HIA AIR CARGO HAMILTON ADDENDUM # (This Addendum consists of six () pages) Cover sheet Schedule time lines for Architectural Precast, Miscellaneous Metals, Insulated Metal Panels, Roofing and Aluminum Curtain Walls, Windows and Glazing (in original RFP it was noted that the schedule would be issued in an addendum). Addendum No. A0 (Architectural) o Text 1 page o o SK-10b o SK-11
Addendum No. A0 Page 1 of 2 Suite 10 Tel: 905-1-7777 Fax: 905-1-7717 www.chamberlain-online.com Project: Hamilton Air Cargo Logistics Facility Hanger Service Road, Hamilton, ON Date: September 2, 2014 Project No. 11402 The following information supplements and/or supersedes the id Documents issued on August 22, 2014. This addendum forms part of the Contract Documents and is to be read, interpreted, and coordinated with all other parts. The cost of all contained herein is to be included in the contract sum. The following revisions supersede the information contained in the original drawings and specifications issued for the above-named project to the extent referenced and shall become part thereof. Acknowledge receipt of this Addendum by inserting its number on the Tender Form. Failure to do so may subject bidder to disqualification. This Addendum consists of four pages Drawings: 1.1 A101 Ground Floor Plan 1.1.1 A vestibule added to Cargojet tenant between grid lines 1, 2 with grid lines A1, as attached sketch (SK-10). 1.1.2 Column protector has been added to the columns at grid lines 4/, 5/, / and 5/C 1.1. Charging stations have been added to Cargojet warehouse total of (8) located between grid lines E1-E&8, E1- E&8, E-D1&8, D1-D&8, D-C1&8, C1-C&8, 1-&8, C-1&2 and between C1-C&outside of washrooms wall. 1.1.4 At GC Manager office at ground floor, the door number is (120) 1.1.5 Scissor lifts at loading docks are 8.0 wide. The pits sizes to be confirmed with tenant 1.1. The scale pits sizes to be confirmed with tenant 1.2 A01 Door Schedule 1.2.1 Hollow metal door jamb and head details as attached sketch (SK-11) 1.2.2 The door spec. at GC Manager Office at ground floor (120) is: Door type G, width is 915mm, height is 202mm, door material is HM, thickness is 45mm, frame material is HM, frame type is A, no fire rating is required. 1.2. At door no.(100t), the frame type has been changed from HM to Steel 1.2.4 At door no. (11b), the door type has been changed from type H to type F 1.2.5 A new door at Cargojet vestibule has been added. The door no. is (), type K, 915mmW X 2128mm H, X 45mm thickness, door material is aluminium/glass, frame material is aluminium, with panic hardware, no fire rating is required, provide automatic door opener set in interior curtain wall as attached sketch (,SK- 10b) 1.2. Door no. (100q): The size has been changed from 18.0 W x12.0 H to 14.0 x 12.0 H 1.2.7 Door no. (100r): The size has been changed from 18.0 W x12.0 H to 14.0 x 12.0 H 1.2.8 Doors no. ((100a), (100b), (100c), (100d), (100e), (100f), (100g) and (100h); The size has been changed from 9.0 W x 10.0 H to 8.0 W x 10.0 H 1.2.9 Replace solid core wood doors with hollow metal doors 1. A02 Window& Room Schedule 1..1 Curtain wall () has been updated as attached sketch (SK-10b) 1..2 Interior curtain walls have been added (CW), (CW4) as attached sketch (,SK-10b) End of addendum no. A0 Rev. (Mar/0) Ext. - Form Q010
00 100 SEALANT (AS REQUIRED) POP RIVETS FRAMED OPENING SEE STRUCT.DWGS. ROD AT OTH SIDES FASTENER (AS REQUIRED) PREFINISHED CURTAIN WAL THERMALLY ROKEN FRAME WITH SEALED DOULE GLAZING ROD AT OTH SIDES CAP TRIM 4 CURTAIN WALL JAM DETAIL AT CJ VEST. 1 : 10 40 127 2 CONFIRM W/ CURTAIN WALL MANUFACTURER 2 127 CONFIRM W/ CURTAIN WALL MANUFACTURER 102 CONFIRM W/CURTAIN WALL MANUFACTURER 101a INTERIOR CURTAIN WALL CW4 PREFINISHED CURTAIN WALL THERMALLY ROKEN FRAME WITH SEALED DOULE GLAZING PLAN DETAIL AT VEST. 1 : 10 Suite 10 Tel: 905.1.7777 Fax: 905.1.7717 www.chamberlainipd.com Architects Constructors Managers NO. ISSUED DATE ADDENDUM NO. SEPTEME R 2,2014 1 2 00 8000 4 102a C:\11402\11402-Air Cargo-Hamilton- 2014.04.0_htanious.rvt STEEL FRAMING SEE STRUCT.DWGS HSS GIRT SEE STRUCT.DWGS -19mm STRUC. CEMENT OARD TYPE ARMOROC OR EQUAL -152mm STEEL JOIST -PREFIN. ALUMINUM CEILING TILES. COLOUR TO MATCH CURTAIN WALL MULLEON DOCUM. 101 2 SECTION DETAIL @CJ VEST. 1 : 50 2252 048 SECOND FLOOR 500 T/O GROUND FLOOR 0 A A1 400 5000 5000 400 STAIR NO.1 UP 102 WT5 00 1505 180 DOCUM. 101 8450 102b 8848 101a 45 00 500 2997 150 4 1 ENLARGED PLAN@CJ VEST. 1 : 100 1752 CW CW4 2 2 1 SK-10b 101b WT4 PROJECT NAME Hamilton International Air Cargo Logistics Facility PROJECT ADDRESS Hanger Service Road, Hamilton International Airport, Hamilton, ON SHEET NAME PROJECT NO.: 11402 DRAWN Y HT PLOT DATE 09/18/14 SCALE As indicated DRAWING:
GENERAL NOTES 1. EGIN LAYOUT OF CEILING TILES AT CENTER OF ROOMS AS SHOWN 2. CENTER LIGHT FIXTURES ON CEILING TILE. SEE ELECTRICAL DWGS. FOR DETAILED LIGHTING LAYOUT 4. SEE MECHANICAL DWGS. FOR DETAILED SUPPLY& RETURN LAYOUT Suite 10 Architects Constructors Managers 2 Tel: 905.1.7777 Fax: 905.1.7717 www.chamberlainipd.com NO. ISSUED DATE ADDENDUM NO. SEPTEME R 2,2014 PREFIN. ALUMINUM CEILING TILES. COLOUR TO MATCH CURTAIN WALL MULLEON 4 RCP AT SK-10b 1 : 50 C:\11402\11402-Air Cargo-Hamilton- 2014.04.0_htanious.rvt LEGEND : DOULE GLAZED : SINGLE GLAZED : TEMPERED GLASS 048 819 2077 715 715 158 CW4 INTERIOR CURTAIN WALL AT 048 819 2077 91 91 915 102 04 REFER TO DOOR SCHEDULE CW INTERIOR CURTAIN WALL AT 048 2077 819 929 929 49 879 101 914 929 REFER TO DOOR SCHEDULE CURTAIN WALL AT SOUTH ELEVATION PROJECT NAME Hamilton International Air Cargo Logistics Facility PROJECT ADDRESS Hanger Service Road, Hamilton International Airport, Hamilton, ON SHEET NAME PROJECT NO.: 11402 DRAWN Y HT PLOT DATE 09/2/14 SCALE As indicated DRAWING: SK-10b
"LOW PROFILE" THROUGH FASTENER POP RIVETS EXTERIOR CAP TRIM SEALANT (AS EQUIRED) FASTENER (AS REQUIRED) FRAMED OPENING SEE STRUCT.DWGS. DRIP FLASHING FIELD CUT FEMALE JOINTS WHERE REQUIRED INSULATED THERMALLY ROKEN FRAME SK-11 ROD AROUND DOOR FRAME OTH SIDES INSULATED DOOR 2 HOLLOW METAL DOOR HEAD DETAIL 1 : 5 POP RIVETS ROD AROUND DOOR FRAME OTH SIDES 100 INSULATED DOOR INSULATED THERMALLY ROKEN FRAME SEALANT (AS REQUIRED) FASTENER (AS REQUIRED) FRAMED OPENING SEE STRUCT.DWGS. 00 SK-11 1 HOLLOW METAL DOOR JAM DETAIL (TYP.) 1 : 5 GRID PROJECT NAME Suite 10 Tel: 905.1.7777 Fax: 905.1.7717 www.chamberlain-online.com Architects Constructors Managers PROJECT ADDRESS Hanger Service Road, Hamilton International Airport, Hamilton, ON SHEET NAME PROJECT NO.: DRAWN Y C:\11402\11402-Air Cargo-Hamilton- 2014.04.0_htanious.rvt Hamilton International Air Cargo Logistics Facility PLOT DATE SCALE 1 : 5 DRAWING: HOLLOW METAL DOOR FRAME DETAILS 11402 HT 09/22/14 SK-11 Revision Schedule NO. REVISIONS DATE 1 ADDENDUM NO. SEPTEMER 2,2014