UNITED s New Bucking Bars
|
|
- Percival White
- 5 years ago
- Views:
Transcription
1 ucking ars FETURES: UNITED carefully manufactures Quality First ucking ars On Time. UNITED s New ucking ars Maximum strength ars Superior design and wear under the most severe conditions Cast ars manufactured to top standards with high grade tool steel, heat treated to RC ars can be reused repeatedly Fabricated Custom ars machined from superior bar stock Hardened to develop tough working surfaces Highly polished to MRS 32 finish, black oxide finish, identifiable by engraved numbers Repairable, reusable, mag particles inspected to avoid cracks, fissures and assure long life PPLICTIONS: For use under severe conditions where solid strength and performance are required. UNITED UCKING R STYLES UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC U24 UNITED ucking ars re Your est uck!
2 ucking ar Styles and Dimensions ucking ars UNITED s TWO ucking ar Types: CST Clearly identified bars Nonporous High grade tool steel Heat treated to Rockwell Can be re-worked several times without more heat treating FRICTED Part Numbers engraved, Dated, lack Oxide finish Machined from steel and can be refurbished Hardened for strong tough working surface - RC Satin-finished working area - Mag particle inspected Mirror-polished bucking surface on request to MRS UNITED UCKING R STYLES UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC C WT-LS C WT-LS UCC " 1/2 1/2 1-1/4 UCC " 5/8 5/16 1/4 UCC " 3/4 3/4 1/2 UCC " 1" 3/4 1-1/4 UCC " 1" 1" 1 UCC " 2" 1" 3-1/2 UCC UCC " 1-1/2 1-1/2 2-1/2 UCC " 2" 1-1/2 4-1/4 UCC " 2" 2" 4-1/2 UCC " 2" 2-1/2 8-1/2 UCC " 1/2 1/4 1/8 UCC " 4" 3" WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U25
3 ucking ar ttachments UNITED s ucking ars & ttachments Our ucking ars Reduce Shock and Decrease Vibrations! PPLICTIONS: For use in difficult areas or hard-to-get-to places and under severe conditions where steady strength and sure performance are required. CUTION: Eye Protection must be used when working with ucking ars. ucking ars sold separately or in UNITED Kits - See ttachments below. UNITED UCKING R STYLES UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCKING R TTCHMENTS: Sold separately or as a set, in UCC K Kits. Special design has adjusting screw for increasing or decreasing spring tension according to rivet size. Comfortable cushioned handle reduces vibration. UCC L UCKING R TTCHMENT UCC FLT UCKING R TTCHMENT UCC UNIVERSL UCKING R TTCHMENT UCC MINI-STNDRD TTCHMENT WITH HNDLE UCC STNDRD UCKING R TTCHMENT UNITED ucking ars re Your est uck! U
4 Plate Nut Drill Jig Types and Styles UNITED s UCC 518xxx Series Plate Nut Drill Jigs FOR INSTRUCTIONS & DETILS, SEE PGS. U28-U35. STYLE TWO HOLES TWO LUGS SELECT: S STNDRD RIVET SPCING DOULE-WING TWO WING R REDUCED RIVET SPCING DOULE-WING, TWO WING MINITURE OR MICRO-MINITURE STYLE ONE HOLE TWO LUGS SELECT: S STNDRD RIVET SPCING SINGLE-WING ONE WING R REDUCED RIVET SPCING SINGLE-WING, ONE WING MINITURE OR MICRO-MINITURE STYLE C CORNER ONE HOLE TWO LUGS SELECT: CS STNDRD RIVET SPCING MICKEY MOUSE CR REDUCED RIVET SPCING MICKEY MOUSE MINITURE OR MICRO-MINITURE STYLE D SIDE-Y-SIDE ONE HOLE TWO LUGS SELECT: DS STNDRD RIVET SPCING DR REDUCED RIVET SPCING SHORT WING OR SHORT LUG MINITURE OR MICRO-MINITURE WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U27
