M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.

Similar documents
MCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC. SS220-L THRU. Features. 2 Amp Schottky Rectifier 20 to 200 Volts DO-214AC (SMA) (LEAD FRAME) Maximum Ratings

M C C 3EZ5.1D5 THRU 3EZ75D5. Features. 3 W Glass Passivated Junction Silicon Zener Diode Volts. Mechanical Data DO-15

M C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt

MCC. BC846AW/BW BC847AW/BW/CW BC848AW/BW/CW. Features. NPN General Purpose Transistors. Maximum Ratings SOT-323

omponents Marilla Street Chatsworth Watts

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG

Micro Commercial Components Marilla Street, Chatsworth, CA91311 Tel: Fax: Process Change Notification.

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG


M C C. Revision: B 2016/10/10 MCQ4503 SOP-8. Features Halogen free available upon request by adding suffix "-HF"

omponents Marilla Street Chatsworth nadc Vdc ms

ICTE5.0 THRU ICTE15C SERIES

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE

MCC. MMDT3904V

MCC BC558A/B/C. Features. PNP Silicon Amplifier Transistor 625mW

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)

MCC. 2N5401 )HDWXUHV. PNP Silicon Amplifier Transistor 625mW 0HFKDQLFDO'DWD TO-92

Surface Mount Transient Voltage Suppressors (TVS)

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS

P6KE SERIES Taiwan Semiconductor

M C C. MCAC48N10Y. Features. N-Channel Power MOSFET DFN5060. C Unless Otherwise Specified. Micro Commercial Components

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

M C C. Revision: A 2016/02/07 MCMNP517 DFN2020-6U

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction

BZW04 SERIES Taiwan Semiconductor

GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series

SA SERIES Taiwan Semiconductor

DEVICES FOR BIPOLAR APPLICATIONS

P4KE SERIES Taiwan Semiconductor

BZW06 SERIES Taiwan Semiconductor

Rev. 02

V GS =0V,I D =10µA V DS = 20V, V GS =0V V GS = -8V, V DS =0V. V GS =V DS,I D =50µA V GS = 4.5V, I D = 3.6A V GS = 2.5V, I D = 3.1A V DS =5V,I D = 3.

Micro Commercial Components Marilla Street Chatsworth. Watts

M C C. MCAC80N06Y. Features. N-Channel Power MOSFET DFN5060. Maximum 25 O. C Unless Otherwise Specified

M C C. SI2301A. Features. P-Channel Enhancement Mode Field Effect Transistor SOT-23. Internal Block Diagram

Surface Mount TRANSZORB Transient Voltage Suppressors

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

M C C. SI2302A. Features. N-Channel Enhancement Mode Field Effect Transistor SOT-23. Internal Block Diagram

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor

6600W, 10V 43V Surface Mount Transient Voltage Suppressor

Micro Commercial Components MCP140N10Y N-Channel Enhancement Mode Field Effect Transistor TO-220 Symbol Parameter Rating Unit 1 2 3

Transient Voltage Suppressors (TVS) Data Sheet

General Purpose Plastic Rectifier

Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel

FAIRCHILD TVS Is Now Part of

5000W, 16V - 100V Surface Mount Transient Voltage Suppressor

400W, 10V - 100V Surface Mount Transient Voltage Suppressor

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data

Transient Voltage Suppressors (TVS) Data Sheet

Green. Case Material: Molded Plastic. UL Flammability Classification 3.3V - 200V Nominal Zener Voltage Range

Surface Mount TRANSZORB Transient Voltage Suppressors

MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product

Surface Mount TRANSZORB Transient Voltage Suppressors

MSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.

1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description

Symbol Description Value Unit Conditions. Minimum 600

SMB10J SERIES Taiwan Semiconductor

M C C. MT110C08T1 MT110C12T1 MT110C16T1 MT110C18T Amp THYRISTOR MODULE. Features. 800~1800 Volts. Applications.

