CONTACT INFORMATION: SHEET INDEX: DISCLOSURES: DOCUMENT GENERAL NOTES: CLIENT ARDENT RESIDENTIAL 5453 BURNET RD. SUITE 203 AUSTIN, TX 78756 ARCHITECT DAVIES COLLABORATIVE 5453 BURNET RD. SUITE 202 AUSTIN, TX 78756 DESIGNER LAURA BRITT DESIGN 911 W 29TH ST AUSTIN, TX 78705 ID0.1 ID1.1 ID1.2 ID1.3 ID1.4 ID2.1 ID2.2 ID2.3 ID3.1 ID3.2 ID3.3 ID3.4 ID4.1 ID4.2 ID4.3 ID4.4 ID4.5 ID5.1 ID6.1 THE GENERAL CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS AND REPORT ANY DISCREPANCIES TO LAURA BRITT DESIGN DURING LAYOUT BEFORE COMMENCEMENT OF AND PRIOR TO ORDERING OF ANY MATERIALS. GENERAL CONTRACTOR SHALL OBTAIN ALL FIELD MEASUREMENTS NECESSARY TO COORDINATE WITH AND MATCH NEW TO EXISTING CONDITIONS. IN NO CASE SHALL WORKING DRAWINGS BE SCALED FROM PLANS, SECTIONS, OR DETAILS ON THE DRAWINGS. IN ALL CASES WHERE A CONFLICT MAY OCCUR BETWEEN ITEMS COVERED BY SPECIFICATIONS AND NOTES ON DRAWINGS, OR BETWEEN GENERAL NOTES AND SPECIFIC DETAILS, LAURA BRITT DESIGN SHALL BE NOTIFIED AND WILL INTERPRET THE INTENT OF THE DRAWINGS. DETAILS AND NOTES DESIGNATED AS "TYPICAL" APPLY GENERALLY TO THE DRAWINGS IN ALL AREAS WHERE CONDITIONS ARE SIMILAR TO THOSE DESCRIBED IN THE DETAILS AND NOTES. CODES: ALL WORK SHALL CONFORM TO THE APPLICABLE BUILDING CODES AND ORDINANCES. IN CASE OF ANY CONFLICT WHERE THE METHODS OR STANDARDS OR INSTALLATION OF THE MATERIALS SPECIFIED DO NOT EQUAL OR EXCEED THE REQUIREMENTS OF THE LAWS OR ORDINANCES, THE LAWS OR ORDINANCES SHALL GOVERN. NOTIFY THE PROPERTY OWNER AND LAURA BRITT DESIGN OF ALL CONFLICTS PRIOR TO INSTALLATION. IT IS THE CONTRACTOR'S RESPONSIBILITY TO BUILD THE PROJECT IN ACCORDANCE WITH THESE DRAWINGS AND THE DIRECTIVES OF ANY CITY BUILDING OFFICIAL OR INSPECTOR TO MEET ALL CODES OF THE CITY. ALL PLUMBING, ELECTRICAL, AND MECHANICAL INSTALLATIONS SHALL COMPLY WITH THEIR RESPECTIVE GOVERNING CODES. AS NECESSARY, PROVIDE FIRE PROTECTION AND ALL PENETRATIONS OF FIRE RATED ELEMENTS AS REQUIRED BY CODE. GENERAL CONTRACTOR IS TO SUBMIT A LIST OF PROPOSED MATERIAL AND FINISH SUBMITTALS AND SHOP DRAWINGS TO PROPERTY OWNER AND LAURA BRITT DESIGN FOR APPROVAL WITHOUT DELAY OF SCHEDULE. COVER SHEET & GENERAL CONDITIONS LEASING FLOOR FINISH PLAN CLUB FINISH PLAN FITNESS FINISH PLAN CABANA FINISH PLAN LEASING FURNITURE/POWER PLAN CLUB FURNITURE/POWER PLAN FITNESS FURNITURE/POWER PLAN