FM11NC08 NFC Channel Chip
|
|
|
- Rosalyn Weaver
- 5 years ago
- Views:
Transcription
1 FM11NC08 NFC Channel Chip FM11NC08 NFC Channel Chip Ver1.0 1
2 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCT BEST SUITED TO THE CUSTOMER'S APPLICATION; THEY DO NOT CONVEY ANY LICENSE UNDER ANY INTELLECTUAL PROPERTY RIGHTS, OR ANY OTHER RIGHTS, BELONGING TO SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD OR A THIRD PARTY. WHEN USING THE INFORMATION CONTAINED IN THIS DOCUMENTS, PLEASE BE SURE TO EVALUATE ALL INFORMATION AS A TOTAL SYSTEM BEFORE MAKING A FINAL DECISION ON THE APPLICABILITY OF THE INFORMATION AND PRODUCTS. PURCHASERS ARE SOLELY RESPONSIBLE FOR THE CHOICE, SELECTION AND USE OF THE SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS AND SERVICES DESCRIBED HEREIN, AND SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD ASSUMES NO LIABILITY WHATSOEVER RELATING TO THE CHOICE, SELECTION OR USE OF THE SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS AND SERVICES DESCRIBED HEREIN. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD REPRESENTATIVE, SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. FUTURE ROUTINE REVISIONS WILL OCCUR WHEN APPROPRIATE, WITHOUT NOTICE. CONTACT SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD SALES OFFICE TO OBTAIN THE LATEST SPECIFICATIONS AND BEFORE PLACING YOUR PRODUCT ORDER. PLEASE ALSO PAY ATTENTION TO INFORMATION PUBLISHED BY SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD BY VARIOUS MEANS, INCLUDING SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD HOME PAGE ( PLEASE CONTACT SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD LOCAL SALES OFFICE FOR THE SPECIFICATION REGARDING THE INFORMATION IN THIS DOCUMENT OR SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS. Trademarks Shanghai Fudan Microelectronics Group Co., Ltd name and logo, the 复旦 logo are trademarks or registered trademarks of Shanghai Fudan Microelectronics Group Co., Ltd or its subsidiaries in China. Shanghai Fudan Microelectronics Group Co., Ltd, Printed in the China, All Rights Reserved. FM11NC08 NFC Channel Chip Ver1.0 2
3 Contents CONTENTS PRODUCT OVERVIEW INTRODUCTION FEATURES BLOCK DIAGRAM PINNING INFORMATION DFN10 Pinning Assignment(Top View) for FM11NC08S Pin description for FM11NC08S DFN10 Pinning Assignment(Top View) for FM11NC08I Pin description for FM11NC08S ORDERING INFORMATION PACKAGE OUTLINE DFN REVISION HISTORY... 9 SALES AND SERVICE FM11NC08 NFC Channel Chip Ver1.0 3
4 1 Product Overview 1.1 Introduction The FM11NC08 is an ISO/IEC14443-A compliant NFC channel chip designed by Shanghai Fudan Microelectronics, which contains two sub-types: FM11NC08S with SPI interface and FM11NC08I with I2C interface. Works as NFC interface to offer contactless communication ability for regular MCU. Embedded with 8K bits EEPROM to support non-real-time data exchange between MCU and NFC devices. Energy Harvesting ability to harvest energy from RF field for non-battery applications such as sensor-networks or some low power applications. NFC FORUM Type4 Tag function emulation with MCU in other devices. 1.2 Features ISO/IEC14443-A compatible 8K bits EEPROM, 7200bits available for user application 3 data exchange mode: Level3, Level4 or AFE transparent 7 bytes UID, anti-collision cascade level 2 Supported RF data rates: 106K, 212K, 424K, 848K 16bit CRC for data integrity On-chip 50pF resonant capacitor Zero standby power consumption for contact interface Wide Operating voltage range for contact interface Contact interface: SPI or I2C Max data rate for I2C: 1Mbps Max data rate for SPI: 10Mbps Configurable interrupt output 32 bytes FIFO Energy harvesting supported with configurable output voltage FM11NC08 NFC Channel Chip Ver1.0 4
