Ordering number : EN9B SBE80 Schottky Barrier Diode 0V, 0.A, Low IR http://onsemi.com Features Low forward voltage (VF max=0.v) Fast reverse recovery time (trr max=0ns) Composite type with diodes contained in the CPH package currently in use, improving the mounting efficiency greatly The chips incorporated are both equivalent to the SB0-0C Specifications Absolute Maximum Ratings at Ta= C (Value per element) Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 0 V Nonrepetitive Peak Reverse Surge Voltage VRSM V Average Output Current IO 00 ma Surge Forward Current IFSM 0Hz sine wave, cycle A Junction Temperature Tj -- to + C Storage Temperature Tstg -- to + C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) 0A-00.8 0.9 0.6.6 0.6 0..9 4 0.9 0.4 0. 0.0 0. : Cathode : Cathode : Anode 4 : No Contact : Anode CPH SBE80-TL-E SBE80-TL-W Product & Package Information Package : CPH JEITA, JEDEC : SC-4A, SOT- Minimum Packing Quantity :,000 pcs./reel Packing Type : TL Electrical Connection TL 4 Marking SE LOT No. Semiconductor Components Industries, LLC, 04 January, 04 4HK TC-0000880/99 TKIM/O00 TSIM No.9-/
SBE80 Electrical Characteristics at Ta= C (Value per element) Parameter Symbol Conditions Ratings min typ max Unit Reverse Voltage VR IR=0µA 0 V Forward Voltage VF IF=00mA 0. V Reverse Current IR VR=V 0 ma Interterminal Capacitance C VR=0V, f=mhz 6 pf Reverse Recovery Time trr IF=IR=00mA, See specified Test Circuit. 0 ns Thermal Resistance Rth(j-a) 00 C / W trr Test Circuit Duty 0% 00mA 0mA 0µs 0Ω 00Ω 0Ω 00mA V trr Ordering Information Device Package Shipping memo SBE80-TL-E Pb-Free CPH,000pcs./reel SBE80-TL-W Pb-Free and Halogen Free No.9-/
SBE80 Forward Current, I F -- A.0 0. 0.0 IF -- VF 0 0. 0. 0. 0.4 0. 0.6 0. Forward Voltage, V F -- V ITR0 Ta= C C C -- C C -- VR f=mhz Reverse Current, I R -- µa 000 00 0.0 0. 0 IR -- VR Ta= C 00 C C 0 C C 0 0 0 Reverse Voltage, V R -- V ITR08 IS -- t Current waveform 0Hz sine wave Interterminal Capacitance, C -- pf 00 0 Surge Forward Current, I S (Peak) -- A 6 4 I S 0ms t.0 0 00 Reverse Voltage, V R -- V ITR09 0 0.0 0..0 Time, t -- s ITR00 No.9-/
SBE80 Outline Drawing SBE80-TL-E, SBE80-TL-W Land Pattern Example Mass (g) Unit 0.0 * For reference mm Unit: mm 0.6.4.4 0.9 0.9 No.9-4/
SBE80 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.9-/