will review a partnership between Parker-Hannifin Mobile Cylinders and Youngstown State University (YSU). The Mobile Cylinders Group makes hydraulic

AMTEC Modules. AMT 102: General PM and Predictive Maintenance AMT 1021: Basic PM AMT 1022: Advanced Technologies

AMT 100: Computer Literacy AMT 1001: Orientation to Computer Systems AMT 1002: Operating Systems AMT 1003: Computer Applications AMT 1004: Internet/Intranet AMT 101: Fluid Power and Electrohydraulics/Pneumatics

MECHATRONICS IN A BOX

MECHATRONICS IN A BOX A Complete Mechatronics Solution for the Classroom amtekcompany.com Contents Introduction Programming Arduino microcontrollers Motor Control Training Course Flowcode 8 Formula AllCode

The modular production system (MPS): an alternate approach for control technology in design and technology

Loughborough University Institutional Repository The modular production system (MPS): an alternate approach for control technology in design and technology This item was submitted to Loughborough University's

Newnes is an imprint of Elsevier 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA Linacre House, Jordan Hill, Oxford OX2 8DP, UK

Newnes is an imprint of Elsevier 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA Linacre House, Jordan Hill, Oxford OX2 8DP, UK Copyright # 2009, Elsevier Ltd. All rights reserved. No part of

CPU 221, CPU 222, CPU 224, CPU 224 XP, CPU 224 XPsi, CPU 226

Siemens AG 2008 SIMATIC S7-200 Overview CPU 226 The high-performance package for complex technical tasks With additional PPI port for added flexibility and communication options With 40 inputs/outputs

Introduction to Function Blocks Creating Function Blocks Ladder Function Blocks Structured Text Function Blocks Using Omron s Function Block Library

OMRON ELECTRONICS PTY LTD INTRODUCTION TO PLCs (2 DAYS) PLC System Components PLC System Configuration PLC Wiring Memory Matrix and Addressing Ladder Diagrams CX-Programmer Overview Program Development

+91-8071802078 Star Automations http://www.servoproducts.in/ We are Manufacturer, Exporter & Service Provider for Industrial Automations & Instrumentations products. Such as servo motor, servo drive, AC

Training Calendar 2018

Training Calendar 2018 Training and seminars from industry - for industry www.festo-didactic.com/in-en Didactic Training for the industry Photo: WorldSkills, Abu Dhabi The relentless competitive pressure

Experienced Worker Assessment Blueprint Industrial Electronics

Blueprint Test Code: 0216 / Version: 01 Written Assessment: Administration Time: 3 hours Number of Questions: 192 Areas Covered: Page 1 of 5 Sample Questions: Decreasing the capacitance value of a capacitor

Programming and Interfacing

AtmelAVR Microcontroller Primer: Programming and Interfacing Second Edition f^r**t>*-**n*c contents Preface xv AtmelAVRArchitecture Overview 1 1.1 ATmegal64 Architecture Overview 1 1.1.1 Reduced Instruction

GTU- Centre of Excellence in Automation

Gujarat Technological University Centre of Excellence in Automation LABS UNDER CENTER OF EXCELLENCE Hydraulic Lab. Pneumatic Lab. Sensor Lab. Programmable logic controller(plc) Robotics & Mechatronics

AUTOMATION. Panel Hub

DG AUTOMATION Panel Hub TABLE OF CONTENTS I. OVERVIEW II. MISSION VISION & OBJECTIVES III. SERVICES A) INDUSTRIAL AUTOMATION SOLUTIONS 1) PLC/SCADA SOLUTIONS 2) POWER MANAGEMENT SOLUTIONS 3) ELECTRICAL

ELECTRICAL DRAWINGS AND CONTROL CIRCUITS

ELECTRICAL DRAWINGS AND CONTROL CIRCUITS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE This training seminar will cover all the aspects with respect to electrical blueprint reading and

Computer Automation in Manufacturing

Computer Automation in Manufacturing Computer Automation in Manufacturing An introduction Thomas O. Boucher Department of Industrial Engineering Rutgers University Piscataway NJ USA SPRINGER-SCIENCE+BUSINESS

Own Your Technology Presents Workshop on

Own Your Technology Presents Workshop on PCB Designing ------------OUR FORTE------------ AERO MODELLING INTERNET OF THINGS EMBEDDED SYSTEMS ROBOTICS MATLAB & MACHINE VISION VLSI & VHDL ANDRIOD APP DEVELOPMENT