5 1.3 Block diagram IN1 Clock Controller SDA/MOSI SCL/SCLK IN2 AFE Miller Decoder Anticollision Engine Protocol Processing Engine FIFO CT Controller I2C SPI CSN/SSN IRQ_N DEM_CLK/ MISO GND Manchester/BPSK Coder Mode Diag VCC Power Managerment EE Interface Reset LDO EEPROM VOUT LDO_CFG RingOSC Figure 1-1 FM11NC08 Block Diagram 1.4 Pinning information DFN10 Pinning Assignment(Top View) for FM11NC08S VCC 1 10 IRQ_N VOUT 2 9 MISO IN1 3 8 MOSI IN2 4 7 SCLK GND 5 6 SSN Pin description for FM11NC08S Figure 1-2 FM11NC08S DFN10 Pinning assignment Pin No. Pin Name Type Description 1 VCC PWR contact interface power supply 2 VOUT ANA regulated voltage output for energy harvesting FM11NC08 NFC Channel Chip Ver1.0 5
6 Pin No. Pin Name Type Description 3 IN1 ANA RF antenna pin 4 IN2 ANA RF antenna pin 5 GND GND chip ground 6 SSN DI SPI chip-selection, low-effective 7 SCLK DI SPI clock input 8 MOSI DIO 9 MISO DO SPI slave data input, RF backscatter data input under AFE transparent mode SPI slave data ouput, RF recovery clock output under AFE transparent mode interrupt output, low-effective. RF demodulated data 10 IRQ_N OD output under AFE transparent mode Table 1-1 FM11NC08S DFN10 PIN description DFN10 Pinning Assignment(Top View) for FM11NC08I VCC 1 10 IRQ_N VOUT 2 9 DEM CLK IN1 3 8 SDA IN2 4 7 SCL GND 5 6 CSN Pin description for FM11NC08S Figure 1-3 FM11NC08I DFN10 Pinning assignment Pin No. Pin Name Type Description 1 VCC PWR contact interface power supply 2 VOUT ANA regulated voltage output for energy harvesting 3 IN1 ANA RF antenna pin 4 IN2 ANA RF antenna pin 5 GND GND chip ground 6 CSN DI I2C chip-selection, low-effective 7 SCL DI I2C clock input 8 SDA DIO I2C data, RF backscatter data input under AFE transparent mode 9 DEMCLK DO RF recovery clock output under AFE transparent mode, high-z for other modes 10 IRQ_N OD interrupt output, low-effective. RF demodulated data output under AFE transparent mode Table 1-2 FM11NC08I DFN10 PIN description FM11NC08 NFC Channel Chip Ver1.0 6
7 2 Ordering information Device number Package Name Packing FM11NC08S-DN-T-G DFN10 Tape and Reel FM 11NC 08 S -XXX -C -H Company name prefix FM=Shanghai Fudan Microelectronics Product family 11NC=NFC Channel compliant to ISO/IEC14443 Product Memory 08=approximate 8k bits EEPROM Product version S=SPI I=I2C Package DN=DFN10 Wrap T= Tape and Reel U= Tube HSF code G=ROHS Compliant, Halogen-free, Antimony-free FM11NC08 NFC Channel Chip Ver1.0 7
8 3 Package outline 3.1 DFN10 Figure 3-1 FM11NC08 DFN10 Outline FM11NC08 NFC Channel Chip Ver1.0 8
9 Revision history Version Publication date Pages Paragraph or Illustration 1.0 Feb Initial Release. Revise Description FM11NC08 NFC Channel Chip Ver1.0 9
