1
|
|
- Franklin Bradford
- 5 years ago
- Views:
Transcription
1 1
2 CONTENTS 1. Company Profile 2. Main Products 3. New Products 4. Comparison -General 5. Attachment drill features FEED SYSTEM 6. Test cert and property right property rights 2
3 1. Company Profile Sales Network : 31 countries in the world Head office & factory : Gyeonggi Do, Korea Establish Capital 1.2 million Employees 39 Turn-over 10 million R&D : Seoul 3
4 2. Main Products 4
5 New Products EXCAVATOR ROCK DRILL This machine specially be used to drilling bushing holes, rock bolt holes in the rock mass for the purpose of removing rock at the Mining site, stone pit, tunnel construction site, it be improved from disadvantage of crawler drills/pneumatic drills and It can simply attached to excavator to do drilling. We are only one manufacturer of attachment rock drill in Korea and it was developed by our self. Compare with crawler rock drill and pneumatic rock drill, our excavator rock drill has following advantages. Competitive price Wide working range Low fuel cost Low labor cost Cable and wire-less control 5
6 4-1 Comparison -General Pneumatic rock drill Drill + Compressor Attachment rock dill Crawler rock drill Weakness accessibility at rough job site Narrow working range Low working speed (around 7 minutes for 3m) Environmental pollution At least 2 workers Needs additional Compressor Easily access to any job site Wide working range High working speed (around 2minutes 30 seconds) Low price Only one operator Standard Compressor Weakness accessibility at rough job site Narrow working range High price High fuel consumption Limited view (control only in side of cabin ) 6
7 4-2 Comparison Working range A B C D E F M inch Pneumatic drill Attachment drill Crawler drill Working range of competitors - Working range be 3m~5m from equipment center to drill position (FINE rock drill at least 9.1m) - Up and down side horizontal working be unable (FINE rock drill - up and down side over 90 degrees ) 7
8 4-3 Comparison Working range (detail) 9.1m Vertical working 9.1m Tilt right side 15 degrees Tilt left side 10degrees Horizontal drilling depth 10.8m Up side drilling 90degrees 8
9 4-4 Comparison Other advantage Hardness structure - Excavator Boom, Arm Included all main functions of crawler drill Simple installation & uninstallation Auto rod changer. Dust Collector Comp. same as other Attachments Remote cont. Cable and wire less control - wide view Simple maintenance Use Excavator, - standard bit, rod, shank adaptor Easy transportation by 5ton truck 9
10 5-1 Attachment drill features FEED SYSTEM Fist Sensor - Sensing the position of drifter to changing Rod quickly Hose carrire Second Sensor - Prevent Base plate to touch Feed plate when the drifter going up to avoid their crack 2 1 Sensor Hose Carrier - Protect hydraulic hose from outside precussion 10
11 5-2 Attachment drill features DRIFTER Model Weight Impact Power Rotation Speed Rotation Torque Hydraulic Pressure Hydraulic Oil Flow FD kg 20kw 0~290rmp 690Nm 220bar 90 lpm 11
12 Compressor 5-3 Attachment drill features COMPRESSOR 1. Just use pressure and flow of excavator without other power 2. Can be installed to behind of cabin and it not affect excavator moving Model UP30 UP50 Discharge Airflow 150CFM 220CFM Discharge Pressure 6bar 8bar 12
13 5-4 Attachment drill features DUST COLLECTOR Air Filter : 6PCS Suction : pressure 8bar, Max. 1,059 cfm Pulsing : pressure 6bar, 30L per one time adjustable pulsing interval Sorting more bigger stone by <free cleaner> 13
14 5-5 Attachment drill features AUTO ROD CHANGER Rods Holder (6pcs / 3,050mm) st rod : 3,660mm Type : T38/T45 Max. Depth : 21m 1. Setup rod position by sensor. 2. Prevention of rod dropping system 14
15 5-6 Attachment drill features Other functions Remote controller Sliding Hood Simple control Working range 10m Wide view of worker Increasing safety REMOTE CONTROLL Cable control available Receiver Increasing suction power 15
16 6-1 Test cert and property right Test report It was developed by Korea Institute of machinery & material and they represented every function test Endurance of proportional valve test Leakage of proportional valve test Drifter load test others : Drifter impacting test, remote controller reaction test, structure of FEED connection test 16
17 6-2 Test cert and property right property rights - NET certification New Excellent Technology(2012.5~2014.4) Project Hydraulic proportional Control technique for excavator attaching - Patents(4) Patent Project Rock drill system with Auto rod changer Attachment rock drill with tilting & rotation function Rock Drill for excavator attaching Control system of attachment Rock drill Contents Simplified system with hydraulic and electric technique Increased rock drill working efficiency Attachment type rock drill whole features Proportional control and Remote control 17
18 18
Drilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More information1. What does it mean: to drill? 2. Why do you drill? 3. What kind of different applications are there? 4. What do you need for drilling? 5.
