WINTER SCRAPBOOK KIT WINTER 2018 Scrapbook Kit Projects from Meghann Andrew
Q U A R T E R LY C R A F T K I T S step-by-stepinstructions instructions++tips sketch step-by-step JOYFUL (24x12) 1 Select two pieces of Lava cardstock as layout base. Punch a scalloped border along bottom edge of both cardstock pieces. Trim two.75 x 12 strips of Christmas Jammies paper (plaid side) and adhere behind punched border. D ESI GN TI P: Place the right edge of the left cardstock and the left edge of the right cardstock in center of scallop punch so the two halves will match up in the center. 6 Print two 4 x 6 s and one 8.5 x 4.75. Use dimensional adhesive to adhere a 4 x 6 on left side, 1.5 from top edge and 2 from left edge. Adhere second 4 x 6 on left side, 4.25 from top edge and 6.75 from left edge. Adhere largest on right side of layout, 3 from top edge and.25 from center seam. 7 Using kit stamps with brown ink, stamp OH WHAT FUN repeatedly above second 4 x 6. (cont d) 2 Cut a 12 x 9 piece of Cotton Candy plaid cardstock. Cut 3.25 from the 12 side, leaving a 8.75 x 9 piece and a 3.25 x 9 piece. Adhere 8.75 piece to left side of layout along center seam, 1.25 from top edge. Adhere 3.25 piece to right side of layout, aligned with first piece. 3 Cut one 11 x 3 piece and one 11.5 x 3 piece of Snow Much Fun paper (stripe side). On the 11 piece, notch left side to create a banner. Adhere to left side of layout, along center seam and 6 from top edge. Adhere 11.5 piece to right side of layout, aligned with first piece. 4 Adhere a pink Typecast label to left edge of striped paper (banner end) using dimensional adhesive. 5 Cut a 10.5 x 1.25 piece and a 12 x 1.25 piece of Kraft Stars cardstock. On the 10.5 piece, notch left side to create a banner. Adhere to left side of layout along center seam, 7.25 from top edge. Adhere 12 piece to right side of layout, aligned with first piece.
8 Using kit cut files, electronically cut JOY from Christmas Jammies paper (plaid side) at 4 wide and again from Merry and Bright paper (red side). Layer diecuts and adhere together with red diecut offset behind plaid diecut. Use dimensional adhesive to adhere to layout just above OH WHAT FUN stamping. 9 Select Thickers to spell out FUL and adhere to right of JOY diecut. 0 Write or type journaling onto red label from ephemera pack and stamp date if desired. Punch a hole at top of label and thread with twine. Use dimensional adhesive to adhere to layout so it overlaps both 4 x 6 s. Select TIS THE SEASON pink banner from ephemera pack and adhere to left of journaling tag. { Using kit stamps and embossing ink, stamp five star shapes onto scrap white cardstock and heat set with gold or copper embossing powder. Trim out stars. } On left side of layout, create two embellishment groupings consissting of one red circle snowflake diecut from ephemera pack, one acrylic star, one embossed star and one enamel dot. Adhere groupings at bottom left corner of pink plaid cardstock and at bottom right corner of title. q On right side of layout, use kit stamps with brown ink to stamp THE DETAILS onto pink plaid cardstock, just below striped paper and 1 from left edge. Cut tag from Cozy Mittens paper (ivory burlap side) at 2.5 wide. Turn tag upside down and type or write journaling on bottom 2 of tag. Thread twine bow through hole and tie bow. Adhere tag under bottom edge of large as shown. Affix a fabric button to edge of journaling tag. e Select snow globe diecut from ephemera pack and use dimensional adhesive to adhere to bottom edge of striped paper as shown. Adhere the third embossed star slightly overlapping snow globe diecut, then add an enamel dot to right of star on journaling tag. r Cut ALL I WANT FOR CHRISTMAS IS YOU card from Christmas Jammies paper to measure 2.5 x 3.5. Cut a 3 x 4 piece of Cotton Candy plaid cardstock and mount card on pink plaid cardstock. Use dimensional adhesive to adhere at a slight angle to right of large as shown. t Select pink heart diecut from ephemera pack and use dimensional adhesive to adhere at bottom right corner of large. Adhere fourth embossed star and enamel dot near heart as shown. y Select pink diecut snowflake circle from ephemera pack and adhere tucked underneath top edge of ALL I WANT FOR CHRISTMAS IS YOU card. Select bird diecut from ephemera pack and use dimensional adhesive to adhere to top right corner of large. Add the final embossed star to right and just above bird. Embellish with enamel dot. w Using electronic cutting software with kit cut files, ungroup the snowman tag file and delete snowman outline from art. 4 x 6 title 4 x 6 8.5 x 4.75
