As the Wood Turns The monthly newsletter of the Chicago Woodturners

Similar documents
AS THE WOOD TURNS The Newsletter of the Chicago Woodturners Club

Cape Cod Woodturners Minutes and News May 6, 2015

All the News That Will Fit On the Lathe

The Monthly Newsletter of the Windy City Woodturners

Between Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

North Alabama Woodturners Boaz, Alabama

the 360 Volume 25 Issue 1 January 2017 WCWT Christmas Party 2016

Alabama Woodturners Association

AS THE WOOD TURNS The Newsletter of the Chicago Woodturners Club

GOOD TURNS. October has been a very busy month and it hardly seems. November 2007 W O O D T U R N E R S. President s Message.

CHAPTER NEWSLETTER 2014 Issue 10 PROMOTING INTEREST IN WOOD TURNING

Your continuing efforts to the timely returning of resources are appreciated. Regards, Dave Hawley FRW Librarian. Did You Know?

Finger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society

As the Wood Turns The monthly newsletter of the Chicago Woodturners

Jam Chucks and Holding devices

Between Centers Club established

Tristan s Corner: Hopefully everyone stayed dry last month! I think we might get some drier weather soon.

July 19. Newsletter of the Treasure Coast Woodturning Guild June In this issue:

Between Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Minutes/Newsletter of Space Coast Woodturners January 14, 2015

THE SKEWED VIEW BI-CITY WOODTURNERS NEWSLETTER. Acorn Bird Houses for Everyone!! It s Christmas time again... (Just the cutest little houses)

Offset turning female form

AAW Insurance Update. Last call for Dues

As the Wood Turns. The monthly newsletter of the Chicago Woodturners. Michael Hosaluk Demonstrates at the CWT. November 1st

August Program: Warren Carpenter

January The next meeting is January 10, 2013

AS THE WOOD TURNS The Newsletter of the Chicago Woodturners Club

Between Turns. August Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Presentation Summary: February

June Greatest auction in years, where were you?

Buckeye Woodworkers and Woodturners

Between Turns. April 2012 MAW Meeting. Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Volume 1 October, 2017

CICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners March 2018

One Good Turn. Coulee Region WoodTurners. Chapter of the American Association of WoodTurners.

January Turn-a-thon. The new year has started for the inland woodturners and rather than starting with a demo, we had a turn-a-thon.

As the Wood Turns. Do you remember earlier this year when dinner was a half hour

March 2, 2018 Demo. Nick Agar. Turning a Lidded Bowl with Finial. Join us at the Bemis School of Art

PBCW News Volume 11, Issue 4 : April 2013

WOODTURNERS. Providing Woodturning Education, Assistance and Experience to the Miami-Dade Community

CICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners April 2018

Christmas Party. December The monthly newsletter of the Inland Woodturners

Between Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners

NEWSLETTER CENTRAL OHIO WOODTURNERS

Meeting Site and Lathe Storage

2017 Turning Artistry Department

Minutes/Newsletter of Space Coast Woodturners April 8, 2015

Chips & Bits. Peace River Woodturners. A chapter of the American Association of Woodturners. Meeting Announcements

CICAAW Turnings. Next month, Jim Dupler is going to mystify us with a tool handle creation demo.

The MUSHROOM The Newsletter of the ADIRONDACK WOODTURNERS ASSOCIATION Volume 6, No. 12 December 2006

Between Centers Club established

North Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09

A Member of the American Association of Woodturners

The Nutmeg. Newsletter of the Nutmeg Woodturners League Established June 14, NEXT MEETING March 13, 2017

Turn Ornaments at Woodcraft

The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners

The Monthly Newsletter of the Windy City Woodturners

INSIDE THIS EDITION. Bowls for Feed My People. President s Notes and Meeting Minutes Page 2. Hyde Center Page 3. February Demo Between Centers

Between Turns. March 2012 Meeting... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

The South Central Penn Turner Newsletter of the South Central Pennsylvania Woodturners, June-July 2006

WOODTURNERS OF ST. LOUIS

Dayton Carvers Guild March Find us on Facebook at Artistry in Wood, Dayton, OH

Echoes from the BAT. Inside this month s BAT Cave. Details inside. Bill Henry Kicks off October Meeting. November 50/50 Raffle One Lucky Winner

Dave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting.