5 Plate Nut Drill Jigs Two Lug Plate Nut Drill Jigs UCC 518XXX SERIES TYPES S TWO LUGS TWO HOLES NCHOR PLTE NUT STNDRD RIVET SPCING DOULE- WING OR TWO-WING S TWO LUGS TWO HOLES STNDRD RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot Diameter size C. Lug Nut requires and. HOLE PTTERN UNITED Drill C Jig D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC U28 C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UNITED ucking ars re Your est uck! C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC
6 Two Lug Plate Nut Drill Jigs Plate Nut Drill Jigs R TWO LUGS TWO HOLES NCHOR PLTE NUT UCC 518XXX SERIES TYPES REDUCED RIVET SPCING DOULE- WING OR TWO WING MINITURE OR MICRO- MINITURE R TWO LUGS TWO HOLES REDUCED RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot HOLE PTTERN Diameter size C. Lug Nut requires and. UNITED Drill C Pilot DI Jig D Rivet Hole UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U29
7 Plate Nut Drill Jigs Two Lug Plate Nut Drill Jigs UCC 518XXX SERIES TYPES S TWO LUGS ONE HOLE NCHOR PLTE NUT STNDRD RIVET SPCING SINGLE- WING OR ONE-WING S TWO LUGS ONE HOLE STNDRD RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot Diameter size C. Lug Nut requires and. HOLE PTTERN UNITED Drill C Pilot DI Jig D Rivet Hole C D UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC U30 UNITED ucking ars re Your est uck!
8 Two Lug Plate Nut Drill Jigs Plate Nut Drill Jigs R TWO LUGS ONE HOLE NCHOR PLTE NUT UCC 518XXX SERIES TYPES REDUCED RIVET SPCING SINGLE-WING OR ONE WING. MINITURE OR MICRO- MINITURE R TWO LUGS ONE HOLE REDUCED RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot HOLE PTTERN Diameter size C. Lug Nut requires and. UNITED Drill C Pilot DI Jig D Rivet Hole C D UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U31
9 Plate Nut Drill Jigs Corner 2-Lug Plate Nut Drill Jigs UCC 518XXX SERIES TYPES CS TWO LUGS ONE HOLE NCHOR PLTE NUT STNDRD RIVET SPCING MICKEY MOUSE CS TWO LUGS ONE HOLE STNDRD RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot Diameter size C. Lug Nut requires and. HOLE PTTERN UNITED Drill C Pilot DI Jig D Rivet Hole C D UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC U32 UNITED ucking ars re Your est uck!
10 Corner 2-Lug Plate Nut Drill Jigs Plate Nut Drill Jigs CR TWO LUGS ONE HOLE NCHOR PLTE NUT UCC 518XXX SERIES TYPES REDUCED RIVET SPCING MICKEY MOUSE MINITURE OR MICRO- MINITURE CR TWO LUGS ONE HOLE REDUCED RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot HOLE PTTERN Diameter size C. Lug Nut requires and. UNITED Drill C Pilot DI Jig D Rivet Hole C D UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U33
11 Plate Nut Drill Jigs Side-y-Side Plate Nut Drill Jigs UCC 518XXX SERIES TYPES DS TWO LUGS ONEHOLE NCHOR PLTE NUT STNDRD RIVET SPCING DS TWO LUGS ONE HOLE STNDRD RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot Diameter size C. Lug Nut requires and. HOLE PTTERN UNITED PRT NO. Drill C Pilot DI Jig D Rivet Hole C D C D C D LL LNK CHRT U34 UNITED ucking ars re Your est uck!
