Value Parameter Symbol Conditions

Similar documents
NGTB20N60L2TF1G. N-Channel IGBT 600V, 20A, VCE(sat);1.45V TO-3PF-3L with Low VF Switching Diode

NGTB30N60L2WG. N-Channel IGBT With Low VF Switching Diode 600V, 30A, VCE(sat);1.4V

NGTB03N60R2DT4G IGBT 600V, 4.5A, N-Channel

TIG067SS. N-Channel IGBT 400V, 150A, VCE(sat);3.8V Single SOIC8. Features. Specifications. TIG 067 LOT No.

Tc=25 C 3.5 W When mounted on ceramic substrate (600mm 2 0.8mm) 1.3 W Junction Temperature Tj 150 C Storage Temperature Tstg - 55 to +150 C

Value Parameter Symbol Conditions

High Speed Switching ESD Diode-Protected Gate C/W

Planar Ultrafast Rectifier Fast trr type, 20A, 600V, 50ns, TO-220F-2FS

This product is designed to ESD immunity < 200V*, so please take care when handling. * Machine Model

2SC5994 Bipolar Transistor 50V, 2A, Low VCE(sat), NPN Single

SBT700-06RH. Schottky Barrier Diode 60V, 70A, VF; 0.66V Dual To-3PF-3L Cathode Common

High-speed switching applications (switching regulator, driver circuit) Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 60 V

125 C/W. Value Parameter Symbol Conditions

CPH6532. Bipolar Transistor 50V, 1A, Low VCE(sat) NPN Dual CPH6. Applications. Features. Specifications

Large current capacitance (IC=10A) Low collector-to-emitter saturation voltage (VCE(sat)=180mV(typ.)) High-speed switching (tf=25ns(typ.

2SK4124. N-Channel Power MOSFET 500V, 20A, 430mΩ, TO-3P-3L. Features. Specifications

CPH3455. Power MOSFET 35V, 104mΩ, 3A, Single N-Channel

ELECTRICAL CONNECTION

CPH3360. Power MOSFET 30V, 303mΩ, 1.6A, Single P-Channel

6HP04MH. P-Channel Small Single MOSFET 60V, 370mA, 4.2Ω Single MCPH3. Features. Specifications Absolute Maximum Ratings at Ta=25 C

MCH3382. Power MOSFET 12V, 198mΩ, 2A, Single P-Channel

MCH3383. Power MOSFET 12V, 69mΩ, 3.5A, Single P-Channel

2SC5374A. RF Transistor 10V, 100mA, ft=5.2ghz, NPN Single SMCP. Features. Specifications

Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 600 V Gate-to-Source Voltage VGSS ±30 V

Collector Dissipation Tc=25 C 30 W Junction Temperature Tj 150 C Storage Temperature Tstg --55 to +150 C

MCH6331. Power MOSFET 30V, 98mΩ, 3.5A, Single P-Channel

MCH5541 PNP/NPN Bipolar Transistor ( )30V, ( )700mA, VCE(sat) ; ( 220)190mV (max)

2SA608N/2SC536N. Bipolar Transistor. ( )50V, ( )150mA, Low VCE(sat) (PNP)NPN Single NPA-WA. Applicaitons. Features. Specifications ( ) : 2SA608N

2SK4087LS-1E

ECH8659. Power MOSFET 30V, 24mΩ, 7A, Dual N-Channel

(-)50V, (-)7A, Low VCE(sat), (PNP)NPN Single PCP

CPH6443. Power MOSFET 35V, 37mΩ, 6A, Single N-Channel

(-)50V, (-)10A, Low VCE(sat), (PNP)NPN Single TP/TP-FA. Large current capacity High-speed switching

3LP01S. P-Channel Small Signal MOSFET 30V, 0.1A, 10.4Ω, Single SMCP. Features. Specifications. Low ON-resistance Ultrahigh-speed switching 2.