10 Sales and Service Shanghai Fudan Microelectronics Group Co., Ltd. Address: Bldg No. 4, 127 Guotai Rd, Shanghai City China. Postcode: Tel: (86-021) Fax: (86-021) Shanghai Fudan Microelectronics (HK) Co., Ltd. Address: Unit 506, 5/F., East Ocean Centre, 98 Granville Road, Tsimshatsui East, Kowloon, Hong Kong Tel: (852) Fax: (852) Beijing Office Address: Room 423, Bldg B, Gehua Building, 1 QingLong Hutong, Dongzhimen Alley north Street, Dongcheng District, Beijing City, China. Postcode: Tel: (86-010) Fax: (86-010) Shenzhen Office Address: Room.1301, Century Bldg, No. 4002, Shengtingyuan Hotel, Huaqiang Rd (North), Shenzhen City, China. Postcode: Tel: ( ) Fax: ( ) Shanghai Fudan Microelectronics (HK) Ltd Taiwan Representative Office Address: Unit 1225, 12F., No 252, Sec.1 Neihu Rd., Neihu Dist., Taipei City 114, Taiwan Tel : (886-2) Fax: (886-2) Shanghai Fudan Microelectronics (HK) Ltd Singapore Representative Office Address : 237, Alexandra Road, #07-01 The Alexcier, Singapore Tel : (65) Fax: (65) Shanghai Fudan Microelectronics Group Co., Ltd NA Office Address :2490 W. Ray Road Suite#2 Chandler, AZ USA Tel : (480) ext 18 Web Site: FM11NC08 NFC Channel Chip Ver1.0 10
VG54123A CMOS Leakage current protector chip
VG54123A CM Leakage current protector chip Aug. 2012 VG54123A CM Leakage current protector chip 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI
FM2145 Low Power Ground Fault Interrupter
FM2145 Low Power Ground Fault Interrupter May. 2008 FM 2145 Low power Ground Fault Interrupter Ver 2.1 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION
FM2140 Low Power Two-Wire Ground Fault Interrupter
FM2140 Low Power Two-Wire Ground Fault Interrupter May. 2008 FM2140 Low power Two-Wire Ground Fault Interrupter Ver2.1 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS
FM17XX Serial Contactless Readers ICS
FM17XX Serial Contactless Readers ICS May. 2012 FM17 Serial Contactless Reader ICS Ver 1.1 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI
AN1954 APPLICATION NOTE
AN1954 APPLICATION NOTE How to Extend the Operating Range of the CRX14 Contactless Coupler Chip This Application Note describes how to extend the operating range of the CRX14 Contactless Coupler Chip,
AN Energy Harvesting with the NTAG I²C and NTAG I²C plus. Application note COMPANY PUBLIC. Rev February Document information
Rev. 1.0 1 February 2016 Application note COMPANY PUBLIC Document information Info Content Keywords NTAG I²C, NTAG I²C plus, Energy Harvesting Abstract Show influencing factors and optimization for energy
Battery-powered Equipment Laptop, Palmtops, Notebook Computers Portable Information Appliances SOT25 (WR Package)
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
Obsolete Product(s) - Obsolete Product(s)
Low power single inverter gate Features High speed: t PD = 4.3 ns (max.) at V CC = 2.3 V Power down protection on inputs and outputs Balanced propagation delays: t PLH t PHL Operating voltage range: V
TDA7478. Single chip RDS demodulator. Features. Description
Single chip RDS demodulator Features Very high RDS demodulation quality with improved digital signal processing High performance, 57 khz bandpass filter (8th order) Filter adjustment free and without external
Obsolete Product(s) - Obsolete Product(s)
Low drop - Low supply voltage Low ESR capacitor compatible Feature summary Input voltage from 1.7 to 3.6V Ultra low dropout voltage (130mV typ. at 300mA load) Very low quiescent current (110µA typ. at
STLC4560. Single chip b/g WLAN radio. Features. Description. Applications
Single chip 802.11b/g WLAN radio Data Brief Features Extremely small footprint Ultra low power consumption Fully compliant with the IEEE 802.11b and 802.11g WLAN standards Support for 54, 48, 36, 24, 18,
Obsolete Product(s) - Obsolete Product(s)
1-bit dual supply bus buffer level translator with A-side series resistor Features High speed: t PD = 4.4ns (Max.) at T A = 85 C V CCB = 1.65V; V CCA = 3.0V Low power dissipation: I CCA = I CCB = 5µA(Max.)