12 Side-y-Side Plate Nut Drill Jigs Plate Nut Drill Jigs DR TWO LUGS ONE HOLE NCHOR PLTE NUT UCC 518XXX SERIES TYPES REDUCED RIVET SPCING SHORT-WING OR SHORT LUG MINITURE OR MICRO- MINITURE DR TWO LUGS ONE HOLE REDUCED RIVET SPCING Select your UNITED Part Number by Drill (rivet) size D and then by Pilot HOLE PTTERN Diameter size C. Lug Nut requires and. UNITED Drill C Pilot DI Jig D Rivet Hole C D UCC C D UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC UCC WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U35
13 UD-34D Pin Position Gauge Pin Position Gauge Locking Pin nd Swage ENLRGED VIEW OF POINTS UD N..S. GUGE NO. NOMINL SIZE C ±.001 D ±.001 UD-34D-9 34D UD-34D-10 34D UD-34D-11 34D UD-34D-1 34D & UD-34D-2 34D UD-34D-3 34D & UD-34D-4 34D UD-34D-5 34D & UD-34D-6 34D UD-34D-7 34D & UD-34D-8 34D PIN POSITION GUGE These gauges are designed to inspect the position of the installed swage locking pins in relation to the sheet line or work surface, verifying that the correct length of fastener was installed. PIN POSITION and SWGE GUGE These gauges, in addition to inspection of proper grip length, are also designed to inspect the swaged collar in relation to the sheet line or work surface to determine that the installed collar is completely and sufficiently swaged. USGE INSTRUCTIONS FOR UD-34D and 75, EXCEPT 75-6 and 75-7 See next page. 1. Point Touches Pin 2. Legs of Gauge Clear Sheet Line 3. Pin is cceptable 4. Gauge Pin with Touch-No Go End U36 1. Point Does Not Touch Sheet Line. 2. Legs of Gauge Touch Sheet Line 3. Pin Grip is Too Short. gainst Slopes, Use Gauge in Plane Point Does Not Touch Pin 2. Legs of Gauge Touch Sheet Line 3. Points Do Not Touch Collar 4. Pin Grip and Collar Swage is cceptable 5. Gauge Pin with Touch-Go End 1. Point Touches Pin 2. Legs of Gauge Clear Sheet Line 3. Points Touch Collar 4. Pin is Too Long 5. Collar is Not Swaged Enough UNITED ucking ars re Your est uck!
14 Inspection Gauges UD-75 UD-75-1 THRU 5 and 8 SHOWN on PREVIOUS PGE UD N..S. GUGE NO. NOMINL SIZE C D E F G H UD UD & UD UD UD UD UD UD TO USE PIN POSITION ND SWGE GUGES UD-75-6 and UD-75-7, OTH STEP 1 ND STEP 3 or STEP 4 MUST CCEPT. STEP 1 Point Touches Stump and Legs of Gauge Clear Sheet. Go to Step 2, if Point Clears Stump when Legs of Gauge Touch Sheet. REJECT STEP 2 If Point Does Not Touch Pin, go to Step 3. If Point Touches Stump, go to Step 4. STEP 3 STEP 4 Point does Not Touch Stump. Grip is Not Under Minimum. Points Do Not Touch Collar. Collar Swaged enough. CCEPT Point Touches Stump. Grip is Under Minimum and/or Points Touch Collar. Collar Not Swaged enough. REJECT Same procedure as Step 3 Except use Side 4 of Gauge WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U37
15 UD-85 Pin Position Gauge UD-85 PIN POSITION and SWGE GUGES Pin Position nd Swage UD N..S. GUGE NO. NOMINL SIZE C D ±.001 E ±.001 UD / UD / UD & / UD / UD & / UD / UD / UD & / UD / UD / UD & / UD / USGE INSTRUCTIONS FOR UD-85, EXCEPT See next page. UD-76 and UD-90 PIN POSITION GUGES E See next page For UD I 1. Points Touch Pin 2. Legs of Gauge Clear Sheet Line 3. Pin is cceptable 4. Gauge Pin with Touch-No Go End II 1. Points Do Not Touch Pin 2. Legs of Gauge Touch Sheet Line 3. Pin Grip is Too Short. UD N..S. GUGE NO. USGE INSTRUCTIONS FOR UD-76 and UD-90 NOMINL SIZE III IV 1. Points Do Not Touch 1. Points Touch Pin Pin 2. Legs of Gauge 2. Legs of Gauge Touch Clear Sheet Line Sheet Line 3. Points Touch 3. Points Do Not Touch Collar Collar 4. Pin is Too Long 4. Pin Grip and Collar Swage is cceptable 5. Collar is Not Swaged Enough 5. Gauge Pin with Touch-Go End D ±.001 E ±.001 UD-76-# UD & UD & UD & UD & UD-90-# UD UD UD UD UD UD Points Touch Pin 2. Legs of Gauge Clear Sheet Line 3. Pin is cceptable 4. Gauge Pin with Touch-No Go End 1. Points Do Not Touch Pin 2. Legs of Gauge Touch Sheet Line 3. Pin Grip is Too Short. 1. Points Do Not Touch Pin 2. Legs of Gauge Touch Sheet Line 3. Pin is acceptable 4. Gauge Pin with Touch-Go End 1. Points Touch Pin 2. Legs of Gauge Clear Sheet Line 3. Pin is Too Long U38 UNITED ucking ars re Your est uck!