M C C. MT200C08T2 MT200C12T2 MT200C16T2 MT200C18T Amp THYRISTOR MODULE. Features. 800~1800 Volts. Applications.

FAIRCHILD TVS Is Now Part of

1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description

M C C. MT200CB18T2 MT200CB16T Amp THYRISTOR/DIODE. Features. MODULE 800~1800 Volts. Applications. Circuit

1.5SMC6.8AT3 Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional

Green T-DFN Part Number Compliance Case Packaging LBS10-13 Commercial T-DFN ,000/Tape & Reel

SOD123. Top View. M5X = Product Type Marking Code YM = Date Code Marking Y = Year (ex.: E = 2017) M = Month (ex: 9 = September)

Green. Top View Pin Diagram Internal Schematic. Part Number Case Packaging MSB12M-13 MSB 3,000/Tape & Reel

High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

P6SMB11CAT3G Series, SZP6SMB11CAT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional*

Green. Part Number Case Packaging SBRT3U60SAF-13 SMAF 10,000/Tape & Reel

China - Germany - Korea - Singapore - United States - smc-diodes.com

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

Green. Bottom View. Top View. Part Number Compliance Case Packaging SDT3A45SA-13 Commercial SMA 5,000/Tape & Reel

Surface Mount Silicon Zener Diodes

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors

B3XXAE B320AE-B345AE. Product Summary. Features and Benefits. Mechanical Data. Description and Applications NEW PRODUCT. Ordering Information (Note 4)

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional

MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note T L = 2 C, Pulse Width = ms P PK 600 W DC Power T L = 7 C Meas

General Purpose Plastic Rectifier

3000W, 10V - 100V Surface Mount Transient Voltage Suppressor

ADVANCED INFORMATION

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

400W, 5V - 188V Surface Mount Transient Voltage Suppressor

Green. Part Number Compliance Case Packaging DBF Commercial DBF 3,000/Tape & Reel

Green. Pin Diagram. Part Number Compliance Case Packaging MSB30M-13 Commercial MSBL 2,500/Tape & Reel

PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional

Green SMC. Top View Bottom View. Part Number Case Packaging B5XXCE-13 SMC 3,000/Tape & Reel

ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

Transcription:

omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Low profile package Fast response time: typical less than 1.0ps from 0 volts to VBR minimum Halogen free available upon request by adding suffix "-HF" Low inductance Excellent clamping capability UL Recognized File # E480232 Mechanical Data Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotesposit ive end (cathode) except Bidirectional Maximum soldering temperature: 260 o C for seconds Maximum Ratings @ 25 o C Unless Otherwise Specified Peak Pulse Current on /0us waveform See Table 1 Note: 2 Peak Pulse Power Dissipation P PP 1500W Note: 2 3 Operation And Storage T J, T STG Temperature Range -55 o C to +175 o C Typical Thermal Resistance Junction RthJL 15 o C/W to Lead Typical Thermal RthJA O 75 C/W Resistance Junction to Ambient Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt DO-214AB (SMC) (LEAD FRAME) G F D E DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A.079.3 2.00 2.62 B.8.128 2.75 3.25 C.002.008 0.051 0.203 D.006.012 0.152 0.305 E.030.060 0.76 1.52 F..305.320 7.75 8.13 G.260.280 6.60 7.11 H.220.245 5.59 6.22 SUGGESTED SOLDER PAD LAYOUT 0.190 H A B C 0.125 NOTES: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 2. Non-repetitive current pulse, per Fig.3 and derated above T A =25 o C per Fig.2. 3. Mounted on 8.0mm 2 copper pads to each terminal. 0.070 Revision: G 1 of 5 2015/12/30

