Long rm ook lamps ook lamps Long rm-plain & Tapped OOK LMPS ap Screw UNIT'S VRY VRSTIL OOK LMPS ap Screw J LON RM OOK LMPS SOKT +.0000 -.0010 Precision round TPP LON RM OOK LMPS SOKT UNIT OOK LMPS R VILL WIT PLIN OR TPP RMS. The TPP RM LMPS are slightly larger than the Plain rm type and utilize many different threaded contact bolts and spindles. Shown below are other holders such as Riser ylinders and Screw Pads. K eat Treated lloy Steel K Precision round O.. +.0000 -.0010 I.. +.0007 -.0015 The ideal lamp for work where space is severely limited. '' dimension is precision for reamed hole mounting. ook is spring loaded for quick release and swing away from work piece. OOK LMP OLRS OLR SIZ T I +.0000 -.0100 LON RM SOKT J K L M U-921176 SMLL 5/16-18 1".7500 1-7/16 2-5/16 7/8 3/8 5/16-18x2.00 29/32 15/16 15/16 U-921178 MIUM 1/2-13 2" 1.0000 2-1/2 3-1/2 1-1/4 11/16 1/2-13x3.00 1-17/32 1-9/16 1" U-921180 LR 5/8-11 2" 1.2500 2-7/8 3-7/8 1-7/16 7/8 5/8-11x3.25 1-17/32 1-9/16 1" TPP LON RM SOKT U-921182 SMLL 5/16-18 1-3/16.7500 1-7/16 2-5/16 7/8 3/8 5/16-18x2.00 15/16 5/16-18 29/32 15/16 15/16 U-921184 MIUM 1/2-13 2-3/8 1.0000 2-1/2 3-1/2 1-1/4 11/16 1/2-13x3.00 1-13/16 1/2-13 1-17/32 1-9/16 1" U-921186 LR 5/8-11 2-3/8 1.2500 2-7/8 3-7/8 1-7/16 7/8 5/8-11x3.25 1-13/16 5/8-11 1-17/32 1-9/16 1" ook lamps are used with Support ylinders, olders and Screw Pads. SIZ X 32 10-4-99 RISR Refer To Page 29. lampers' avorite Variety! OLR OOK LMP OLRS O.. OL T ole Preparation lack Oxide finish T P OOK LMP +.0008 +.0015 U-921164 SMLL 2-1/4 7/8 1" 3" 5/16-18 2".7500 15/16 U-921166 MIUM 3-1/8 1-7/16 1-9/16 4-3/8 1/2-13 2-5/8 1.0000 1-9/16 U-921168 MIUM 4" 1-7/16 1-9/16 5-1/4 1/2-13 2-5/8 1.0000 1-9/16 U-921170 LR 3-1/8 1-3/4 2" 4-3/8 5/8-11 2-5/8 1.2500 1-9/16 U-921172 LR 4" 1-3/4 2" 5-1/4 5/8-11 2-5/8 1.2500 1-9/16
asy ccess lamps ook and Swing lamps ook is spring-loaded, releases quickly and swings away from work piece. SOKT N X NUT OOK LMPS SOKT X NUT SOKT X NUT +.000 -.001 SOKT P SRW STYL T JW LNT JW WIT JW TIKNSS STU P SRW U-921107 U-921105.625 1-3/8 11/16 7/16 1/2 5/16-18 x 2-1/2 5/16-18 x 1-3/4 U-921113 U-921110.874 2-1/4 1" 9/16 19/32 1/2-13 x 4 3/8-16 x 3 U-921117 U-921115.999 2-9/16 1-3/16 3/4 13/16 1/2-13 x 4-1/2 1/2-13 x 3-1/2 U-921122 U-921120 1.124 2-9/16 1-7/16 7/8 7/8 5/8-11 x 5 1/2-13 x 3-1/2 X NUT STYL eat Treated lloy Steel lack Oxide finish SWIN LN S SWIN SWIN LMPS dd 'N' for elrin lamping Pad. KNO NL KNO NL LN S Knob swings for quick clamp assemblies. Post Mount is ideal for limited spaces. Swings 360º. owel Pin mount holes are provided in lange ase to establish stop holes. Swivel screw pads stop turning with pressure and prevent marring of work piece. LN 360º SWIN LN SPINL T OL LIN OL LIN P SRW U-921200 U-921202 1-1/2.561 5/8 5/16-18 3/4 1" #10 U-921205 U-921211 2".874 1-1/8 1/2-13 1-1/8 1-3/8 1/4 U-921207 U-921213 2-1/2.874 1-1/8 1/2-13 1-1/8 1-3/8 1/4 U-921219 U-921223 4" 1.124 1-3/8 5/8-11 1-1/4 1-1/2 3/8 SWIVL STOPS ROTTION ON ONTT. SWIVL OOT OMPNSTS OR IRRULR SURS. SWINS 360º LT OR RIT. 12200 WOORU V. OWNY, 90241-5608 TLPON (562) 803-1521 / (800) 421-3466 IN / (800) 486-3466 X (562) 803-6898 / (800) 486-3465 MIL united@ucc-udb.com WSIT www.ucc-udb.com 2-7-02 33
djustable Leveling lamps djustable 5-Level lamps STY-TOTR JUSTL SRIS UNIT s Versatile djustable 5-Level lamp sports a fully adjustable round tipped front strap and a self-aligning rear support. U-850210 Ready for precision drilling and milling! Supported securely! TURS 1 ast Set-Up. 2 lamps on even work surfaces. 3 ll lamp parts stay together. 4 Position at 5 different levels. lways use two or three clamps on major projects. Shown above: Two Leveling lamp ssemblies and one Low Profile edding Support lamp (See page 28). Order as U-850210 5 Levels: 0, 1/2, 1", 1-1/2, and 2". 6 Multi-functional one-step clamping, leveling and locating. 7 onvenient and easy to use. 8 Tighten either the lange Nut or the Rear Support. 9 llows clamping of slightly uneven work pieces. 10 Strong enough for most applications yet soft enough to avoid cutter damage. LVL (TIKNSS) IT ±.0005 MINIMUM MXIMUM 0 1 2 3 4 0.500 1.000 1.500 2.000 2" 1-9/16 1-1/16 9/16 0 3" 2-1/2 2" 1-1/2 1" 11 The T-Slot olt and lamp Strap are heat treated and hardened. 12 The hardened Level Steps are ground to ±.0005 inch accuracy. 13 The lamp unit is complete as shown. No additional parts needed. 34 6-16-99 lampers' avorite Variety!