16 Pin Position nd Swage UD Pin Position Gauge UD PIN POSITION and SWGE GUGES SWGE and PIN POSITION PROFILE GUGE FOR 3/16" STNDRD PULL TYPE OLTS. UD N..S. GUGE NO. UD NOMINL SIZE.190 & C D ± E F G H J HOW TO USE PIN POSITION ND SWGE GUGES UD STEP 1 USE STRT. If Copper Plate Finish touches the Sheet, see Step 2 below. If lack Touches the Pin, see Step 3 below. STEP 2. Check Pin Position: Legs Must Not Touch the Sheet. STEP 3. Check Pin Position: Legs Must Touch the Sheet. USE COPPER PLTE. Check Swage: Legs Must Touch the Sheet. USE LCK. Check Swage: Legs Must Touch the Sheet WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / (800) FX (562) / (800) EMIL united@ucc-udb.com WESITE U39
Multi-Purpose Handles Lift, Pull, Cabinet and Finger
Multi-Purpose Handles from UNITED Multi-Purpose Handles Lift, Pull, Cabinet and Finger LIFT Fixtures Cabinets ZINC PLTED WROUGHT STEEL UNITED'S UNIVERSL FVORITE! Strong Simple Quick Installation Widely
More informationMaster TAPERLOCK GAUGE BLOCK
Master Taperlock Fastener Gauge Kit Master TAPERLOCK Fastener Gauge Kit UTK-268002-27-4 KIT, Group 1 thru 4 UNITED S Master Taperlock Fastener Gauge Kit contains all of the required gauges and tools to
More informationNew Jigs to Close Space Nurlock Adapter Tips, Liners, Locating Lock Screws and TLC Clamps
New Jigs to Close Space Nurlock dapter Tips, Liners, Locating Lock Screws and TLC Clamps New Universal Locating and Spacing Fixtures, Nurlock Shanks, Collars, Lock Screws and TLC Clamps. Spacing and location
More informationUniSert Kit Assortments
Repair Kits UniSert Kit Assortments Each assortment contains the insert tools you need. The convenient durable case permits super clear storage and organization. Threaded Inserts UniSert Kit Assortments
More informationLeveling and Support. Support from UNITED is on the Level
Leveling and Support Support from UNITED is on the Level FST-LOK LMP ROUND BR Pg H2 SPRING JK LOKS Pg H10 STEEL SOKET LEVELING PDS Pg H12 USHIONED UNI-PDS Pg H17 FIXTURE JKS Pg H18 JIG LEVELING FEET &
More informationSpherical Buttons and Button Jig Feet
Spherical uttons and Jig Feet SPHERIL RIUS LOTOR UTTONS Spherical uttons and utton Jig Feet SPHERIL RIUS LOTOR UTTONS provide single point contact f irregular surfaces and are manufactured f Press Fit
More informationHAND TOOLS. Carpenters Square. Basic Combination Set 520 Series
Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm
More informationWelding Thunder 2015 Fold-and-Go Picnic Table
Welding Thunder 05 Fold-and-Go Picnic Table DRWN James Veldhuis 8/0/05 rizona Western College Q PPROVED SCLE / TableFrameWithRecievers SHEET OF CUT LIST QUNTITY DIMENSION " Tubing.05 Wall 9" " Tubing.05
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationTaper Lock Tooling and
Taper Lock Tooling System Taper Lock Tooling and For Drilling, Reaming, Countersinking, Tolerancing, THE TAPER LOCK STORY and HELPFUL TIPS The Taper Lock Fastener System builds structures together and
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationCable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
More informationHeat Treated Alloy Steel A B
Long rm ook lamps ook lamps Long rm-plain & Tapped OOK LMPS ap Screw UNIT'S VRY VRSTIL OOK LMPS ap Screw J LON RM OOK LMPS SOKT +.0000 -.0010 Precision round TPP LON RM OOK LMPS SOKT UNIT OOK LMPS R VILL
More informationTable of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationPLATE LIFTING CLAMPS
LIFTING YOUR USINESS TO HIGHER LEVEL LIFTING YOUR USINESS TO HIGHER LEVEL LIFTING YOUR USINESS TO HIGHER LEVEL PLTE LIFTING LMPS Operational Instruction Manual Universal Plate lamp Model: UP-1 Horizontal
More informationFace Mount to Through-the-Post Mount
Face Mount to Through-the- Mount Cable Runs through Two Corners When going around two corners, it s necessary to tension the cable from both ends as shown in Deck 4. Use the 672 series The tensioning devices
More informationUSA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Rivet Solutions E2384 V1 (1/18) V1 (1/18)
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Rivet Solutions E2384 V1 (1/18) V1 (1/18) LAWSON PRODUCTS RIVET SOLUTIONS Rivets A rivet is a mechanical fastener that provides