ELECTRICAL CHARACTERISTICS @25 C MCC PART NUMBER STAND-OFF VOLTAGE V WM BREAKDOWN VOLTAGE V (BR) @ I T (VOLTS) CLAMPING VOLTAGE @ PEAK PULSE CURRENT LEAKAGE @V WM I D MARKING CODE (VOLTS) MIN MAX I T (ma) (VOLTS) (AMPS) (µa) SMCJ1.5KE6.8A 5.80 6.45 7.14.5 144.8 0 6V8A SMCJ1.5KE7.5A 6.40 7.13 7.88 11.3 134.5 500 7V5A SMCJ1.5KE8.2A 7.02 7.79 8.61 12.1 125.6 200 8V2A SMCJ1.5KE9.1A 7.78 8.65 9.55 1 13.4 113.4 50 9V1A SMCJ1.5KEA 8.55 9.50.50 1 14.5 4.8 A SMCJ1.5KE11A 9.40.50 11.60 1 15.6 97.4 5 11A SMCJ1.5KE12A.20 11.40 12.60 1 16.7 91.0 5 12A SMCJ1.5KE13A 11. 12.40 13.70 1 18.2 83.5 5 13A SMCJ1.5KE15A 12.80 14.30 15.80 1 21.2 71.7 5 15A SMCJ1.5KE16A 13.60 15.20 16.80 1 22.5 67.6 5 16A SMCJ1.5KE18A 15.30 17. 18.90 1 25.5 60.3 5 18A SMCJ1.5KE20A 17. 19.00 21.00 1 27.7 54.9 5 20A SMCJ1.5KE22A 18.80 20.90 23. 1 30.6 49.7 5 22A SMCJ1.5KE24A 20.50 22.80 25.20 1 33.2 45.8 5 24A SMCJ1.5KE27A 23. 25.70 28.40 1 37.5 40.5 5 27A SMCJ1.5KE30A 25.60 28.50 31.50 1 41.4 36.7 5 30A SMCJ1.5KE33A 28.20 31.40 34.70 1 45.7 33.3 5 33A SMCJ1.5KE36A 30.80 34.20 37.80 1 49.9 30.5 5 36A SMCJ1.5KE39A 33.30 37. 41.00 1 53.9 28.2 5 39A SMCJ1.5KE43A 36.80 40.90 45.20 1 59.3 25.6 5 43A SMCJ1.5KE47A 40.20 44.70 49.40 1 64.8 23.5 5 47A SMCJ1.5KE51A 43.60 48.50 53.60 1 70.1 21.7 5 51A SMCJ1.5KE56A 47.80 53.20 58.80 1 77.0 19.7 5 56A SMCJ1.5KE62A 53.00 58.90 65. 1 85.0 17.9 5 62A SMCJ1.5KE68A 58. 64.60 71.40 1 92.0 16.5 5 68A SMCJ1.5KE75A 64. 71.30 78.80 1 3.0 14.8 5 75A SMCJ1.5KE82A 70. 77.90 86. 1 113.0 13.5 5 82A SMCJ1.5KE91A 77.80 86.50 95.50 1 125.0 12.2 5 91A SMCJ1.5KEA 85.50 95.00 5.00 1 137.0 11.1 5 A SMCJ1.5KE1A 94.00 5.00 116.00 1 152.0.0 5 1A SMCJ1.5KE120A 2.00 114.00 126.00 1 165.0 9.2 5 120A SMCJ1.5KE130A 111.00 124.00 137.00 1 179.0 8.5 5 130A SMCJ1.5KE150A 128.00 143.00 158.00 1 207.0 7.3 5 150A SMCJ1.5KE160A 136.00 152.00 168.00 1 219.0 6.9 5 160A SMCJ1.5KE170A 145.00 162.00 179.00 1 234.0 6.5 5 170A SMCJ1.5KE180A 154.00 171.00 189.00 1 246.0 6.2 5 180A SMCJ1.5KE200A 171.00 190.00 2.00 1 274.0 5.5 5 200A SMCJ1.5KE220A 185.00 209.00 231.00 1 328.0 4.6 5 220A SMCJ1.5KE250A 214.00 237.00 263.00 1 344.0 4.4 5 250A SMCJ1.5KE300A 256.00 285.00 315.00 1 414.0 3.7 5 300A SMCJ1.5KE350A 300.00 332.00 368.00 1 482.0 3.2 5 350A SMCJ1.5KE400A 342.00 380.00 420.00 1 548.0 2.8 5 400A SMCJ1.5KE440A 376.00 418.00 462.00 1 602.0 2.5 5 440A SMCJ1.5KE480A 408.00 456.00 504.00 1 658.0 2.3 5 480A SMCJ1.5KE5A 434.00 485.00 535.00 1 698.0 2.1 5 5A SMCJ1.5KE530A 477.00 503.50 556.50 1 725.0 2.1 5 530A SMCJ1.5KE540A 459.00 513.00 567.00 1 740.0 2.0 5 540A SMCJ1.5KE550A 495.00 522.50 577.50 1 760.0 2.0 5 550A For bi-directional type having V rwm of volts and less, the I R limit is double. The available parts are A type only, the parts without A (V BR is %) is not available. 2 of 5

