Features SWITCHING REGULATO OR APPLICATION Drain-Source breakdown voltage: BV DSS =600V (Min.) Low gate charge: Q g = 3.9nC (Typ.) Low drain-source On resistance: R DS(on) =11.5Ω (Max.) 100% avalanche tested RoHS compliant device SMK0160IS Advanced N-Ch Power MOSFET Ordering Information Part Number Marking Package G D S SMK0160IS SMK0160 I-PAK (Short Lead) I-PAK Marking Information SMK 0160 YWWW Column 1, 2: Device Code Column 3: Production Information e.g.) YWW -. Y: Year Code -. WW: Week Code Absolute maximum ratings (T T C =25 C unless otherwise noted) Characteristic Symbol Rating Unit Drain-source voltage V DS SS 600 V Gate-source voltage V GS SS ±30 V Drain current (DC) * I D T c =25 C Tc=100 C 1 0.77 A A Drain current (Pulsed) * I DM 4 A Single pulsed avalanche energy (Note 2) E AS 49 mj Repetitive avalanche current (Note 1) I AR 1 A Repetitive avalanche energy (Note 1) E AR 2. 5 mj Power dissipation PD 28 W Junction temperature TJ 150 C Storage temperature range T st tg -55~ 150 C * Limited only maximum junction temperature Rev. date: 22-MAR-12 KSD-T6Q014-000 www.auk.co.kr 1 of 8
Thermal Characteristics SMK0160IS Characteristic Symbol Rating Unit Thermal resistance, junction to case R th(j-c) Max. 4.46 Thermal resistance, junction to ambient R th(j-a) Max. 62.5 C/W Electrical Characteristics (T C =25 C unless otherwise noted) Characteristic Symbol Test Condition Min. Typ. Max. Unit Drain-source breakdown voltage BV DSS I D =250uA, V GS =0 600 - - V Gate threshold voltage V GS(th) I D =250uA, V DS =V GS 2-4 V Drain-source cut-off current I DSS V DS =600V, V GS =0V - - 1 ua Gate leakage current I GSS V DS =0V, V GS =±30V - - ±100 na Drain-source on-resistance R DS(ON) V GS =10V, I D =0.5A - 9.3 11.5 Ω Forward transfer conductance (Note 3) g fs V DS =10V, I D =0.5A - 0.32 - S Input capacitance C iss - 131 164 Output capacitance C oss V DS =25V, V GS =0V, f=1mhz - 19.4 24.3 Reverse transfer capacitance C rss - 3.4 4.3 Turn-on delay time (Note 3,4) t d(on) - 5.5 - Rise time (Note 3,4) t r V DD =300V, I D =1A, - 5 - Turn-off delay time (Note 3,4) t d(off) R G =25Ω - 13 - Fall time (Note 3,4) t f - 28 - (Note 3,4) Q g Total gate charge - 3.9 4.9 Gate-source charge (Note 3,4) Q gs V DS =480V, V GS =10V, I D =1A - 1.7 - Gate-drain charge (Note 3,4) Q gd - 0.85 - pf ns nc Source-Drain Diode Ratings and Characteristics (T C =25 C unless otherwise noted) Characteristic Symbol Test Condition Min. Typ. Max. Unit Source current (DC) I S Integral reverse diode - - 1.0 A Source current (Pulsed) I SM in the MOSFET - - 4.0 A Forward voltage V SD V GS =0V, I S =1A - - 1.4 V Reverse recovery time (Note 3,4) t rr I S =1A, V GS =0V - 190 - ns Reverse recovery charge (Note 3,4) Q rr di F /dt=100a/us - 0.53 - uc Note: 1. Repeated rating: Pulse width limited by safe operating area 2. L=90mH, I AS =1A, V DD =50V, R G =25Ω, Starting T J =25 C 3. Pulse test: Pulse width 300us, Duty cycle 2% 4. Essentially independent of operating temperature typical characteristics 2 of 8
Electrical Characteristics Curves Fig. 1 I D - V DS Fig. 2 I D - V GS - Fig. 3 R DS(on) - I D Fig. 4 I S - V SD Fig. 5 Capacitance - V DS Fig. 6 V GS - Q G 3 of 8
Fig. 7 V DSS - T J Fig. 8 R DS(on) - T J C C Fig. 9 I D - T a Fig. 10 Safe Operating Area * 4 of 8
Fig. 11 Gate Charge Test Circuit & Waveform SMK0160IS Fig. 12 Resistive Switching Test Circuit & Waveform Fig. 13 E AS Test Circuit & Waveform 5 of 8
Fig. 14 Diode Reverse Recovery Time Test Circuit & Waveform 6 of 8
Package Outline Dimensions 7 of 8
The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. 8 of 8