More informationDrill Bit Sharpening Attachment. Parts
Parts Base Plate Guide Drill Holder Setting Template Magnifier Instruction Drill Bit Sharpening Attachment With the patented Tormek Drill Bit Sharpening Attachment DBS-22, you can sharpen your drill bits
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationLok Fast Column Clamp General Information
Lok Fast Column Clamp General Information Gates Lok-Fast Column Clamp Has These Advantages: Can Be Job Built Gang Formed No Loose Pieces Designed For Rapid Placement of Concrete Rapid Locking Action 3
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationMake your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing.
Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing. 1 Feeney makes it easy The CableRail cable infill system is slender,
More informationAUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE.
AUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE. ALCOA FASTENING SYSTEMS & RINGS. DRIVING AUTOMOTIVE FASTENING TECHNOLOGY FOR MORE THAN 5 DECADES. At Alcoa Fastening Systems & Rings (AFSR), we understand automotive
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationExcellent High Quality Economical Handwheels
UNITD Top Quality Handwheels xcellent High Quality conomical Handwheels UNITD'S UNITIZD* HIGH QUALITY LUSTROUS ALUMINUM HANDWHLS WITH OR WITHOUT OR Preferred f their real quality, long wear and good economy.
More informationNOTE THAT THE HANDLE IS BELOW THE LOCK BASE
NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationAUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS
WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to
More informationCrimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationTechnical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
More informationCable Cutter Square. 25 Tape Measure. Chalk Line Level Loctite 242 Blue
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
More informationUSSC LLC - GSS LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 15 A 1. PURPOSE: Instructions for replacement of Diamondback Upholstery. 2. SCOPE: Diamondback Gunner Seats. 3. PROCEDURE: 3.1. Materials Required: 3.1.1. (QTY :1) 33102401-1C UPH/FLIP BACK CORDURA
More informationTAPTITE 2000 Fasteners
TAPTITE 2000 Fasteners Unique Design Increases Performance TAPTITE 2000 fasteners are designed to provide the benefits of previous TAPTITE fastener products with an innovative new thread design the Radius
More informationDesign Drives Efficiency
Design Drives Efficiency EZ Breaker Chain Breaker EZ Chain Rack EZ Chain Wear Gauge EZ Breaker Chain Breaker Made in U.S.A. EZ BREAKER is a compact, easy to use tool for cutting roller chain. This simple,
More informationMade in USA. Download a full set of drawings from MorrisonandMarvin.com. Vise Assembly MORRISON & MARVIN ENGINE WORKS
Download a full set of drawings from MorrisonandMarvin.com Made in US DESIGNED Y DRWN Y ox 555 enton City, W 99320 US 4:1 Vise ssembly 1 of 18 1 14 3 6 7 18 5 2 11 12 9 10 13 1 15 16 17 Download a full
More informationOther Types Of Bushes
Other Types Of Bushes Circuit board drill bushes: Designed to accommodate larger shank for making drill on circuit board Chip breaker bushes: Designed with chip breaking notch. Reduces friction and heat
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationReplacing worn out MS hinges
Replacing worn out MS hinges C. Zavatson, 4-3-2014, rev A For the hinging of ailerons, flaps, inboard gear doors and the elevators of the small tail, Lancair utilized MS20001 hinge material. Unfortunately
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationSteady Freddy Vinyl Gate REALLY. Important stuff to know about installing your WamBam gate
Steady Freddy Vinyl Gate RELLY Important stuff to know about installing your Wamam gate. 1-877-778-5733 www.wambamfence.com CLEVER JOE Your Installation uddy This Gate is lso Designed to Fit the ig en
More informationTable of Contents Heavy Duty Extra Long Poly Blade
Table of Contents Heavy Duty Extra Long Poly Blade Arctic Heavy Duty Poly Blade 90" & 96" (Blade, Quadrant & A-frame)... 2 Power angling installation.....7 Shock absorber installation....12 Pro-Wings installation..