INDUSTRIAL AUTOMATION

Department of Technical Education DIPLOMA COURSE IN ELECTRONICS AND COMMUNICATION ENGINEERING 1 SL.No 1 INDUSTRIAL AUTOMATION Subject Title : INDUSTRIAL AUTOMATION Subject Code : EC Hours Per Week : 04

Seminars Automation Academy Denmark

Seminars Automation Academy Denmark Applied Automation Engineer by B&R Denmark Innovating and sustaining advanced production systems requires well-educated, highlytrained employees. Training lays the foundation

Monitoring of Intravenous Drip Rate

Monitoring of Intravenous Drip Rate Vidyadhar V. Kamble, Prem C. Pandey, Chandrashekar P. Gadgil, and Dinesh S. Choudhary Abstract A drip rate meter, for monitoring intravenous infusion, is developed using

Transferring Technical debt to automated Production Systems (aps)

Outline Transferring Technical debt to automated Production Systems (aps) 1. Domain specific constraints 2. Types of Technical Debt 3. Causes of Architectural Technical Debt in aps 4. ATD- Parallel development

Introduction to PLCs

Introduction to PLCs Introduction to PLCs Jay F. Hooper Carolina Academic Press Durham, North Carolina Copyright 2005 Jay F. Hooper All Rights Reserved Library of Congress Cataloging-in-Publication Data

A New Glass-Ceramics for Tile-Glaze Application using PID Controller

A New Glass-Ceramics for Tile-Glaze Application using PID Controller Benchalak Muangmeesri Faculty of Industrial Technology Valaya Alongkorn Rajabhat University, Thailand Abstract: Glazes can be defined

Star Automations.

+91-8048600392 Star Automations https://www.automationcontrolandproject.com/ We are the trusted business entities engaged in rendering repairing services for industrial electronics. The services are acknowledged

ECE 511: MICROPROCESSORS

ECE 511: MICROPROCESSORS A project report on SNIFFING DOG Under the guidance of Prof. Jens Peter Kaps By, Preethi Santhanam (G00767634) Ranjit Mandavalli (G00819673) Shaswath Raghavan (G00776950) Swathi

FANUC Collaborative Robot Technology and GM Applications

FANUC Collaborative Robot Technology and GM Applications Greg Buell Fanuc America Chris Ihrke General Motors Spare Tire Application Perennial ergonomic and safety concern Productivity issue Wanted a low

Design of Automatic 70T Oil Quenching Hydraulic Machine

Design of Automatic 70T Oil Quenching Hydraulic Machine S.Menaga #1, K.Vignesh Kumar *2, M.A.Sandeep Kumar #3, P.Tamilarasan *4, T.Surya #5 Assistant Professor, Department of Electronics and Communication

ROBOTICS & IOT. Workshop Module

ROBOTICS & IOT Workshop Module CURRICULUM STRUCTURE DURATION : 2 day (16 hours) Session 1 Let's Learn Embedded System & Robotics Description Under this topic, we will discuss basics and give brief idea

ROBOTICS & IOT. Workshop Module

ROBOTICS & IOT Workshop Module CURRICULUM STRUCTURE DURATION : 2 day (16 hours) Session 1 Let's Learn Embedded System & Robotics Description Under this topic, we will discuss basics and give brief idea

Electrical Controls. Isaac Queen

Electrical Controls Isaac Queen iqueen@atn.org www.atn.org 1 Contact blocks include normally open (NO), normally closed (NC), or both NO and NC contacts. 2 A joystick is used to control many different

Micro System SIMATIC S Two Hour Primer Edition 01/2000

s Micro System SIMATIC S7-200 Two Hour Primer Edition 01/2000 Safety Guidelines The Two Hour Primer was created as a quick introduction to the world of S7-200 and has deliberately been kept short. It is

Eaton Experience Center Training Calendar

Eaton Experience Center Training Calendar Effective: December 2017, Version 1.0 2017 by Eaton Industries GmbH Seminar registration form (please fill out clearly) Seminar name, e.g., easysoft Basics Seminar

International Journal of Advance Engineering and Research Development. PLC Based Fully Automated Railway System