Removable Speed lamp ssembly SUR, SPY, IINT and PRTIL LMPIN! Speed lamp ssembly Removable Type RMOVL LMP SSMLIS 10 8 JM NUT OLT 6 4 3 1 2 7 5 OPTIONL SPRIL WSR OR LN NUT WORK PI 12 8 11 IXTUR PLT 9 INSRT INSRT 9 Press the hardened steel insert into the fixture plate. Place the bayonet T-olt thru the bushing and turn the knob one quarter turn to clamp lock the assembly. Tighten the speed handle or flange nut to secure work piece in place. 12200 WOORU V. OWNY, 90241-5608 TLPON (562) 803-1521 / (800) 421-3466 IN / (800) 486-3466 X (562) 803-6898 / (800) 486-3465 MIL united@ucc-udb.com WSIT www.ucc-udb.com 8-13-02 TO US the SSMLY: RPLMNT PRTS LIST 1 U-948800 4 IN STRP 2 U-948805 5-1/2 IN STRP 3 U-948810 7 IN STRP 4 U-942220 5/8-11 x 8 OLT 5 U-926270 SPRIL WSR 6 U-945375 SP NL 7 U-925170 LN NUT 8 U-925420 JM NUT 9 U-949120 INSRT 10 U-945635 N KNO 11 U-936025 SPRIN 12 U-926650 WSR UNIT's RMOVL SP LMP SSMLY features: speed ball handle for faster more efficient and secure clamping adjustments. Our spherical washers or flange nuts compensate for differences in work piece. Quick release by the spring loaded clamp strap assembly. ll parts are black oxide finish except the cadmium plated cast iron hand knob and speed handle. dd 'SN' to Part No. for optional Spherical lange Nut and Washer. LMP SSY * OPTIONL LN NUT INLUS U-945375 6" SP NL U-921050 3/4 1/2 4" 1.626 1-7/8 5/8 1" 5/8-11x8 U-925170 U-921052 3/4 1/2 5-1/2 1.626 1-7/8 5/8 1" 5/8-11x8 U-925170 U-921054 3/4 1/2 7" 1.626 1-7/8 5/8 1" 5/8-11x8 TR INLUS U-945390 8" SP NL U-921060 1" 2" 4" 1.876 2-1/4 13/16 1-1/8 3/4-10x10 U-925175 U-921064 1" 2" 7" 1.876 2-1/4 13/16 1-1/8 3/4-10x10 3/4-10 T * Other lengths available on quotation. 35
itch alls & dapter Tooling all olders itch alls and dapter Tooling all olders IT LLS POLIS ROM US the STRONST! One piece construction old formed itch all ccurate threads provide secure and safe fastening. WRRNTY UNIT IT LLS have been certified by MV in compliance with overnment regulations. Specifications are certified to meet or surpass the Standards set forth in Vehicle Safety Regulations as shown in the chart below. If part should prove defective in materials or workmanship (except for plating) within one year, it may be returned for replacement at no charge. UNIT limits responsibility to replacement of part found defective. Nut and Lock Washer included. ll dimensions shown are nominal. inished and Stocked in Polished hrome. vailable in Zinc plated or Oil inish as Specials. IT LL U-183401 LSS 1 2,000 LS. U-183402 LSS 2 3,500 LS. U-183403 LSS 3 5,000 LS. U-183404 LSS 4 6,000 LS. U-183405 LSS 5 10,000 LS. RTIN 1-7/8 3/4 29/32 2-5/8 1-1/2 2 3/4 31/32 2-3/4 2 2 1 1-1/8 2-3/4 2 2-5/16 1 1-1/4 3-1/8 2 2-5/16 1-1/4 1-1/4 3-1/8 2-1/4 PTR TOOLIN LL OLRS UNIT dapter Tooling all olders were designed for easy handling of tooling balls. The Tooling all older is adjusted to the exact position required and then held securely in place without marring the shank of the tooling ball. 36 5-4-09 lampers' avorite Variety!