Dayton Carvers Guild October Find us on Facebook at Artistry in Wood, Dayton, OH

AS THE WOOD TURNS The Newsletter of the Chicago Woodturners Club

Northwest Woodworkers Association

AS THE WOOD TURNS The Newsletter of the Chicago Woodturners Club

TRI VALLEY WOODCARVERS

June 2012 P. O. Box 201, Grayslake, IL 60030

Official Newsletter of The Regina Whittlers & Woodcarvers club. Issue 176 February 2018

Thimbles & Friends Quilt Guild Newsletter

the 360 Volume 25 Issue 4 April 2017 Roberto Ferrer made a complex process seem simple The March Demonstration: Carving on the Lathe How is this done?

Northern Rockies Woodworking Guild

Wood Chips LOCAL AAW CHAPTER

Get a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way

Between Turns. March Burning Demonstration... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Centers Club established

Between Turns. September Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

2 Great Fall Events. Wooly Adventure October 15 December 15

New Mexico Roadrunner Leather Artisans Guild NMRLAG NEWS

Between Centers Club established

The Chip Flyer. Golden Horseshoe Woodturners Guild - Burlington, Ontario. Presidents Annual Report

The Wood Spinner. You Never Know What will Show up at show & tell! this issue Presidents Corner P.2 Meeting Minutes P.3 Your Club P.

Northern Rockies Woodworking Guild

Go Jayhawks!!!!! See you all Monday!! Les Hastings. This Month s Meeting 1 President s Corner 1 Minutes 2 From the Editor 3

June 1st Meeting CALGARY WOODTURNERS GUILD NEWSLETTER. Issue 2, June Last Meeting. About us

PRESIDENT S MESSAGE. What's Happening! May 2017, VOL. 14, Issue 2

August 6, The demonstrator will be Steve Cook.

HARRY NOHR WOODTURNERS

2013 CALENDAR. September 14: Guild meeting at 10 AM at the LibertyTown Studio. Art Attack from 10 to 4 downtown Fredericksburg.

The Monthly Newsletter of the Windy City Woodturners

Smoky Mountains Woodturners NEWSLETTER

ECHOES FROM THE BAT CAVE

CLUB MEETING NOTES Club Officers Volume 21 Issue 10. The New and Improved Long Island Woodturners Association

One Good Turn. Coulee Region Woodturners. Chapter of the American Association of WoodTurners.

Canadian Quilters Association/ Association canadienne de la courtepointe

View - Buy Learn Montana State Wood Carvers Show & Sale. Tom Collins 420 River Rd W Plains, MT

Turn to the News. Inside this issue: Highlights

Mortar and Pestle. January The monthly newsletter of the Inland Woodturners. A Member of the American Association of Woodturners

Transcription:

September 2008 As the Wood Turns The monthly newsletter of the Chicago Woodturners Celebrating our 21st year as a Chapter of the American Association of Woodturners September Highlights: Michael Hosaluk Demo and Classes in November, page 3 Dave Reilly s August demo, page 4 Symposium updates, page 5 Andy Kuby helps Lyle Jamieson out with some of his magic blue tape. Next Meeting: September 9, 2008 7:00PM Woodcraft Supply 1280 E. Dundee Rd. Palatine, IL Mark Sfirri Demonstrates at the CWT September 13 M a r k Sfirri s turnings push the boundaries of spindle turning, utilizing multi-axis techniques to create unique, creative works of art. Don t know what multiaxis means? That s ok, Mark will make everything clear on September 13. Mark s work is in some of the finest collections of art and sculpture, including the Mint Museum, the Mason collection, and of course, the Louisville Slugger Factory and Museum. That is an impressive resume in itself, but Mark is also featured in the AAW publication Turning Twenty - Still Evolving, recognizing turners who have made a place for themselves over the past twenty years in the art world. Mark s demo day may include useful turnings such as a pad-foot table leg, but knowing Mark s sense of humor, most of his production will be in useless but t h o u g h t - provoking turnings such as an Mark Sfirri Hands-On Class off-center lady figure, a rolling pin that your Motherin-law may laugh at, and baseball bats that were rejected from the bat factory. Join us on September 13 for a playful, but informative look at wood turning, suitable for turners of all levels and experience. Admission to this all-day demonstration is $30.00. Doors open at 9:00 am at Woodcraft Supply in Palatine. This is a special event certain to make you think (and turn) a little off-center. As of this writing, there are still two openings for Mark s class Mark Sfirri will host a two-day session, with six students. Day One of the class will be on Friday, 9/12/08, and Day Two will be on Sunday, 9/14/08, flanking the Saturday demonstration on the 13th. Tuition is $220.00, and registration is now open. Contact Jan Shotola at 847-412-9781 or jshotola@yahoo.com to reserve your spot in this fascinating class. 847-776-1184 Regular Features: Curls from the President s Platter, page 2 Sparks from the Grinding Wheel, page 2 Membership News, page 4 On the Raffle Table, page 5 Members Gallery, page 6 Upcoming Events, page 7 For Sale Items, page 7 Don McCloskey Pen Demo Tired of the same old pens? Try using rifle cartridges. Try some corn cob (really, we re not making this up). Perhaps a multi-layer glue-up that forms a Celtic knot interests you. Don McCloskey will give you everything you need to know to produce some unique pens, using unique materials. Don has been teaching popular penmaking classes at Woodcraft, and he ll use the input from his students to present this fascinating demonstration. Raise your skills from mundane to unique with Don s demo in September. September CWT Meeting Pens by Don McCloskey