Scientific Journal of Impact Factor (SJIF): 4.72 International Journal of Advance Engineering and Research Development Volume 4, Issue 6, June -2017 PLC Based Fully Automated Railway System e-issn (O):

Ndrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input

Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety

OMRON APPLICATION NOTE

OMRON APPLICATION NOTE Automatic PID Selection for E5_N-H and E5_N-HT Temperature Controllers This document explains: Parameters used for automatic PID selection Provides application examples using Analog

ME 4447 / ME 6405 MICROPROCESSOR CONTROL OF MANUFACTURING SYSTEMS / INTRODUCTION TO MECHATRONICS

ME 4447 / ME 6405 MICROPROCESSOR CONTROL OF MANUFACTURING SYSTEMS / INTRODUCTION TO MECHATRONICS Instructor: Professor I. Charles Ume Phone: 404-894-7411 Office: MARC Building, Room 453 Office Hours: Wednesday

International Journal of Modern Trends in Engineering and Research e-issn No.: , Date: April, 2016

International Journal of Modern Trends in Engineering and Research www.ijmter.com e-issn No.:2349-9745, Date: 28-30 April, 2016 MATLAB CONTROLLING COLOUR SENSING ROBOT Dhiraj S.Dhondage 1,Kiran N.Nikam

UPON ACHIEVEMENT OF THE USUAL FUNCTIONS OF TIME WITH PS-3 PLC KLÖCKNER- MOELLER

UPON ACHIEVEMENT OF THE USUAL FUNCTIONS OF TIME WITH PS-3 PLC KLÖCKNER- MOELLER Iosif Popa, Assoc. Prof. PhD. Eng., Faculty of Engineering Hunedoara, Politehnica University Timişoara Gabriel Nicolae Popa,,

Unit-6 PROGRAMMABLE INTERRUPT CONTROLLERS 8259A-PROGRAMMABLE INTERRUPT CONTROLLER (PIC) INTRODUCTION

M i c r o p r o c e s s o r s a n d M i c r o c o n t r o l l e r s P a g e 1 PROGRAMMABLE INTERRUPT CONTROLLERS 8259A-PROGRAMMABLE INTERRUPT CONTROLLER (PIC) INTRODUCTION Microcomputer system design requires

Department of Instrumentation and Control Engineering. SE Instrumentation & Control Subject: Sensors & Transducers-I

Pravara Rural Education Society`s PRAVARA RURAL ENGINEERING COLLEGE, LONI A/p: Loni, Tal: Rahata, Dist:Ahmednagar (M.S.), Pin. 413736. Phone: 02422-273459, 273539 Fax:02422-273537 Department of Instrumentation

Introduction to Real-Time Systems

Introduction to Real-Time Systems Real-Time Systems, Lecture 1 Martina Maggio and Karl-Erik Årzén 16 January 2018 Lund University, Department of Automatic Control Content [Real-Time Control System: Chapter

Project Superfinish. Full-Production Superfinishing Machine ELECOMP Capstone Design Project

Project Superfinish Full-Production Superfinishing Machine ELECOMP Capstone Design Project 2018-2019 Sponsoring Company Supfina Machine Company, Inc. 181 Circuit Drive, North Kingstown RI 02852 Phone:

Utility and Energy Systems Program

Utility and Energy Systems Program Electrical Technology Associate in Applied Science Degree Electrical Technology, Construction Electrical Utility/Lineworker Electrical Tech. Control/Maintenance Electrical

EXPERIMENT NO. 4 EXPERIMENTS ON LADDER PROGRAMMING FOR MECHATRONICS SYSTEM

EXPERIMENT NO. 4 EXPERIMENTS ON LADDER PROGRAMMING FOR MECHATRONICS SYSTEM DATE OF PERFORMANCE : INTRODUCTION: A Programmable Logic Controller, or PLC, is more or less a small computer with a built-in

PRACTICAL IMPLEMENTATION OF FUZZY CONTROLLER FOR CONTROLLING THE CNC SPINDLE MOTOR USING PLC

١٨٠ motor using PLC, pp. 1٨٠-198 PRACTICAL IMPLEMENTATION OF FUZZY CONTROLLER FOR CONTROLLING THE CNC SPINDLE MOTOR USING PLC O. Awida 1, *, M. El-Bardini 2, and N. El-Rabaie 3 Electrical engineer in 10

