MCH41 PNP/NPN Bipolar Transistor ( )V, ( )ma, VCE(sat) ; ( )19mV (max) Overview MCH41 is ( )V, ( )ma, VCE(sat) ; ( )19mV (max), PNP/NPN in 1 type MCPH, Bipolar Transistor. Electrical Connection Features Composite type with a PNP / NPN transistor contained in one package, facilitating high-density mounting Ultrasmall package permitting applied sets to be small and slim. Package : SC-88AFL / MCPH (. 1.6.8 mm) 4 1 1 : Base1 : Emitter Common : Base 4 : Collector : Collector1 Top view Typical Applications MOSFET gate drivers Relay drivers Lamp drivers Motor drivers ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data sheet. SPECIFICATIONS ( ) : PNP ABSOLUTE MAXIMUM RATINGS at Ta = C (Note 1) Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V CBO ( ) 4 V Voltage V CEO ( ) V Emitter-to Base Voltage V EBO ( ) V Collector Current I C ( ) ma Collector Current (Pulse) I CP PW 1 s ( ) A Collector Dissipation P C Mounted on a ceramic board (6mm x.8m). W Junction Temperature Tj 1 C Storage Temperature Tstg to +1 C Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS at Ta = C (Note ) Parameter Symbol Conditions Ratings min typ max Collector Cutoff Current I CBO V CB =( )V, I E = ( ) na Emitter Cutoff Current I EBO V EB =( )4V, I C = ( ) na DC Current Gain h FE V CE =( )V, I C =( 1)mA () () 8 Gain-Bandwidth Product f T V CE =( )V, I C =( )ma () 4 MHz Output Capacitance Cob V CB =( )1V, f=1mhz (4.). pf Saturation Voltage V CE (sat) I C =( )ma, I B =( )1mA ( 11) 8 ( ) 19 mv Base-to-Emitter Saturation Voltage V BE (sat) I C =( )ma, I B =( )1mA ( ).9 ( ) 1. V Collector-to-Base Breakdown Voltage V (BR) CBO I C =( )1 A, I E = ( ) 4 V Breakdown Voltage V (BR) CEO I C =( )1mA, R BE = ( ) V Emitter-to-Base Breakdown Voltage V (BR) EBO I E =( )1 A, I C = ( ) V Continued on next page. Unit Semiconductor Components Industries, LLC, 14 August 14 - Rev. 1 Publication Order Number : MCH41/D
Continued from preceding page. MCH41 Parameter Symbol Conditions Ratings min typ max Turn-ON Time ton See specified Test Circuit. ns Storage Time tstg See specified Test Circuit. (1) ns Fall Time t f See specified Test Circuit. () 4 ns Note : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Unit Switching Time Test Circuit PW=μs D.C. 1% IB1 IB OUTPUT INPUT VR RB RL Ω + + μf 4μF VBE= --V VCC=1V IB1= --IB=IC=mA For PNP, minus sign is omitted. Collector Current, IC -- ma -- --6 -- --4 -- -- -- --ma --4mA IC -- VCE --ma --ma --ma --1mA --1mA --ma --ma --ma --ma --1mA --μa Collector Current, I C -- ma 6 4 1mA ma ma ma IC -- VCE 1mA ma ma ma ma 1mA 4μA μa IB= -- -- -- --4 -- --6 -- --8 --9 -- Voltage, V CE -- mv IT49 IB= 4 6 8 9 Voltage, V CE -- mv IT8
MCH41 --8 IC -- VBE VCE= --V 8 IC -- VBE VCE=V -- Collector Current, I C -- ma --6 -- --4 -- -- Ta= C C -- C Collector Current, IC -- ma 6 4 Ta= C C -- C -- DC Current Gain, h FE --. --.4 --.6 --.8 --1. --1. Base-to-Emitter Voltage, VBE -- V IT hfe -- IC VCE= --V Ta= C C -- C DC Current Gain, hfe..4.6.8 1. Base-to-Emitter Voltage, VBE -- V IT8 hfe -- IC VCE=V Ta= C C -- C Saturation Voltage, V CE (sat) -- mv --1. --1 -- -- Collector Current, I C -- ma IT1 -- VCE(sat) -- IC I C / I B = -- Ta= C C -- C Saturation Voltage, VCE(sat) -- mv 1. 1 Collector Current, I C -- ma IT84 VCE(sat) -- IC I C / I B = 1 Ta= C C -- C Saturation Voltage, V CE (sat) -- mv --1 --1. -- -- --1 -- -- Collector Current, I C -- ma IT4 VCE(sat) -- IC I C / I B = Ta= C C -- C Saturation Voltage, VCE(sat) -- mv 1. 1. 1 Collector Current, I C -- ma VCE(sat) -- IC Ta= C -- C C IT8 I C / I B = --1 --1. --1 -- -- Collector Current, I C -- ma IT 1 1. 1 Collector Current, I C -- ma IT86
MCH41 --1 VBE(sat) -- IC IC / IB= 1 VBE(sat) -- IC IC / IB= Base-to-Emitter Saturation Voltage, V BE (sat) -- V --1. C Ta= -- C C Base-to-Emitter Saturation Voltage, VBE(sat) -- V 1. Ta= -- C C C --.1 --1. --1 -- -- Collector Current, IC -- ma IT6 1 Cob -- VCB f=1mhz.1 1. 1 1 Collector Current, IC -- ma Cob -- VCB IT8 f=1mhz -- pf Output Capacitance, Cob Output Capacitance, Cob -- pf.1 --1. --1 Collector-to-Base Voltage, V CB -- V IT ft -- IC VCE= --1V 1. 1. 1 Collector-to-Base Voltage, V CB -- V IT88 ft -- IC V CE =1V Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, ft -- MHz ON Resistance, Ron -- Ω --1. --1 -- -- Collector Current, I C -- ma IT Ron -- IB f=1mhz IN OUT I B 1 1. ON Resistance, Ron -- Ω 1. 1 Collector Current, I C -- ma IT89 Ron -- IB 1 f=1mhz IN OUT I B 1..1 --.1 --1. --1 Base Current, I B -- ma IT64.1.1 1. 1 Base Current, IB -- ma IT69 4
Collector Current, I C -- A 1..1 I CP =A I C =.A A S O 1ms ms DC operation [PNP / NPN] μs μs Ta= C Single pulse Mounted on a ceramic board (6mm.8mm).1 For PNP, minus sign is omitted.1 1. 1 Voltage, V CE -- V IT899 1ms MCH41 Collector Dissipation, P C -- mw 6 4 PC -- Ta Mounted on a ceramic board (6mm.8mm) 4 6 8 1 14 16 Ambient Temperature, Ta -- C IT8991 PACKAGE DIMENSIONS unit : mm SC-88AFL / MCPH CASE 419AP ISSUE O to 1 : Base 1 : Emitter Common : Base 4 : Collector : Collector 1
MCH41 ORDERING INFORMATION MCH41-TL-E Device Marking Package Shipping (Qty / Packing) E1 SC-88AFL / MCPH (Pb-Free) / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD811/D. http:///pub_link/collateral/brd811-d.pdf ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at /site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitabilityof its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 6