DRF1278F 20dBm LoRa Long Range RF Front-end Module V1.11
20dBm LoRa Long Range RF Front-end Module V1.11 Features: Frequency Range: 433MHz Modulation: FSK/GFSK/MSK/LoRa SPI Data Interface Sensitivity: -139dBm Output Power: +20dBm Data Rate:
FM17XX Serial Contactless Readers ICS
F7XX Serial Contactless Readers ICS May. 2008 F7 Serial Contactless Reader ICS Ver 0.3 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF ANGHAI FUDAN
STCL1100 STCL1120 STCL1160
High frequency silicon oscillator family Features Fixed frequency 10/12/16 MHz ±1.5% frequency accuracy over all conditions 5 V ±10% operation Low operating current, ultra low standby current Push-pull,
Obsolete Product(s) - Obsolete Product(s)
Single buffer/driver with open drain Features 5 V tolerant inputs High speed: t PD = 4.2 ns (max.) at V CC = 3.3 V Low power dissipation: I CC =1μA (max.) at T A =25 C Power down protection on inputs and
AP7384. Description. Pin Assignments. Features NEW PRODUCT. Applications. Typical Applications Circuit. WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR
WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
AH1812. Description. Pin Assignments NEW PRODUCT. Applications. Features. Typical Applications Circuit (Note 4) OUTPUT V DD GND 2
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable
AN NFC, PN533, demo board. Application note COMPANY PUBLIC. Rev July Document information
Rev. 2.1 10 July 2018 Document information Info Keywords Abstract Content NFC, PN533, demo board This document describes the. Revision history Rev Date Description 2.1. 20180710 Editorial changes 2.0 20171031
LoRa1276 Catalogue
Catalogue 1. Overview... 3 2. Features... 3 3. Applications... 3 4. Electrical Characteristics... 4 5. Schematic... 5 6. Speed rate correlation table... 6 7. Pin definition... 6 8. Accessories... 8 9.
LDS3985xx. Ultra low drop-low noise BiCMOS 300 ma voltage regulator for use with very low ESR output capacitor. Features.
Ultra low drop-low noise BiCMOS 300 ma voltage regulator for use with very low ESR output capacitor Features Input voltage from 2.5 V to 6 V Stable with low ESR ceramic capacitors Ultra low dropout voltage
LK115XX30 LK115XX33 - LK115XX50
LK115XX30 LK115XX33 - LK115XX50 ery low drop with inhibit voltage regulators Features ery low dropout voltage (0.2 typ.) ery low quiescent current (Typ. 0.01 µa in off mode, 280 µa in on mode) Output current
Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Datasheet production data Features Extremely low supply current: 9 μa typ./comp. Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely
UM0791 User manual. Demonstration firmware for the DMX-512 communication protocol receiver based on the STM32F103Zx. Introduction
User manual Demonstration firmware for the DMX-512 communication protocol receiver based on the STM32F103Zx Introduction This document describes how to use the demonstration firmware for the DMX-512 communication
DPIULC6. ESD protection for internal DisplayPort. Features. Description. Complies with the following standards
ESD protection for internal DisplayPort Features Compliant with DisplayPort 1.1a IEC 61000-4-2 level 4 compliant Ultralarge bandwidth (> 5 GHz) Low capacitance variation: 0.05 pf 100 Ω ± 10% differential
AP4340S. Description. Pin Assignments NEW PRODUCT. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
DYNAMIC PSR ACCELERATOR Description Pin Assignments The is an output voltage detector for Primary Side Control System. It is a low power loss solution. It detects the output voltage and provides a periodical
STEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description
High-side current-sense amplifier demonstration board based on the TSC102 Data brief Features Independent supply and input common-mode voltages Wide common-mode operating range: 2.8 V to 30 V Wide common-mode
ESDALCL6-4P6A. Multi-line low capacitance and low leakage current ESD protection. Features. Applications. Description
Multi-line low capacitance and low leakage current ESD protection Features Datasheet production data Diode array topology: 4 lines protection Low leakage current: 10 na at 3 V 1 na at 1 V Very low diode
(Top View) operation modes for setting the output voltage. Fixed output voltage mode senses the output voltage on V OUT, adjustable output voltage