National Symposium on Chemical Engineering for Rural Development

A Study Exposure Visit Report National Symposium on Chemical Engineering for Rural Development 8 th - 9 th March 2014 Venue: IIT Bombay, Mumbai Submitted by Khodidas Kheraliya Krishna Kiritbhai Dave Nikhil

Report of Two Days Workshop on Modern Digital Design held on 3rd and 4th Dec 2012 at LJIT, Ahmedabad with the Technical help from IIT, Bombay

Report of held on 3rd and 4th Dec 2012 at LJIT, Ahmedabad with the Technical help from IIT, Bombay The two days workshop on Modern Digital Design was organized by Gujarat Technological University, Ahmedabad

MONITORING OF DISTRIBUTION TRANSFORMER PARAMETERS USING PLC

MONITORING OF DISTRIBUTION TRANSFORMER PARAMETERS USING PLC Shubhangi Landge¹, Snehal Waydande², Sanjay Sangale³, Somesh Gaikwad⁴ ¹Assistant Professor, Dept. Of Electrical Engineering, AISSMS IOIT College,

EdgeFX Hi-Tech Innovation, Design and Hardware Prototyping, Entrepreneurship Lab For Universities / Colleges

EdgeFX Hi-Tech Innovation, Design and Hardware Prototyping, Entrepreneurship Lab For Universities / Colleges in Electronics (Including General Electronics, Instrumentation, Sensors) Robotics Electrical

Robotics Projects at NAIT. David Carpenter PhD.

Robotics Projects at NAIT David Carpenter PhD. Introduction and background NAIT- Largest Polytechnic in Western Canada As a Polytechnic: Programs include degree, diploma, certificates and apprenticeship

Microprocessor & Interfacing Lecture Programmable Interval Timer

Microprocessor & Interfacing Lecture 30 8254 Programmable Interval Timer P A R U L B A N S A L A S S T P R O F E S S O R E C S D E P A R T M E N T D R O N A C H A R Y A C O L L E G E O F E N G I N E E

Teciam. Part C. Virtual Mechatronics

Teciam Part C Teciam > Fundamentals > Contents Table of Contents Introduction Introduction... C-3 Conceptualisation Conceptualisation... C-3 Diversified Contents Diversified Contents... C-4 Technology

PLC-K506 Series FEATURES DESCRIPTION FEATURES

FEATURES Two High Speed Counters Two Pulse Train Outputs Two Pulse Width Modulation Outputs Inputs 10 Outputs 1 RS232 Port 2 RS485 Ports Supports Modbus RTU Protocol Communicate With Up to 32 Devices DESCRIPTION

PLC BASED RAILWAY LEVEL CROSSING GATE CONTROL

PLC BASED RAILWAY LEVEL CROSSING GATE CONTROL R.Gopinathan *1 and B.Sivashankar #2 * Assistant professor, Mechatronics, SNS College of Technology, Coimbatore,India. # UG scholar, Mechatronics, SNS College

Position Control Units

SYSMAC CS1 Position Control Units CS1W-NC113/NC133/NC213/NC233/NC413/NC433 A Shorter Scan Time Means Faster Control Syst Control for 1, 2, or 4 Axes with Compact, Single-slot Units A Complete Selection

CIS009-2, Mechatronics Signals & Motors

CIS009-2, Signals & Motors Bedfordshire 13 th December 2012 Outline 1 2 3 4 5 6 7 8 3 Signals Two types of signals exist: 4 Bedfordshire 52 Analogue signal In an analogue signal voltages and currents continuously

Fundamentals of Industrial Control

Fundamentals of Industrial Control 2nd Edition D. A. Coggan, Editor Practical Guides for Measurement and Control Preface ix Contributors xi Chapter 1 Sensors 1 Applications of Instrumentation 1 Introduction

(VE2: Verilog HDL) Software Development & Education Center

Software Development & Education Center (VE2: Verilog HDL) VLSI Designing & Integration Introduction VLSI: With the hardware market booming with the rise demand in chip driven products in consumer electronics,

FACULTY DEVELOPMENT PROGRAM

FACULTY DEVELOPMENT PROGRAM COVER LETTER Submitted by: - E2MATRIX in collaboration with CT group of Institutions (An ISO 9001:2008 Certified Company) Join hands for long relations because trust matter

