ARCOS. Spotlight System. Highest sensibility for art and culture the new spotlight system for museums and exhibitions.

ARCOS Spotlight System Highest sensibility for art and culture the new spotlight system for museums and exhibitions.

HUMANERGY BALANCE Intelligent lighting solutions strike a perfect balance between lighting quality and energy efficiency. LEDS CONTROL LIGHT For every application area, Zumtobel provides perfect LED lighting solutions with appropriate intelligent lighting control. www.zumtobel.com/led eco + The consumption-centred product label for Zumtobel s most efficient luminaires. www.zumtobel.com/eco dim²save Zumtobel s energy-saving initiative provides an affordable first step into the world of active lighting management. www.zumtobel.com/dimsave www.zumtobel.com/humanergybalance

ecocalc Calculation of the costs for an integral lighting solution in terms of business performance, environmental aspects and maintenance. www.zumtobel.com/ecocalc ELI LENI Lighting quality and energy consumption can be calculated and provide the basis for every Zumtobel lighting solution. www.zumtobel.com/eli_leni_calculator VIVALDI Visualisation of dynamic lighting solutions, indicating lighting quality and energy efficiency. www.zumtobel.com/vivaldi

5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 5 ARCOS Application ELI A LENI E B 30 60 D C 0 90 ELI: In this museum, ARCOS puts the focus on art alone, discreetly blending into the background with its unobtrusive appearance. Thus, a hierarchy of perception is created which provides both dramaturgic aspects and guidance. LENI: energy consumption.63 kwh/m²a Boijmans Van Beuningen Museum Rotterdam / NL Architects: Molenaar & Van Winden Architecten, Delft / NL Lighting solution: ARCOS spotlights

5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 5 ARCOS Application ELI A LENI E B 30 60 D C 0 90 ELI: The interplay of diffuse and directional lighting makes the museum appear in a very natural light. ARCOS provides illumination without casting any shadows, ensuring conservational lighting of the art objects. Thanks to the ARCOS colour selection, the lighting solution fades into the background, blending perfectly into the architecture. LENI: energy consumption 33.95 kwh/m²a heart Herning Museum of Contemporary Art Herning / DK Architects: Steven Holl Architects New York / US Lighting solution: ARCOS spotlights

ARCOS The high art of restraint ARCOS presents itself in a minimalist design with clear forms and contours: a purist cylindrical body combined with a discreet cubic insert for the control gear depending on size and lamp used. The overall appearance is completed by the new adaptor s minimalist design, which consistently continues right up to the track. Nothing should distract from an exhibit on the contrary: architecture and light should underline the effect of exhibits. Four different ARCOS spotlight sizes are available with advanced lighting technology and a wide variety of accessories. What they all have in common is a restrained appearance, leading to a consequently calm ceiling appearance. Every ARCOS detail bears witness to the many years of experience gained with museum and exhibition architecture. www.zumtobel.com/arcos Design David Chipperfield

We wanted to create a product together that would not only be installed by museum directors for high quality exhibition spaces but by ourselves as well. 9

A complete range for the perfect lighting of exhibits Standard versions ARCOS 1 Inconspicuous spotlight with small construction size for use with low ceiling heights. Ø 80 mm. With QR-CBC halogen lamps up to 50 W. ARCOS 1 Projection Projection spotlight for focusable, sharply outlined accent lighting. Ø 80 mm. With QR-CBC halogen lamps up to 50 W. ARCOS Compact spotlight for lower wattages. Ø 100 mm. With QT lamps up to 75 W and HIT up to 35 W. Wallwasher versions ARCOS 1 with wallwasher attachment For homogeneous illumination of surfaces in small rooms. Ø 80 mm. With QR-CBC halogen lamps up to 50 W. ARCOS with wallwasher attachment For small and medium sized rooms. Ø 100 mm. With QT lamps up to 75 W and HIT up to 35 W. ARCOS 3 with wallwasher attachment For medium sized rooms. Ø 10 mm. With QT/ QR 111 lamps up to 100 W and HIT up to 70 W.

ARCOS LED Stable White Compact spotlight incorporating state-of-the-art LED technology with two alternative colour temperatures. Ø 100 mm. Fitted with Flood and Spot LED modules, with 30 W and 1 W, respectively. ARCOS 3 Compact with high performance the right choice for countless applications. Ø 10 mm. With QT/ QR 111 lamps up to 100 W and HIT up to 70 W. ARCOS LED Tuneable White and ARCOS LED Tempura LED spotlight, optionally available with variable white balance (Tuneable White) or with RGB module with variable colours. Ø 10 mm. Fitted with W LED (variable white balance) or 5 W LED for RGB colour mixes. Available from August 010. ARCOS 4 HIT with wallwasher attachment For more intensive brightening of walls in large exhibition spaces. Ø 140 mm. With HIT lamps up to 150 W. ARCOS 4 QT/QR 111 with wallwasher attachment Alternative cylindrical form for medium sized rooms. Ø 140 mm. With QT/ QR 111 lamps up to 100 W. ARCOS Linear Wallwasher For uniform illumination of large wall surfaces. Design length: 178 mm. Fitted with QT-DE lamps up to 00 W.

ARCOS 4 HIT Maximum light output for large and high exhibition spaces. Ø 140 mm. With HIT lamps up to 150 W. ARCOS 4 QT/QR 111 Alternative cylindrical variation for halogen lamps. Ø 140 mm. With QT/ QR 111 lamps up to 100 W. Design length: 398 mm. Fitted with 35/70 W HIT-DE lamps. Design length: 591 mm. Fitted with 4/14 W T16 lamp. Design length: 1191 mm. Fitted with 54/8 W T16 lamp.

All innovations at a glance 13 ARCOS LED Three new LED spotlights provide perfect conservational lighting. The size ARCOS LED Stable White spotlight with 1/30 W lens module is an efficient solution with a high colour rendition index (RA > 90 at 3000 K) for illuminating objects that are sensitive to UV/IR radiation. Where variable shades of white with a high colour rendition index are required, size 3 ARCOS LED Tuneable White is the perfect choice. For coloured lighting scenes with RGB light, ARCOS LED Tempura is available, also in size 3. All spotlights can be dimmed via DALI or directly on the luminaire. ARCOS in compact size Today, better illumination of light is no longer a question of spotlight dimensions. ARCOS can be fitted with high-efficiency HIT lamps as well. Thus, the spotlight remains in the background even in rooms with lower ceiling heights, directing the eyes of the beholder exclusively to the exhibits. ARCOS linear wallwasher Perfectly uniform illumination of large wall surfaces can be achieved with the new linear wallwashers. Depending on the wall surface or application, four different sizes are available with a variety of lamps to be fitted.

The high-precision lighting tool for every lighting task Superspot (~8 ) The Superspot is used for accentuation of even the smallest details. Spot (~15 ) The Spot emphasises single picture or object areas. Flood (~5 ) For the illumination of mid-sized objects often in combination with Spots. No matter which of the four sizes of ARCOS you choose, every spotlight boasts it s own unique features. What is especially important in museums and exhibitions is glare-free lighting. First of all, the spotlight design boasts a built-in anti-glare panel. If required, a cruciform louvre attachment or lamp tube a black metal ring can be integrated into the reflector, preventing a direct view of the lamp. However different the lighting tasks may be, ARCOS provides the best solution: just look at the comprehensive range of optics available for a variety of modulations and poolings of light. Projection Thanks to the framing spotlight s lens system with adjustable focus, objects and pictures can be illuminated with sharp outlines.