300mA HIGH SPEED, EXTREMELY LOW NOISE CMOS LDO REGULATOR Description Pin Assignments The is a 300mA, positive Voltage regulator ICs fabricated by CMOS process. The provides two kinds of output voltage
EMIF03-SIM05F3. EMI filter with SWP protection for SIM interface. Features. Application. Description. Complies with the following standards:
EMIF0-SIM05F EMI filter with SWP protection for SIM interface Datasheet production data Features Lead-free package Very low PCB space consumption Very thin package: < 0.55 mm after reflow High efficiency
Catalogue
Catalogue 1. Overview... - 3-2. Features... - 3-3. Applications...- 3-4. Electrical Characteristics...- 4-5. Schematic... - 4-6. Speed rate correlation table...- 6-7. Pin definition...- 6-8. Accessories...-
SENSYLINK Microelectronics Co., LTD. (CT1720) Single-Wire Digital Temperature Sensor
SENSYLINK Microelectronics (CT1720) Single-Wire Digital Temperature Sensor CT1720 is a Low Cost Digital Temperature Sensor with±1.0 C Accuracy over 0 C to 50 C with S-Wire Interface. It is ideally used
KF25B, KF33B KF50B, KF80B
KF25B, KF33B KF50B, KF80B Very low drop voltage regulators with inhibit Datasheet production data Features Very low dropout voltage (0.4 V) Very low quiescent current (typ. 50 µa in OFF mode, 500 µa in
Obsolete Product(s) - Obsolete Product(s)
High bandwidth analog switch with 16-to-8 bit MUX/DEMUX Features Low R ON : 5.5 Ω typical V CC operating range: 3.0 to 3.6 V Low current consumption: 20 µa ESD HBM model: > 2 kv Channel on capacitance:
LM2903H. Low-power dual voltage comparator. Features. Description
LM23H Low-power dual voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent
ESDARF03-1BF3. Ultralow capacitance ESD protection for antenna. Features. Applications. Description. Benefits. Complies with the following standards
Ultralow capacitance ESD protection for antenna Features ultralow diode capacitance 0.6 pf Single line, protected against 15 kv ESD breakdown voltage V BR = 6.0 V min. Flip Chip 400 µm pitch, lead-free
STCL1100 STCL1120 STCL1160
High frequency silicon oscillator family Not recommended for new design Features Fixed frequency 10/12/16 MHz ±1.5% frequency accuracy over all conditions 5 V ±10% operation Low operating current, ultra
AP4305. Description. Pin Assignments. Features. Applications. Typical Applications Circuit AP4305. A Product Line of. Diodes Incorporated
CONSTANT OLTAGE AND CONSTANT CURRENT CONTROLLER Description Pin Assignments The is a highly integrated solution for a constant voltage/constant current mode SMPS application. (Top iew) The contains one
TS3704. Micropower quad CMOS voltage comparators. Features. Description
Micropower quad CMOS voltage comparators Features Push-pull CMOS output (no external pull-up resistor required) Extremely low supply current: 9μa typ per comparator Wide single supply range 2.7V to 6V
NTAG General description. NFC Forum Type 2 Tag compliant IC with 144 bytes user memory. 1.1 Contactless energy and data transfer
NFC Forum Type 2 Tag compliant IC with 144 bytes user memory 218632 1. General description NXP Semiconductors has developed - NFC Forum Type 2 Tag compliant IC - to be used with NFC enabled devices according
Order codes Package Packaging
Low voltage, low current power 8-bit shift register Features Low voltage power supply down to 3 V 8 constant current output channels Adjustable output current through external resistor Serial data IN/parallel
Applications AP7350 GND
150mA ULTRA-LOW QUIESCENT CURRENT LDO with ENABLE Description The is a low dropout regulator with high output voltage accuracy. The includes a voltage reference, error amplifier, current limit circuit
ACPL Data Sheet. Three-Channel Digital Filter for Sigma-Delta Modulators. Description. Features. Specifications.
Data Sheet ACPL-0873 Three-Channel Digital Filter for Sigma-Delta Modulators Description The ACPL-0873 is a 3-channel digital filter designed specifically for Second Order Sigma-Delta Modulators in voltage
AP4310A. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
DUAL OP AMP AND VOLTAGE REFERENCE Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies Pin Assignments
Order code Temperature range Package Packaging
Low power high speed RS-485/RS-422 transceiver Features Low supply current: 5 ma max -7 V to 12 V common mode input voltage range 70 mv typical input hysteresis Designed for 25 Mbps operation Operate from
AP2132. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated 2A CMOS LDO REGULATOR AP2132.
