www.osram-os.com Produktdatenblatt Version 1.1 OSLON Compact PL Compact light source with isolated thermal pad for improved heat dissipation and small z-tolerance (+/- 35 µm). Applications Headlamps, LED & Laser & Night Vision Features: Package: Ceramic package Chip technology: UX:3 Typ. Radiation: 120 (Lambertian emitter) Color: Cx = 0.32, Cy = 0.33 acc. to CIE 1931 ( white) Corrosion Robustness Class: 3B Qualifications: The product qualification test plan is based on the guidelines of IEC60810, Lamps for road vehicles Performance requirements Requirements and test conditions for LED packages. ESD: 8 kv acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) 1 Version 1.4 2018-07-10
Ordering Information Type Luminous Flux 1) Ordering Code = 1000 ma Φ V -Z7P6-ebvFfcbB46-PAB6 560... 849 lm Q65112A1566 2 Version 1.4 2018-07-10
Maximum Ratings Parameter Symbol Values Operating Temperature T op min. max. Storage Temperature T stg min. max. -40 C 125 C -40 C 125 C Junction Temperature T j max. 150 C Junction Temperature for short time applications * T j max. 175 C Forward Current T S = 25 C Surge Current t 10 µs; D = 0.005 ; T S = 25 C ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) min. max. 50 ma 1500 ma S max. 4000 ma Reverse current 2) I R max. 200 ma V ESD 8 kv *The median lifetime (L70/B50) for Tj =175 C is 100h. 3 Version 1.4 2018-07-10
Characteristics = 1000 ma; T S = 25 C Parameter Symbol Values Chromaticity Coordinate 3) Viewing angle at 50 % I V 2φ typ. 120 Forward Voltage 4) = 1000 ma Cx Cy V F typ. typ. min. typ. max. 0.32 0.33 5.45 V 6.05 V 6.75 V Reverse voltage (ESD device) V R ESD min. 45 V Reverse voltage 2) I R = 20 ma V R max. 1.2 V Real thermal resistance junction/solderpoint 5) R thjs real typ. max. Electrical thermal resistance junction/solderpoint 5) with efficiency η e = 25 % R thjs elec. typ. max. 3.3 K / W 3.9 K / W 2.4 K / W 2.9 K / W 4 Version 1.4 2018-07-10
Brightness Groups Group Luminous Flux 1) Luminous Flux 1) = 1000 ma = 1000 ma min. max. Φ V Φ V 7P 560 lm 630 lm 7PF 594 lm 669 lm 8P 630 lm 710 lm 8PF 669 lm 754 lm 5Q 710 lm 800 lm 5QF 754 lm 849 lm Forward Voltage Groups Group Forward Voltage 4) Forward Voltage 4) = 1000 ma = 1000 ma min. max. V F V F PA 5.45 V 5.95 V 1A 5.95 V 6.45 V B6 6.45 V 6.75 V 5 Version 1.4 2018-07-10
Chromaticity Coordinate Groups 3) 0,90 0,37 520 Cy 515 0,80 510 525 530 540 Cy 0,36 0,70 550 505 0,60 560 0,35 fcbb46 500 0,50 570 580 0,34 ebzb46 495 0,40 590 600 610 0,33 ebxd46 0,30 490 620 630 650 700 0,32 ebvf46 0,20 485 480 0,10 475 470 465 460 455 450 0,00 400 0,00 0,10 0,20 0,30 0,40 0,50 0,60 0,70 Cx 0,31 0,30 0,29 0,30 0,31 0,32 0,33 0,34 Cx Color Chromaticity Groups 3) Group Cx Cy ebvf46 0.3127 0.3093 0.3212 0.3175 0.3199 0.3325 0.3104 0.3234 ebxd46 0.3163 0.3181 0.3253 0.3266 0.3246 0.3424 0.3145 0.3330 Group Cx Cy ebzb46 0.3203 0.3274 0.3299 0.3361 0.3298 0.3526 0.3190 0.3430 fcbb46 0.3248 0.3370 0.3350 0.3460 0.3355 0.3633 0.3241 0.3534 6 Version 1.4 2018-07-10
Group Name on Label Example: 5Q-ebvF46-1A Brightness Color chromaticity Forward Voltage 5Q ebvf46 1A 7 Version 1.4 2018-07-10
Relative Spectral Emission 6) Φ rel = f (λ); = 1000 ma; T S = 25 C 1,0 Φ rel :V λ : 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 Note: Percentage of red: >5% acc. to ECE regulation λ [nm] Percentage of UV: <10-5 W/lm acc. to ECE regulation Radiation Characteristics 6) I rel = f (ϕ); T S = 25 C -40-30 -20 ϕ [ ] -10 0 10 20 30 40 50 60 70 80 90 1,0 Irel 0,8-60 -50 0,6-70 0,4-80 0,2-90 0,0-100 8 Version 1.4 2018-07-10