ELECTRICAL CHARACTERISTICS @25 C MCC PART NUMBER STAND-OFF VOLTAGE V WM BREAKDOWN VOLTAGE V (BR) @ I T (VOLTS) CLAMPING VOLTAGE @ PEAK PULSE CURRENT LEAKAGE @V WM I D MARKING CODE (VOLTS) MIN MAX I T (ma) (VOLTS) (AMPS) (µa) SMCJ1.5KE6.8CA 5.80 6.45 7.14.5 144.8 0 6V8C SMCJ1.5KE7.5CA 6.40 7.13 7.88 11.3 134.5 500 7V5C SMCJ1.5KE8.2CA 7.02 7.79 8.61 12.1 125.6 200 8V2C SMCJ1.5KE9.1CA 7.78 8.65 9.55 1 13.4 113.4 50 9V1C SMCJ1.5KECA 8.55 9.50.50 1 14.5 4.8 C SMCJ1.5KE11CA 9.40.50 11.60 1 15.6 97.4 5 11C SMCJ1.5KE12CA.20 11.40 12.60 1 16.7 91.0 5 12C SMCJ1.5KE13CA 11. 12.40 13.70 1 18.2 83.5 5 13C SMCJ1.5KE15CA 12.80 14.30 15.80 1 21.2 71.7 5 15C SMCJ1.5KE16CA 13.60 15.20 16.80 1 22.5 67.6 5 16C SMCJ1.5KE18CA 15.30 17. 18.90 1 25.5 60.3 5 18C SMCJ1.5KE20CA 17. 19.00 21.00 1 27.7 54.9 5 20C SMCJ1.5KE22CA 18.80 20.90 23. 1 30.6 49.7 5 22C SMCJ1.5KE24CA 20.50 22.80 25.20 1 33.2 45.8 5 24C SMCJ1.5KE27CA 23. 25.70 28.40 1 37.5 40.5 5 27C SMCJ1.5KE30CA 25.60 28.50 31.50 1 41.4 36.7 5 30C SMCJ1.5KE33CA 28.20 31.40 34.70 1 45.7 33.3 5 33C SMCJ1.5KE36CA 30.80 34.20 37.80 1 49.9 30.5 5 36C SMCJ1.5KE39CA 33.30 37. 41.00 1 53.9 28.2 5 39C SMCJ1.5KE43CA 36.80 40.90 45.20 1 59.3 25.6 5 43C SMCJ1.5KE47CA 40.20 44.70 49.40 1 64.8 23.5 5 47C SMCJ1.5KE51CA 43.60 48.50 53.60 1 70.1 21.7 5 51C SMCJ1.5KE56CA 47.80 53.20 58.80 1 77.0 19.7 5 56C SMCJ1.5KE62CA 53.00 58.90 65. 1 85.0 17.9 5 62C SMCJ1.5KE68CA 58. 64.60 71.40 1 92.0 16.5 5 68C SMCJ1.5KE75CA 64. 71.30 78.80 1 3.0 14.8 5 75C SMCJ1.5KE82CA 70. 77.90 86. 1 113.0 13.5 5 82C SMCJ1.5KE91CA 77.80 86.50 95.50 1 125.0 12.2 5 91C SMCJ1.5KECA 85.50 95.00 5.00 1 137.0 11.1 5 C SMCJ1.5KE1CA 94.00 5.00 116.00 1 152.0.0 5 1C SMCJ1.5KE120CA 2.00 114.00 126.00 1 165.0 9.2 5 120C SMCJ1.5KE130CA 111.00 124.00 137.00 1 179.0 8.5 5 130C SMCJ1.5KE150CA 128.00 143.00 158.00 1 207.0 7.3 5 150C SMCJ1.5KE160CA 136.00 152.00 168.00 1 219.0 6.9 5 160C SMCJ1.5KE170CA 145.00 162.00 179.00 1 234.0 6.5 5 170C SMCJ1.5KE180CA 154.00 171.00 189.00 1 246.0 6.2 5 180C SMCJ1.5KE200CA 171.00 190.00 2.00 1 274.0 5.5 5 200C SMCJ1.5KE220CA 185.00 209.00 231.00 1 328.0 4.6 5 220C SMCJ1.5KE250CA 214.00 237.00 263.00 1 344.0 4.4 5 250C SMCJ1.5KE300CA 256.00 285.00 315.00 1 414.0 3.7 5 300C SMCJ1.5KE350CA 300.00 332.00 368.00 1 482.0 3.2 5 350C SMCJ1.5KE400CA 342.00 380.00 420.00 1 548.0 2.8 5 400C SMCJ1.5KE440CA 376.00 418.00 462.00 1 602.0 2.5 5 440C SMCJ1.5KE480CA 408.00 456.00 504.00 1 658.0 2.3 5 480C SMCJ1.5KE5CA 434.00 485.00 535.00 1 698.0 2.1 5 5C SMCJ1.5KE530CA 477.00 503.50 556.50 1 725.0 2.1 5 530C SMCJ1.5KE540CA 459.00 513.00 567.00 1 740.0 2.0 5 540C SMCJ1.5KE550CA 495.00 522.50 577.50 1 760.0 2.0 5 550C For bi-directional type having V rwm of volts and less, the I R limit is double. The available parts are A type only, the parts without A (V BR is %) is not available. 3 of 5