Drilling Technique A Brief Description Drilling Technique 1. What does it mean: to drill? 2. Why do you drill? 3. What kind of different applications are there? 4. What do you need for drilling? 5. What
More informationPneumatic & Hydraulic
Pneumatic & Hydraulic Drill Features Guide Wheels for fast repositioning for all self-propelled machines Bolt On Guide Wheels allows drilling within 152mm of corner Heavy-Duty Feed Cylinders with oversized
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationCREATING FREE SURFACES ON HARD ROCKS USING ABRASIVE SUSPENSION WATER JET MANIPULATORS
2009 American WJTA Conference and Expo August 18-20, 2009 Houston, Texas Paper CREATING FREE SURFACES ON HARD ROCKS USING ABRASIVE SUSPENSION WATER JET MANIPULATORS Song S. Han Institute of Construction
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationPERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
More informationSandvik Mining and Construction. Dipl. Ing. Roy Rathner Regional Product Line Manager Region Europe
Dipl. Ing. Roy Rathner Regional Product Line Manager Region Europe Sandvik DPi series Construction and Surface Mining Drill Rig Hole range: 76 152 mm The route to superior performance 1986 DHA 1000 1989
More informationNew Technology Technical Review
New Technology Technical Review Les Jagger 1 Dec 2004 New technology ARM 1100 Objectives develop and prove a cutter for the Merensky reef type develop an effective, efficient method of cleaning the cutter
More informationU1050N BED TYPE MILLING CENTER.
U1050N BED TYPE MILLING CENTER www.kiheung.com KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTOMERS THROUGHOUT THE WORLD. Since founded in 1968, KIHEUNG has become one of the most advanced and leading
More informationBrandt Automatic Edgebander Optimat Model KDF 670 2C
Brandt Automatic Edgebander Optimat Model KDF 670 2C PC-16 Program Control: - Color matrix LCD screen display - 8mb RAM - Manual push button controls or program control operation Equipped with digital
More informationLooking into the future of surface drilling (its here already!)
Looking into the future of surface drilling (its here already!) Insert picture here and delete this rectangle Sverker Hartwig Vice President Technique Atlas Copco 1 This presentation includes some movie
More informationASSEMBLY MANUAL POLAR GRIPPERS
ASSEMBLY MANUAL POLAR GRIPPERS 2012 TABLE OF CONTENTS TABLE OF CONTENTS... 2 PRESENTATION... 3 AMG GRIPPERS FOR ROBOTS... 4 PREPARATION OF THE PARTS... 5 PREPARING A MAIN BOOM... 6 PREPARING A SECONDARY
More informationFLEXIROC T35,T40 SPEEDCUT. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDCUT Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension
More informationUNIT 2.1: Routine check before machines operation. Unit Objectives Tools and Equipment for Routine Check. Spanner Set
UNIT 2.1: Routine check before machines operation Unit Objectives At the end of this unit, you will be able to: 1. Learn about the tools and equipment used for routine check-up of the jack hammer. 2. Types
More informationUnderwater Tool Section
Underwater Tool Section Tools for Underwater Construction, Salvage and Demolition Stanley Hydraulic Tools is a leading worldwide provider of underwater hydraulic tools to professional divers, marine maintenance,
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationMATEC 30 HV KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
MATEC 30 HV 2000 KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de MACHINE INFO Manufacturer Type Year of manufacture Control
More informationfor impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80
for impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80 HYDRAULIC STEELWORKERS COMPACT 50, 65, 80 The Compact 50, 65 and 80 are universal and compact hydraulic steelworkers. They are equipped
More informationFS 1500 Underpinner. Owner s Manual. Volume 516. Know your FS 1500 Underpinner. framingsupplies.com
Owner s Manual Volume 516 Know your Page 1 Congratulations on your choice of 's FS 1500 underpinner. Prior to shipping, your FS 1500 was completely tested to ensure that you receive a perfectly functioning
More informationInstallation Guide. Suitable for: OEM Integration OEM Installation Retro Fit Installation
Installation Guide Suitable for: OEM Integration OEM Installation Retro Fit Installation DTI AngleBlaster release 1.1 DTI 2010 Overview Angleblaster Installation Guide A-1 To obtain the best accuracy from
More informationELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs)
ELPMB27 Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) Safety Instructions Before using the wall mount, make sure you read all of the safety instructions
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationSafety first! High quality cuts High production rate
Safety first! High quality cuts High production rate SAFE AND FAST PILE CUTTING WITH MOTOCUT It s time to replace manual disc cutters and hydraulic croppers for cutting concrete or steel piles. MotoCut
More informationSETTING UP THE MODEL 210B-2 SRA
SETTING UP THE MODEL 210B-2 SRA SAFETY PRECAUTIONS FOR THE MODEL 210B-2 SRA System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris:
More informationccu-one Products Head office 23, Sicheong-ro 940 beon-gil, Paltan-myeon, Hwaseong-si, Gyeonggi-do, Korea Tel ~7 Fax.