Forward current = f(v F ); T S = 25 C 6), 7) Relative Luminous Flux Φ v /Φ v (1000 ma) = f( ); T S = 25 C 6), 7) 3000 [ma] Φ V Φ V (1000mA) 2,5 2500 2,0 2000 1,5 1500 1,0 1000 0,5 500 50 5,2 5,4 5,6 5,8 6,0 6,2 6,4 6,6 6,9 V F [V] 0,0 50 500 1000 1500 2000 2500 [ma] 3000 Chromaticity Coordinate Shift 6) Cx, Cy = f( ); T S = 25 C Cx Cy 0,03 0,02 : Cx : Cy 0,01 0,00-0,01-0,02-0,03 50 500 1000 1500 2000 2500 [ma] 3000 9 Version 1.4 2018-07-10
Forward Voltage 6) V F = V F - V F (25 C) = f(t j ); = 1000 ma Relative Luminous Flux 6) Φ v /Φ v (25 C) = f(t j ); = 1000 ma V F [V] 0,4 Φ v Φ v (25 C) 1,2 1,0 0,2 0,8 0,0 0,6 0,4-0,2 0,2-0,4-40 -20 0 20 40 60 80 100 120 140 T j [ C] 0,0-40 -20 0 20 40 60 80 100 120 140 T j [ C] Chromaticity Coordinate Shift 6) Cx, Cy = f(t j ); = 1000 ma Cx Cy 0,03 0,02 : Cx : Cy 0,01 0,00-0,01-0,02-0,03-40 -20 0 20 40 60 80 100 120 140 T j [ C] 10 Version 1.4 2018-07-10
Max. Permissible Forward Current = f(t) [ma] 1600 1500 1400 1300 1200 1100 1000 900 800 :T s 700 600 500 400 300 200 100 0 0 20 40 60 80 100 120 T [ C] Permissible Pulse Handling Capability = f(t p ); D: Duty cycle [A] 3,5 3,0 2,5 2,0 1,5 T S =0 C... 114 C :D=1.0 :D=0.5 :D=0.2 :D=0.1 :D=0.05 :D=0.02 :D=0.01 :D=0.005 10-6 10-5 10-4 10-3 0,01 0,1 1 10 Pulse time [s] Permissible Pulse Handling Capability = f(t p ); D: Duty cycle Permissible Frequency Handling =f(d) f: Frequency T S = 125 C T S =0 C... 114 C [A] 3,5 3,0 [A] 3 :f=60hz :f=120hz :f=240hz :f=400hz :f=800hz :f=1000hz 2,5 2,0 :D=1.0 :D=0.5 :D=0.2 :D=0.1 :D=0.05 :D=0.02 :D=0.01 :D=0.005 2 1 1,5 1,0 10-6 10-5 10-4 10-3 0,01 0,1 1 10 Pulse time [s] 0 0 10 20 30 40 50 60 70 80 90 100 Duty Cycle [%] 11 Version 1.4 2018-07-10
Permissible Frequency Handling =f(d) f: Frequency [A] 3 T S = 125 C "" " :f=60hz :f=120hz :f=240hz :f=400hz :f=800hz :f=1000hz 2 1 0 0 10 20 30 40 50 60 70 80 90 100 Duty Cycle [%] 12 Version 1.4 2018-07-10
Dimensional Drawing 8) Approximate Weight: 19.4 mg Corrosion test: ESD advice: Class: 3B Test condition: 40 C / 90 % RH / 15 ppm H 2 S / 14 days (stricter then IEC 60068-2-43) LED is protected by ESD device which is connected in parallel to LED-Chip. 13 Version 1.4 2018-07-10
Electrical internal circuit Recommended Solder Pad 8) For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. 14 Version 1.4 2018-07-10
Reflow Soldering Profile Product complies to MSL Level 2 acc. to JEDEC J-STD-020E 300 C T 250 240 C 217 C 200 t P t L T p OHA04525 245 C 150 t S 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Symbol Pb-Free (SnAgCu) Assembly Unit Minimum Recommendation Maximum Ramp-up rate to preheat *) 25 C to 150 C 2 3 K/s Time t S t S 60 100 120 s T Smin to T Smax Ramp-up rate to peak *) 2 3 K/s T Smax to T P Liquidus temperature T L 217 C Time above liquidus temperature t L 80 100 s Peak temperature T P 245 260 C Time within 5 C of the specified peak temperature T P - 5 K Ramp-down rate* T P to 100 C t P 10 20 30 s 3 6 K/s Time 480 s 25 C to T P All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 15 Version 1.4 2018-07-10
Taping 8) 16 Version 1.4 2018-07-10
Tape and Reel 9) Reel dimensions [mm] A W N min W 1 W 2 max Pieces per PU 180 mm 12 + 0.3 / - 0.1 60 12.4 + 2 18.4 4000 17 Version 1.4 2018-07-10
_< C). _< If wet, 5% parts still adequately dry. change desiccant If wet, 10% examine units, if necessary bake units If wet, 15% examine units, if necessary bake units WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Barcode-Product-Label (BPL) Dry Packing Process and Materials 8) CAUTION LEVEL If blank, see bar code label This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 10% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot Desiccant Humidity Indicator MIL-I-8835 OSRAM OHA00539 Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033. 18 Version 1.4 2018-07-10