Ratings and Characteristic Curves (TA = 25 C unless otherwise noted) PPPM Peak Pulse Power (kw) IPPM Peak Pulse Current, % IRSM 1 Fig. 1 Peak Pulse Power Rating Curve 0.1 0.1µs 1.0µs µs 150 50 0.31 x 0.31" (8.0 x 8.0mm) Copper Pad Areas t d Pulse Width (sec.) µs 1.0ms ms Fig. 3 Pulse Waveform tr = µsec. Peak Value IPPM T J = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM Half Value IPP IPPM 2 td 0 0 1.0 2.0 3.0 4.0 t Time (ms) /0µsec. Waveform as defined by R.E.A. Fig. 5 Typical Transient Thermal Impedance Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % CJ Junction Capacitance (pf) 75 50 25 0 20,000,000 1,000 Fig. 2 Pulse Derating Curve 0 25 50 75 125 150 175 200 T A Ambient Temperature ( C) Fig. 4 Typical Junction Capacitance Uni-Directional V R, Measured at Stand-Off Voltage, V WM Uni-Directional Bi-Directional Measured at Zero Bias T J = 25 C f = 1.0MHz Vsig = 50mVp-p 1 400 V WM Reverse Stand-Off Voltage (V) Transient Thermal Impedance ( C/W) 1.0 0.1 0.001 0.01 0.1 1 0 t p Pulse Duration (sec) 4 of 5

Ordering Information : Device Part Number-TP Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. 5 of 5