15 Wideflood (~40 ) Projection Wallwashers (with rotationally symmetrical distribution) Wallwashers (with asymmetrically linear distribution) Larger surfaces are brightened up with the Wideflood spot. Also used for backlighting. If a sharply outlined, focusable light point is required, the Projection spotlight is the right choice. Wall surfaces or larger pictures can be uniformly illuminated by wallwashers fitted with lens attachments. Large wall surfaces are lit brightly and uniformly by the new linear wallwashers. Lamp focus adjustment The focal point of the light source can be precisely adjusted with an allen key. This compensates for tolerances of the lamp. Dimmability All ARCOS halogen versions can be dimmed directly via the control panel. Connection via DALI is of course also being provided. Glare control The black anti-glare shield reduces glare from the lamp and also minimises the stray of light. Used with Spot and Superspot reflectors.

Intelligent accessories for perfect presentations ARCOS acessories How can the message or form of an exhibit be presented in an ideal way? The finest nuances of materials and colours are often critical for the right effect. ARCOS offers a wide range of possibilities to perfectly solve any type of lighting requirement in just a few steps. A total of three different attachment rings are available, including a wallwasher attachment. The rotating accessory holder is integrated in both the short and long attachment ring. This holder can easily be removed and equipped with up to three different filters or lenses. With the automatic locking device and encoding of the lenses, the exact position of accessories is maintained even after relamping or replacement of reflectors. Lighting scenes are thus staged intuitively and simply ARCOS effortlessly conforms to the creative ideas of the user. Short attachment ring for up to three filters or lenses Standard version for applications requiring no more than two or three accessories. Long attachment ring with cross louvre for up to four filters or lenses In addition to glare control through the cross louvre, this version permits a large variety of possibilities for accessories. Wallwasher attachment For homogeneous, wide-area wall illumination. It features a special lens and a flood reflector insert. In addition, a further filter can be applied. All versions shown above are available as complete spotlights.

17 Oval lens In combination with a Spot reflector, an oval, soft light cone is created that can be rotated with the accessory holder and, hence, can be matched to the exhibit. Soft outline lens If lighting contrasts are to be reduced, the soft outline lens is used. In the example above, one of the effects is that the shadow below the picture frame is made softer. Conversion filter 300 4000 K This filter neutralises for example an excessively warm colour temperature created by the dimming process. An alternative is dimming with a special dimming filter. IR/UVA blocking filter Priceless paintings and objects must be protected from UV and IR light rays. This filter efficiently prevents ultraviolet and infrared radiation. Dimming filter Where a smaller quantity of light is required than the spotlight provides, a dimming filter can be applied. In contrast to electronic dimming, the colour temperature will always remain the same. Interference colour filters Blue, yellow, green and red filters are available for special colour accenting and effects. Barn doors These effectively and flexibly reduce undesired stray light outside of the illuminated object. Cross louvre Especially efficient glare control is achieved with the cross louvre in combination with the long attachment ring. Up to four further filters or lenses can be attached.

ARCOS LED Efficient conservational lighting ARCOS LED spotlights Where delicate exhibits require conservational lighting with a high colour rendition index (up to RA > 90 at 3000 K), ARCOS LED spotlights are the perfect solution. On the one hand, they emit almost no IR/UV radiation, on the other hand, they are energy-efficient and therefore also economically efficient. With a service life of 50,000 hours, ARCOS LED spotlights go easy not only on the exhibits, but also on operating costs. Dimming can also be achieved directly on the spotlight and does not result in any colour shifts. ARCOS LED Stable White The most compact LED spotlight is ARCOS LED Stable White, which is based on design size. Due to its secondary lens optic, it provides uniform light distribution with an excellent light output ratio. The available colour temperatures are warm white (3000 K) and intermediate white (400 K). Thanks to alternative fittings, the two Spot (1 W) and Flood (30 W) radiation angles and an optional oval outline lens, the luminaire masters all major lighting tasks.

19 ARCOS LED Tuneable White This size 3 spotlight combines a high colour rendition index (RA > 80 at 3000 K) with utmost flexibility for white colour temperatures, which can range from 700 K to 400 K and can be adjusted directly on the spotlight, enabling highly differentiated accent lighting. Subtle shades can be produced easily, with optimised quality of perception. Depending on the lighting task, two facetted reflector optics are available: Spot and Flood. The luminaire is controlled either via DALI or directly at the spotlight. ARCOS LED Tempura On the outside, this spotlight is identical in design with the ARCOS LED Tuneable White. The difference is in the LED technology. The RGB LED module allows the configuration of lighting scenes in dynamic colours and variably adjustable colour temperatures (white shades ranging from 700 K to 6500 K). This goes to show once more how ARCOS is able to meet the most diverse requirements to utmost perfection in a consistent design.

ARCOS wallwashers Clear and straight lines ARCOS linear wallwashers The linear ARCOS wallwashers are an important tool for lighting in museums. They allow uniform and efficient illumination of large surfaces or objects, resulting in maximum objectivity, transparency and effect of exhibits and exhibition rooms. The wallwashers minimalist design is geared to linear architecture. Thanks to four different sizes ranging from 18 to 10 cm for a variety of applications and room dimensions, ARCOS wallwashers allow lighting designers utmost flexibility. In addition, there are alternative fitting options such as the HIT model, which is also ideal for retail spaces because of its lighting intensity and brilliant colours. Especially worth mentioning is the elaborately devised no-tool relamping procedure for all models, thereby reducing maintenance efforts to a minimum.

1 Relamping: release lateral part Pull out front panel

Innovative adapter As unobtrusive as the spotlight itself Adaptor With the introduction of the new adapter, ARCOS comes up with another milestone. This connector is the smallest and most unobtrusive in design that is available on the market today. Since the designers managed to relocate the mechanism to the track level, what is visible of the adaptor is its very flat design, emphasising the ARCOS spotlight system s linear and unobtrusive structure which consistently continues right up to the track. This adaptor concept will also be the basis for all future spotlight systems by Zumtobel. As it is minimalist in design and dimensions, as impressive and intuitive is the adapter in terms of control. By using a bilateral parallel locking mechanism situated close to the bracket axis, an extremely high level of stability is obtained. The high-precision mechanism of the movable parts is remarkable as well. For instance, the phase is now easily selected via a convenient rotary switch, which can also be used during operation. Another innovation is the implementation of the DALI standard into the 3-phase track. Thus, digital lighting control can be effected via an already existing track. Open adapter Closed adapter Rotary switch for phase selection Or with DALI connection

ARCOS LED Stable White 3

Simple and secure handling for routine exhibition work In addition to the many technical possibilities of a spotlight system, one feature is of particular importance for exhibition work: easy, quick and safe handling. Only when the whole range of activities including relamping, replacement of accessories and precise adjustment can be carried out effortlessly and reliably is a spotlight system really tried and tested. When the right spotlight position has been found, ARCOS remembers the setting. Both the pivoting and rotating position can be fi xed with two allen keys. Even adjustment of the accessories is automatically fi xed with a concealed spring clip, as soon as, the attachment ring for relamping or replacement of refl ectors is removed. Fixing of spotlight alignment using allen key With an allen key the spotlight can be securely locked to protect against unintentional misalignment.