2A CMOS LDO REGULATOR Description Pin Assignments The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor,
Obsolete Product(s) - Obsolete Product(s)
Low voltage 16-Bit, constant current LED sink driver Features Low voltage power supply down to 3V 16 constant current output channels Adjustable output current through external resistor Serial data IN/parallel
AN3134 Application note
Application note EVAL6229QR demonstration board using the L6229Q DMOS driver for a three-phase BLDC motor control application Introduction This application note describes the EVAL6229QR demonstration board
Obsolete Product(s) - Obsolete Product(s)
Features STEVAL-ISVV W dual stage DC-AC converter demonstration board based on the STPNF Nominal input voltage: V Output voltage: Vrms, Hz Output power: kw Efficiency: % Switching frequency: khz (DC-DC);
L4949E. Multifunction very low drop voltage regulator. Features. Description
Multifunction very low drop voltage regulator Features Operating DC supply voltage range 5 V - 28 V Transient supply voltage up to 40V Extremely low quiescent current in standby mode High precision standby
LD3985xx. Ultra low drop-low noise BiCMOS voltage regulators low ESR capacitors compatible. Features. Description
Ultra low drop-low noise BiCMOS voltage regulators low ESR capacitors compatible Features Input voltage from 2.5 V to 6 V Stable with low ESR ceramic capacitors Ultra low dropout voltage (100 mv typ. at
Obsolete Product(s) - Obsolete Product(s)
N-channel 30V - 0.020Ω - 6A - TSSOP8 2.5V-drive STripFET II Power MOSFET General features Type V DSS R DS(on) I D 30V < 0.025 Ω (@ 4.5 V) < 0.030 Ω (@ 2.7 V) 6A Ultra low threshold gate drive (2.5V) Standard
AN3360 Application note
Application note 3.2 W LED power supply based on HVLED805 Introduction This application note describes the demonstration board of the all-primary sensing switching regulator HVLED805 and presents the results
CPL-WB-00C2. Wide band directional coupler with ISO port. Features. Applications. Description. Benefits
Wide band directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range (824 MHz to 2170 MHz) Low Insertion Loss (< 0.2 db) 34 db typical coupling factor
STEVAL-CCA040V1. 4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN. Features. Description
4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN Features High output-power capability: 4x10 W / 4 Ω at 17 V, 1 KHz, THD = 10% 2x26 W / 4 Ω at 14.4 V, 1 KHz, THD = 10% 2x15
AS339/339A. Description. Pin Assignments. Features. Applications LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS AS339/339A
LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS Description Pin Assignments The consist of four independent precision voltage comparators with a typical offset voltage of 2.0mV and high gain. They are specifically
AP4320. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
CONSTANT OLTAGE AND CONSTANT CURRENT CONTROLLER Description The is a highly integrated solution for a constant voltage/constant current mode SMPS application. Pin Assignments (Top iew) The contains one.
TS391. Low-power single voltage comparator. Features. Description
Low-power single voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.2 ma) independent of supply
STCL132K. 32,768 Hz silicon oscillator. Features. Applications. Description
32,768 Hz silicon oscillator Features Fixed frequency 32,768 Hz ±1.0% (0 to 70 C), ±1.2% ( 30 to 85 C) frequency accuracy over all conditions 1.65 to 1.95 V, 2.7 to 3.6 V operation Low operating current,
TSYS01 Digital Temperature Sensor
High Accuracy Temperature Sensor 16/24 bit Resolution Low Power SPI/I 2 C Interface QFN16 Package DESCRIPTION The TSYS01 is a single chip, versatile, new technology temperature sensor. The TSYS01 provides
AP1506. Description. Pin Assignments. Features. Applications. 150kHz, 3A PWM BUCK DC/DC CONVERTER AP SD 4 FB 3 GND 2 Output
150kHz, 3A PWM BUCK DC/DC CONVERTER Description The series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing
AN NTAG21xF, Field detection and sleep mode feature. Rev July Application note COMPANY PUBLIC. Document information
Document information Info Content Keywords NTAG, Field detection pin, Sleep mode Abstract It is shown how the field detection pin and its associated sleep mode function can be used on the NTAG21xF-family
AN3332 Application note
Application note Generating PWM signals using STM8S-DISCOVERY Application overview This application user manual provides a short description of how to use the Timer 2 peripheral (TIM2) to generate three
W588AXXX Data Sheet. 8-BIT MCU WITH VOICE SYNTHESIZER (PowerSpeech TM Series) Table of Contents-
Data Sheet 8-BIT MCU WITH VOICE SYNTHESIZER (PowerSpeech TM Series) Table of Contents- 1. GENERAL DESCRIPTION... 2 2. FEATURES... 2 3. PIN DESCRIPTION... 3 4. BLOCK DIAGRAM... 4 5. ELECTRICAL CHARACTERISTICS...