LEASING REFLECTED PLAN CLUB REFLECTED PLAN FITNESS REFLECTED PLAN CABANA REFLECTED PLAN ELEVATIONS ELEVATIONS ELEVATIONS ELEVATIONS ELEVATIONS SECTIONS MODEL UNIT - PLAN, RCP, & ELEVATIONS DRAWINGS REPRESENT DESIGN INTENT ONLY THESE DRAWINGS ARE THE DESIGNER'S RENDERING OF THE DESIGNS DISCUSSED WITH THE OWNER(S) OF THE PROPERTY LOCATED AT IT IS THE CONTRACTOR'S SOLE RESPONSIBILITY TO COMPLY WITH ALL PERMITTING LAWS AND REQUIREMENTS AND TO ENFORCE ALL APPLICABLE CODE REQUIREMENTS. LAURA BRITT DESIGN IS IN NO WAY RESPONSIBLE FOR ENGINEERING, INCLUDING BUT NOT LIMITED TO STRUCTURAL ENGINEERING, OF THE DESIGNS CONTAINED HEREIN. THE APPROPRIATE ENGINEERS OR OTHER PROFESSIONALS, INCLUDING BUT NOT LIMITED TO STRUCTURAL ENGINEERS, SHOULD BE CONSULTED PRIOR TO. ALL PAINT AND OTHER APPLIED FINISH ITEMS (INCLUDING ADHESIVES) SHALL BE APPLIED IN ACCORDANCE WITH THE MANUFACTURER'S RECOMMENDATIONS. WATER-BASED OR LOW VOC FINISHES, TYPICAL. PREPARE FLOOR PER FLOORING MANUFACTURER'S RECOMMENDATIONS TO PROVIDE LEVEL AREA FOR FLOORING INSTALLATION AND LEVEL FLOORING TRANSITIONS. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR THE VERIFICATION AND COORDINATION OF THE WORK OF ALL TRADES TO ASSURE COMPLIANCE WITH THE DRAWINGS. CONSTRUCT WALLS PLUMB AND SQUARE UNLESS OTHERWISE NOTED. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR ANY MINOR DEMOLITION NECESSARY TO ACCOMMODATE NEW NOT SPECIFICALLY INDICATED IN THE SCOPE OF WORK. GENERAL CONTRACTOR SHALL PROVIDE A SUITABLE DUST BARRIER AT EACH ENTRY INTO PROJECT AREA. AS APPLICABLE, GENERAL CONTRACTOR SHALL RECYCLE ANY SALVAGEABLE CABINETRY, PLUMBING, LIGHT FIXTURES, DOORS, ETC BY DONATING SUCH ITEMS TO" THE HABITAT RE-STORE", OR SIMILAR. GENERAL CONTRACTOR SHALL PROTECT ANY ITEMS REQUESTED BY PROPERTY OWNER TO BE SALVAGED FOR RE-USE AT THE PROJECT PROPERTY ADDRESS. FLOORING TRANSITION STRIPS BETWEEN DISSIMILAR FLOOR FINISH MATERIALS NOT TO EXCEED MAX. 1 4"V. IF TRANSITION STRIP EXCEEDS 1 4"V, MUST NOT EXCEED MAX. 1/2V WITH TOP 1 4" HAVING 1:2 OR SHALLOWER BEVEL. IF EXCEEDING MAX. 1 2"V MUST THEN HAVE 1:12 OR SHALLOWER SLOPE. 1 2" 'QUARTER ROUND' STYLE TRANSITION STRIP IS NOT CONSIDERED ACCESSIBLE AS 1:2 OR SHALLOWER SLOPE IS NOT PROVIDED. ID0.1