step-by-step instructions layout instructions + tips CHILLY FUN (12x12) 1 Select Mysterious Teal cardstock as layout base. Cut out a 10 x 10 square from center. Set aside for later use. 2 Cut Snuggled Up paper (aqua side) to 11.5 square. Cut a 2.5 square piece out from the center of paper and save for later. Adhere to center of cardstock base. 3 Cut two 2.5 square pieces from Shiverin paper and two 2.5 square pieces from Flurries paper. Cut one 2.5 square piece from Cozy Mittens paper (ivory burlap side). Cut one 2.5 square piece from Cotton Candy plaid cardstock. Distress edges of all squares. Adhere squares in a grid of diamonds as shown, overlapping papers.25. (No paper square will be in middle of grid). Add machine stitching through center of the diamonds, if desired. 4 Adhere a 6 x 4 to a 6.25 x 4.25 piece of Diamond cardstock. Using a mini stapler, staple the FREEZIN SEASON diecut to top left corner of. Use dimensional adhesive to adhere to center of layout. 5 Adhere acrylic word FUN to ivory burlap diamond. Use dimensional adhesive to adhere CHILLY diecut above acrylic word. Stamp date under title, if desired. 6 Using kit stamps and pink ink, stamp large snowflake onto scrap white cardstock. Trim out snowflake, tuck it behind left edge of mat and adhere using dimensional adhesive. Select heart diecut from ephemera pack and adhere to center of snowflake. (cont d)
step-by-step instructions layout instructions + tips + sketch 7 Using kit stamps with teal ink, stamp #BRRRRRR onto a gold Typecast label. Adhere to center of dark gray dotted diamond. Select snowflake circle from epherma pack and use dimensional adhesive to adhere overlapping label. Embellish center of diecut circle with enamel dot. 8 Select penguin diecut from ephemera pack. Use dimensional adhesive to adhere to bottom center of snowflake diamond. 9 Select BABY IT S COLD OUTSIDE diecut from ephemera pack and use dimensional adhesive to adhere to center of aqua patterned diamond. 0 Type or write journaling on two gold Typecast labels and adhere to top and bottom edge of penguin diamond. Select SHIVERIN SEASON diecut from ephemera pack and use dimensional adhesive to adhere to center of diamond. 6 x 4 title { Select ALL BUNDLED UP diecut from ephemera pack and use dimensional adhesive to adhere to center of striped diamond using. Affix a fabric button to bottom right corner of diecut. } Using electronic cutting software with kit cut files, ungroup the snowman tag file design to separate individual parts. Duplicate the outline. Delete the face. Cut the two outlines and one solid snowman shape from Diamond cardstock at 4.5 tall. Adhere two outline pieces together. Back the area behind the hat with Mysterious Teal cardstock. q Place layered snowman outline atop Shiverin paper (stripe side) and trace interior of scarf with a pencil. Trim shape with scissors outside of trace lines and adhere to back of snowman. Adhere snowman outline to solid snowman shape, but tuck mitten diecut just under scarf before completely adhering. Use a small dauber or paintbrush to add pink ink to snowman s cheeks and two pink enamel dots to midsection. Use dimensional adhesive to adhere snowman, slightly overlapping right edge of. w Tuck an acrylic snowflake under right side of snowman and adhere using glue dots.
step-by-step card instructions WINTER WISHES CARD (4.25X5.5) 1 Trim a 4.25 x 5.5 piece of Shiverin paper (stripe side). Adhere to an A2 card base and set aside. 2 Cut a piece of Diamond cardstock to 4 x 5.25. 3 Using kit stamps with pink ink, stamp three small snowflakes on Diamond cardstock: at top edge center, at left edge center and at right edge center. 7 Select trees diecut from ephemera pack and adhere tucked behind first cardstock hill. Adhere this piece to Diamond cardstock piece, lining up bottom edges. 8 Affix a gold Typecast label to right edge of Diamond cardstock piece, 1.25 from top edge. Tuck right edge of label around back of cardstock. Wrap a piece of twine once around the Diamond cardstock piece and tie bow just above gold label. 4 Using kit cut files, electronically cut two snowflakes from Diamond cardstock at 2 wide. Adhere to top left corner and center right edge of Diamond cardstock piece. 9 Select WINTER WISHES & ESKIMO KISSES diecut and adhere using dimensional adhesive in upper right corner of card, atop label and baker s twine. 5 Cut a 4 x 1.75 and a 4 x 1.25 piece of Diamond cardstock. Hand-cut a curvy edge at both tops, the larger piece concave on left side, and smaller piece convex on left side. Ink top edges of cardstock pieces with a mint-coloured ink and adhere together, lining up bottom edges. 0 Mount Diamond cardstock piece on striped card base using dimensional adhesive. { Embellish card with enamel dots. 6 Cut manufacturer s strip from base of Snuggled Up paper. Trim to 4 and adhere to base of cardstock hills. Select igloo diecut and adhere to top edge of patterned paper strip.
designer & kit cut files Meghann Andrew is wife to a Brit and mother to a former micro-preemie girl who is now a happy, healthy four-year-old. Before becoming a stay-athome mother, she was an interior designer for the hospitality industry, and she has used her knowledge of design to drive most of her creative decisions. Meghann loves to capture life with her camera and make beautiful creations with those s. She currently teaches two scrapbooking classes at Big Picture Classes and is the Classroom and Blog Coordinator for Elle s Studio. Besides documenting life, Meghann loves to be in the kitchen cooking and baking for the people she loves. She confesses to drinking way too much coffee, is completely addicted to National Public Radio, and feels very blessed with the life she s been given! See more of Meghann s work at: www.meghannandrew.com ONLINE BONUS To download these exclusive cut files, please visit: www./sctwinter18-winter-wonderland