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationDesign a drill jig for drilling 4 holes in the following component.
Design a drill jig for drilling 4 holes in the following component. Design procedure for Jig a. Selection of Jig A leaf (or) latch jig is selected to accomplish this component. The leaf is hinged on one
More informationSets Punches Chisels Pry Bars Hammers
Sets Punches Chisels Pry Bars Hammers SET NO. 46 26 PC. PUNCH AND CHISEL SET 4 8 Center Punch 4 7 4 2 Center Punch 2" 5 5 44 5 6 Prick Punch 5 6" 5" 47 4x 2 Drive Pin Punch 5 4" 4 6" 47 5 6x 8 Drive Pin
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationJabiru Installation instructions
Page 1 of 5 s Step Description 1 Mark out centre line of the installation 2 Align centre line of installation with the centre line of the "Front Panel Cut out" template. Align "FLOOR" on template with
More informationINSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT
INSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT QUANTITY DESCRIPTION 2 POWER TRAK, 5 FT LG 4 END CAPS, YELLOW 10 SCREWS, 1 5/8 LG 10 WASHERS, 5/8
More informationFastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
More informationA Metal Polishing Jig. By Norm Berls
A Metal Polishing Jig By Norm Berls Why make a metal polishing jig Objective: polish small steel parts to a mirror-like finish. Silicon Carbide abrasive paper works well under certain conditions. Paper
More informationFord Pick Up Rear leaf Spring Kit Installation Instructions
1948-1956 Ford Pick Up Rear leaf Spring Kit Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Parts 48 inch leaf (2) springs (4) U-bolts 3/8-24 x l 1/4bolts (16) & nuts (2) 1/2-20 x 4
More informationSeamers, Folding Tools & Brake
Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 SET-UP PROCEDURE PG. 4 REMOVING
More informationUSE AND CARE GUIDE FIXED LED / LCD TV WALL MOUNT (UNIVERSAL MOUNTING PATTERN, FITS VESA
Item #302-080 Model #50710 USE ND CRE GUIDE FIXED LED / LCD TV WLL MOUNT (UNIVERSL MOUNTING PTTERN, FITS VES 100/200/300/400/600) Questions, problems, missing parts? Before returning to the store, call
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationSL Let it Rain. Solutions for fast, precise cuts in thin walled K-Style & half round gutter.
SL15114 Let it Rain Solutions for fast, precise cuts in thin walled K-Style & half round gutter. Quick-Action Gutter Outlet Saws & Combination Arbor & High Speed Pilot Drill For downspout that always fits
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationInstallation & Assembly: Two Piece Suspended Ceiling Plate
Installation & ssembly: Two Piece Suspended Ceiling Plate Model: CMJ453 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
WITH MOUNTING BRACKET PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
More information788XL Dado Jig Owners Manual Please Read Carefully!