EMH1307. P-Channel Power MOSFET 20V, 6.5A, 26mΩ, Single EMH8. Features. Specifications. Input Capacitance Ciss=1100pF(typ.) Halogen free compliance

1HP04CH. Small Signal MOSFET 100V, 18Ω, 170mA, Single P-Channel

MCH6664. P-Channel Power MOSFET 30V, 1.5A, 325mΩ, Dual MCPH6. Features

Low-frequency Amplifer, high-speed switching small motor drive, muting circuit

2SD1620. Bipolar Transistor 10V, 3A, Low VCE(sat), NPN Single PCP

MCH6541. Bipolar Transistor. ( )30V, ( )3A, Low VCE(sat) Complementary Dual MCPH6

SCH1436. Power MOSFET 30V, 180mΩ, 1.8A, Single N-Channel

15C01M. Bipolar Transistor 15V, 0.7A, Low VCE(sat) NPN Single MCP. Applications. Features. Specifications. Low-frequency Amplifier, muting circuit

Relay drivers, high-speed inverters, converters, and other general high-current switching applications

Fast reverse recovery time (trr max=10ns) Low switching noise Low leakage current and high reliability due to highly reliable planar structure

MCH3484. Power MOSFET 20V, 40mΩ, 4.5A, Single N-Channel. Electrical Connection N-Channel

2SD1835. Bipolar Transistor 50V, 2A, Low VCE(sat), NPN Single NP. Applications

CPH3910. N-Channel JFET 25V, 20 to 40mA, 40mS, CPH3. Applications. Features. Specifications. For AM tuner RF amplification Low noise amplifier

2SK4177. N-Channel Power MOSFET 1500V, 2A, 13Ω, TO-263-2L. Features. Specifications. ON-resistance RDS(on)=10Ω(typ.) 10V drive

High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) High allowable power dissipation

SMP3003. P-Channel Power MOSFET 75V, 100A, 8.0mΩ, TO-263-2L/TO-263. Features. Specifications TO-263

SBE805. Schottky Barrier Diode 30V, 0.5A, Low IR. Features. Specifications

2SC5245A. RF Transistor 10V, 30mA, ft=8ghz, NPN Single MCP. Features. Specifications. : NF=1.4dB typ (f=1.5ghz) High gain

Low-Frequency general-purpose amplifier, impedance conversion, infrared sensor applications

55GN01FA. RF Transistor 10V, 70mA, ft=5.5ghz, NPN Single SSFP. Features. Specifications

Strobe DC-DC converters, relay drivers, hammer drivers, lamp drivers, motor drovers

Protection diode in Halogen free compliance

NSVJ3910SB3 N-Channel JFET 25V, 20 to 40mA, 40mS

Relay drivers, high-speed inverters, converters, and other general high-current switching applications

BBS3002. P-Channel Power MOSFET 60V, 100A, 5.8mΩ, TO-263-2L/TO-263. Features. Specifications TO-263

Allowable Power Dissipation Tc=25 C 23 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C

High-speed switching Ultrasmall package permitting applied sets to be small and slim (mounting height : 0.85mm) High allowable power dissipation

30A02CH. Bipolar Transistor 30V, 0.7A, Low VCE(sat) PNP Single CPH3. Applications. Features. Specifications

ANDNGTB05N60R2DT4G/D. RC-IGBT Application Note. For Refrigerator compressor, fan motor. 1. At the beginning

CPH6354. Power MOSFET 60V, 100mΩ, 4A, Single P-Channel. Features. Specifications

Excellent Power Device Dual buffer driver for general purpose, Dual SOIC8

2SK3747. N-Channel Power MOSFET 1500V, 2A, 13Ω, TO-3PF-3L. Features. Specifications

Low collector to emitter saturation voltage Large current capacity

5LN01C. N-Channel Small Signal MOSFET 50V, 0.1A, 7.8Ω, Single CP. Features. Specifications. Low ON-resistance Ultrahigh-speed switching 2.

Excellent Power Device Dual inverter driver for general purpose, Dual SOIC8

2SJ661. P-Channel Power MOSFET 60V, 38A, 39mΩ, TO-262-3L/TO-263-2L. Features. Specifications. ON-resistance RDS(on)1=29.5mΩ(typ.