1. ALL FINISH FLOOR MATERIALS TO BE LEVEL AFTER INSTALLATION 2. RE: INTERIOR DESIGN SPECIFICATIONS FOR DETAILS ON FINISHES, DOORS, AND FLOOR TRANSITION. 3. RE: ELEVATIONS AND DETAILS FOR FURTHER FINISH INFORMATION. 4. SCHEDULED FLOOR FINISH TO RUN CONTINUOUSLY UNDER MILLWORK, APPLIANCES, AND KNEE SPACES, U.N.O. 5. ALIGN FLOORING TRANSITIONS AT DOORS WITH CENTERLINE OF DOOR IN CLOSED POSITION, U.N.O. MAINTENANCE Mech Work/Break Parcel 106 105 Carpet (CPT-2) LVT-1 COPY Closet 106 LVT-1 KEY TRAK LVT-1 Office 102 Carpet (CPT-1) REF DW Conference 103 Carpet (CPT-1) Office 101 Carpet (CPT-1) Leasing Center 100 Wood (WD-1) 108 LVT-1 Restroom 104 Tile (T-3) U/C BEV LEASING OFFICE - FLOOR FINISH PLAN ID1.1
1. RE: GENERAL NOTES ON SHEET ID1.1. MATCH LINE Club 110 Wood (WD-1) TRASH DRWR TRASH DRWR U/C MICRO. WARM DWRS. DW ICE U/C FRIDGE Restroom 112 Tile (T-4) Conference 111 Wood (WD-1) I.T. 113 LVT-1 HVAC 114 LVT-1 CLUB HOUSE - FLOOR FINISH PLAN ID1.2
1. RE: GENERAL NOTES ON SHEET ID1.1. MATCH LINE Yoga 121 LVT-2 Fitness 120 Carpet (CPT-3) Closet 122 LVT-1 HVAC 124 LVT-1 FITNESS - FLOOR FINISH PLAN ID1.3
GRILL AND COUNTERTOP ON CLOSED BASE GRILL 1 101 WOMEN RESTROOM 102 Tile (T-8) TRASH SINK KEG MEN RESTROOM 105 Tile (T-8) GRILL 2 106 GRILL AND COUNTERTOP ON CLOSED BASE RE: LANDSCAPE DRAWINGS FOR EXTERIOR FLOOR FINISH SPECIFICATION CABANA - FLOOR FINISH PLAN ID1.4
1. RE: MEP DRAWINGS FOR FURTHER DETAILS AND COORDINATION. 2. IF ANY OUTLET SHOWN CANNOT BE INSTALLED AS NOTED OR SHOWN ON THIS PLAN DUE TO CONFLICTS WITH STRUCTURE, MECHANICAL, OR ELECTRICAL ITEMS, OBTAIN CLARIFICATION BEFORE PROCEEDING WITH OUTLETS IN QUESTION OR RELATED OUTLETS IN THE AREA. 3. ALL FLOOR OUTLETS TO BE FLUSH FIRE-RATED STYLE, U.N.O. 4. ALL POWER RECEPTACLES/COVER PLATES TO BE WHITE, EXCEPT AT WOOD FINISH WALLS, DARK ACCENT WALLS OR DARK LAMINATE BACKSPLASH LOCATIONS, POWER/DATA OUTLETS TO BE BROWN. 5. COORDINATE ALL ELECTRIC AND CABLE REQUIREMENTS FOR TV LOCATIONS WITH MEP ENGINEER. 6. CENTER ALL ELECTRICAL AND CABLE OUTLETS BEHIND WALL MOUNTED TELEVISIONS. 7. FURNITURE SHOWN FOR REF. PURPOSES ONLY. 8. RE: MEP DRAWINGS FOR ALL POWER/DATA PLACEMENT DIMENSIONS. MAINTENANCE Mech Work/Break 105 Parcel 106 COPY Closet 106 KEY TRAK +42 Office 102 REF DW +60 Conference 103 Office 101 Leasing Center 100 108 Restroom 104 U/C+42 BEV LEASING OFFICE - FURNITURE AND POWER PLAN ID2.1