Products CNC Combined Machine of Plasma & Machining CNC Combined Machine of Plasma & Drilling CNC Industrial Plasma Cutting Machine CNC Duct Plasma Cutting Machine CNC Gas Cutting Machine ccu-one Head
More informationAbout us. 2
About us Global Services based at Coastal City of India, Chennai have been established during January 2012. The young team of management personals have studied at NTTF, PSG Tech. The team has more than
More informationCrawler Tractors PR 714 PR 764. Product information. Grade control systems
Crawler Tractors PR 714 PR 764 Product information Grade control systems Grade Control Systems for Crawler Tractors To be successful in spite of ever-increasing time and cost pressures, construction machinery
More informationWeeke CNC Machining Center, Model BHC 350 4/10 Optimat
Technical Specification March 11, 2004 Page 1 Weeke CNC Machining Center, Model BHC 350 4/10 Optimat Weeke's BHC 350 4/10 Optimat is a flexible CNC machining center designed primarily for routing, boring,
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationDISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR
DISKUS Double-Face-Grinding-Machines Series: DDS 457 XR DDS 600 XR DDS 750 XR DDS 457 600 750 XR Three grinding methods meeting different production problems: 1. Through-feed grinding For large mass-production
More informationSETTING UP THE MODEL 210-3, -4, and -5 EQ MT
SETTING UP THE MODEL 210-3, -4, and -5 EQ MT SAFETY PRECAUTIONS FOR THE MODEL 210-3, -4, -5 EQ MT System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flowmeter The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More informationA new sistem for harbour restoring: The Under Water Anchoring tecnology.
A new sistem for harbour restoring: The Under Water Anchoring tecnology. FOREWORD The worldwide increases in utilization of large ships for transportation has created an urgent need of deepening the seabed
More informationIMPORTANT SAFETY NOTICE
J. H. FLETCHER & CO. Box 2187 Huntington, WV 25722-2187 304/525-7811 FAX 304/525-4025 IMPORTANT SAFETY NOTICE INFORMATION BULLETIN NO. 122 TO: FROM: OWNERS AND OPERATORS OF J.H. FLETCHER & CO. UNDERGROUND
More informationTh Series HIGH SPEED MACHINING CENTERS
Th Series HIGH SPEED MACHINING CENTERS HORIZONTAL 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing of the
More informationKIHEUNG MACHINERY CO.,LTD
KIHEUNG MACHINERY CO.,LTD WiNGTRAX COLUMN TRAVEL MILLING and BORING CENTER www.kiheung.com KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTO MERS THROUGHOUT THE WORLD. Since founded in 1968, KIHEUNG has
More informationWeeke CNC Machining Center, Model BHC 500 T
Ph# 214.295.7331 Email: info@sismachinery.com DISCLAIMER: These are the ORIGINAL TECHNICAL SPECIFICATIONS of THIS NOW USED MACHINE. This does NOT guarantee or warranty the machine to be exactly as described
More informationDBF Machining Centers DBF 630 / 800
DBF Machining Centers DBF 630 / 800 2 DBF Machining Centers Turning / drilling / milling The Horizontal Machining Centers HEC 500 / 630 / 800 Athletic can be used as all-round machining centers in a versatile
More informationTOYO ROCK DRILL. Hand drill. Specifications
TOYO Rock Drills TY16 Hand drill TY16 is light-weight and easy to handle. It is a very effective unit for drilling of narrow faces, in poor footing ground, or for secondary drilling and other light jobs.
