CICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners March 2018
|
|
- Randell Reeves
- 5 years ago
- Views:
Transcription
1 Central Indiana Chapter of the American Association of Woodturners March 2018 CICAAW NEWSLETTER Officers President: Jim Dupler Vice President: Rich Parker What s Inside This Issue February Demo; turning a tool handle Contest of the Month (color) State Fair Pictures Tool Tip by Rich Show and Tell Note from President Treasurer: Tom Meeker tjmeeker@comcast.net Newsletter/Librarian: Jennifer Flynn jennifer.flynn@hotmail.com Ned Hugus, R.I.P. 02/07/18 He was famous in our club for his one-line zingers at demos. Ned was great fun to be around. He will be missed. Webmaster/ , Newsletter: Bob Anderson BobAnderson@tds.net Website CICAAW.org Remember: if you have mastered a skill in turning or in another interesting artistic form that you think the club would like to see in a demo, please contact Rich or Jim (contact info at left). We can only have demos if we have our talented members share their knowledge. If you have ideas on what you would like to see in the future, Jim and Rich would enjoy hearing from you. 1
2 Turning A Tool Handle February Demo (Plus how to add Texturing to your Turning) Jim showed us how to turn a tool handle with a brass ferrule. He started with a 2 x 2 x 12 long piece of dried Bradford Pear, turned it round between centers with his new roughing gouge that (he paid full price for). Then he held one end with a 4 jaw chuck and drilled the other end with a 5/8 Forstner bit held in the tailstock with a Jacobs Chuck at 800 RPM. Replaced drill and chuck with a live center and turned a tenon to except a 5/8 brass compression fitting from Lowe's. The fitting was screwed on with help from an 18 inch Crescent wrench. Then the brass nut was turned round at slow speed with a parting tool. The handle was then turned to a comfortable shape and sanded ready for a new tool to be epoxied in place. Fittings from Lowes Handle, roughed out Jim using his new roughing gouge Turning a tenon Tool handle that has a brass ferrule After the brass ferrule had been turned Jim is talking about the 18 inch crescent wrench Fitting the ferrule Part 2 of demo on next page 2
3 Plus How To Add Texturing To Your Turning Jim used a lot of different texturing tools. He also included a quick look at how to use the new mandrel on making bottle stoppers. Jim made sure he left us new ideas to try. Thanks for a jam-packed 2 hours of demos! Arbortext tool Bottle stopper Mandrel By Stainless Bottle Stoppers Jim uses this for jewelry - you can turn each screw and it makes different cuts All of this picture grouping is the Elf Tool. The last picture Jim add some color. Robert Sorby texturing tool If you have any questions, contact Jim. 3
4 Color Contest 1. Must turn item; timeframe from February meeting till March meeting. 2. Must fit inside the brown sack bag provided by the club (lunch size). 3. Must be colored somehow. Wood burning can be added but will not be counted as color. Only color will be judged, not the piece itself. 4. The judging will be anonymous. Please keep your turning in the bag and someone who is not participating will be in charge of helping with the judging. How the judging will work : turned pieces will be anonymous. One person (who is not participating) will take the art out of the bag and place the pieces in front of the bags. Each person in the club will drop a ticket in the bag voting for the turning they like best. The person who has the most tickets wins. Prizes: 1st: $ nd: $ rd: $5.00 4
5 Woodworking Show 2018 February 5
6 Tool Tip by Rich It s all about the edge I have spent a lot of effort over the past couple of years trying to learn everything I can about turning. One area that has a lot of information available is your turning tools. There are lots of comments on various Web sites and blogs and many YouTube videos to watch. What is the best tool angle for your gouge? How do you approach the turning with the tool? How often do you sharpen? And on and on. So I can t answer all the questions, nor am I qualified. But there are some basic ideas that will help you think about the turning process, tool in hand. Let s focus on bowl gouges... There are many grinds that you can use, and if you are an experienced turner, you have your favorites but if you are new to turning, it can be confusing. The most common are the fingernail grind, the swept back grind, and the traditional or simple grind. (There are several signature grinds in the literature). The relevant feature is the nose angle and the side angle of the grind and how much side length is available to cut with. While it is true that the nose angle can influence how aggressively the gouge will cut, if you stay within reasonable values they all work similarly. From what I can tell, if you are a production turner, where time is money, you will care what grind you use. But for the rest of us, it is about access to the piece with the correct geometry for the cut and the experience you have to develop muscle memory. A 45 +/- 5 degrees nose angle is supposed to be close to the most efficient at cutting when approaching the work with a flute that is angled about 45 degrees. A 55 degree and 65 degree are common as well for deeper bowls. I am sure there are look up tables somewhere that tested this with different woods to find the most efficient cut. But the reality is that you can cut just fine with smaller angles and larger angles. Bevel rubbing gets harder depending what you choose but the gouge will cut. If you use a jig (and I highly recommend you do) to sharpen your gouges, don t worry too much about getting an exact angle. What is important is that you use the same one each time so you develop the muscle memory and it becomes natural for that gouge. When would you want a steeper angel? On the inside of a bowl, the larger nose angle will allow the transition cut from the side walls to the bottom of the bowl while maintaining bevel contact. Now that you have a gouge in hand, how you present the edge to the work determines the cut you will get. In bowl turning where you are faced with side grain and end grain twice per revolution, how you angle the tool is important. To get a good cut with end grain, you have to slice it. For side grain you can get a good cut by a peeling cut. The short answer is that you should learn to hold a strong vertical angle 6
7 of the cutting edge to bowl, to slice the end grain. The bowl gouge can be held in more than one way to accomplish this. Again, there are lots of You Tube videos that can show you how to do this and it is beyond the scope of this article to describe it without graphics. But I suggest you think about how you hold the gouge edge the next time you start turning and look at what kind of finish you get with the different options. There is a wealth of information available on the AAW website and our CICAAW library has some good books and DVD s to help your learning process. As always, if these ideas are not clear, look me up at the next meeting or send me an or visit me in my shop. Woodturning Tip of the Day Brass Inlay You can get free brass inlay for your turnings at any key making place. They will be happy to share their fillings with you. But these days, many of the keys are steel. You don't want steel in your inlay. So, push a magnet into the filings and all the steel chips will become attached to the magnet. March 11 Meeting Topic: Rich Parker will be demonstrating how to turn an off-center bowl like to ones shown below. The technique is not hard to master but requires a couple of different jaw sizes for your scroll chuck. A jam chuck can be used as well. 7
8 Show-n-Te ll February Rich Parker Ash platter Rich Parker Cherry bowl Rich Parker Cherry bell-shaped bowl Dave Wilkerson Segmented Poplar Pat Wilkerson Cherry lidded-filled Pat Wilkerson Painted iridescent bowl Tim Kennedy Catalpa Bowl/Burnt & sand blasted Jennifer Flynn Coffee scoop Ron Cruze Tall Vase 8
9 Closing words from our President Spring is not too far away and hopefully the bitter cold has left. Now is a good time to get back your shops and turn something beautiful from all that wood you have stashed away. We all get too busy with outdoor projects come spring and summer, so let's see some really nice items brought in for "Show & Tell" along with your color contest pieces. See you in March. James F. Dupler Join us for our next meeting - Everyone Welcome 2nd Sunday of every month At the Zionsville Boys and Girls Club 1575 Mulberry Street, Zionsville, IN Directions From the North: From US-421 and SR-32, go SOUTH on US-421 (2.0 miles) Turn Right on W 156th ST/COUNTY ROAD 200 S. (p9 miles) Turn LEFT onto COUNTY ROAD 950 E/PLEASANT VIEW RD/ N 68TH RD. Continue to follow N 68TH RD (3.4miles) Turn LEFT onto ZIONSVILLE RD/ ZIONSVILLE-WHITESTOWN RD. (<0.1miles) Directions from the South From I-465 and MICHiGAN RD (becomes US-421) go NORTH (2.8 miles) Turn LEFT onto S CR-550 S/TEMPLIN RD (0.6 miles) Turn LEFT onto S 1100 E/ WILLOW RD (0.1 miles) Turn RIGHT onto TEMPLE AVE (0.3 miles) Turn LEFT onto TURKEY FOOT RD (0.1 miles) 9
10 Central Indiana Chapter of the American Association of Woodturners March AAW s 32nd ANNUAL INTERNATIONAL SYMPOSIUM JUNE 14-17, 2018 PORTLAND, OREGON Learn more at tiny.cc/aaw2018 If you are not a member of the AAW, it s never too late to join! There are many benefits such as online videos and past issues of the American Woodturner. AAW members can access all past journal articles online at woodturner.org. Remember: if you shop at Rockler, you get 10% off of purchases if you are a current member of our club. Every time you make a purchase, our club earns a check mark, resulting in gifts for our club. Our club has anchorseal for sale, $
CICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners April 2018
Central Indiana Chapter of the American Association of Woodturners April 2018 CICAAW NEWSLETTER Officers President: Jim Dupler jdupler01@comcast.net Vice President: 765-860-7036 rddlpark@yahoo.com Treasurer:
More informationCICAAW Turnings. Next month, Jim Dupler is going to mystify us with a tool handle creation demo.
Central Indiana Chapter of the American Association of Woodturners CICAAW Turnings FEBRUARY 2018 January Meeting Notes and Upcoming News The official meeting began at 2p.m. at the Zionsville Boys and Girls
More informationCape Cod Woodturners Minutes and News May 6, 2015
Cape Cod Woodturners Minutes and News May 6, 2015 The May meeting started at 6:40 following a pre-meeting hands-on demo by Jim Silva and tool sharpening tutoring by Mike Grady. President Clarke Buchanan
More informationBetween Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 2, I S S U E
More informationRegular Monthly Meeting ( first Tuesday ) Message from the President. Dave Best. April, Mike Swenson demos for us. Apr 6th - M& M Machinery
Number 102 Utah Woodchips Newsletter April 2010, page 1 Regular Monthly Meeting ( first Tuesday ) Message from the President April, 2010 We met at Timberline Woodworkers Supply in March. Mike Swenson provided
More informationGoblet. Two-Part. About a year ago, we were invited. Toast your woodturning skills By Bob Rosand
Two-Part Goblet Toast your woodturning skills By Bob Rosand About a year ago, we were invited to attend the bat mitzvah of a friend s daughter. Unfortunately, we were unable to attend because of prior
More informationGeorge Hatfield Demonstrates for CMW April 10, 2010 By Bob Gunther Photographs by Tina Collison
George Hatfield Demonstrates for CMW April 10, 2010 By Bob Gunther Photographs by Tina Collison Overview: George Hatfield is from Sidney, Australia. He entered the woodturning field as an apprentice and
More informationDemonstration Bob Rosand October 20, 2007 by Bob Gunther
Demonstration Bob Rosand October 20, 2007 by Bob Gunther Overview: Bob Rosand has been a woodturner for more than 25 years. He teaches, demonstrates and writes articles on many topics pertaining to woodturning.
More informationProviding an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners
April 2016 This n That Show & Tell Al Stirt Gavel Turning Ray Fenton Dizzy Bowl Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners Chips
More information*****Note***** Contains March 2018 Minutes April, Buckeye Woodworkers & Woodturners Newsletter April 2018
Contains March 2018 Minutes April, 2018 NO MEMBERS OR VISITORS SHALL ENTER OR EXIT THE CAMP VIA THE CHRISTMAN ROAD EN- TRANCE. MEMBERS MUST ENTER AND EXIT FROM MT.PLEASANT ROAD. BUCKEYE WOODWORKERS AND
More informationA candle stick addresses transferring and reproducing dimensions from a plan and breaking the project into steps.
Activities Discussion These projects allow more skill development including making items to match a drawing, sizing projects to specific dimensions, and just trying fun stuff for the first time! A candle
More informationGet a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way
Get a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way By David Heim Safety gear. Instead of relying on safety glasses alone, many turners
More informationBetween Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners
C O N T A C T U S President: Tom Mogford 810-629-6176 Vice President: Pete Buccelato Between Turns Michigan Association of Woodturers A chapter of the American Association of Woodturners V O L U M E 2
More informationReprinted with permission. American Association of Woodturners
Playing Fire with By Nick Cook My fascination with fire started in 1993 at the AAW symposium in Purchase, New York. I watched Australian Vic Wood burn the rim of a platter, and I was immediately hooked.
More informationBetween Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 3, I S S U E
More informationTURNING BOWLS AND PLATTERS. With Glenn Lucas 2014 ARROWMONT CLASS JIM PERRIELLO
TURNING BOWLS AND PLATTERS With Glenn Lucas 2014 ARROWMONT CLASS JIM PERRIELLO 1. Glenn Lucas Instructor and Greg Schramek (Asheville, NC), assistant. a. Glenn Lucas is an Irish woodturner who is recognized
More informationArtistic Woodturners Meeting of 12 August 2017
Artistic Woodturners Meeting of 12 August 2017 Meeting was called to order by Norm Freeman. One visitor, Mike Francis, president of Azalea Woodturners, was recognized. 25 members attended. Business portion
More informationCaution: Always use safety glasses or a full face shield when turning anything on a lathe.
May 26, 2009 Making a 6 Peppermill Page 1 Acknowledgment is given to Jackie Johnson from Nashville, TN for providing the original instructions and method for this article. The design of this mill can be
More informationUnder the Bark Where the good stuff is, peel it back or use it as an accent.
Under the Bark Where the good stuff is, peel it back or use it as an accent. Newsletter for June, 2015 Club officers for 2015 President: Vice President: Secretary: Treasurer: Susan McCoy Brian Malnar Kevin
More informationAlabama Woodturners Association
Alabama Woodturners Association April 2019 A member of the American Association of Woodturners Meeting location: Homewood Senior Center, 816 Oak Grove Rd., Homewood, AL 35209 Meeting time: The second Saturday
More informationChips & Bits. Peace River Woodturners. Meeting Announcements. Larry Fox at the lathe. Larry Fox Demo
Chips & Bits Peace River Woodturners Volume 5 Issue 5 A chapter of the American Association of Woodturners May 2012 Contact Us President: Jim Ellsworth: 941-505-1016 First Vice President: Norm Desjardins:
More informationThe Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners
The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners March 2012 In this issue News Items............... Page 1 Upcoming Meeting Notes.... Page
More informationSeptember 2017 Chainsaw Superhero Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners
September 2017 Chainsaw Superhero Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners Chips & Bits September 2017 After all is said and done
More informationPeace River Woodturners
Peace River Woodturners Volume 8 Issue 9 A chapter of the American Association of Woodturners September 2015 Norm s Sample bowl for his demonstration. In This Issue Norm explaining his demonstration of
More informationWoodCentral's Tool Grinds Page
WoodCentral's Tool Grinds Page Here are some photos of lathe tool grinds submitted by our Turning forum visitors. It is our suspicion that there are as many grinds as there are turners, and that a skilled
More informationJuly 19. Newsletter of the Treasure Coast Woodturning Guild June In this issue:
1 Treasure Coast Woodturners 7/10/2013 An Affiliate Chapter of the American Association of Woodturners In this issue: Newsletter of the Treasure Coast Woodturning Guild June 2013 Letter from the President
More informationTurn North NW Tower Drive Platte Woods Mo The Monthly Newsletter of the Northland Woodturners.
Turn North The Monthly Newsletter of the Northland Woodturners www.northlandwoodturners- 2014 Officers Dave Halter, President (816) 233-9606 Herknav@ponyexpress.net David Bartlett, Vice President (816)
More informationNews And Views for February And March 2019
News And Views for February And March 2019 Hail Hail the gang is almost here, by rough count we had a high number of attendees at the February meeting, 48 to be exact. Well done, it gave for great participation,
More informationSouth Central Pennsylvania Wood Turners Club
South Central Pennsylvania Wood Turners Club 18 Water Street, Jacobus, PA 17407 President Bill Krofft wkrofft@hotmail.com (724) 504-5565 Vice-President Tom Deneen Tomdeneen@emailaccount.com (717) 927-9004
More informationThe Wood Spinner. You Never Know What will Show up at show & tell! this issue Presidents Corner P.2 Meeting Minutes P.3 Your Club P.
v The Wood Spinner You Never Know What will Show up at show & tell! this issue Presidents Corner P.2 Meeting Minutes P.3 Your Club P. 5 Visit to Kirk McCauley s Shop P.6 Skills Day P. 7 Show & Tell P.9
More informationECHOES FROM THE BAT CAVE
ECHOES FROM THE BAT CAVE January 2019 Tom Huber - Ornament Turning Tom Huber of the Capital Area Woodworkers (CAW) was our demonstrator for January. Tom showed us how to turn lighthouse and snowman ornaments.
More informationThe York Woodworkers Association
The York Woodworkers Association Newsletter for February 4, 2019 Turning A Bowl From A Log Greetings all and welcome to the February 2019 club newsletter. If you have suggestions for improvements, please
More informationBetween Turns. August Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V
More informationTri-County Wood Turners Minutes for the January 2017 Meeting
Tri-County Wood Turners Minutes for the January 2017 Meeting The meeting opened with club president Art Worth the leading the pledge of allegiance. John Williams provided the club with a short prayer.
More informationOctober There are two kinds of pedestrians: the quick and the dead. Anonymous
October 2014 Find me on facebook! http://www.facebook.com/lyle.jamieson1 Please include your location if you write in with comments or questions. Please feel free to forward this newsletter on and don
More informationBenoit Averly Demo # Eli Avisera Demo #1 Demo #2 Demo #3 Demo #4 Demo #5 Demo #6 Richard Findley Demo 1 Demo 2 Demo Demo
Benoit Averly Demo #1 Little Boxes with a French Accent How to turn little boxes using the skew a the main tool. Demo #2 Hut and Flat Boxes Turning larger hut and flat boxes. This is the next step. The
More informationVolume 9, Number 6 January 2018
www.gfturners.org Volume 9, Number 6 January 2018 A Few Word s. I want to thank the following members who stepped up to provide demos during the year: Dirk Johnson Four Times Sam Sampedro Three Times Chuck
More informationCape Cod Woodturners Minutes and News October 7, 2015
Cape Cod Woodturners Minutes and News October 7, 2015 Vice president Jim Silva welcomed 23 members and guests to the meeting. End grain sealer, sandpaper, and CA glue is available from the club for purchase.
More informationVolume 1 October, 2017
Volume 1 October, 2017 Dave Rife Next regular meeting, Saturday November 11, 2017 at the Traverse Bay Area Intermediate School District at 880 Parsons Road, Traverse City, MI. Rolls Chuck Vernon Coffee
More informationOne Good Turn. Coulee Region WoodTurners. Chapter of the American Association of WoodTurners.
One Good Turn Coulee Region Woodturners Chapter of the American Association of WoodTurners Www.crwoodturner.com Happy New Year Everyone! Thank you to our past officers, and welcome to new officers who
More informationEchoes from the BAT. Inside this month s BAT Cave. Details inside. Bill Henry Kicks off October Meeting. November 50/50 Raffle One Lucky Winner
Echoes from the BAT November 11, 2009 Volume 4, Issue 11 Inside this month s BAT Cave Bill Henry Kicks off October Meeting 2009 Officers President Bill Henry Vice President Keith Holt November 50/50 Raffle
More informationPLEASE NOTE BWWT MEETINGS ARE NOW HELD ON THE SECOND SAT- URDAY OF EACH MONTH BE- GINNING AT 9:00 AM
Contains November 2011 Minutes December 2011 PLEASE NOTE BWWT MEETINGS ARE NOW HELD ON THE SECOND SAT- URDAY OF EACH MONTH BE- GINNING AT 9:00 AM BUCKEYE WOODWORKERS AND WOODTURNERS Nov. 12, 2011 The regular
More informationAugust Newsletter. * * * * * * * * * * * * * * * NEXT MEETING: FUTURE DEMONSTRATORS:
www.ptwoodturners.org Newsletter August 2007 www.woodturner.org NEXT MEETING: August 7 th Dennis Ross Turning Spheres FUTURE DEMONSTRATORS: September 4 th Lan Brady Making Your Own Tools October 2 nd Used
More informationBWWT MEETING MINUTES SATURDAY MARCH 12, 2016
Contains March 2016 Minutes April, 2016 NO MEMBERS OR VISITORS SHALL EN- TER OR EXIT THE CAMP VIA THE CHRISTMAN ROAD ENTRANCE. MEM- BERS MUST ENTER AND EXIT FROM MT.PLEASANT ROAD. BUCKEYE WOODWORKERS AND
More informationMinutes/Newsletter of Space Coast Woodturners January 14, 2015
Minutes/Newsletter of Space Coast Woodturners January 14, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson
More informationPresident s Message By Bob Clark
January 2010 Newsletter Volume 9 Issue 6 Newsletter of the Antelope Valley Woodturners Association 2535 E. Ave. R-3, Palmdale, CA. 93550 Member of the American Association of Woodturners President Bob
More informationMortar and Pestle. January The monthly newsletter of the Inland Woodturners. A Member of the American Association of Woodturners
A Member of the American Association of Woodturners January 2011 Inside this issue: Mortar & Pestle Demo 1 Officers 2 Monthly Challenge, Wood Raffle, Show and Tell Mortar & Pestle Demo (continued)) Richard
More informationCumberland Woodturners
CUMBERLAND WOODTURNERS NEWSLETTER! FEB 2013 Cumberland Woodturners A Chapter of AAW since 1997 www.cumberlandwoodturners.com CLUB INFORMATION President: Rod Smith Vice President: John Lucas Secretary:
More informationPresentation Summary: February
Officers for 2019 President Jeff Foro Secretary Richard Bumgarner Vice President Lynn Taylor Treasurer Jackie Le Doux Presentation Summary: February Dick gave us a detailed look at tool edges, and why
More informationBuilding a shaft less Crush/Grind Pepper mill Chuck Ellis
Building a shaft less Crush/Grind Pepper mill Chuck Ellis First off, I don t want you guys laughing at my drawing I m a better turner than I am a graphic artist. This is a rough sketch very rough of my
More informationTurning a CrushGrind shaft grinder without using glue
Turning a CrushGrind shaft grinder without using glue A step-by-step approach to removing the apprehension 1 Chris West Content Introduction 3 Robert Sorby CrushGrind Recess Cutting Tool 4 Required tools
More informationA Member of the American Association of Woodturners
A Member of the American Association of Woodturners April 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Candle Stick Holder Written by Larry Cooper Photos by Larry Cooper
More informationMinutes/Newsletter of Space Coast Woodturners April 8, 2015
Minutes/Newsletter of Space Coast Woodturners April 8, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson
More informationMainiac Woodturner Monthly Newsletter of the Maine Chapter of the AAW
Mainiac Woodturner Monthly Newsletter of the Maine Chapter of the AAW September Demo: Beth Ireland September 15, 7 p.m., Erskine Academy Folks, we have here either a true likeness of Beth Ireland or a
More informationWood Chips LOCAL AAW CHAPTER
August 2008 Wood Chips www.kcwoodturners.org LOCAL AAW CHAPTER Officers President: Richard Davis 913-424-5813 president@ kcwoodturners.org Vice President: Jim Reynolds 913-441-0997 vp@kcwoodturners.org
More informationTIPS & TECHNIQUES Topic of the Month: Reminder of 3 reach capabilities needed
I used to eat a lot of natural foods until I learned that most people die of natural causes. Author unknown Find me on Facebook! http://www.facebook.com/home.php?#!/profile.php?id=10 0000091394781&ref=ts
More informationJimmy Clewes Masterclass - Cheam Woodturners 10th November 2013
This demonstration was the first time in 6 years that Jimmy has demonstrated in the UK. He pointed out that the techniques he uses are his alone, that it is important to enjoy woodturning and do whatever
More informationDave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting.
APRIL 2013 April 17th Dave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting. This is an informal gathering at Dave's shop to socialize and see the shop. David
More informationECHOES FROM THE BAT CAVE
ECHOES FROM THE BAT CAVE Bowl From a Board - Joe Kramer March 2019 Joe Kramer, from Chesapeake Woodturners was our demonstrator for March. Joe presented his techniques for creating a bowl from a board,
More informationHope to see a bunch of you folks at the AAW Symposium in Pittsburg. It will be a BIG event!
May-June 2015 Find me on facebook! http://www.facebook.com/lyle.jamieson1 Subscribe to my YouTube channel http://www.youtube.com/user/jamiesonlyle Please include your location if you write in with comments
More informationShavings. A monthly publication of: New Mentoring leader. Ray Frase is the new director
May Shavings June 2010 A monthly publication of: Special points of interest: June and July AAW give aways Advantages of AAW membership. Free gifts Jennifer Shirley demo recap New Mentoring leader Ray Frase
More informationPEPPERMILL CONSTRUCTION
PEPPERMILL CONSTRUCTION I ve been asked a several times to put together a review of how I turn peppermills. They are a great project, perfect for gifts and a lot of fun to make. They don't require especially
More informationAlabama Woodturners Association. A member of the American Association of Woodturners
Alabama Woodturners Association January 2013 Coming Events 2013 January -Mike Peace February -Mark Sillay March-Maurice Clabaugh April Jim Greenwood* May-Round Robin June - Nelson Brooks* July -Joe Wujcik*
More informationSpindle Roughing. If you ve limited the use of this tool to knocking the corners off stock, you ve missed some sweet turning experiences.
Spindle Roughing 1½" ¾" ½" GougeBy Bob Rosand ½" Next to the small round skew that I use, the gouge (SRG) just might be my favorite woodturning tool. Most people just use this tool to knock the corners
More informationStar Chapter Member of the American Association of Woodturners TURNING
Star Chapter Member of the American Association of Woodturners TURNING Hands-on Session of Space Coast Woodturners July 21, 2012 Tom Weber Demonstration - How to make a Small Clock. Submitted by Dotty
More informationJanuary The next meeting is January 10, 2013
The next meeting is January 10, 2013 "Look into the garden, Where the grass was green; Covered by the snowflakes, Not a blade is seen. - Ezra Pound January 2013 Newsletter Our Guild meets the second Thursday
More informationA Publication of the Mid Minnesota Association of Woodturners
A Publication of the Mid Minnesota Association of Woodturners Volume 8, Issue 8 August 1, 2018 The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization, providing
More informationOFFSET TURNINGS. By using an eccentric chuck, SHOPMADE CHUCK BUILD A FOR. David Mueller FEATURE. Build the chuck body
FEATURE BUILD A SHOPMADE CHUCK FOR OFFSET TURNINGS David Mueller By using an eccentric chuck, you can add interest to turnings such as pendants and box lids. The workpiece is mounted out of alignment with
More informationJimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver.
Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver. He started by roughing out the block with a roughing
More informationBand Saw Safety. Shavings-Newsletter of the Quad Cities Woodturners Association
Shavings-Newsletter of the Quad Cities Woodturners Association Band Saw Safety Quad City Wood Turners Volume 5, Issue 2 Feb 2010 Inside this issue: Chri 1 2-3 Critique Table 4-5 Demo Candlesticks 6 Demo
More informationWhen: Saturday Sept. 16, Starts after a brief meeting that begins at 9:00 AM. Ends at noon (or later if necessary).
Hi to all, Labor Day 2017 is in the history books so summer is officially over. I don t know about y all, but my September and October calendar is full. This is going to be more of a short book than a
More informationTristan s Corner: Hopefully everyone stayed dry last month! I think we might get some drier weather soon.
SOUTHCOAST WOODTURNERS NEWSLETTER News of the South Coast Woodturner s Club A Chapter of the American Association of Woodturner s SouthCoastWoodturners (www.southcoastwoodturners.com) April 8, 2017 Meeting
More informationOne Good Turn. Coulee Region Woodturners. Chapter of the American Association of WoodTurners.
One Good Turn Coulee Region Woodturners Chapter of the American Association of WoodTurners Www.crwoodturner.com A big thank you to Clyde Cassell for hosting our meeting in August. What a wonderful location
More informationMichael Werner July 19, 2008 Demonstration By Bob Gunther Photographs by Tina Collison and Dave Vizard
Michael Werner July 19, 2008 Demonstration By Bob Gunther Photographs by Tina Collison and Dave Vizard Overview: Michael Werner was born and grew up in Switzerland. Making things was a family tradition
More informationWHAT WAS THE BEST THING BEFORE SLICED BREAD?
October 2013 Find me on facebook! http://www.facebook.com/home.php?#!/profile.php?id=100000091394781&ref=ts Please include your location if you write in with comments or questions. Please feel free to
More informationBetween Turns. March Burning Demonstration... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Michigan Association of Woodturners A chapter of the American Association of Woodturners V O L U M E 2 2, I S S U E
More informationNovember George Raeder is Oct. demonstrator
November 2005 George Raeder is Oct. demonstrator By Jerry Schaibles The demonstration this month was given by George Raeder on the turning of Christmas ornaments. He designed and turned two ornaments,
More informationChips & Bits. Peace River Woodturners. Meeting Annncements. Frank Bauer s Spin Top turning demonstration
Chips & Bits Peace River Woodturners Volume 8 Issue 10 A chapter of the American Association of Woodturners October 2015 President: Contact Us Norman Desjardins: 941-613-0245 Vice President: Bob Moran:
More informationVolume 8, Number 4 January 2017
The following Demo Dates are still unfilled and are available for you: March 7 May 20 June 6 July 15 www.gfturners.org Volume 8, Number 4 January 2017 Turn a Top Dec 17 On Saturday Dec 17 a few of the
More informationTABLE OF CONTENTS PRESIDENT S MESSAGE. NC Woodturners. Newsletter 18 of 24...
NC Woodturners PRESIDENT S MESSAGE Newsletter 18 of 24... Wow 3/4 of the way through a 2-year term as your club president. With that being said, nominations for officers and board members are open for
More informationTURING BOWLS AND PLATTERS 2014 ARROWMONT CLASS JIM PERRIELLO
TURING BOWLS AND PLATTERS 2014 ARROWMONT CLASS JIM PERRIELLO 1. Glenn Lucas Instructor and Greg Schramek {Asheville, NC} assistant. a. Glenn Lucas is an Irish woodturner who is recognized as a master woodturner.
More informationTABLE OF CONTENTS PRESIDENT S MESSAGE. Newsletter 13 of 24
PRESIDENT S MESSAGE Newsletter 13 of 24 I hope everyone had a wonderful and joyous Christmas holiday. 2017 is in the books and on to a brighter, healthier, and safer 2018. If you missed the Christmas party,
More informationLegacy Magnet Pen Kit
Description: The Magnet pen model is a variation of the Slimline pen and considered one of the most basic pen kits and is a great starter kit for those new to pen turning. Sometimes called the Refrigerator
More informationECHOES FROM THE BAT CAVE
ECHOES FROM THE BAT CAVE Pen Turning Demo - Tom Szarek / Louis Harris Our very own Tom Szarek and Louis Harris demonstrated pen turning for the February meeting. Tom and Louis are coordinating a club service
More informationMATERIALS & TOOLS REQUIRED INTRODUCTION. Before you start turning, read and understand this entire procedure.
INTRODUCTION This set of instructions shows one method to turn mills.there are many other possible variations and techniques. NOTE: These instructions are specific to 'Chef Specialties' mechanism. For
More informationPublic Demonstrations & Exhibitions
Public Demonstrations & Exhibitions FUSION Exhibition at Limerick City Hall Vessels including pottery, metal work, Woodturning Exhibition at Foynes Library Display at Limerick County Council, Dooradoyle
More informationINSIDE THIS EDITION. Bowls for Feed My People. President s Notes and Meeting Minutes Page 2. Hyde Center Page 3. February Demo Between Centers
Bowls for Feed My People INSIDE THIS EDITION President s Notes and Meeting Minutes Page 2 Hyde Center Page 3 February Demo Between Centers Page3 Regional Woodturning Events Page 4 President s Challenge
More informationEchos From the BAT. Cave. David Ellsworth. Baltimore Area Turners. Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6.
Echos From the BAT Baltimore Area Turners Cave March, 2012 David Ellsworth Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6 2012 Officers: In March, BAT was graced with a visit by Grandmaster
More informationPerhaps the best thing about. Three bowls slightly rearranged Twisted Possibilities
Three bowls slightly rearranged Twisted Possibilities By Malcolm Tibbetts Lacewood Ribbon, 13 7½" Perhaps the best thing about segmented turning is the total lack of restrictions; there is no end to the
More informationTurning an End Grain Lidded Box
Turning an End Grain Lidded Box by Michael Stafford Copyright 2006 All Rights Reserved 1 Turning an End Grain Lidded Box Turning an end grain lidded box differs from face grain bowl turning primarily in
More informationVASE FLYING-WING A BARK-EDGED. Kevin Felderhoff. Wood selection. 36 American Woodturner August 2017
A BARK-EDGED FLYING-WING VASE Kevin Felderhoff I enjoy turning endgrain pieces and have found that the most dramatic wood grain comes from logs or branches with irregular shapes far from round. The flying-wing
More informationNorth East Florida Woodturners
North East Florida Woodturners Volume 17 Issue 9 September 2017 An Affiliate of the American Association of Woodturners Club Number 130 - jaxturners.org President s Message In order for an organization
More informationJam Chucks and Holding devices
A Member of the American Association of Woodturners October 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Jam Chucks and Holding devices Written by Larry Cooper Photos
More informationJOINIf woodturning is your relaxation, your passion, your art,
7 252 74 882 47 2 14 > Page 40 Page 24 7 252 74 882 47 2 11 > Page 30 Page 20 page 40 Page 40 Page 18 Page 1 7 252 74 882 47 2 13 > Page 18 JOINIf woodturning is your relaxation, your passion, your art,
More informationEchos From the BAT Cave
Echos From the BAT Cave Baltimore Area Turners February, 2014 Hands-On, Jerry Kermode, ACC Between blizzards, BAT had a busy month. Starting with a hands-on session, continuing with a Jerry Kermode turning
More informationChristmas Bell Ornament
Christmas Bell Ornament This is an easy Christmas ornament idea I cabbaged from a friend and skilled turner, Curt Fuller, from Utah. I kind of adapted it to my style but I still got the idea from him.
More informationBetween Centers Club established
Newsletter of Ozark Woodturners Between Centers Club established 1995 http://www.ozarkwoodturners.com 2015 Officers President: Joe Parks 870-307-8842 Vice President: Jerry Hankins 479-857-3980 Treasurer:
More informationAugust 6, The demonstrator will be Steve Cook.
www.brasstownwoodturners.org Next meeting is: Terrence Powell BWG News Editor terrence.powell1963@gmail.com August 6, 2016. The demonstrator will be Steve Cook. $10 fee at the door to all attending Steve
More informationBetween Turns. Michigan Association of Woodturners. Volume 19 Issue 3 A chapter of the American Association of Woodturners March 2007
Between Turns Michigan Association of Woodturners Volume 19 Issue 3 A chapter of the American Association of Woodturners March 2007 President: Contact Us Tom Mogford 810-629-6176 Vice President: Pete Buccellato
More informationNorthern Rockies Woodworking Guild
Northern Rockies Woodworking Guild March 31, 2018 NRWG.org Volume 13, Issue 7 Officers President Jurgen Weiel Vice President Jarred McDaniel Treasurer Boyd Carson Secretary Dean Center Next Meeting Tuesday,
More information