_< C). _< 11 0 0144 ML 2 220 C R 2a (9D) D/C: 11 0 0144 Bin2: Q-1-20 Bin3: ML Temp ST 2 220 C R 2a Transportation Packing and Materials 8) Barcode label Barcode label CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 10% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours LEVEL If blank, see bar code label OSRAM Opto Semiconductors 210021998 LSY T676 Multi TOPLED Bin1: P-1-20 Bin2: Q-1-20 Bin3: Temp ST 240 C R 3 260 C RT Additional TEXT R077 PACKVAR: (G) GROUP: DEMY R18 P-1+Q-1 OHA02044 Muster (6P) BATCH NO: (1T) LOT NO: (9D) D/C: (X) PROD NO: 1 123GH1234 0 425 (Q)QTY: 2000 OSRAM Opto Semiconductors 210021998 (6P) BATCH NO: (1T) LOT NO: (X) PROD NO: 1 123GH1234 Muster 0 425 (Q)QTY: 2000 LSY T676 Multi TOPLED Bin1: P-1-20 240 C R 3 260 C RT Additional TEXT R077 PACKVAR: (G) GROUP: DEMY R18 P-1+Q-1 OSRAM Packing Sealing label Dimensions of transportation box in mm Width Length Height 195 ± 5 mm 195 ± 5 mm 30 ± 5 mm 19 Version 1.4 2018-07-10
Type Designation System Emission color: W: white W2: 2 chips white W3: 3 chips white W4: 4 chips white Y: yellow UW: ultra white CY: color on demand yellow Technology Concept M: Silicone encapsulation (molding) Platform: Ceramic K: Automotive and Industry Product L: Light emitting diode Package Type C: Toplooker Ceramic package w/o reflector (CERAMOS, OSLON (ceramic), OSLON Compact Product version K W C E L N M 1. T G Lead / Package Properties TOPlooker: Sidelooker: E: 1608 E: 5515 F: 2828 H: 3006 PCB: Leadframe: H: 3432 F: 2828 Ceramic packages: E: 1915 F: 2531 G: 3631 H: 4731 E: OSLON Compact AlN based for Automotive (Project Mini PowerLED) Encapsulant Type / Lens Properties L: No lens (Lambertian) U: OSLON Compact with CLC layer ceramic Converted Colors T: greenish cold white F: Full conversion (color depending on color description) C: intermediate cold white H: YE4 Binning Information: Converted colors G: ECE binning:iec 62707 (ebxd46 System) Y: Conversion, Yellow 5F5G Chip Technology: N: Standard power class High performance (>= 500µm) P: power performance (>= 500µm) 20 Version 1.4 2018-07-10
Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Subcomponents of this LED contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize LED exposure to aggressive substances during storage, production, and use. LEDs that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. For further application related informations please visit www.osram-os.com/appnotes 21 Version 1.4 2018-07-10
Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS webside. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer or Customer supplied by Buyer considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 22 Version 1.4 2018-07-10
Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ±8 % and an expanded uncertainty of ±11 % (acc. to GUM with a coverage factor of k = 3). 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typically 25 ms, with an internal reproducibility of ±0.005 and an expanded uncertainty of ±0.01 (acc. to GUM with a coverage factor of k = 3). 4) Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of ±0.05 V and an expanded uncertainty of ±0.1 V (acc. to GUM with a coverage factor of k = 3). 5) Thermal Resistance: Rth max is based on statistic values (6σ). 6) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single LEDs within one packing unit. 8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. 9) Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm. 23 Version 1.4 2018-07-10
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com All Rights Reserved. 24 Version 1.4 2018-07-10