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit Number- 8411894 -Superclass- CA -Title- MICROCONTROLLERS: ARCHITECTURE, PROGRAMMING AND APPLICATIONS

ONE DAY ONLINE FACULTY DEVELOPMENT PROGRAM REPORT ON APPLICATION AWARENESS ON AUTOMATION STUDIO SOFTWARE TOOL. 25 th June 2018 Held at

ONE DAY ONLINE FACULTY DEVELOPMENT PROGRAM REPORT ON APPLICATION AWARENESS ON AUTOMATION STUDIO SOFTWARE TOOL 25 th June 2018 Held at ACS COLLEGE OF ENGINEERING Bengaluru Supported by INDIASOFT TECHNOLOGIES

Training and Consulting Range of courses for 2014

Training and Consulting Range of courses for 2014 South Africa www.festo-didactic.com Foreword Knowledge is Power Brett Wallace, Deputy Managing Director of Festo South Africa The Latin aphorism scientia

FM HIGH-SPEED BOOLEAN PROCESSOR

FM 352-5 HIGH-SPEED BOOLEAN PROCESSOR Function Instruction set: Bit instructions: NO operators, NC operators, negation, output, connector, RS flipflop, SR memory, recording of positive/negative signal

S7-200 SMART Programmable controller Answers for industry.

s SIMATIC S7-200 SMART S7-200 SMART Programmable controller Answers for industry. Siemens is synonymous with innovation, especially in the domain of industrial automation. Committed to R&D, promotion and

KNC-PLC-K506 Series FEATURES DESCRIPTION FEATURES

FEATURES Two High Speed Counters Two Pulse Train Outputs Two Pulse Width Modulation Outputs Inputs 10 Outputs 1 RS232 Port 2 RS485 Ports Supports Modbus RTU Protocol Communicate with up to 32 devices DESCRIPTION

Advance Automation & Electronics (AAE)

Advance Automation & Electronics (AAE) Advance Automation & Electronics (AAE) is an Industrial Control Automation company and one of the leading Training providers in PLCs, AC/VFD Drives, Motor Control

Eng: Mohamed Alsayed. Personal Information: Qualifications:

Eng: Mohamed Alsayed Personal Information: Name Mohamed Alsayed Ahmed Ismail Nationality Egyptian Sex Male Address 13 RAEL St MANSHIA AIN-Helwan Egypt E. mail MasterHelwan@yahoo.com Phone (002) 010 9184487

An Autonomous Self- Propelled Robot Designed for Obstacle Avoidance and Fire Fighting

An Autonomous Self- Propelled Robot Designed for Obstacle Avoidance and Fire Fighting K. Prathyusha Assistant professor, Department of ECE, NRI Institute of Technology, Agiripalli Mandal, Krishna District,

Lecture 2: Embedded Systems: An Introduction

Design & Co-design of Embedded Systems Lecture 2: Embedded Systems: An Introduction Adapted from ECE456 course notes, University of California (Riverside), and EE412 course notes, Princeton University

Computer-Aided Manufacturing

Computer-Aided Manufacturing Third Edition Tien-Chien Chang, Richard A. Wysk, and Hsu-Pin (Ben) Wang PEARSON Prentice Hall Upper Saddle River, New Jersey 07458 Contents Chapter 1 Introduction to Manufacturing

PLC BASED ELEVATOR SYSTEM WITH COLOR SENSING CAPABILITIES IN INDUSTRIAL APPLICATIONS

Proceeding of NCRIET-2015 & Indian J.Sci.Res. 12(1):186-191, 2015 ISSN: 0976-2876 (Print) ISSN: 2250-0138 (Online) PLC BASED ELEVATOR SYSTEM WITH COLOR SENSING CAPABILITIES IN INDUSTRIAL APPLICATIONS ZEBA

Functional safety for semiconductor IP

Functional safety for semiconductor IP Lauri Ora Functional Safety Manager, CPU Group NMI ISO 26262 Practitioner s Workshop January 20 th, 2016, Nuneaton Intellectual property supplier s point of view

Bachelor of Science in Electrical Engineering Freshman Year

Bachelor of Science in Electrical Engineering 2016-17 Freshman Year CHEM 1011 General Chemistry I Lab 1 ENG 1013 Composition II 3 CHEM 1013 General Chemistry I 3 ENGR 1412 Software Applications for Engineers