1. RE: GENERAL NOTES ON SHEET ID2.1. MATCH LINE Club 110 CASEGOOD TRASH DRWR TRASH DRWR U/C MICRO. WARM DWRS. DW ICE U/C FRIDGE Restroom 112 Conference 111 I.T. 113 HVAC 114 CASEGOOD SHUFFLE BOARD CLUB HOUSE - FURNITURE AND POWER PLAN ID2.2
1. RE: GENERAL NOTES ON SHEET ID2.1. MATCH LINE FITNESS EQUIPMENT LAYOUT AND POWER REQUIREMENTS PROVIDED BY FITNESS CONSULTANT Yoga 121 Fitness 120 Closet 122 HVAC 124 FITNESS - FURNITURE AND POWER PLAN ID2.3
1. RE: MEP DRAWINGS FOR ARCHITECTURAL AND GENERAL LIGHTING 2. ALL GYPBOARD TO BE PAINTED WITH FLAT FINISH U.N.O. 3. RE: INTERIOR DESIGN SPECIFICATIONS FOR DECORATIVE LIGHTING AND PAINT DETAILS. 4. RE: ELEVATIONS FOR MOUNTING HEIGHTS 5. COORDINATE ALL ACCESS PANELS WITH MEP. THE ADDITION OF ANY ACCESS PANEL NOT NOTED ON THIS PAGE SHALL REQUIRE NOTIFICATION TO INTERIOR DESIGNER & ARCHITECT. 6. ALL LIGHTING FIXTURE LOCATION DIMENSIONS ARE TO THE CENTER OF THE FIXTURE 7. ALL LIGHTING FIXTURE LOCATIONS TO BE COORDINATED WITH MEP DOCUMENTS. DISCREPANCIES SHALL BE BROUGHT TO THE INTERIOR DESIGNER'S ATTENTION. 5'-8" EQ 4'-6" 4'-8" 4'-11" 6'-5 1/2" Mech 108 5'-3 1/2" L16 EQ Work/Break 4'-8" Parcel 106 105 L8 L8 L16 2'-8 1/2" EQ 3'-6 1/2" Restroom 104 EQ 6'-8" 2'-4 1/2" 4'-5 1/2" L5 4'-9" L19 L4 L17 L3 +8'-2" L1 L4 L17 L18 L18 L18 L18 10'-4" Closet 106 3'-3" 6'-6" 4'-8" 4'-8" 5'-3 1/2" 2'-0 1/2" 2'-6" 5'-11 1/2" 6'-11" L19 Office 5'-11 1/2" 9'-11" 102 4'-3" 7'-0 1/2" 2'-5 1/2" 6'-9 1/2" 2'-6" 8 1/2" 4'-7 1/2" 7" 7" 4'-7 1/2" 8 1/2" 6'-1" 5'-0 1/2" 1'-2 1/2" 5'-0" Office 101 9'-11" 5'-11 1/2" 5'-11 1/2" 2'-5 1/2" Conference 103 7'-0 1/2" 2'-0 1/2" 6'-11" 2'-5" 2'-2 1/2" 2'-3 1/2" 5'-5" L14 L14 L14 L6 L6 L6 L6 L6 L6 7'-2" 7'-2" 5'-6" 7'-2" 7'-2" 5'-5" 4'-0" 4'-0" 10'-0" HVAC DUCT, RE: MEP L6 L6 L6 L6 HVAC DUCT, RE: MEP 4'-0 1/2" 4'-0 1/2" 4'-6" L6 Leasing Center 100 L6 BEAM ABOVE (TYP.) 1'-11" 3'-8 1/2" T&G WOOD HEIGHT AFF VARIES (RE: ARCHITECTURAL DRAWINGS) 2'-6" L2.2 L2.1 3'-4" 1'-10 1/2" 5'-7 1/2" L2 3'-2" BEAM ABOVE (TYP.) L2.1 L2.2 5'-8 1/2" 13'-11" LEASING OFFICE - REFLECTED PLAN ID3.1
1. RE: GENERAL NOTES ON SHEET ID3.1. 4'-0" L14 L14 L14 7'-4" L20 6'-1" MATCH LINE 4'-1" 4'-1" 5'-9" 7'-4" 6'-8" 6'-1" BEAM ABOVE (TYP.) T&G WOOD HEIGHT AFF VARIES (RE: ARCHITECTURAL DRAWINGS) 7'-4" 7'-4" L20 6'-1" BEAM ABOVE (TYP.) HVAC DUCT, RE: MEP 7'-4" 7'-4" 7'-4" L20 L9 L9 Restroom 112 3'-6 1/2" 1'-9 1/2" Conference 111 5'-0" I.T. 113 HVAC 3'-11" L16 114 5'-3 1/2" 3'-11" 4'-0" 7'-4" 6'-1" 6'-1" Club 110 5'-9" 7'-4" 6'-8" 6'-1" 7'-4" HVAC DUCT, RE: MEP 1'-10" 3'-7 1/2" L14 5'-8" L7 L14 5'-8" 2'-2" L7 5'-8" 4'-10 1/2" 5'-8" 3'-7 1/2" 3'-7 1/2" CLUB HOUSE - REFLECTED PLAN ID3.2