AN1756 Application note
Application note Choosing a DALI implementation strategy with ST7DALIF2 Introduction This application note describes how to choose a DALI (Digital Addressable Lighting Interface) implementation strategy
STP16CPS05. Low voltage 16-Bit constant current LED sink driver with auto power saving. Features. Description. Order codes
Low voltage 16-Bit constant current LED sink driver with auto power saving Features Low voltage power supply down to 3V 16 constant current output channels Adjustable output current through external resistor
Obsolete Product(s) - Obsolete Product(s)
EMIF06-MSD03F3 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features EMI low-pass filter ESD protection ±15 kv (IEC 61000-4-2) Integrated pull up resistors to prevent
EMIF06-MSD03F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application. Description.
EMIF06-MSD03F3 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features EMI low-pass filter ESD protection ±15 kv (IEC 61000-4-2) Integrated pull up resistors to prevent
AN2837 Application note
Application note Positive to negative buck-boost converter using ST1S03 asynchronous switching regulator Abstract The ST1S03 is a 1.5 A, 1.5 MHz adjustable step-down switching regulator housed in a DFN6
AZ386 General Description. Features. Applications
General Description The is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 0 to keep external part count low, but the addition of an external resistor
LD39150xx Ultra low drop BiCMOS voltage regulator Features Description Typical application
Ultra low drop BiCMOS voltage regulator Features 1.5 A guaranteed output current Ultra low dropout voltage (200 mv typ. @ 1.5 A load, 40 mv typ. @ 300 ma load) Very low quiescent current (1 ma typ. @ 1.5
LORA1278F30 Catalogue
Catalogue 1. Overview... 3 2. Feature... 3 3. Application... 3 4. Block Diagram... 4 5. Electrical Characteristics... 4 6. Schematic... 5 7. Speed rate correlation table... 6 8. Pin definition... 6 9.
LORA1276F30 Catalogue
Catalogue 1. Overview... 3 2. Feature... 3 3. Application... 3 4. Block Diagram... 4 5. Electrical Characteristics... 4 6. Schematic... 5 7. Speed rate correlation table... 6 8. Pin definition... 6 9.
AN1229 Application note
Application note SD2932 RF MOSFET for 300 W FM amplifier Introduction This application note gives a description of a broadband power amplifier operating over the frequency range 88-108 MHz using the new
Low-Voltage CMOS Logic HD74LV_A/RD74LVC_B Series
COMMON INFORMATION Low-Voltage CMOS Logic HD74LV_A/RD74LVC_B Series R04ZZ0001EJ0200 (Previous: REJ27D0015-0100) Rev.0 1. HD74LV244A Supply Current I CC (ma) Supply Current vs. Operating Frequency 100 8bit
CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER General Description. Features. Applications
General Description The is a highly integrated solution for a constant voltage/constant current mode SMPS application. The contains one 1.21V voltage reference with ±1% accuracy, one current sensing circuit
STG3220. Low voltage high bandwidth dual SPDT switch. Features. Description. Applications
Low voltage high bandwidth dual SPDT switch Features Ultra low power dissipation: I CC = 1 μa (max.) at T A = 85 C Low "ON" resistance: R ON = 4.8 Ω (T A = 25 ºC) at V CC = 4.3 V R ON = 5.9 Ω (T A = 25
DRF4431F27 27dBm ISM RF Transceiver Module V1.10
27dBm ISM RF Transceiver Module V1.10 Features: Frequency Range: 433/868MHz Modulation: FSK/GFSK/OOK SPI Data Interface Sensitivity: -122dBm Output Power: +27dBm Data Rate: -0.123~256 kbps Digital RSSI
CMT2300A. Ultra Low Power Sub-1GHz Transceiver CMT2300A. Features. Applications. Ordering Information. Descriptions.