5 Releasing the bayonet catch For replacement of lamps and reflectors, the attachment ring is simply removed via the bayonet catch. The lamp can then be removed from the spotlight housing without having to touch the sensitive reflector. Direct access to the reflector The reflector is fixed in the rear of the attachment ring via a spring catch. It can be simply unlocked and removed. All components benefit from optimum protection due to the structural separation of reflector and lamp. Quick attachment of filters and lenses via removable accessory holder Filter and lens replacement has never been so easy: just remove the accessory holder and insert up to three or four accessories. Then lock the holder back into its position on the attachment ring and the job's done. Cool Touch thanks to perfect thermal management ARCOS can be handled and positioned at all times. Sophisticated air circulation prevents unpleasant heating up of the housing. This allows not only particularly easy and convenient usage of ARCOS, but also protects lamp and control gear electronics from premature wear. Encoded, self-locking accessory holder secures precise lens position In order to safeguard that the position of accessories is not altered during maintenance work, lenses are encoded and the accessory holder in the attachment ring is automatically fixed via a concealed spring mechanism.

5 5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 5 5 5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 5 30 60 0 90 5 1 0-1 4 4 3-3 1 1 1 - -1 3 0 4 1 5 5 ARCOS Human Aspects + Energy Efficiency = Humanergy Balance Balanced lighting solutions Exhibition A balanced lighting solution for exhibition spaces is characterised by a combination of brilliant accent and efficient ambient lighting. The efficiency of LED technology for accent lighting is already able to replace LV technology. Adjusting the colour temperature to the art objects allows optimum quality of perception, while at the same time the art objects are protected thanks to IR/UV-free lighting. ELI lighting quality Optimum Standard Basic LENI energy efficiency Basic Standard Optimum A A A ELI LENI ELI LENI ELI LENI E B 30 60 E B 30 60 E B 30 60 D C 0 90 7,83 kwh/m²a D C 0 90 11,65 kwh/m²a D C 0 90 15,93 kwh/m²a ARCOS QT 1/75 W Dimmed Lighting quality Brilliant accent lighting with excellent colour rendition Energy efficiency Low luminous efficiency and short maintenance intervals Dimming the lighting reduces energy consumption ARCOS LED 30 W Stable White Dimmed Lighting quality Excellent colour rendition IR/UV-free light for conservational lighting Energy efficiency Low energy consumption ideal for replacing LV technology Long maintenance intervals Innovative cooling system allows 50,000 hours of service life ARCOS LED W Tuneable White CIELOS C luminous ceiling Colour temperature adjustment (EMOTION) Lighting quality Variable adjustable colour temperatures in the white spectrum (700 K to 400 K) with good colour rendition for high-quality accent lighting IR/UV-free light for conservational lighting Accent lighting is supplemented with diffuse ambient lighting, creating pleasant light distribution with a natural feel Energy efficiency Low installed load with good efficiency Long maintenance intervals of LED luminaires and long service life Dynamic lighting control of luminous ceiling reduces energy consumption Underlying conditions: Exhibition space, 15 m x 8 m, 8 hrs., 50 days A ELI Ergonomic Lighting Indicator LENI Lighting Energy Numeric Indicator E D C B Lighting quality based on five criteria: A Visual performance B Vista C Visual comfort D Vitality E Empowerment Energy consumption in kwh per annum and per square metre, based on EN 15193.

7 The new product label indicating a high-quality rating in terms of criteria relevant to consumption. eco + is a holistic product label evaluating all system components involved and the lighting quality of a luminaire. eco + falls below the levels specified by existing energy directives by as much as 0 %. 1 3 FILTER 1 Energy efficiency Energy efficiency evaluates a luminaire s performance in terms of economic efficiency. It takes into account both the light output ratio and the efficiency of lamps and ballasts. Factors such as dimmability of a luminaire system have a positive impact on efficiency. FILTER Environmental relevance Environmental relevance is an evaluation criterion for luminaire details that are relevant to manufacture. Luminaires must be provided with halogen-free wiring and emergency luminaires must be fitted with cadmium-free batteries to obtain the eco + label. FILTER 3 Application quality Focussing on consumption levels alone does not consider a luminaire s lighting quality to a sufficient extent. For this reason, minimum glare control levels have been defined for eco + (depending on the area of application). Quality-enhancing light distribution (such as indirect components) is especially taken into account. For more information on eco +, please visit www.zumtobel.com/eco

ARCOS... Shared properties ARCOS ARCOS 1 QR-CBC QR-CBC51 0,5m 850 C Ideal for accent lighting in museums, exhibitions, art galeries and sales and display areas Compact design with minimalist look Innovative thermal design delivers COOL-TOUCH function... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp and accessory units Front cylinder with anti-glare ring designed to take accessories and is fixed to rear housing by Bayonet catch Die-cast aluminium housing Axes of movement can be fixed using Allen key supplied Lamp can be dimmed using rotary potentiometer on rear of housing 0 50 W Electronic safety transformer, can be controlled using integral rotary potentiometer Lampholder: GU 5.3 Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Wallwasher model with special lenses Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket Finish: anthracite or white microtextured paint Countersunk pivot Spotlight rotates through 365 and pivots through 90 kg Order no. Order no. 1-phase spotlight (with adapter and short attachment ring) white anthracite 1/50 W QR-CBC 51 1.1 60 710 654 60 710 655 3-phase spot (with universal adapter and short attachment ring) white anthracite 1/50 W QR-CBC 51 1.1 60 710 65 60 710 653 Accessory 30 oval-outline lens 60 700 10 55 x 70 oval-outline lens 60 700 103 Honeycomb louvre, black 60 700 100 Oval outline lens 60 60 700 08 Soft-outline lens 60 700 101 Blocking filter IR/UVA 60 700 104 For wall-mounting, please order additional wall-mounting bracket separately (60 80 059/060). See Tracks and Accessories. For recessed/surface-mounting: please order additional point outlet. (see Tracks and Accessories). 1/50 W QR-CBC 51, SPOT (6071065_10D) Average Mounting height illuminance Beam Diameter 80 1~ -1 mm 19 30 150 5 1/50 W QR-CBC 51, FLOOD (6071065_60D) Average Mounting height illuminance Beam Diameter 1 m 1565 lux 0.17 m 1 m 1001 lux 0.97 m m 3816 lux 0.35 m m 50 lux 1.93 m 3 m 1696 lux 0.5 m 3 m 111 lux.90 m 4 m 954 lux 0.70 m Φ=17 lm Half beam angle=x5 LOR=80% 4 m 63 lux 3.87 m Φ=110 lm Half beam angle=x6 LOR=83% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