More informationLevel Measurement Techniques In A Modern Quarry
Level Measurement Techniques In A Modern Quarry John Leadbetter Mining & Bulk Handling Manager VEGA Australia History The application and use of Level Measurement in Quarries has come from very basic techniques.
More informationCS276D. CASSESE SA Zone Industrielle - F VERNEUIL L'ETANG. Telecopie : (1)
CS276D S.A. CASSESE Z.I. - 77390 VERNEUIL L'ETANG SIREN 308 305 333 00038 S.A. au capital de 5 000 000 F Téléphone : 01 64 42 49 50 Fax 01 64 42 58 90 CASSESE SA Zone Industrielle - F 77390 VERNEUIL L'ETANG.
More informationDuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту
DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY The BNE series is renowned for its high rigidity, heavy cutting capability and outstanding precision. The new MSY model extends the ability of the BNE series
More informationOperating and Maintenance Instructions Keep for future reference
Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter 1 Index SAFETY... 3 LABELS.... 4 QUICK GUIDE including storage and transport... 5 IN-DEPTH INSTRUCTIONS.... 6 OPERATING
More informationCNC Machining Center BAZ 895n IQ
CNC Machining Center BAZ 895n IQ * Due to the continuous improvements of our products, some machine changes may apply. Features Use of SYNTEC control system, fully automatic production from labeling, loading,
More informationRT200 Series Single-axis Industrial Joystick. RunnTech
Product Features Potentiometer sensor or ; All metal construction, fully sealed design; Available with various shape mulitfunction grips; Mechanical spring-return to center or Friction-hold operation;
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationOXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE
OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12
More informationOperating and Maintenance Instructions
!! Operating and Maintenance Instructions Keep for future reference PTO400 Log Splitter 1 Index INDEX...2 SAFETY...3 LABELS..4 QUICK GUIDE including storage and transport... 5 IN DEPTH INSTRUCTIONS...
More informationTop spin Nr /
Top spin Nr. 1840 0000 / 1840 1000 Bedienungsanleitung 21-6680 28052014 / A Made in Germany Ideas for dental technology Top spin Nr. 1840 0000 / 1840 1000 Contents 1. Introduction...2 1.1 Symbols...2 2.
More informationAUTOMATIC CIRCLE BURNING AND WELDING
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup (Regardless of Direction or Rotation) Oxy-Fuel Cutting Units, Plasma Cutting Units Wire Feeders and Controls, Motorized
More informationCrushers, Shears, Splitters and Hi Pressure Power Packs
Crushers, Shears, Splitters and Hi Pressure Power Packs CC300 Concrete Crusher, MS250 Shear, CS400 Hydraulic Splitter, Kolubra Power Packs PASSION. INNOVATION. EXCELLENCE. Concrete Crusher CC300 Very strong
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationAutomotive Drive-Shaft Production Line
ES ESteel Corporation. New & Used Machinery #101, 576-8, E-Dong, Sangrok-Gu, Ansan-City, Gyeonggi Provence, South Korea TEL : +82 31 407 1144 FAX : +82 31 407 1157 http://www.esteelcorp.com e-mail : machinery@esteelcorp.com
More informationHigh Performance Heavy Duty Lathe
High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and
More informationWeeke CNC Machining Center, Model BP-140 K ATC Optimat
Weeke CNC Machining Center, Model BP-140 K ATC Optimat Weeke's BP-140 is a truly industrial machine designed primarily for pointto-point boring and machining of flat components without special workpiece
More informationSubArc Digital Series
Digital Series Issued Sept. 01 Index No. ADM/10.0 UK Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel
More informationCNC machining centres. morbidelli p800. multifunctional machining centre for panel drilling routing and edge-banding
CNC machining centres morbidelli p800 multifunctional machining centre for panel drilling routing and edge-banding morbidelli p800 Designing and building solutions to your requirements is in our DNA You
More informationOTTO ARC TABLE OF CONTENTS INTRODUCTION PIPE SYSTEMS CONTACT US! ARC-PS (Pipe System) ARC-3R (Pressing Roller Pipe Welding System)
OTTO ARC INTRODUCTION Otto Arc Systems, Inc., formerly Otto Tool, has been in business for over 27 yrs. We have provided Beveling and Facing Equipment since the day we opened our doors and have been expanding
More informationSide. Channel Blower APEX DARGANG MACHINERY CORPORATION
Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationHydrauliC breakers sb range. A solid body, an innovative tool guiding system and a remarkable hydraulic design
HydrauliC breakers sb range A solid body, an innovative tool guiding system and a remarkable hydraulic design Solid productivity you can rely on! We introduced the innovative hydraulic breaker 50 years
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationNarwhal. Boring, milling and drilling machine
Narwhal Boring, milling and drilling machine NARWHAL NARWHAL 1600 NARWHAL 2000 POWERFUL BORING AND MILLING MACHINE with independent Gundrill bta / STS drilling UNIT GALBIATI GROUP QUALITY, PRECISION, INNOVATION.
