EASY TURNING TOOLS. MICRO EASY ROUGHER Replacement Cutter Option: Ci6-R1
|
|
- Amie Dixon
- 5 years ago
- Views:
Transcription
1 EASY WOOD TOOLS Specs Price & Specs Sheet EASY TURNING TOOLS Cutter EWT # Retail Maple Handle - 9" Tool Bar - 3/8" x 3.5" Overall Length " EASY START ROUGHER 9520 $ Ci3 EASY START FINISHER 9620 $ Ci4 EASY START DETAILER 9720 $ Ci6-SQ MICRO EASY ROUGHER Replacement Cutter Option: Ci6-R $ Maple Handle - 6" Tool Bar - 5/16" x 3-1/4" Overall Length - 9-1/4" Maple Handle - 12" Tool Bar - 3/8" x 4" Overall Length - 16" Maple Handle - 14" Tool Bar - 3/8" x 7" Overall Length - 21" Max Reach 3" Overall Length " American Hickory Handle - 20" Overall Length " Tool Bar - 6" Blade Length - 2 1/2" Blade Width - 3/32" Max Part-off Diameter - 4" Cut Width - 1/8" Ci5 MICRO EASY FINISHER $ Ci7 MICRO EASY DETAILER $ Easy MICRO 3-Piece Set Includes FREE 1" Radius Ci6-RI Carbide Cutter and Sturdy Tool Case MINI EASY ROUGHER $ $ Ci3 MINI EASY FINISHER 6200 $ Ci4 MINI EASY DETAILER 7200 $ MID-SIZE EASY ROUGHER 2200 $ Ci3 MID-SIZE EASY FINISHER 6300 $ Ci4 MID-SIZE EASY DETAILER 7300 $ Ci7 MID-SIZE EASY MICRO DETAILER 7700 $ FULL-SIZE EASY ROUGHER Replacement Cutter Options: Ci1-Sq or Ci1-R $ Ci0 FULL-SIZE EASY FINISHER 4200 $ Ci4 FULL-SIZE EASY DETAILER 7500 $ PRO EASY ROUGHER Replacement Cutter Options: Ci1-Sq or Ci1-R $ Ci0 PRO EASY FINISHER 3400 $ Ci4 PRO EASY DETAILER 3700 $ Pi1 1/8" EASY PARTING TOOL PT125 $
2 Specs Maple Handle - 14" Tool Bar 1/2" Sq x 8.5" Maple Handle 14" Tool Bar 3/8" x 3/4" x 7.5" EASY HOLLOWING TOOLS Cutter EWT # Retail Ci5 MID-SIZE EASY HOLLOWER # $ Ci5 MID-SIZE EASY HOLLOWER # $ Ci5 MID-SIZE EASY HOLLOWER # $ FULL-SIZE EASY HOLLOWER #1 Tool Bar 1/2" x 1" x 9.5" FULL-SIZE EASY HOLLOWER #2 Ci3 FULL-SIZE EASY HOLLOWER # $ PRO EASY HOLLOWER #1 American Hickory Handle - 20" Tool Bar 1/2" x 1" x 9.5" PRO EASY HOLLOWER #2 Ci3 PRO EASY HOLLOWER # $ GENUINE EWT CARBIDE CUTTERS Fits on EWT # Retail Easy Finishers - Full & Pro Ci0 CARBIDE CUTTER - Round 4400 $ Easy Roughers Full & Pro Ci1-SQ CARBIDE CUTTER - Square 1500 $ CARBIDE CUTTER - 4" Radius 1400 $ Ci1-R2 CARBIDE CUTTER - 2" Radius 1600 $ Easy Start Rougher Easy Roughers - Mini & Mid CARBIDE CUTTER - Square 2500 $ Ci2-R2 CARBIDE CUTTER - 2" Radius 2600 $ Easy Start Finisher, Easy Finishers Mini & Mid, Easy Hollowers Full&Pro Ci3 CARBIDE CUTTER - Round 6400 $ Easy Detailers Mini, Mid, Full and Pro Ci4 CARBIDE CUTTER - Diamond 7400 $ Easy Hollowers MICRO & Mid-Size Ci5 CARBIDE CUTTER - Round 6604 $ Easy Micro Rougher Ci6-SQ CARBIDE CUTTER - Square $ Easy Micro Rougher Ci6-R1 CARBIDE CUTTER - 1" Radius $ Easy MICRO Detailer & Mid-Size Easy Micro Detailer Ci7 CARBIDE CUTTER - Diamond $ /8" Easy Parting Tool Pi1 PARTING CUTTER - 1/8" Wide Pi126 $ 14.99