9 ARCOS 1 projection QR-CBC QR-CBC51 0,5m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp and accessory units Front lens adjusts the sharpness Die-cast aluminium housing Axes of movement can be fixed using Allen key supplied Lamp can be dimmed using rotary potentiometer on rear of housing Fully assembled framing projector comprising stray-light shield, two projection lenses and one iris or one framing attachment 0 50 W Electronic safety transformer, can be controlled using integral rotary potentiometer Lampholder: GU 5.3 Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Iris model provides sharp-edged and high-contrast circular illumination; intuitive adjustment of aperture via iris diaphragm Framing attachment model for sharpedged, high-contrast and rectangular illumination of surfaces Wall-mounting not permissible kg Order no. Order no. Spotlight with 3-circuit universal adaptor white anthracite 1/50 W QR-CBC Projector with framing attachment 1.3 60 710 793 60 710 794 1/50 W QR-CBC Projector with iris 1.3 60 710 658 60 710 659 Accessory Framing slide, anthracite 60 700 185 Framing slide, white 60 700 107 Iris, anthracite 60 700 184 Iris, white 60 700 106 Custom-made gobos available on request. 80 38 60 710 658 / 60 710 659 30 150 388 80 38 60 710 793 / 60 710 794 30 150 388 ARCOS LED... Electronic ballast housing combined with cylindrical lamp housing Illuminance level can be adjusted using soft-switches on housing UVA-free and IR-free light Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key High-power LED module including secondary lens optic for precise, uniform light distribution With converter (power factor: 0.95) Colour rendering, flood version: RA > 90, 100 lm (warm white) / RA > 80, 1400 lm (neutral white) projected light Colour rendering, spot version: RA > 90, 360 lm (warm white) / RA > 80, 500 lm (neutral white) projected light Service life: 50000 h Mains voltage: 0 40 V / 50/60 Hz Lenses and filters available as optional accessories kg Order no. Order no. 3-phase LED spotlight, flood (with universal adapter) white anthracite 1/30 W neutral white (400 K) 5 1.7 60 710 877 60 710 878 1/30 W warm white (3000 K) 5 1.7 60 710 875 60 710 876 3-phase LED spotlight, spot (with universal adapter) white anthracite 1/1 W neutral white (400 K) 15 1.6 60 710 893 60 710 894 1/1 W warm white (3000 K) 15 1.6 60 710 891 60 710 89 3-phase LED spotlight, flood (with adapter for DALI track) white anthracite 1/30 W neutral white (400 K) 5, dimmable Dali 1.7 60 710 881 60 710 88 1/30 W warm white (3000 K) 5, dimmable Dali 1.7 60 710 879 60 710 880 3-phase LED spotlight, spot (with adapter for DALI track) white anthracite 1/1 W neutral white (400 K) 15, dimmable Dali 1.6 60 710 897 60 710 898 1/1 W warm white (3000 K) 15, Dali dimmable 1.6 60 710 895 60 710 896 100 33 40 193 306 60 710 891, 1/1W LED, SPOT (ST689) Average Mounting height illuminance Beam Diameter 1 m 1765 lux 0.6 m m 441 lux 0.5 m 3 m 196 lux 0.78 m 4 m 110 lux 1.04 m Φ=95 lm Half beam angle=x7 LOR=100% 60 710 875, 1/30W LED, FLOOD (ST691) Average Mounting height illuminance Beam Diameter 1 m 1566 lux 0.51 m m 391 lux 1.0 m 3 m 174 lux 1.54 m 4 m 98 lux.05 m Φ=870 lm Half beam angle=x14 LOR=100% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

ARCOS ARCOS QT 1 QT-LP 1 1,0m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and anti-glare ring is designed to take accessories Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Lamps can be focussed on rear of housing using Allen screw Cross-louvre model can take up to 3 accessories e.g. two lenses and one filter 0 100 W electronic safety transformer, with rotary potentiometer control Lampholder: GY 6.35 Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Wallwasher model with special lens and wallwasher reflector insert Dimmable DALI version: with 0 105 W electronic transformer, for Zumtobel DALI track Specular reflector optic designed as exchangeable reflector, can be retrofitted Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket kg Order no. Order no. 3-phase spot, wide-beam (with universal adapter and short attachment ring) white anthracite 1/75 W QT-LP 1 flood 1.4 60 710 680 60 710 681 1/75 W QT-LP 1 wideflood 1.4 60 710 68 60 710 683 3-phase spot, narrow-beam (with universal adapter and short attachment ring) white anthracite 1/75 W QT-LP 1 spot 1.4 60 710 678 60 710 679 1/75 W QT-LP 1 superspot 1.4 60 710 676 60 710 677 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/75 W QT-LP 1 flood 1.4 60 710 845 60 710 846 1/75 W QT-LP 1 wideflood 1.4 60 710 847 60 710 848 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/75 W QT-LP 1 spot 1.4 60 710 843 60 710 844 1/75 W QT-LP 1 superspot 1.4 60 710 841 60 710 84 3-phase spot (with universal adapter and wallwasher attachment) white anthracite 1/75 W QT-LP 1 1.4 60 710 688 60 710 689 3-phase spot, wide-beam (with adapter for DALI track and short attachment ring) white anthracite 1/75 W QT-LP 1 flood 1.4 60 710 835 60 710 836 1/75 W QT-LP 1 wideflood 1.4 60 710 837 60 710 838 3-phase spot, narrow-beam (with adapter for DALI track and short attachment ring) white anthracite 1/75 W QT-LP 1 spot 1.4 60 710 833 60 710 834 1/75 W QT-LP 1 superspot 1.4 60 710 831 60 710 83 3-phase spot (with adapter for DALI track and wallwasher attachment) white anthracite 1/75 W QT-LP 1 1.4 60 710 839 60 710 840 Accessory 0 % dimming filter 60 700 1 33 % dimming filter 60 700 13 50 % dimming filter 60 700 14 30 oval-outline lens 60 700 110 50 oval-outline lens 60 700 111 55 x 70 oval-outline lens 60 700 11 Anti-glare tube, QT1/ HIT-TC-CE GU6.5, black (for screening lamp) 60 700 114 Barn doors, black 60 700 116 Conversion filter 300-4000 K 60 700 11 Honeycomb louvre, black 60 700 108 Soft-outline lens 60 700 109 Exchangeable reflectors flood 60 700 17 Exchangeable reflectors spot 60 700 16 Exchangeable reflectors superspot 60 700 15 Exchangeable reflectors wideflood 60 700 18 Blocking filter IR/UVA 60 700 113 Colour filter blue 60 700 118 Colour filter green 60 700 119 Colour filter red 60 700 117 Colour filter yellow 60 700 10 For wall-mounting, please order additional wall-mounting bracket (60 80 059/060) (see Tracks and Accessories). For recessed/surface-mounting: please order additional point outlet (see Tracks and Accessories). 100 40 193 76 100 40 193 90 100 40 193 334 1/75 W QT-LP 1, SPOT (60710678_SG_GK) Average Mounting height illuminance Beam Diameter 1 m 177 lux 0.18 m 1/75 W QT-LP 1, FLOOD (60710680_SG) Average Mounting height illuminance Beam Diameter 1 m 4494 lux 0.40 m 03 17 60 m 3193 lux 0.36 m m 114 lux 0.80 m 3 m 1419 lux 0.54 m 3 m 499 lux 1.0 m 60 710 839/840/688/689 60 710 849/850/851/85 4 m 798 lux 0.7 m Φ=1350 lm Half beam angle=x5 LOR=56% 4 m 81 lux 1.60 m Φ=1350 lm Half beam angle=x11 LOR=70% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