1. RE: GENERAL NOTES ON SHEET ID3.1. MATCH LINE MATCH LINE F1 L20 F1 T&G WOOD HEIGHT AFF VARIES 2'-8" BEAM ABOVE (TYP.) HVAC DUCT, RE: MEP TYP. 7'-3" 6'-10 1/2" Fitness 120 TYP. TYP. F1 L20 F1 TYP. 1'-8" BEAM ABOVE (TYP.) 10'-0" TYP. F1 L20 F1 6'-11 1/2" 6'-10" 6'-11 1/2" 3'-9 1/2" TYP. TYP. TYP. TYP. 1'-8" 5'-2" 5'-2" 5'-2" 3'-8 1/2" Yoga 121 5'-2" F1 5'-2" 5'-2" Closet 122 1'-10 1/2" 2'-6" 3'-11" 5'-9 1/2" 5'-9 1/2" 7'-3" TYP. HVAC DUCT, RE: MEP HVAC L16 124 FITNESS - REFLECTED PLAN ID3.3
1. RE: GENERAL NOTES ON SHEET ID3.1. 2. RE: MEP/ARCH FOR GENERAL OUTDOOR LIGHTING. GRILL 1 101 F2 F2 2'-9 1/2" 5'-7 1/2" WOMEN RESTROOM L13 102 5'-7 1/2" 2'-8" 5'-4" 2'-8" 5'-4" 5'-7 1/2" MEN RESTROOM 5'-7 1/2" 105 L13 L13 L13 L11 L11 L11 3'-1" 3'-1" 2'-9 1/2" F2 GRILL 2 106 F2 F2 F2 CABANA - REFLECTED PLAN ID3.4
L-2.2 L-2.1 L-2 L-2.1 L-2.2 9'-1" 9'-1" 16'-0" 18'-6" U/C FRIDGE 2'-6 1/2" 5'-2" 4'-7" 6'-7" MIN 1'-0" MIN 10'-1" 42" GRAB BAR 10'-1" 5'-6" 3'-4" MIRROR FIXED PANEL PANEL *SEE SECTION* 5'-5 1/4" 5'-6" 17"-19" 36" MIN GRAB BAR 1 1 2" MIN. 17"-19" 18" MIN. 7'-1" ID4.1
EQ EQ 16'-5 1/2" 7'-2" 9'-3 1/2" 5'-9" 3'-4" 3'-5" RECESSED TV 38" X 66" 3'-5" 6'-6" 9'-0" 2'-2" 2'-11" 2'-0 1/2" 3'-0" 4'-0" DW 1 SHELF FIXED PANEL PANEL *SEE SECTION* TRASH DRAWER 2'-6" 4'-0" 3'-10" 1'-2" 3'-10" 0" 5'-10 1/2" 7'-10 1/2" KEY TRAK COPY/PRINT 7'-7" FILE DRAWERS (FURNITURE) 3'-6 3/4" 5'-6 3/4" 2'-6" 4'-8" 3'-2" 12'-10 3/4" 7'-0" 1'-4" 1'-4" 2'-6" 3'-0" 3'-0" 6'-0" 6'-0" 3'-8" 7'-2" ID4.2
RECESSED TV 38" X 66" 15'-6" 10'-0" FIREPLACE BY ARCHITECT 8'-0" Steel Mantel 20'-0" OPEN TO HALL BEYOND BACK SIDE OF KITCHEN ISLAND 3'-6 1/4" 2'-7 1/2" 3'-6 1/4" 9'-7 3/4" 2'-6" U/C MICRO. WARM DWRS. 5'-1" 10'-7" 6 3/4" 6 3/4" MIN 1'-0" MIN DW FIXED PANEL PANEL *SEE SECTION* 2'-0 3/4" 3'-0" 3'-7 1/4" 10'-7 3/4" OPEN TO CLUBHOUSE BEYOND 1'-3" 2'-3" 7'-7" 1 1 2" MIN. 17"-19" 18" MIN. 7'-1" 10'-1 1/4" 5'-6" 3'-4" 8 1/2" 2'-1 1/2" MIRROR FIXED PANEL PANEL *SEE SECTION* 5'-4 1/4" 5'-6" 17"-19" 10'-1 1/4" ID4.3
EQ EQ 9'-0" 4'-1" 3'-5" TELEVISION 66" X 38" 5'-9" WALL MIRRORS 3'-5" 7'-8" 16'-1 3/4" 36" MAX 3'-3" ELKAY ADA BOTTLE FILLING STATION -BOTTLE FILLING CONTROLS NOT TO EXCEED MAX 48" AFF -AT LOW FOUNTAIN, PROVIDE MIN. 27" KNEE SPACE FOR FORWARD APPROACH ID4.4
