General Purpose Plastic Rectifier

Size: px

Start display at page:

Download "General Purpose Plastic Rectifier"

Hubert Stafford
5 years ago
Views:

1 General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J max. C FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 260 C, 40 s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. (Note: These devices are not Q qualified.) MECHANICAL DATA Case: DO-204AL, molded epoxy body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B2 E3 suffix for consumer grade, meets JESD 20 class A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (T A = C unless otherwise noted) PARAMETER SYMBOL N400 N4002 N4003 N4004 N4005 N4006 N4007 UNIT Maximum repetitive peak reverse voltage V RRM V Maximum RMS voltage V RMS V Maximum DC blocking voltage V DC V Maximum average forward rectified current 0.375" (9.5 mm) lead length at T A = 75 C I F(AV).0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM A Non-repetitive peak forward t p = ms 45 surge current square waveform t p = 2 ms I FSM 35 A T A = C (Fig. 3) t p = 5 ms Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length T L = 75 C I R(AV) µa Rating for fusing (t < 8.3 ms) () I 2 t 3.7 A 2 s Operating junction and storage temperature T J, T STG - to + C Note: () For device using on bridge rectifier application

2 N400 thru N4007 ELECTRICAL CHARACTERISTICS (T A = C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL N400 N4002 N4003 N4004 N4005 N4006 N4007 UNIT Maximum instantaneous forward voltage.0 A V F. V Maximum DC reverse current at rated DC blocking voltage T A = C T A = C I R Typical junction capacitance 4.0 V, MHz C J 5 pf 5.0 µa THERMAL CHARACTERISTICS (T A = C unless otherwise noted) PARAMETER SYMBOL N400 N4002 N4003 N4004 N4005 N4006 N4007 UNIT Typical thermal resistance () R θja R θjl Note: () Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE N4004-E3/ " diameter paper tape and reel N4004-E3/ Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (T A = C unless otherwise noted) Average Forward Rectified Current (A) x 0.2" (5.0 x 5.0 mm) Copper Pads 60 Hz Resistive or Inductive Load " (9.5 mm) Lead Length Junction Temperature ( C) Peak Forward Surge Current (A) 20 5 T A = 75 C 8.3 ms Single Half Sine-Wave 5 0 Number of Cycles at 60 Hz Figure. Forward Current Derating Curve Figure 2. Maximum Non-repetitive Peak Forward Surge Current 2

3 Instantaneous Forward Current (A) Peak Forward Surge Current (A) N400 thru N t p t p = ms t p = 2 ms t p = 5 ms Junction Capacitance (pf) 0 f =.0 MHz V sig = mvp-p 5 square waveform 75 0 Ambient Temperature ( C) 0. 0 Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance 0 0. Pulse Width = 0 µs % Duty Cycle Instantaneous Forward Voltage (V) Figure 4. Typical Instantaneous Forward Characteristics Transient Thermal Impedance ( C/W) t - Pulse Duration (s) Figure 7. Typical Transient Thermal Impedance 00 Instantaneous Reverse Current (µa) T J = C T J = 0 C Percentage of Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics 3

4 N400 thru N4007 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-4) 0.7 (2.7) (2.0) DIA..0 (.4) MIN (5.2) 0.60 (4.) Note: Lead diameter is (0.66) (0.58) for suffix E part numbers (0.86) (0.7) DIA..0 (.4) MIN. 4

5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 900 Revision: 8-Jul-08

Schottky Barrier Rectifiers

Schottky Barrier Rectifiers FEATURES Guardring for overvoltage protection Very small conduction losses Extremely fast switching Low forward voltage drop DO-204AL (DO-4) High frequency operation Solder