31 ARCOS HIT-TC-CE GU6.5 HIT-TC-CE GU6,5 1,0m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and anti-glare ring is designed to take accessories Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Lamps can be focussed on rear of housing using Allen screw With electronic ballast Lampholder: GU 6.5 Mains voltage: 0 40 V / 50/60 Hz Wallwasher model with special lens and wallwasher reflector insert Specular reflector optic designed as exchangeable reflector, can be retrofitted Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket kg Order no. Order no. 3-phase spot, wide-beam (with universal adapter and short attachment ring) white anthracite 1/0 W HIT-TC-CE GU6,5 flood 1.4 60 710 664 60 710 665 1/0 W HIT-TC-CE GU6,5 wideflood 1.4 60 710 666 60 710 667 1/35 W HIT-TC-CE GU6,5 flood 1.4 60 710 67 60 710 673 1/35 W HIT-TC-CE GU6,5 wideflood 1.4 60 710 674 60 710 675 3-phase spot, narrow-beam (with universal adapter and short attachment ring) white anthracite 1/0 W HIT-TC-CE GU6,5 spot 1.4 60 710 66 60 710 663 1/0 W HIT-TC-CE GU6,5 superspot 1.4 60 710 660 60 710 661 1/35 W HIT-TC-CE GU6,5 spot 1.4 60 710 670 60 710 671 1/35 W HIT-TC-CE GU6,5 superspot 1.4 60 710 668 60 710 669 3-phase spot (with universal adapter and wallwasher attachment) white anthracite 1/0 W HIT-TC-CE GU6,5 1.4 60 710 849 60 710 850 1/35 W HIT-TC-CE GU6,5 1.4 60 710 851 60 710 85 Accessory 0 % dimming filter 60 700 1 33 % dimming filter 60 700 13 50 % dimming filter 60 700 14 30 oval-outline lens 60 700 110 50 oval-outline lens 60 700 111 55 x 70 oval-outline lens 60 700 11 Anti-glare tube, QT1/ HIT-TC-CE GU6.5, black (for screening lamp) 60 700 114 Barn doors, black 60 700 116 Conversion filter 300-4000 K 60 700 11 Honeycomb louvre, black 60 700 108 Soft-outline lens 60 700 109 Exchangeable reflectors flood 60 700 17 Exchangeable reflectors spot 60 700 16 Exchangeable reflectors superspot 60 700 15 Exchangeable reflectors wideflood 60 700 18 Blocking filter IR/UVA 60 700 113 Colour filter blue 60 700 118 Colour filter green 60 700 119 Colour filter red 60 700 117 Colour filter yellow 60 700 10 For wall-mounting, please order additional wall-mounting bracket (60 80 059/060) (see Tracks and Accessories). For recessed/surface-mounting: please order additional point outlet (see Tracks and Accessories). 100 40 193 76 100 334 40 193 03 60 60 710 839/840/688/689 60 710 849/850/851/85 1/0 W HIT-TC-CE, SPOT (6071066_SG_GK) Average Mounting height illuminance Beam Diameter 1/0 W HIT-TC-CE, FLOOD (60710666_SG) Average Mounting height illuminance Beam Diameter 1 m 1741 lux 0.0 m 1 m 5744 lux 0.40 m m 3185 lux 0.41 m m 1436 lux 0.79 m 3 m 1416 lux 0.61 m 3 m 638 lux 1.19 m 4 m 796 lux 0.8 m Φ=1700 lm Half beam angle=x6 LOR=57% 4 m 359 lux 1.59 m Φ=1700 lm Half beam angle=x11 LOR=69% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

ARCOS ARCOS 3 QT 1 QT-LP 1 1,0m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and anti-glare ring is designed to take accessories Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Rear of housing contains Allen screw for lamp focussing and rotary potentiometer for dimming Cross-louvre model can take up to 3 accessories e.g. two lenses and one filter 0 100 W electronic safety transformer, with rotary potentiometer control Lampholder: GY 6.35 Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Wallwasher model with special lens and wallwasher reflector insert Dimmable DALI version: with 0 105 W electronic transformer, for Zumtobel DALI track Specular reflector optic designed as exchangeable reflector, can be retrofitted Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket kg Order no. Order no. 3-phase spot, wide-beam (with universal adapter and short attachment ring) white anthracite 1/100 W QT-LP 1 flood.0 60 710 718 60 710 719 1/100 W QT-LP 1 wideflood.0 60 710 70 60 710 71 3-phase spot, narrow-beam (with universal adapter and short attachment ring) white anthracite 1/100 W QT-LP 1 spot.0 60 710 716 60 710 717 1/100 W QT-LP 1 superspot.0 60 710 714 60 710 715 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QT-LP 1 flood.1 60 710 710 60 710 711 1/100 W QT-LP 1 wideflood.1 60 710 71 60 710 713 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QT-LP 1 spot.1 60 710 708 60 710 709 1/100 W QT-LP 1 superspot.1 60 710 706 60 710 707 3-phase spot (with universal adapter and wallwasher attachment) white anthracite 1/100 W QT-LP 1.1 60 710 7 60 710 73 3-phase spot, wide-beam (with adapter for DALI track and short attachment ring) white anthracite 1/100 W QT-LP 1 flood, DALI dimmable.1 60 710 78 60 710 79 1/100 W QT-LP 1 wideflood, DALI dimmable.1 60 710 730 60 710 731 3-phase spot, narrow-beam (with adapter for DALI track and short attachment ring) white anthracite 1/100 W QT-LP 1 spot, DALI dimmable.1 60 710 76 60 710 77 1/100 W QT-LP 1 superspot, DALI dimmable.1 60 710 74 60 710 75 3-phase spot (with adapter for DALI track and wallwasher attachment) white anthracite 1/100 W QT-LP 1, DALI dimmable.1 60 710 73 60 710 733 Accessory 0 % dimming filter 60 700 143 33 % dimming filter 60 700 144 50 % dimming filter 60 700 145 30 oval-outline lens 60 700 131 50 oval-outline lens 60 700 13 55 x 70 oval-outline lens 60 700 133 Anti-glare tube, black (for screening lamp) 60 700 135 Barn doors, black 60 700 137 Conversion filter 300-4000 K 60 700 14 Honeycomb louvre, black 60 700 19 Soft-outline lens 60 700 130 Exchangeable reflectors flood 60 700 148 Exchangeable reflectors spot 60 700 147 Exchangeable reflectors superspot 60 700 146 Exchangeable reflectors wideflood 60 700 149 Blocking filter IR/UVA 60 700 134 Colour filter blue 60 700 139 Colour filter green 60 700 140 Colour filter red 60 700 138 Colour filter yellow 60 700 141 For wall-mounting, please order additional wall-mounting bracket separately (60 80 059/060). See Tracks and Accessories. For recessed/surface-mounting: please order additional point outlet (see Tracks and Accessories). 10 40 1 317 10 40 1 334 10 40 1 386 1/100 W QT-LP 1, SPOT (60710716_SG_GK) Average Mounting height illuminance Beam Diameter 1 m 13979 lux 0. m 1/100 W QT-LP 1, FLOOD (60710718_SG) Average Mounting height illuminance Beam Diameter 1 m 698 lux 0.44 m 49 66 318 m 3495 lux 0.44 m 3 m 1553 lux 0.67 m m 1575 lux 0.88 m 3 m 700 lux 1.3 m 60 710 706 60 710 713 60 710 7 / 73 / 73 / 733 4 m 874 lux 0.89 m Φ=00 lm Half beam angle=x6 LOR=60% 4 m 394 lux 1.76 m Φ=00 lm Half beam angle=x1 LOR=83% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

33 ARCOS 3 QR 111 1,4m 850 C QR111... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp and accessory units Front cylinder with anti-glare ring designed to take accessories and is fixed to rear housing by Bayonet catch Rotating attachment holder integrated in front cylinder Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Rear of housing contains Allen screw for lamp focussing and rotary potentiometer for dimming 0 100 W electronic safety transformer, with rotary potentiometer control Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Dimmable DALI version: with 0 105 W electronic transformer, for Zumtobel DALI track Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket kg Order no. Order no. 3-phase spot (with universal adapter and short attachment ring) white anthracite 1/100 W QR 111.1 60 710 736 60 710 737 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QR 111. 60 710 734 60 710 735 3-phase spot (with adapter for DALI track and short attachment ring) white anthracite 1/100 W QR 111, DALI dimmable.1 60 710 738 60 710 739 Accessory 0% dimming filter 60 700 143 33% dimming filter 60 700 144 50% dimming filter 60 700 145 30 oval-outline lens 60 700 131 50 oval-outline lens 60 700 13 55 x 70 oval-outline lens 60 700 133 Barn doors, black 60 700 137 Conversion filter 300-4000 K 60 700 14 Honeycomb louvre, black 60 700 19 Soft-outline lens 60 700 130 Blocking filter IR/UVA 60 700 134 Colour filter blue 60 700 139 Colour filter green 60 700 140 Colour filter red 60 700 138 Colour filter yellow 60 700 141 For wall-mounting, please order additional wall-mounting bracket separately (60 80 059/060). See Tracks and Accessories. For recessed/surface-mounting: please order additional point outlet (see Tracks and Accessories). 10 317 40 1 10 334 40 1 49 66 60 710 734 / 60 710 735 1/100 W QR 111, SPOT (60710736_100_8_RS) Average Mounting height illuminance Beam Diameter 1/100 W QR 111, FLOOD (60710734_100_45_KR) Average Mounting height illuminance Beam Diameter 1 m 946 lux 0.13 m 1 m 1445 lux 0.43 m m 7365 lux 0.6 m m 361 lux 0.85 m 3 m 374 lux 0.39 m 3 m 161 lux 1.8 m 4 m 1841 lux 0.5 m Φ=1704 lm Half beam angle=x4 LOR=84% 4 m 90 lux 1.71 m Φ=1150 lm Half beam angle=x1 LOR=45% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