More informationHOLD IT. EVEN PRESSURE. ODD SIZES. INTRODUCING THE AUTO-PRO AUTO-ADJUST TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL
HOLD IT. INTRODUCING THE AUTO-PRO TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL EVEN PRESSURE. ODD SIZES. PATENTED MECHANISM 888.695.3055 armor-tool.com TABLE OF CONTENTS Auto-Pro
More informationMATEC 30 HV 3000 / NC
Description of the machine MATEC 30 HV 3000 / NC 1. Company 1.1. General company details Name of the company KISTNER GmbH & Co.KG Adress Industriestraße 7-9 95349 Thurnau Phone +49 9228 987-0 E-Mail info@maschinen-kistner.de
More informationEquipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02. 3D Printer Specifications
Equipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02 Tech Specifications 3D Printer Specifications Print size (X Y Z) (Not less than) 600 x 300 x 300 mm Print Speed- Range 55-75 mm/sec Layer Resolution
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 ENGINEERING TECHNOLOGY This marking guideline consists of 8 pages. MARKING GUIDELINE -2- NC930(E)(M17)V QUESTION
More informationCompact Hydraulic System for Energy Savings and High Precision. POWER Meister
Compact Hydraulic System for Energy Savings and High Precision POWER Meister POWER Meister Compact Hydraulic System Superior Energy Savings High Precision AC servo motor controls rotational speed and direction
More informationWORKHOLDING & AUTOMATION
WORKHOLDING & AUTOMATION EUROPE GmbH +43 463 287587 kosmek@kosmek.eu Clamping Supporting Positioning Compact Reliable Efficient Economical Innovative We are a long established Japanese enterprise, willing
More information2-jaw self centering rocking pneumatic gripper (series GW)
2-jaw self centering rocking pneumatic gripper (series ) Double acting. Long life and reliability, maintenance free. Various options for fastening. Optional proximity magnetic sensors. Spring closed (-NC)
More informationNATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010
NATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010 (6021012) 24 November (X-Paper) 09:00 12:00 This question paper consists of 10 pages and 1 annexure. (6021012) -2- NC920(E)(N24)V
More informationManufacturers of Wood Working Machineries
RUEI RUEI R Manufacturers of Wood Working Machineries RUEI www.rueiindustries.com RUEI 2 Welcome to Ruei Industries..! RUEI INDUSTRIES, is one of the leading manufacturer, supplier and exporter of Wood
More informationBefore Lock Installation Surface Mount Installation. Door Preparation
Installation Guide Before Lock Installation... 3 Surface Mount Installation For door thickness measuring between.01" -.91" (0.2 mm - 23 mm)... 4 Required Components... 4 Installation... 5 Door Preparation
More informationHorizontal Dewatering Depressurisation Drilling Solutions
Horizontal Dewatering Depressurisation Drilling Solutions The Specialists Experience Our team has over 40 years experience in terrains ranging from Tasmania to Papua New Guinea, and Byron Bay to the Pilbara.
More informationCAMLESS CNC 6-SPINDLE BAR MACHINE
CAMLESS CNC 6-SPINDLE BAR MACHINE B6-16 / B6-27 / B6-32 FOR YOUR TIME & COST SAVINGS SHIMADA MACHINERY CNC - Multi Spindle Machine Shimada s B6 NC Series Lathes are a family of Camless 6-spindle fed with
More informationUSER MANUAL MODEL MZ-100 BOLT TENSION CALIBRATOR
USER MANUAL MODEL MZ-100 BOLT TENSION CALIBRATOR 442 SOUTH GREEN ROAD SOUTH EUCLID, OHIO 44121 USA VOICE: 216-481-4774 FAX: 216-481-2427 www.skidmore-wilhelm.com TABLE OF CONTENTS Introduction... 2 Typical
More informationHeavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
More informationOperating Manual Axis 60mm Self Centering Vise Axis 100mm Self Centering Vise
Operating Manual Including installation and assembly instructions 80000 5-Axis 60mm Self Centering Vise 80100 5-Axis 100mm Self Centering Vise 80300 5-Axis 40mm Fixed Jaw Vise 80400 5-Axis 60mm Fixed Jaw
More informationThis review. prepares the student for nationally industry recognized assessments. A general overview of power tools is provided.