(-)100V, (-)2A, Low VCE(sat), (PNP)NPN Single PCP

2SA1418/2SC3648. Bipolar Transistor. ( )160V, ( )0.7A, Low VCE(sat), (PNP)NPN Single PCP. Applicaitons Color TV audio output, inverter

ATP114. P-Channel Power MOSFET 60V, 55A, 16mΩ, Single ATPAK. Features. Specifications. ON-resistance RDS(on)1=12mΩ(typ.) 4V drive Protection diode in

500 mw When mounted on ceramic substrate (250mm 2 0.8mm) 1.3 W Junction Temperature Tj 150 C Storage Temperature Tstg --55 to +150 C

SMA3107. MMIC Amplifier, 3V, 6mA, 0.1 to 2.8GHz, MCPH6. Features. Specifications

3LP01SS. P-Channel Small Signal MOSFET 30V, 0.1A, 10.4Ω, Single SSFP. Features. Specifications. Low ON-resistance High-speed switching 2.

50V, 0.5A, Low IR, Monolithic Dual CP Common Cathode

2SD1012. Bipolar Transistor 15V, 0.7A, Low VCE(sat), NPN Single SPA. Specifications. Absolute Maximum Ratings at Ta=25 C

PIN Diode Dual series Pin Diode for VHF, UHF and AGC 50V, 50mA, rs=max 4.5Ω, MCP

ATP206. N-Channel Power MOSFET 40V, 40A, 16mΩ, Single ATPAK. Features. Specifications. Low ON-resistance 4.5V drive Halogen free compliance

MCH6662. Power MOSFET 20V, 160mΩ, 2A, Dual N-Channel. Features. Specifications

LA6581DM. Fan Motor Driver BLT Driver Single-Phase Full-Wave

ECH8663R. N-Channel Power MOSFET 30V, 8A, 20.5mΩ, Dual ECH8. Features. Specifications

EMH2604. Power MOSFET 20V, 4A, 45mΩ, 20V, 3A, 85mΩ, Complementary Dual EMH8. Features. Specifications

Low collector-to-emitter saturation voltage Large current capacity and wide ASO

ECH8660. Power MOSFET 30V, 4.5A, 59mΩ, 30V, 4.5A, 59mΩ, Complementary Dual ECH8. Features. Specifications

SMA3117. MMIC Amplifiler, 5V, 22.7mA, 0.1 to 3GHz, MCPH6. Features. Specifications

NDUL03N150C. N-Channel Power MOSFET 1500V, 2.5A, 10.5Ω, TO-3PF-3L. Features. Specifications

MMIC Mixer, IIP3=15dBm, MCPH6

Low collector-to-emitter saturation voltage Fast switching speed

NVC6S5A444NLZ. Power MOSFET. 60 V, 78 m, 4.5 A, N Channel

LB1668 LB1668M. Monolithic Digital IC 2-Phase Unipolar Brushless Motor Drivers. Ordering number : EN4944C.

Overview The LA5744MP is a separately-excited step-down switching regulator (variable type).

LA5774. Overview The LA5774 is a Separately-excited step-down switching regulator (variable type).

SMA3109. MMIC Amplifier, 3V, 16mA, 0.1 to 3.6GHz, MCPH6. Features. Specifications. Low current. : ICC=16mA typ. Absolute Maximum Ratings at Ta=25 C

LV8400V. Forward/Reverse Motor Driver. Bi-CMOS IC

Overview The LA5735MC is a separately-excited step-down switching regulator (variable type).

10 pf VDS=5V, VGS=0V, f=1mhz Reverse Transfer Capacitance Crss 3.0 pf Noise Figure NF VDS=5V, Rg=1kΩ, ID=1mA, f=1khz 1.5 db

Parameter Symbol Conditions Ratings Unit

NSVF6003SB6/D. RF Transistor 12 V, 150 ma, ft = 7 GHz, NPN Single

Transcription:

Ordering number : ENA2283A NGTB10N60FG N-Channel IGBT 600V, 10A, VCE(sat);1.5V, TO-220F-3FS http://onsemi.com Features IGBT VCE (sat)=1.5v typ. (IC=10A, VGE=15V) IGBT IC=20A (Tc=25 C) Adaption of full isolation type package 5μs short circuit capability Diode VF=1.3V typ.(if=10a) Diode trr=70ns typ. Enhansment type Applications Power factor correction of white goods appliance General purpose inverter Specifications Absolute Maximum Ratings at Ta = 25 C, Unless otherwise specified Parameter Symbol Conditions Value Unit Collector to Emitter Voltage VCES 600 V Gate to Emitter Voltage VGES ±20 V Collector Current (DC) IC* 1 Limited by Tjmax @ Tc=25 C * 2 20 A @ Tc=100 C * 2 10 A Collector Current (Pulse) ICP Pulse width Limited by Tjmax 72 A Diode Average Output Current IO 10 A Allowable Power Dissipation PD Tc=25 C (Our ideal heat dissipation condition) * 2 40 W Junction Temperature Tj 150 C Storage Temperature Tstg - 55 to +150 C Note : *1 Collector Current is calculated from the following formula. Tjmax - Tc I C (Tc)= Rth(j-c) VCE(sat) (IC(Tc)) *2 Our condition is radiation from backside. The method is applying silicone grease to the backside of the device and attaching the device to water-cooled radiator made of aluminium. Electrical Characteristics at Ta = 25 C, Unless otherwise specified TO-220F-3FS Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Value Parameter Symbol Conditions Unit min typ max Collector to Emitter Breakdown Voltage V(BR)CES IC=500μA, VGE=0V 600 V Tc=25 C 10 μa Collector to Emitter Cut off Current ICES VCE=600V, VGE=0V Tc=125 C 1 ma Gate to Emitter Leakage Current IGES VGE=±20V, VCE =0V ±100 na Gate to Emitter Threshold Voltage VGE(off) VCE =20V, IC=250μA 4.5 6.5 V Tc=25 C 1.5 1.7 V Collector to Emitter Saturation Voltage VCE(sat) VGE=15V, IC=10A Tc=125 C 1.7 V Diode Forward Voltage VF IF=10A 1.3 V Input Capacitance Cies 1440 pf Output Capacitance Coes VCE =20V,f=1MHz 60 pf Reverse Transfer Capacitance Cres 30 pf ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data sheet. Continued on next page. Semiconductor Components Industries, LLC, 2014 April, 2014 41814 TKIM TC-00003096/13014 TKIM No.A2283-1/6

Continued from preceding page. Value Parameter Symbol Conditions Unit min typ max Turn-ON Delay Time td(on) 40 ns Rise Time tr VCC=300V,IC=10A 23 ns Turn-ON Time ton RG=30Ω,L=200μH 110 ns Turn-OFF Delay Time td(off) VGE=0V/15V Vclamp=400V 145 ns Fall Time tf See Fig.1, See Fig.2 90 ns Turn-OFF Time toff 240 ns Total Gate Charge Qg 55 nc Gate to Emitter Charge Qge VCE =300V, VGE=15V, IC=10A 20 nc Gate to Collector Miller Charge Qgc 10 nc Diode Reverse Recovery Time trr IF=10A, di/dt=100a/μs, VCC=50V, See Fig.3 70 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Thermal Characteristics at Ta = 25 C, Unless otherwise specified Parameter Symbol Conditions Value Unit Thermal Resistance IGBT (junction- Case) Rth(j-c) (IGBT) Tc=25 C (Our ideal heat dissipation condition)*2 3.09 C /W Thermal Resistance Diode (junction- Case) Rth(j-c) (Diode) Tc=25 C (Our ideal heat dissipation condition)*2 4 C /W Thermal Resistance (junction- ambient) Rth(j-a) 59.5 C /W Fig.1 Switching Time Test Circuit Fig.2 Timing Chart VGE 90% 0 IC 90% 90% 0 VCE tf tr td(off) toff td(on) ton IT16383 Fig.3 Reverse Recovery Time Test Circuit No.A2283-2/6

No.A2283-3/6

No.A2283-4/6

No.A2283-5/6

Package Dimensions NGTB10N60FG TO-220F-3FS CASE 221AM ISSUE O Unit : mm 1: Gate 2: Collector 3: Emitter Ordering & Package Information Marking Electrical Connection Device Package Shipping note 2 NGTB10N60FG TO-220F-3FS SC-67 50 pcs. / tube Pb-Free GTB10N LOT No. 60 1 3 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitabilityof its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A2283-6/6