September 2008 Page 2 Curls From the President s Platter Phil Brooks In last month s newsletter Marie Anderson, cochairperson for the symposium, wrote an interesting and entertaining article about her emotional rollercoaster ride leading up to and during the symposium. I thought it would be interesting to discuss what events took place, over the previous 18 months, to make that symposium a reality. We started with steering committee meetings to evaluate the feasibility of holding such an event. First we visited numerous facilities before finding the right venue. Next we put together a list of the major tasks that we needed to do and things we needed to spend money on to come up with a Work Breakdown Structure (WBS) and an estimate of a detailed budget. We estimated 3 budgets, based on 150, 200 and 250 attendees. Our admission fee was set to break even with 150 attendees. The WBS tasks then grouped into categories to define the various committees we needed. As in any endeavor, success is always based on getting the right people in the right job. Given the list of committees, we identified who would be the best person to be the committee chairperson for each committee and then convinced them to take the job. They in turn, identified people who they wanted to be on their committee and convinced them to join the group. We then presented our plan for the symposium to the membership for their approval. Using the WBS we broke down the tasks even further and used this breakdown to create a detailed schedule of each task, showing when the task should be started and finished. Every month after that, the committee chairpersons met to monitor and mark the status on the schedule. I felt strongly that we needed to do this religiously, since there is a tendency to think there is plenty of time to do things later and we would wind up running out of time with too many tasks left to do. Although we probably had too many tasks, and now that we know what to focus on, we can significantly reduce the number. We tracked over 200 tasks for TOC 2008. Sometime during the last 4 months, it became apparent that we were going to be handling a lot of data and generating a lot of paper so I wrote a relational database. The database allowed us to record data once and use it many different ways. We used it to create the letters of confirmation and their address labels, name tags for attendees, demonstrators, trade show vendors and Sparks From the Grinding Wheel: Notes from your Editor banquet only guests, as well as housing and attendance reports. In addition, we used it to record the items donated for the auction, create bid cards and print out invoices after the sale. Finally, we used the database to create demographic information, to be used next time, to see where our attendance came from, by AAW chapter and by state. Looking at the demographics, we found that the symposium had 196 fulltime attendees, 34 one day attendees from 32 AAW Chapters coming from Arkansas, Iowa, Illinois, Indiana, Michigan, Missouri, Montana, Ohio, Oklahoma, Pennsylvania, and Wisconsin; plus 1 from England. Our attendance at the banquet/symposium was 256. In summary, in order to have a successful symposium, we needed to have a good venue, a large group of talented and dedicated people, a detailed schedule and a realistic budget and a means of monitoring the status of the schedule and budget every month. Since that is what we had, I knew the symposium was bound to be a success. My most sincere thanks and gratitude goes out to the 80 people who made this symposium successful. Without their talents and determination this would not have happened. Paul Shotola Your newsletter is in need of a person (or persons) to report on the American Association of Woodturners, the AAW website, and review articles published in the AAW journal, American Woodturner. Your job would be to gather information on the AAW and condense that info into a 200-300 word monthly column. The subject matter would be entirely up to you. We encourage submissions on any and all of the varied programs and subjects of AAW involvement. Multiple columnists are invited. Perhaps this month you re inspired, and next month another reporter has content. That s ok, and even recommended. Contact me for guidelines. Writing skills are secondary to a desire to report the activities of our national association. Your membership is counting on you to keep them informed. Phil Brooks, CWT President and Board Liaison to the TOC Steering Committee Symposium attendees traveled from Arkansas, Iowa, Illinois, Indiana, Michigan, Missouri, Montana, Ohio, Oklahoma, Pennsylvania, and Wisconsin; plus 1 from England. The Long Distance award went to Jim & Jacque Thompson from Broken Bow, OK. That s a distance of over 850 miles. For coming that far, they received a nice prize donated by Woodcraft and a round of applause. Cindy Sing, Mary Lacer and Carole Floate: The Auction Babes You have to make sparks to produce a keen edge

September 2008 Page 3 Michael Hosaluk: Demonstration & Classes in November Canadian turner Michael Hosaluk will be demonstrating at the CWT meeting space in Palatine on Saturday, November 1, 2008. One of the founders of the American Association of Woodturners, Michael is known for his innovative and playful approach to turned art. Hosaluk is the original force behind the Emma Lake Collaboration, a biannual event that unites artists in a collaborative event. A frequent demonstrator at AAW national symposia and instructor at many schools, including the Marc Adams school in Indiana, Michael s work is featured in galleries, museums and collections world-wide. In 2002, Michael s book, Scratching the Surface, an exploration of surface treatments in woodturning, was released. As the 2005 recipient of the prestigious Bronfman award, Michael s efforts to promote art and craft were recognized by the Canadian government Michael frequently collaborates with other artists, including Michael Lee, Binh Pho, and Mark Sfirri, as evidenced by the work Strange Fruit. The Chicago Woodturners look forward to Michael s return to Chicago with an all-day demonstration on Saturday, November 1, with both one- and two-day hands-on classes to follow. Michael Hosaluk s Hands-on Classes will be held at the CWT meeting space at Woodcraft Supply in Palatine, IL Sunday, November 2, 2008 (one day class): Tuition $120 Monday & Tuesday, November 3 & 4 (two day class): Tuition $240 Classes are suitable for turners of all experience levels. An experienced teacher, Hosaluk will help turners of every level to expand their turning vocabulary. Classes are limited to six students per session. To register for a class, contact Jan Shotola, CWT Secretary jshotola@yahoo.com 847-412-9781