This review prepares the student for nationally industry recognized assessments. A general overview of power tools is provided. Please follow the specific instructions provided by the manufacturer. PREREQUISITE:
More informationC-15 Truck Engine 9NZ00001-UP(SEBP ) - Document Structure. Media Number -RENR Publication Date -01/07/2008 Date Updated -22/07/2008
Page 1 of 8 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: C-15 TRUCK ENGINE 9NZ Configuration: C-15 Truck Engine 9NZ00001-UP Disassembly and Assembly C-15, C-16 and C-18 Truck Engines Media
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationApplication Case. Delta Industrial Automation Products for Vertical CNC Machining Centers with Automatic Tool Changers (ATC)
Case Delta Industrial Automation Products for Vertical CNC Machining Centers with Automatic Tool Changers (ATC) Issued by Solution Center Date July, 2014 Pages 5 Applicable to Key words NC311 Series CNC
More informationPrepared for the future
Press Release INDEX turn-mill center Prepared for the future With the turn-mill center introduced during its in-house exhibition in June 2014, INDEX continues the tradition of the successful compact G-series
More informationBig Sweep Lathe Dust Catcher System
Big Sweep Lathe Dust Catcher System Version.0 Disconnect saw from power source before fitting or removing insert. Ear Protection proper ear protection when working with machinery. Use caution when handling
More informationTh Series MULTI TASKING MACHINING CENTERS
Th Series MULTI TASKING MACHINING CENTERS MULTI TASKING 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing
More informationSUMMARY. V-Lock SYSTEM BASIC ELEMENTS ACTUATORS. P V-Lock GENERAL INTRODUCTION 2. P V-Lock FIXING ELEMENTS 10 SUMMARY. P V-Lock ADAPTORS 17
SUMMARY A3 V-Lock SYSTEM P V-Lock GENERAL INTRODUCTION 2 BASIC ELEMENTS P V-Lock FIXING ELEMENTS 10 P V-Lock ADAPTORS 17 SUMMARY P PROFILES 28 P V-Lock ACCESSORIES AND SPARE PARTS 32 1 A3 GENERAL INTRODUCTION
More informationInstallation Guide. English. English
Installation Guide Safety Instructions For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the
More informationDrilling methods and commonly used machinery
Drilling methods and commonly used machinery worked out and giving a lecture by Jouko Salonen Sandvik Mining and Construction Oy Competencies required in Drilling. Straight-hole drilling and drill patterns:
More information5-Axis. Technology. Premium. 5 i. uts. End products without undercuts. Disk jig. 6P Glass multi jig. Premill multi jig. 8P Glass multi jig
Disk jig Possible to be equipped with a 98.5mm disk. Special-designed jig that can maintain high precision even after a long-time use due to its stable and durable features. 6P Glass multi jig 5Axis Machining
More informationTHE HLM SERIES MATCHPLATE MOLDING MACHINE
THE HLM SERIES MATCHPLATE MOLDING MACHINE 1 THE HLM SERIES MATCHPLATE MOLDING MACHINE THE HUNTER ADVANTAGE Since 1964, our products and our reputation have been built on the fact that (using our prescribed
More informationTUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x
TUR 4MN 3000 x 22 000 TUR 6MN WITH LOADING CRANES This lathe, produced for American client, has a unique bed configuration. It consists of two independent beds mounted on a special foundation. This solution
More informationRiGiTRAX COLUMN TRAVEL, FIXED BED.
COLUMN TRAVEL, FIXED BED www.kiheung.com KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTOMERS THROUGHOUT THE WORLD. Since founded in 1968, KIHEUNG has become one of the most advanced and leading machine
More informationA Bobcat loader becomes an efficient, cost-effective
PLANER ATTACHMENT A Bobcat loader becomes an efficient, cost-effective Bobcat 14-in. Standard-Flow Planer An economy model designed to work well on specified Bobcat loaders. The standard-flow planer is
More information