YG865C08R Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM - 80 V Isolating voltage Viso Terminals-to-case, AC.min 500 V Average output current Io 50Hz Square wave duty =/2 Tc = 89 C 20* A Non-repetitive forward surge current** IFSM Sine wave, ms shot 45 A Operating junction temperature Tj - 50 C Storage temperature Tstg - -40 to +50 C Note* Out put current of center tap full wave connection. Note** Rating per element Electrical characteristics (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Maximum Units Forward voltage*** VF IF = A 0.76 V Reverse current*** IR VR =VRRM 75 µa Thermal resistance Rth(j-c) Junction to case 2.5 C/W Note*** Rating per element Mechanical characteristics Item Conditions Maximum Units Mounting torque Recommended torque 0.3 to 0.5 N m Approximate mass -.7 g
Outline Drawings [mm] 2
Forward Characteristic (typ.) 5 Reverse Characteristic (typ.) Tj=50 4 Tj=25 Tj=0 IF Forward Current (A) Tj=50 Tj=25 Tj=0 Tj=25 IR Reverse Current (μa) 3 2 Tj= 25 0. 0 0.0 0.0 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VF Forward Voltage (V) - 0 20 30 40 50 60 70 80 90 VR Reverse Voltage (V) 2 Forward Power Dissipation (max.) 8 Reverse Power Dissipation (max.) I 0 360 7 VR 360 DC WF Forward Power Dissipation (W) 8 6 4 2 λ Square wave λ=60 Square wave λ=20 Sine wave λ=80 Square wave λ=80 DC PR Reverse Power Dissipation (W) 6 5 4 3 2 α α=80 Per element 0 0 2 4 6 8 2 Io Average Forward Current (A) 0 0 20 40 60 80 0 VR Reverse Voltage (V) 3
60 Current Derating (Io-Tc) (max.) 00 Junction Capacitance Characteristic (max.) 50 40 30 20 Tc Case Temperature ( ) 0 90 80 70 60 360 DC Sine wave λ=80 Square wave λ=80 Square wave λ=20 Square wave λ=60 Cj Junction Capacitance (pf) 0 50 I 0 40 λ VR=40V 30 0 5 5 20 25 30 Io Average Output Current (A) λ:conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection VR 0 Reverse Voltage (V) 00 Surge Capability (max.) 00 IFSM Peak Half - Wave Current (A) 0 Number of Cycles at 50Hz 0 4
00 Surge Current Ratings (max.) IFSM PeakHAlf-WaveCurrent (A) 0 0 00 ttime (ms) Sinewave Transient Thermal Impedance (max.) Rth(j-c):2.5 C/W Transient Thermal Impedance ( C/W) 0 - -2-3 -2-0 2 t Time (sec) 5
WARNING. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 20. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. Computers OA equipment Communications equipment (terminal devices) Measurement equipment Machine tools Audiovisual equipment Electrical home appliances Personal equipment Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. Transportation equipment (mounted on cars and ships) Trunk communications equipment Traffic-signal control equipment Gas leakage detectors with an auto-shut-off feature Emergency equipment for responding to disasters and anti-burglary devices Safety devices Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). Space equipment Aeronautic equipment Nuclear control equipment Submarine repeater equipment 7. Copyright 996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6