September 2008 Page 4 Dave Reilly s Carving Demo: August Meeting Clint Stevens Think great carvers. Who comes to mind? George Washington Carver? Norman Bates? That guy at the Japanese steakhouse? Done? Let s focus on WOOD carvers. Here s a great carver: Dave Reilly. Dave is a carver, teacher, demonstrator, and our witty good friend from the Windy City Woodturners. Dave introduced several lathe accessories to aid carving on woodturnings. This included an indexing plate, a pencil rest for accurately marking the turning, and an ingenious adjustable mount for turnings and face plates. The mount owes much to the easy availability of a 1 x 8 TPI threaded rods (I got mine at my neighborhood hardware store.) Carving involves a few specialty hand tools, and Dave gave us the run down on them with some blissfully straightforward wisdom. The Tao of Dave says that the tool used depends on the type of carving being done. Large carvings call for large handled tools and a mallet. For small carvings, palm tools (Flexcut spring steel, for example) are just fine. Membership News: Who s New We were pleased to welcome four guests at the August meeting. Jim Decker, is from Libertyville, IL, and is a member of a storytelling club that meets the same night as CWT CWT membership now stands at 193. According to Dave, all carving tools are good. It s not necessary to have all tools, just keep in mind that octagonal handles don t roll toward the end of the bench. Round handles are prone to such shenanigans. Sharp tools are no less important for carving as they are for woodturning. Dave reviewed the basics of sharpening to help us out here. If you are foggy on the necessary skills to a sharp tool, they are: 1. Grinding Give that tool some shape. 2. Honing Grab your Arkansas stone and sharpen that tool. 3. Stropping Didn t forget that, did you? Good, now it s carving time. A specialty source for sharpening equipment and carving tools is Wood Carvers Supply in Florida. The website is well laid out and easy to use. Now that Dave had whet our appetites to carve (I ll groan for both of us), he explained the fundamentals of carving woodturnings. Plan your carvings such that the cuts do not run against the grain. Wrap one hand around the meetings, but we hope to see him at future club meetings, and possibly favor us with a story or two. Our three other guests share the same last name, so it shouldn t be difficult to welcome them at future meetings. David and Joe Simon are from Mt. Prospect, IL. David has done tool, place the heel of that hand on the carving, and use the fingers of the other hand to help control the cutting edge. Rub the bevel as usual, and with gentle controlled pressure, surprise, you are carving. For larger projects, or contrary woods, gentle tapping from a mallet might be in order. Did you miss Dave Reilly s reading list? Here it is: Carving on Turning, by Chris Pye; Essential Woodcarving Techniques; by Dick Onians; How to Carve Wood, by Richard Butz; and of course. The Boy Mechanic, by the editors of Popular Mechanics Dave introduced us to the fascinating concept of a humility block in o l d Amish quilts. T h e story g o e s that quilters would intentionally have one block with an obvious error. Since only God is perfect, it would be prideful to make a perfect quilt. How about that? I ve been turning Amish style for years without realizing it. Andy Kuby some turning in high school and wants to learn more. Murray Simon is from Northbrook, IL. We re always happy to have guests at our meetings. Guests are added to our Newsletter mailing list to make sure that they are kept current on CWT events. Dave Reilly Reilly will be teaching at the Marc Adams School in 2009. www.marcadams.com Private lessons are also available: 630-243-9348 Guests and visitors are always welcome at our meetings. Admission is free! Members bring their own chairs, but there are always plenty of extras. We ll find a spot for you.

Symposium Updates If you were at the August meeting, you witnessed the high that was still wafting about after the symposium. If you were at the August meeting, you may have noticed that there were smiles and pats on the back and a renewed sense of camaraderie among the attending members that hasn t been seen in a while. If you were not there, you really missed the contagious energy that was humming throughout the evening! You also missed the results of the evaluation forms that we asked the attendees to complete before they departed TOC 2008. I d like to take this time to run them by you one more time. First, special thanks to Sherry Stevens for taking all the raw data and transforming it into a very useful and understandable form that makes this report much more meaningful! We asked the attendees to rate us on various things we believed would assist us in making TOC 2010 much better. Here s what they said: 96% strongly agreed or agreed that the pricing was appropriate for quality of demonstrators and venue. 97% Strongly Agreed or On the Raffle Table Agreed that our venue was well suited to host TOC 2008. 99% agreed that the Instant Gallery is an important part of any Symposium and of those, 96% thought our gallery was laid out well & showcased the pieces well. The trade show got high marks as well with 89% of attendees saying this is an important part of the symposium, 99% were neutral to strongly agreeing that we had a good variety and most importantly, 89% said that they would purchase from these vendors based on meeting them at our symposium. The demonstrations got high marks with 99% of attendees agreeing we had a good variety of demonstrations and 91% said that the demo line up was a major reason for attending this symposium. We need to work on our room assistants because we only had 82% of attendees agreeing that the room assistant kept the camera focused on the demonstration making it easy to follow along with the demo we will turn this around next time by training room assistants throughout the year (so go ahead and volunteer to run the camera at the monthly meetings get in Marie Anderson some practice!) We also had some last minute glitches with the AV equipment but overall, we got 84% agreeing or strongly agreeing that the AV equipment was appropriate for the symposium we will be updating some of the equipment to assist in bringing this number up into the 90% range or above next time. The Auction garnered a 95% agree to strongly agree that we had an excellent variety of pieces available. However, the most important number is the number we all can be especially proud of: 99% of the attendees agreed or strongly agreed that they would recommend this symposium to a friend or club member. For our first symposium, these numbers speak volumes!!! I think it is only appropriate to salute all of you for the hard work, late nights, sweat and determination you put into making this the best first time symposium any of us could have imagined. Thank you all once again! Next month I hope to be able to report on the educational opportunities that will soon be made available through the proceeds of the TOC 2008 auction and raffle. Paul Shotola What s the raffle Bring Back all about? That s a common question, especially from our newer members. Here s the deal: Each month, there s a special item on the raffle table donated by a CWT member. By purchasing raffle tickets, someone wins that item. The following month (here s the Bring Back ) the winner brings in an item for the raffle, and the cycle continues. The item may be anything a turner may desire: wood, tools, a finished turning, there s no other rules. Last month, the prize was a stack of roughed out, dried bowls. We ll see what the winner Brings Back in September. Gary promises to have a full table of great items, so stop by and get your tickets! September 2008 Page 5 Binh Pho Jacques Vesery Brooks & Company Bob Bergstrom Lyle Jamieson Raffle tickets are 6 for $5.00 and the value pack buys 13 tickets for only $10.00. Support the raffle, and you support the CWT.

Members Gallery Reviewed by Tom Waicekauskas The August Gallery was encouraging, in that many newer members brought their work in. Some folks consider that a brave move, as newer work can receive some criticism. The review is meant to be inspiring, uplifting, and educational. The intent is always to help us move forward, improving our eye and sense of balance. Technically, it s important to see what others are doing, and learn how they are doing it. Thanks to Tom Waicekauskas for reviewing the August submissions, and thanks to the artists who put their work on display for our collective benefit. September 2008 Page 6 Editor s Choice Andy Kuby: Buckthorn Don McCloskey: Celtic Pen Ken Staggs: Sugar Maple Bill Brown Cherry platter with wrought iron stand Phil Brooks: Wine Stoppers Bill Brown: Cherry Andy Kuby: Firewood Stool Ken Staggs: Spheres Michael Kuehl: Cocobolo, Blackwood Hugh Pearl: Abalone, Mesquite, Corian Pens Bill Brown: Cherry Bill Robb: Maple & Birch Burl, Bloodwood Ken Staggs: Box Elder Bill s work is simple, but complex. I can hear you now: Paul, you ve been reading too many ART books! Work with me, folks. Bill s platters are subtle shapes, sometimes with textured or burned rims. This cherry example showcases the symmetry of the nicely centered grain, and doesn t need additional embellishment. The iron stands are interesting by themselves, but the black finish and restrained ornamentation make them a frame that focuses the eye on the turning. Simple, yes, but Bill s turnings have a complexity that deserves a closer examination of the whole: grain, embellishment (or lack of) and stand included. Ken Staggs: Walnut Josh Conan: Textured Top Mark Johansen: Tulipwood Space limitations prevent us from presenting every gallery submission in the newsletter. For gallery photos from past meetings, visit the CWT website : www.chicagowoodturners.com/gallery Each month, your Editor will select a Gallery turning that he feels showcases a unique design feature, technique or use of material. Selection is purely personal and arbitrary, and probably won t reflect the opinions of anyone but the Editor. When you re the Editor, you can do this, too.