ARCOS ARCOS 3 HIT-TC-CE G8.5 HIT-TC-CE G8,5 1,0m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and anti-glare ring is designed to take accessories Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Lamps can be focussed on rear of housing using Allen screw With electronic ballast Lampholder: G 8.5 Mains voltage: 0 40 V / 50/60 Hz Specular reflector optic designed as exchangeable reflector, can be retrofitted Vertical installation on wall only possible using Zumtobel 3-phase universal adapter and wall-mounting bracket kg Order no. Order no. 3-phase spot, wide-beam (with universal adapter and short attachment ring) white anthracite 1/35 W HIT-TC-CE G8,5 flood 1.9 60 710 694 60 710 695 1/35 W HIT-TC-CE G8,5 wideflood 1.9 60 710 696 60 710 697 1/70 W HIT-TC-CE G8,5 flood.0 60 710 70 60 710 703 1/70 W HIT-TC-CE G8,5 wideflood.0 60 710 704 60 710 705 3-phase spot, narrow-beam (with universal adapter and short attachment ring) white anthracite 1/35 W HIT-TC-CE G8,5 spot 1.9 60 710 69 60 710 693 1/35 W HIT-TC-CE G8,5 superspot 1.9 60 710 690 60 710 691 1/70 W HIT-TC-CE G8,5 spot.0 60 710 700 60 710 701 1/70 W HIT-TC-CE G8,5 superspot.0 60 710 698 60 710 699 Accessory 0 % dimming filter 60 700 143 33 % dimming filter 60 700 144 50 % dimming filter 60 700 145 30 oval-outline lens 60 700 131 50 oval-outline lens 60 700 13 55x70 oval-outline lens 60 700 133 Anti-glare tube, black (for screening lamp) 60 700 136 Barn doors, black 60 700 137 Conversion filter 300-4000 K 60 700 14 Honeycomb louvre, black 60 700 19 Soft-outline lens 60 700 130 Exchangeable reflectors flood 60 700 148 Exchangeable reflectors spot 60 700 147 Exchangeable reflectors superspot 60 700 146 Exchangeable reflectors wideflood 60 700 149 Blocking filter IR/UVA 60 700 134 Colour filter blue 60 700 139 Colour filter green 60 700 140 Colour filter red 60 700 138 Colour filter yellow 60 700 141 For wall-mounting, please order additional wall-mounting bracket (60 80 059/060). See Tracks and Accessories. For recessed/surface-mounting: please order an additional point outlet (see Tracks and Accessories). 10 40 1 317 1/35 W HIT-TC-CE G8,5, SPOT (6071069_SG_GK) 1/35 W HIT-TC-CE G8,5, FLOOD (60710694_SG) Average Average Mounting height illuminance Beam Diameter Mounting height illuminance Beam Diameter 1 m 19509 lux 0.3 m 1 m 9905 lux 0.43 m 49 m 4877 lux 0.47 m 3 m 168 lux 0.70 m m 476 lux 0.85 m 3 m 1101 lux 1.8 m 4 m 119 lux 0.93 m Φ=3300 lm Half beam angle=x7 LOR=59% 4 m 619 lux 1.70 m Φ=3300 lm Half beam angle=x1 LOR=77% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

35 ARCOS 4 QT 1 QT-LP 1 1,0m 850 C... Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and cross louvre is designed to take up to 3 accessories e.g. two lenses and one filter Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Rear of housing contains Allen screw for lamp focussing and rotary potentiometer for dimming 0 100 W electronic safety transformer, with rotary potentiometer control Lampholder: GY 6.35 Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Wallwasher model with special lens and wallwasher reflector insert Specular reflector optic designed as exchangeable reflector, can be retrofitted Not suitable for point outlets Wall-mounting not permissible kg Order no. Order no. 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QT-LP 1 flood.0 60 710 744 60 710 745 1/100 W QT-LP 1 wideflood.0 60 710 746 60 710 747 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QT-LP 1 spot.0 60 710 74 60 710 743 1/100 W QT-LP 1 superspot.0 60 710 740 60 710 741 3-phase spot (with universal adapter and wallwasher attachment) white anthracite 1/100 W QT-LP 1.0 60 710 748 60 710 749 Accessory 0 % dimming filter 60 700 164 33 % dimming filter 60 700 165 50 % dimming filter 60 700 166 30 oval-outline lens 60 700 15 50 oval-outline lens 60 700 153 55x70 oval-outline lens 60 700 154 Anti-glare tube, black (for screening lamp) 60 700 156 Barn doors, black 60 700 158 Conversion filter 300-4000 K 60 700 163 Honeycomb louvre, black 60 700 150 Soft-outline lens 60 700 151 Exchangeable reflectors flood 60 700 169 Exchangeable reflectors spot 60 700 168 Exchangeable reflectors superspot 60 700 167 Exchangeable reflectors wideflood 60 700 170 Blocking filter IR/UVA 60 700 155 Colour filter blue 60 700 160 Colour filter green 60 700 161 Colour filter red 60 700 159 Colour filter yellow 60 700 16 140 83 40 0 361 140 339 60 710 748 / 60 710 749 40 0 43 1/100 W QT-LP 1, SPOT (6071074_SG_GK_KR) Average Mounting height illuminance Beam Diameter 1/100 W QT-LP 1, FLOOD (60710744_SG_KR) Average Mounting height illuminance Beam Diameter 1 m 15698 lux 0. m 1 m 5777 lux 0.41 m m 395 lux 0.44 m m 1444 lux 0.81 m 3 m 1744 lux 0.66 m 3 m 64 lux 1. m 4 m 981 lux 0.88 m Φ=00 lm Half beam angle=x6 LOR=5% 4 m 361 lux 1.63 m Φ=00 lm Half beam angle=x1 LOR=65% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