CMT2300A Ultra Low Power Sub-1GHz Transceiver Features Frequency Range: 213 to 960 MHz Modulation: OOK, (G)FSK 和 (G)MSK Data Rate: 0.5 to 250 kbps Sensitivity: -120 dbm at 2.4 kbps, F RF = 433.92 MHz -109
ESDA18-1F2. Transil, transient voltage suppressor. Features. Description. Complies with the following standards A 1
Transil, transient voltage suppressor Features Stand-off voltage 16V Unidirectional device Low clamping factor V CL /V BR Fast response time Very thin package: 0.65 mm Complies with the following standards
L6234. Three phase motor driver. Features. Description
Three phase motor driver Features Supply voltage from 7 to 52 V 5 A peak current R DSon 0.3 Ω typ. value at 25 C Cross conduction protection TTL compatible driver Operating frequency up to 150 khz Thermal
5A LOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
STPSC V power Schottky silicon carbide diode. Features. Description
600 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC
AN2581 Application note
AN2581 Application note STM32F10xxx TIM application examples Introduction This application note is intended to provide practical application examples of the STM32F10xxx TIMx peripheral use. This document,
I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i f a r e c o m p a t i b i l i t y a n d 4 - b y t e U I D
I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i f a r e c o m p a t i b i l i t y a n d 4 - b y t e U I D SLE 66R35I I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i
ISM BAND FSK TRANSMITTER MODULE RFM02
ISM BAND FSK TRANSMITTER MODULE (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info please refer to RF02 data sheets)
ST662AB ST662AC. DC-DC converter from 5 V to 12 V, 0.03 A for Flash memory programming supply. Features. Description
ST662AB ST662AC DC-DC converter from 5 V to 12 V, 0.03 A for Flash memory programming supply Features Output voltage: 12 V ± 5 % Supply voltage range: 4.5 V to 5.5 V Guaranteed output current up to 30
Obsolete Product(s) - Obsolete Product(s)
Single bilateral switch Features High speed: t PD = 0.3 ns (typ.) at V CC = 5 V t PD = 0.4 ns (typ.) at V CC = 3.3 V Low power dissipation: I CC = 1 μa (max.) at T A =25 C Low "ON" resistance: R ON =6.5Ω
MV1820. Downloaded from Elcodis.com electronic components distributor
Purchase of Mitel Semiconductor I 2 C components conveys a licence under the Philips I 2 C Patent rights to use these components in an I 2 C System, provided that the system conforms to the I 2 C Standard
TS2431. Programmable shunt voltage reference. Features. Applications. Description
Programmable shunt voltage reference Datasheet production data Features Adjustable output voltage:.5 to 4 V Precision selection at 5 C: ± %, ± 1% and ±.5% Sink current capability: 1 to 1 ma Industrial
SYNCHRONOUS DC-DC BUCK CONVERTER
General Description The is a 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 800mA load with high efficiency, excellent line and load regulation.
Obsolete Product(s) - Obsolete Product(s)
N-channel 30 V, 0.012 Ω, 8 A - PowerFLAT (3.3x3.3) ultra low gate charge STripFET Power MOSFET Features Type V DSS R DS(on) I D 30V
Obsolete Product(s) - Obsolete Product(s)
High bandwidth switch with 20- to 10-bit MUX/DEMUX Datasheet - production data Features Low R ON : 4.0 Ω typical V CC operating range: 3.0 to 3.6 V Enhanced ESD protection: > 8 kv (contact) and 15 kv (HBM)
LM2903W. Low-power, dual-voltage comparator. Features. Description
Low-power, dual-voltage comparator Datasheet production data Features Wide, single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent of supply
EMIF01-SMIC01F2. Single line IPAD, EMI filter including ESD protection. Features. Application. Description. Complies with the following standards
Single line IPAD, EMI filter including ESD protection Features High density capacitor 1 line low-pass-filter Lead-free package High efficiency in EMI filtering Very low PCB space consumtion Very thin package:
AP1688. Description. Features NEW PRODUCT. Pin Assignments. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
AC/DC, HIGH PF, HIGH EFFICIENCY, UNIVERSAL MAINS LED DRIVER CONTROLLER Description The is a high performance AC/DC PFC and constant current controller for universal mains LED driver applications. The device
DCPL-WB-00D3. Wide-band, dual-path directional coupler with ISO port. Features. Description. Applications. Benefits
Wide-band, dual-path directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range: 824 MHz-2170 MHz Low insertion loss (< 0.2 db) High directivity (>
Obsolete Product(s) - Obsolete Product(s)
P-channel 20V - 0.065Ω - 4.2A - SOT-223 2.5V - Drive STripFET II Power MOSFET General features Type V DSS R DS(on) I D STN5PF02V 20V
LExxAB LExxC. Very low dropout voltage regulators with inhibit function. Features. Description
LExxAB LExxC ery low dropout voltage regulators with inhibit function Datasheet production data Features ery low dropout voltage (0.2 typ.) ery low quiescent current (typ. 50 µa in OFF mode, 0.5 ma in
AS393/393A. Description. Pin Assignments. Features. Applications. Typical Applications Circuit LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS
LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS Description Pin Assignments The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically