Ordering number : ENA196A CPH9 N-Channel JFET V, to 4mA, 4mS, CPH http://onsemi.com Applications For AM tuner RF amplification Low noise amplifier Features VGDS: -V max. yfs : 4mS typ. Ciss: 6.pF typ. NF:.1dB typ. Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSX V Gate-to-Drain Voltage VGDS -- V Gate Current IG ma Drain Current ID ma Allowable Power Dissipation PD 4 mw Junction Temperature Tj 1 C Storage Temperature Tstg -- to +1 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) 1A-.8.6 1.6.6.9. 1.9.9.4.1.. 1 : Source : Drain : Gate CPH CPH9-TL-E Product & Package Information Package : CPH JEITA, JEDEC : SC-9, TO-6, SOT- Minimum Packing Quantity :, pcs./reel Packing Type: TL TL Electrical Connection Marking J LOT No. 1 Semiconductor Components Industries, LLC, 1 August, 1 611 TKIM/11AC TKIM TC-694 No. A196-1/6
CPH9 Electrical Characteristics at Ta= C Parameter Symbol Conditions Ratings min typ max Unit Gate-to-Drain Breakdown Voltage V(BR)GDS IG=--μA, VDS=V -- V Gate Cutoff Current IGSS VGS=--V, VDS=V --1. na Cutoff Voltage VGS(off) VDS=V, ID=μA --.6 --1. --1.8 V Drain Current IDSS VDS=V, VGS=V 4 ma Forward Transfer Admittance yfs VDS=V, VGS=V, f=1khz 4 ms Input Capacitance Ciss VDS=V, VGS=V, f=1mhz 6. pf Reverse Transfer Capacitance Crss VDS=V, VGS=V, f=1mhz. pf Noise Figure NF VDS=V, VGS=V, f=mhz.1.8 db Ordering Information Device Package Shipping memo CPH9-TL-E CPH,pcs./reel Pb Free ID -- VDS 4 ID -- VDS V GS =V VGS =V 1 --.V --.4V --.6V --.8V --1.V. 1. 1.. Drain-to-Source Voltage, V DS -- V IT1668 ID -- VGS V DS =V 4 1 --.V --.4V --.6V --.8V --1.V 4 6 8 Drain-to-Source Voltage, V DS -- V IT16688 ID -- VGS V DS =V 4 4 1 IDSS=4mA ma ma 4 1 Ta= -- C C C --. --1. --1. --.. Gate-to-Source Voltage, V GS -- V IT16689 --. --1. --1. --.. Gate-to-Source Voltage, V GS -- V IT1669 No. A196-/6
CPH9 Forward Transfer Admittance, yfs -- ms Cutoff Voltage, V GS (off) -- V 1. V DS =V f=1khz I DSS =ma yfs -- ID yfs -- IDSS 1. 1. IT16691 VGS(off) -- IDSS V DS =V I D =μa Forward Transfer Admittance, yfs -- ms -- pf Input Capacitance, Ciss Drain Current, I DSS -- ma Ciss -- VDS V DS =V V GS =V f=1khz IT1669 V GS =V f=1mhz -- pf Reverse Transfer Capacitance, Crss.1 IT1669 Drain Current, I DSS -- ma Crss -- VDS V GS =V f=1mhz Allowable Power Dissipation, P D -- mw 1. 1. Drain-to-Source Voltage, V DS -- V IT16694 PD -- Ta 4 4 1 1. 1. Drain-to-Source Voltage, V DS -- V IT1669 4 6 8 1 14 16 Ambient Temperature, Ta -- C IT16696 No. A196-/6
CPH9 Embossed Taping Specification CPH9-TL-E No. A196-4/6
CPH9 Outline Drawing CPH9-TL-E Land Pattern Example Mass (g) Unit.1 * For reference mm Unit: mm.6.4 1.4.9.9 No. A196-/6
CPH9 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A196-6/6