ARCOS ARCOS 4 QR 111 1,4m 850 C QR111... Accessories easy to fit thanks to separate lamp and accessory units Front cylinder with cross-louvre is designed to take up to 3 accessories e.g. two lenses and one filter Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping) Rotating attachment holder integrated in front cylinder Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Rear of housing contains Allen screw for lamp focussing and rotary potentiometer for dimming 0 100 W electronic safety transformer, with rotary potentiometer control Mains voltage: 30 40 V / 50/60 Hz rated lamp voltage: 1 V Not suitable for point outlets Wall-mounting not permissible kg Order no. Order no. 3-phase spot (with universal adapter and cross-louvre attachment) white anthracite 1/100 W QR 111.0 60 710 750 60 710 751 Accessory 0 % dimming filter 60 700 164 33 % dimming filter 60 700 165 50 % dimming filter 60 700 166 30 oval-outline lens 60 700 15 50 oval-outline lens 60 700 153 55 x 70 oval-outline lens 60 700 154 Barn doors, black 60 700 158 Conversion filter 300-4000 K 60 700 163 Honeycomb louvre, black 60 700 150 Soft-outline lens 60 700 151 Blocking filter IR/UVA 60 700 155 Colour filter blue 60 700 160 Colour filter green 60 700 161 Colour filter red 60 700 159 Colour filter yellow 60 700 16 140 40 0 361 1/100 W QR 111, SPOT (60710750_100_8_KR) 1/100 W QR 111, FLOOD 60710750_100_45_KR) Average Average Mounting height illuminance Beam Diameter Mounting height illuminance Beam Diameter 1 m 44438 lux 0.11 m m 11109 lux 0. m 1 m 1445 lux 0.43 m m 361 lux 0.85 m 83 3 m 4938 lux 0.33 m 3 m 161 lux 1.8 m 4 m 777 lux 0.44 m Φ=1704 lm Half beam angle=x3 LOR=73% 4 m 90 lux 1.71 m Φ=1150 lm Half beam angle=x1 LOR=45% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

37 ARCOS 4 HIT-CE G1 HIT-CE G1 1,4m 850 C... Electronic ballast housing combined with cylindrical lamp housing Accessories easy to fit thanks to separate lamp unit, reflector and accessory unit Front cylinder with specular reflector and anti-glare ring is designed to take accessories Front cylinder fixed to rear housing via twist and lock bayonet mechanism (extremely easy relamping and replacement of reflector) Rotating attachment holder integrated in front cylinder When replacing the lamp or reflector, the attachment holder is locked in place (rotation lock device) Housing made of extruded aluminium section and die-cast aluminium Axes of movement can be fixed separately using Allen key Specular reflector made of anodised highest-grade aluminium, silver colour, incl. protective glass panel Lamps can be focussed on rear of housing using Allen screw With electronic ballast Lampholder: G 1 Mains voltage: 0 40 V / 50/60 Hz Specular reflector optic designed as exchangeable reflector, can be retrofitted Not suitable for point outlets Wall-mounting not permissible kg Order no. Order no. 3-phase spot, wide-beam (with universal adapter and short attachment ring) white anthracite 1/70 W HIT-CE G1 flood.9 60 710 756 60 710 757 1/70 W HIT-CE G1 wideflood.9 60 710 758 60 710 759 1/150 W HIT-CE G1 flood.9 60 710 764 60 710 765 1/150 W HIT-CE G1 wideflood.9 60 710 766 60 710 767 3-phase spot, narrow-beam (with universal adapter and short attachment ring) white anthracite 1/70 W HIT-CE G1 spot.9 60 710 754 60 710 755 1/70 W HIT-CE G1 superspot.9 60 710 75 60 710 753 1/150 W HIT-CE G1 spot.9 60 710 76 60 710 763 1/150 W HIT-CE G1 superspot.9 60 710 760 60 710 761 Accessory 0 % dimming filter 60 700 164 33 % dimming filter 60 700 165 50 % dimming filter 60 700 166 30 oval-outline lens 60 700 15 50 oval-outline lens 60 700 153 55 x 70 oval-outline lens 60 700 154 Anti-glare tube, black (for screening lamp) 60 700 157 Barn doors, black 60 700 158 Conversion filter 300-4000 K 60 700 163 Honeycomb louvre, black 60 700 150 Soft-outline lens 60 700 151 Exchangeable reflectors flood 60 700 173 Exchangeable reflectors spot 60 700 17 Exchangeable reflectors superspot 60 700 171 Exchangeable reflectors wideflood 60 700 174 Blocking filter IR/UVA 60 700 155 Colour filter blue 60 700 160 Colour filter green 60 700 161 Colour filter red 60 700 159 Colour filter yellow 60 700 16 140 40 37 376 98 1/150 W HIT-CE G1, SPOT (6071076_SG_GK) Average Mounting height illuminance Beam Diameter 1/150 W HIT-CE G1, FLOOD (60710764_SG) Average Mounting height illuminance Beam Diameter 1 m 67457 lux 0. m 1 m 6631 lux 0.45 m m 16864 lux 0.44 m m 6658 lux 0.89 m 3 m 7495 lux 0.65 m 3 m 959 lux 1.34 m 4 m 416 lux 0.87 m Φ=14000 lm Half beam angle=x6 LOR=56% 4 m 1664 lux 1.78 m Φ=14000 lm Half beam angle=x13 LOR=6% The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

ARCOS... Shared properties ARCOS WW Wallwasher spot optimised for uniform vertical illumination in museums, exhibitions, art galeries and sales and retail outlets Compact design with minimalist look Asymmetric specular reflector made of textured high-grade aluminium in anodised silver-look finish Housing made of extruded aluminium section with die-cast aluminium end faces Finish: anthracite or white microtextured paint Relamping without tools Asymmetrical light distribution Wall-mounting not permissible ARCOS WW QT-DE asymmetric... Countersunk pivot Spotlight rotates through 365 and pivots through 90 With UVA reduction filter Lampholder: R7s Mains voltage: 0 40 V / 50/60 Hz Filters, vane louvre and barn doors available as optional accessories kg Order no. Order no. Spotlight with 3-circuit universal adaptor white anthracite 1/00 W QT-DE 1 0.9 60 710 768 60 710 769 Accessory Barn doors, black 60 700 177 Conversion filter 300-4000 K 60 700 178 Soft-outline lens 60 700 175 vane louvre 60 700 09 Blocking filter UVA 60 700 176 133 156 149 1/00 W QT-DE 1 (ST69) 180 150 150 10 10 178 8 90 450 300 150 90 QT-DE1 60 60 cd/klm 30 0 30 ARCOS WW HIT-DE asymmetric... 90 tilt of spotlight head Adapter can pivot through 365 With protective glass With electronic ballast Lampholder: RX7s Mains voltage: 30 V / 50 Hz Not suitable for point outlets Filters, vane louvre and barn doors available as optional accessories kg Order no. Order no. Spotlight with 3-circuit universal adaptor white anthracite 1/35 W HIT-DE. 60 710 978 60 710 979 1/70 W HIT-DE. 60 710 770 60 710 771 Accessory Barn doors, black 60 700 177 Conversion filter 300-4000 K 60 700 178 Soft-outline lens 60 700 175 Blocking filter UVA 60 700 176 133 156 149 398 8 HIT-DE HIT-DE-CE 1/35 W HIT-DE (ST694) 180 150 150 1/70 W HIT-DE (ST693) 180 150 150 10 10 10 10 90 450 300 150 90 90 450 300 150 90 60 60 60 60 cd/klm 30 0 30 cd/klm 30 0 30 The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

39 ARCOS WW T16 asymmetric... 90 tilt of spotlight head Adapter can pivot through 365 With protective glass With electronic ballast Lampholder: G 5 Mains voltage: 30 V / 50 Hz Not suitable for point outlets Vane louvre available as optional accessory kg Order no. Order no. Spotlight with 3-circuit universal adaptor white anthracite 1/14 or 1/4 W T16.4 60 710 883 60 710 884 1/8 or 1/54 W T16 4.0 60 710 885 60 710 886 Spotlight with 3-circuit DALI -adaptor (for DALI track) white anthracite 1/14 or 1/4 W T16.4 60 710 887 60 710 888 1/8 or 1/54 W T16 4.0 60 710 889 60 710 890 Accessory Prismatic optic for 1/14 or 1/4 W T16 60 700 189 Prismatic optic for 1/8 or 1/54 W T16 60 700 190 Vane louvre for 1/14 or 1/4 W T16 60 700 10 Vane louvre for 1/8 or 1/54 W T16 60 700 11 133 156 149 T16 L 8 4 W T16: L = 591 54 W T16: L = 1191 The consumption-centred product label for Zumtobel s most efficient luminaires falls below the levels specified by existing energy directives by 0 %. www.zumtobel.com/eco