September 2008 Page 7 Upcoming Events News of Art Shows, Classes, Turning Symposia and Events of Interest As the Wood Turns The monthly newsletter of the Chicago Woodturners Monthly meetings are held on the 2nd Tuesday of each month from 7:00 pm till 9:30 pm Woodcraft Supply 1280 Dundee Rd., Palatine, IL 847-776-1184 Guests and visitors are welcome Visit our website: chicagowoodturners.com for more gallery photos, past newsletters, expanded calendar and late-breaking news. Membership in the Chicago Woodturners is available to anyone wishing to increase their turning skills through education, discussion and critique. Annual dues are $25.00 for a single membership and $35.00 for a family. Visit our website for an application or contact: Andy Kuby, Membership Chairman The Chicago Woodturners is a chapter of the American Association of Woodturners (AAW). Visit their website for more information. www.woodturner.org September Mark Sfirri demonstration, September 13, Woodcraft, Palatine, 9:00 am Mark Sfirri Hands-on class, September 12 & 14, Woodcraft, Palatine Turning 101 with Carole Floate, September 20, Woodcraft, Palatine Pen Turning with Don McCloskey, September 27, Woodcraft, Woodridge October Pen Turning with Don McCloskey, October 11, Woodcraft, Palatine Carving Workshop with Dave Reilly, October 13, Woodcraft, Palatine Pen Turning with Don McCloskey, October 18, Woodcraft, Woodridge How to Turn a Bowl with Carole Floate, October 25 &26, Woodcraft, Palatine Artistry in Wood, North Suburban Carvers, October 25 & 26, SuPage County Fairgrounds, Wheaton. Terry Pijut: 847-458-2919 November Michael Hosaluk demonstration and classes, Nov 1-4. See page 3 SOFA Chicago. November 7-9, Navy Pier, Chicago, IL www.sofaexpo.com Sharpening Carving Tools with Dave Reilly, November 10, Woodcraft, Palatine The Freedom Pen Project, November 11, Woodcraft, Palatine, www.freedompens.org Turning 101with Carole Floate, November 15 & 15, Woodcraft, Palatine Pen Turning with Don McCloskey, November 22, Woodcraft Supply, Palatine, Turn a Christmas Ornament, Woodcraft Staff, November 22, Woodcraft, Woodridge Turn a Bottle Stopper, Woodcraft Staff, November 29, Woodcraft, Palatine December Empty Bowls, Dec 6, Oakton Community College, Des Plaines, IL Carve a Walking Cane with Dave Reilly, December 8, Woodcraft, Palatine Turn a Bowl with Carole Floate, December 13 & 14, Woodcraft, Palatine Club Demonstrators and Gallery Reviewers For Sale Demonstrator Subject Gallery Paul Pyrcik September Don McCloskey Unique Pens Dan & Marie Anderson October Josh Connan Making Carving Tools Pixie Eslinger November Phil Brooks Safety Overview Paul Shotola December Holiday Party Items for sale or trade by and for the CWT membership. Tools for sale: General woodworking tools and equipment, including routers, sanders, saws, including a band saw, scroll saw and an Atlas 42H metalworking machinist lathe. Contact: Peter Jackiw, (630)264-1929, Kp2jacks@comcast.net for a detailed list and pricing. Items of interest to woodturners for sale, trade or free are welcome. Noncommercial ads only, please. To place an ad, contact the Editor.