MIN 1'-0" MIN MIRROR 36" MIN GRAB BAR FIXED PANEL 7'-0" 42" GRAB BAR 1 1 2" MIN. 6" PANEL *SEE SECTION* 3'-4" 6" 18" MIN. 17"-19" 7"-9" 17"-19" FLUSH CONTROLS SHALL BE HAND OPERATED OR AUTOMATIC. HAND OPERATED FLUSH CONTROLS SHALL COMPLY WITH 309. FLUSH CONTROLS TO BE LOCATED ON THE OPEN SIDE OF THE WATER CLOSET. 17"-19" 18" MIN. 18" MIN. 17"-19" 7"-9" 1 1 2" MIN. 42" GRAB BAR 36" MIN GRAB BAR FLUSH CONTROLS SHALL BE HAND OPERATED OR AUTOMATIC. HAND OPERATED FLUSH CONTROLS SHALL COMPLY WITH 309. FLUSH CONTROLS TO BE LOCATED ON THE OPEN SIDE OF THE WATER CLOSET. 17"-19" 1'-0" MIN MIN 7'-0" 3'-4" MIRROR FIXED PANEL PANEL *SEE SECTION* 6" 6" 5'-6" FIXED PANEL 3'-0" TRASH PANEL *SEE SECTION* KEG CABANA - ELEVATIONS SCALE: 1/2" = 1'-0" 3'-0" ID4.5
2'-1" ADJUSTABLE SHELVES WITH METAL PEGS 2'-1" Millwork sub-contractor will coordinate with the AV sub-contractor to procure the specified fan and is responsible for cutting the mounting hole per the manufacturers guidelines. ADJUSTABLE SHELVES WITH METAL PEGS 1'-2" 3'-10" 1'-0" 2'-1" ADJUSTABLE SHELVES WITH METAL PEGS ADJUSTABLE SHELVES WITH METAL PEGS 4" 4'-8" 3'-2" 4" 2'-6" 1'-0" 2'-1" ADJUSTABLE SHELVES WITH METAL PEGS ADJUSTABLE SHELVES WITH METAL PEGS 4" 4" 2'-1" 4" ADJUSTABLE SHELVES WITH METAL PEGS PT-4 8" MIN 9" MIN 2'-5" MIN SCALD GUARD CABINETRY SECTIONS SCALE: 1/2" = 1'-0" ID5.1
6'-0" 3'-0" UNIT ENTRY DOOR 4'-0" 5'-2" 1. REFERENCE FOR MATERIAL LOCATIONS AND PATTERNING ONLY. 2. SEE A123 FOR SPECIFIC DIMENSIONS. 3. ALL FINISH FLOOR MATERIALS TO BE LEVEL AFTER INSTALLATION 4. RE: INTERIOR DESIGN SPECIFICATIONS FOR DETAILS ON FINISHES, DOORS, AND FLOOR TRANSITION. 5. SCHEDULED FLOOR FINISH TO RUN CONTINUOUSLY UNDER MILLWORK, APPLIANCES, AND KNEE SPACES, U.N.O. 6. ALIGN FLOORING TRANSITIONS AT DOORS WITH CENTERLINE OF DOOR IN CLOSED POSITION, U.N.O. CORRIDORS AND UNIT ENTRY SCALE: 1/2" = 1'-0" MV RANGE REF UNIT A123 KITCHEN- SURFACE MATERIAL LOCATIONS AND PATTERNING SCALE: 1/2" = 1'-0" DW FIXED 3'-0" 9'-0" 3'-0" BATHROOM BEDROOM LIVING LAUNDRY KITCHEN 4" 7'-0" 2'-4" 1'-4" CLOSET 3'-0 1/2" 3'-0 1/2" UNIT A123 BATHROOM- SURFACE MATERIAL LOCATIONS AND PATTERNING SCALE: 1/2" = 1'-0" UNIT A123- FLOOR FINISH PLAN SCALE: 1/2" = 1'-0" ID6.1