LIGHT FOR OFFICES AND COMMUNICATION LIGHT FOR EDUCATION AND SCIENCE LIGHT FOR PRESENTATION AND RETAIL LIGHT FOR HOTEL AND WELLNESS LIGHT FOR ART AND CULTURE www.zumtobel.com/office www.zumtobel.com/education www.zumtobel.com/shop www.zumtobel.com/hotel www.zumtobel.com/culture LIGHT FOR HEALTH AND CARE LIGHT FOR INDUSTRY AND ENGINEERING LIGHT FOR SPORT AND LEISURE LIGHT FOR TRANSIT AREAS AND PARKING LIGHTING FOR ORIENTATION AND SAFETY www.zumtobel.com/healthcare www.zumtobel.com/industry www.zumtobel.com/sport www.zumtobel.com/parking www.zumtobel.com/safety Zumtobel is the internationally leading supplier of integral lighting solutions for professional interior and exterior lighting applications. YEAR GUARANTEE Top quality with a five-year guarantee. As a globally leading luminaire manufacturer, Zumtobel provides a five-year guarantee for its complete product range with effect from 1 April 010. www.zumtobel.com/guarantee Art.-Nr. 04 900 313-UK 03/10 Zumtobel Lighting GmbH Technical data was correct at time of going to press. We reserve the right to make technical changes without notice. Please contact your local sales office for further information. For the sake of the environment: Luxo Light is chlorine-free paper from sustainably managed forests and certified sources. www.natureoffice.com / xx-xxx-xxxxxx www.pefc.org Offices and Communication Education and Science Presentation and Retail Hotel and Wellness Art and Culture Health and Care Industry and Engineering Sport and Leisure Transit Areas and Parking Orientation and Safety We provide unique customer benefits by integrating technology, design, emotion and energy efficiency. Under the Humanergy Balance concept, we combine the best possible ergonomic lighting quality for an individual s wellbeing with the responsible use of energy resources. The company s own sales organisa tions in twenty countries, as well as commercial agencies in fifty other countries, form an international network of experts and design partners providing professional lighting consulting, design assistance and comprehensive services. Lighting and sustainability In line with our corporate philosopy We want to use light to create worlds of experience, make work easier and improve communications and safety while remaining fully aware of our responsibility to the environment, Zumtobel offers energy-efficient highquality products, while at the same time making sure that our production processes based on the considerate use of resources are environmentally compatible. www.zumtobel.com/sustainability

TRACK AND SPOTS MODULAR LIGHTING SYSTEMS DOWN-/UPLIGHTS RECESSED LUMINAIRES SURFACE-MOUNTED AND PENDANT LUMINAIRES LED, TASK, WALL AND UPLIGHTS CONTINUOUS ROW AND BATTEN LUMINAIRES HIGH-BAY LUMINAIRES LUMINAIRES WITH EXTRA PROTECTION LIGHTING MANAGEMENT EMERGENCY LIGHTING MEDICAL SUPPLY SYSTEMS United Kingdom Zumtobel Lighting Ltd. Unit 4 - The Argent Centre, Pump Lane Hayes/Middlesex UB3 3BL T +44/(0)0 8589 1800 F +44/(0)0 8756 4800 M enquiries@zumtobel.com www.zumtobel.co.uk USA and Canada Zumtobel Lighting Inc. Location Highland 3300 Route 9W Highland, New York 158-630 T +1/(0)845/691 6 6 F +1/(0)845/691 6 89 www.zumtobel.us www.zumtobel.ca Australia and New Zealand Zumtobel Lighting Pty Ltd 333 Pacific Highway North Sydney, NSW 060 T +61/()8913 5000 F +61/()8913 5001 M info@zumtobel.com.au www.zumtobel.com.au China Zumtobel Lighting China Beijing Office T5--15 Tayuan Diplomatic Compound No. 1 Xin Dong Road, Chaoyang District 100600 Beijing T +86/(10) 853 3886 F +86/(10) 853 3889 M admin@zumtobel.com.hk Hong Kong Zumtobel Lighting Hong Kong Unit 319, Level 43, Tower 1, Metroplaza, 3 Hing Fong Road, Kwai Chung, N.T. T +85/(0)503 0466 F +85/(0)503 0177 M admin@zumtobel.com.hk India Zumtobel Lighting GmbH Branch Office India Manipal Centre, S-605 Dickenson Road 56004 Bangalore T +91 99 0017 030 M pon.kumaresh@zumtobel.com United Arab Emirates Zumtobel Lighting GmbH (Branch) Dubai Airport Free Zone, Building 6W, B Block, 33 PO Box 5430 Dubai T +971/(0)4 99 3530 F +971/(0)4 99 3531 M info@zumtobeluae.ae Hungary Zumtobel Lighting Kft Lomb u. 15. 1139 Budapest T +36/(1) 35 00 88 F +36/(1) 35 00 89 M office.hu@zumtobel.com www.zumtobel.hu Croatia, Serbia, Bosnia and Herzegovina Zumtobel Licht d.o.o. Radnička cesta 80 Zagrebtower 10000 Zagreb T +385/(1) 64 04 080 F +385/(1) 64 04 090 M hrvatska@zumtobel.com M srbija@zumtobel.com www.zumtobel.hr Czech Republic and Slovak Republic Zumtobel Lighting s.r.o. Jankovcova Praha 7 170 00 Praha T +40/() 66 78 00 F +40/() 66 78 01 M praha@zumtobel.com www.zumtobel.cz Poland Zumtobel Licht GmbH Sp.z.o.o. Przedstawicielstwo w Polsce ul. Narbutta 46/48 0-541 Warszawa T +48/() 856 7431 F +48/() 856 743 www.zumtobel.pl Slovenia Zumtobel Licht d.o.o. Dunajska cesta 159 1000 Ljubljana T +386/(1) 56 09 80 F +386/(1) 56 09 866 M slovenija@zumtobel.si www.zumtobel.si Russia Zumtobel Lighting GmbH Official Representative Office Skakovaya Str. 17 Bld. No 1, Office 1104 15040 Moscow T +7/(495) 945 36 33 F +7/(495) 945 16 94 www.zumtobel.ru Norway Zumtobel Belysning Pilestredet 75 C 0354 Oslo Postbox 589 Majorstuen 0308 Oslo T +47 46 85 00 F +47 46 85 0 M firmapost@zumtobel.com www.zumtobel.no Sweden Zumtobel Belysning Birger Jarlsgatan 57 113 56 Stockholm T +46 8 6 6 50 F +46 8 6 56 05 M info.se@zumtobel.com www.zumtobel.se Denmark Light Makers AS Indiavej 1 100 København/Copenhagen T +45 35 43 70 00 F +45 35 43 54 54 M lmsales@lightmakers.dk www.lightmakers.dk Headquarters Zumtobel Lighting GmbH Schweizer Strasse 30 Postfach 7 6851 Dornbirn, AUSTRIA T +43/(0)557/390-0 F +43/(0)557/ 86 Zumtobel Licht GmbH Grevenmarschstrasse 74-78 3657 Lemgo, GERMANY T +49/(0)561 1-0 F +49/(0)561 1-7777 www.zumtobel.de www.zumtobel.com

ARCOS Spotlight System Highest sensibility for art and culture the new spotlight system for museums and exhibitions. www.zumtobel.com/arcos