788XL Dado Jig Owners Manual Please Read Carefully! 788XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
More informationThe importance of precision cutting requires special accessories
Microstops and Drilling Accessories The importance of precision cutting requires special accessories to aide in drilling accuracy, providing tighter tolerances while protecting surface areas from skin-damage.
More information`48-`56 Ford Pickup Rear leaf Spring Kit Installation Instructions Tech Line:
`48-`56 Ford Pickup Rear leaf Spring Kit Installation Instructions Tech Line: 1-855-693-1259 www.totalcostinvolved.com CHECK ALL PARTS INCLUDED IN THIS KIT TO THE PARTS LIST BEFORE INSTALLING THE KIT.
More informationCOLLET FIXTURES, CHUCKS AND COLLETS FOR MACHINING CENTERS ROTARY TABLES MANUAL LATHES GRINDERS
OLLET FIXTURES, HUKS N OLLETS FOR MHINING ENTERS ROTRY TLES MNUL LTHES GRINERS ROYL QUIK-GRIP POWER-LOK HYRULI OLLET FIXTURES Extremely Fast ollet hanges hanging collets on a Royal Quick-Grip Power-lock
More informationDesign Engineering Manufacturing. CEMA Stock Components
Design Engineering Manufacturing CEMA Stock Components KWS profile Founded in 1972, KWS Manufacturing Company, Ltd, is the leader in the design and manufacture of conveying equipment for the bulk material
More informationSELF-CLINCHING STUDS AND PINS
SELF-LINING S ND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head
More informationChain, Rope & Accessories
A Perry Product Guide A range of both steel and plastic chain, including accessories. This range includes:- Steel Chain Plastic Chain Security Chain Accessories for Plastic Chain Accessories for Steel
More informationPeeping Tom Vinyl Gate REALLY. Important stuff to know about installing your WamBam gate
Peeping Tom Vinyl Gate RELLY Important stuff to know about installing your Wamam gate. 1-877-778-5733 www.wambamfence.com CLEVER JOE Your Installation uddy January 2015 Reality Check 1 - Read Over Fence
More informationJiminy Picket Vinyl Gate REALLY. Important stuff to know about installing your WamBam gate
Jiminy Picket Vinyl Gate RELLY Important stuff to know about installing your Wamam gate. 1-877-778-5733 www.wambamfence.com CLEVER JOE Your Installation uddy November 2014 Reality Check 1 - Read Over Fence
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationTUFTHRED - FRACTIONAL & METRIC SIZES
3 East Julie Street 800-3-119 (Voice) 90-733-741 (Fax) TUFTHRED - FRACTIONAL & METRIC SIZES No tapping is required; just drill out the damaged threads using fractional or wire gauge drill bits. Then screw
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 PowerLock Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationArchitectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationINSTALLATION GUIDE SPACE SAVER PARTITION CURRENT F DOOR. pro-gard.com STRONG RELIABLE SECURE
INSTLLTION GUIDE SPE SVER PRTITION 0 - URRENT F-0 - DOOR STRONG RELILE SEURE pro-gard.com.0.0 THESE OMPONENTS RE REQUIRED TO INSTLL THE PRTITION PRTS LIST REV SHEET UTHOR DTE QTY PRT NUMER X /-0 x / RRIGE
More informationROOFSAFE ANCHOR & CABLE
Installation Instructions ROOFSAFE ANCHOR & CABLE THE ULTIMATE IN FALL PROTECTION MANUAL Contents Guidelines for Installation 3 Top Bolt Installation 4 Toggle Installation 5 Concrete Installation 6 Component
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationRIVETS AND THREADED INSERTS
RIVETS AND THREADED INSERTS Tri-Clamp, Multi-Grip, Dome Head and Stainless Steel Rivets Multi-Grip Rivets Adapt to All Material Types and Thicknesses Threaded Inserts Install Threads Into Blind Areas and
More informationPlain Jane Vinyl Gate REALLY. Important stuff to know about installing your WamBam gate
Plain Jane Vinyl Gate RELLY Important stuff to know about installing your WamBam gate. 1-877-778-5733 www.wambamfence.com CLEVER JOE Your Installation Buddy 02.2017 Reality Check 1 - Read Over Fence Instructions
More information