3 Fits on EWT # Retail Easy Start Mini & Mid Size Full-Size, Pro, Mid-Size & Hollower # $ $ Fits All Tools EASY TOOL LEVEL 8202 $ 4.99 Package Contents EWT # Retail Jaw Key (1/8" ball end hex driver) Chuck Key (5/16" hex t-handle) Easy Chucking Screw (double ended with 3/8" & 1/2" diam.) CHIP DEFLECTORS 3/8" LEXAN CHIP DEFLECTOR 1/2" LEXAN CHIP DEFLECTOR 3/8" Deflectors fit - Easy Starts, Minis and Mid-Size 1/2" Deflectors fit Full-Size and Pro Tools and Mid-Size #1 Hollower Level fits all tools EASY CHUCKS 1" - 8 EASY CHUCK 1 1/4" - 8 EASY CHUCK M EASY CHUCK C1000 $ C2000 $ C3030 $ M EASY CHUCK C3000 $ EASY JAWS BIG EASY JAWS EASY SPINDLE ADAPTER Grips -1 3/8" Expands - 2" Jaw Length - 7/16" Grips - 2 3/8" Expands - 3" Specs EWT # Retail CJ125 $ /8" EASY DOVETAIL JAWS Jaw Length - 7/16" CJ150 $ Grips - 1/2" Str. Expands - 1 1/4" 1/2" EASY REACH DOVETAIL JAWS Jaw Length - 1 1/4" CJ210 $ Grips - 1 3/8" Expands - 2" 1 3/8" EASY REACH DOVETAL JAWS Jaw Length - 1 1/4" CJ225 $ Grips - 3 1/2" Expands - 4 1/4" 3 1/2" EASY REACH DOVETAIL JAWS Jaw Length - 1" CJ350 $ Grips - 2 1/2", 3", 3 1/2" 3 1/2" EASY STEPPED DOVETAIL JAWS Expands - 4 1/4" Jaw Length - 1" CJ450 $ Max Grip Diam. - 10" Max Expanding Diam /2" Max Grip Diam. - 14" Max Expanding Diam /2" Max Grip Diam. - 18" Max Expanding Diam /2" Diam. - 3/4" Length - 2" Hardness - Medium Internal Threads - 1 1/4" - 8 Ext.Threads - 1" - 8 Length - 2 3/4" 1 3/8" EASY DOVETAIL JAWS () 12" BIG EASYJAWS Includes: 4) Base Jaws 4) Jaw Plates, 8) Dovetail Grippers,1) 5/32" T-handle hex wrench 16" BIG EASY JAWS Includes: 4) Base Jaws 4) Jaw Plates, 8) Dovetail Grippers,1) 5/32" T-handle hex wrench 20" BIG EASY JAW EXTENSIONS Includes: 4) Jaw Extensions, 8) mounting screws 2" EASY REACH GRIPPERS Includes: 8) Gripper Sleeves, 8) Gripper Posts, 8) Mounting Screws 1 1/4" EASY SPINDLE ADAPTER (1"-8 Male to 1 1/4"-8 Female) CJ512 $ CJ516 $ CJ520E $ CJ620 $ CA125 $ 39.99
4 Fits on EWT # Retail 1" Spindle Diameter 8 Threads per Inch FACEPLATES 1" - 8 tpi x 2" DIAMETER FACEPLATE 1" - 8 tpi x 3" DIAMETER FACEPLATE 1" - 8 tpi x 4" DIAMETER FACEPLATE F420 $ F430 $ F440 $ " Spindle Diameter 8 Threads per Inch 1 1/4"- 8 tpi x 2 1/2" DIAMETER FACEPLATE 1 1/4" - 8 tpi x 3 1/2" DIAMETER FACEPLATE 1 1/4" - 8 tpi x 4 1/2" DIAMETER FACEPLATE F625 $ F635 $ F645 $ Features EWT # Retail #2 Morse Taper, Precision angular contact bearings $ Fits live centers with 3/4-10 thread EASY CONE SET $ Features EWT # Retail COOL SMOCK / Short Sleeve / Charcoal / L Super Light Weight Breathable Material, Comfortable COOL SMOCK / Short Sleeve / Charcoal / XL High Collar, High Quality fulllength Zipper, Chest Pocket with COOL SMOCK / Short Sleeve /Charcoal /2XL Oversized Flap, Full Color Easy COOL SMOCK / Short Sleeve /Charcoal /3XL Wood Tools Logo COOL SMOCK / Short Sleeve /Charcoal /4XL 8100 $ $ $ $ $ $ $ $ $ Description EWT # Retail T-Shirts for men, women, and youth EASY LATHE ACCESSORIES EASY LIVE CENTER COOL SMOCKS COOL SMOCK / Short Sleeve / Charcoal / S COOL SMOCK / Short Sleeve / Charcoal / M COOL SMOCK / Short Sleeve /Charcoal /5XL COOL SMOCK / Short Sleeve /Charcoal /6XL T-SHIRTS EWT BADGE T-SHIRT / BLACK / S EWT BADGE T-SHIRT / BLACK / M EWT BADGE T-SHIRT / BLACK / L EWT BADGE T-SHIRT / BLACK / XL EWT BADGE T-SHIRT / BLACK / 2XL EWT BADGE T-SHIRT / BLACK / 3XL HATS 8300 $ $ $ $ $ $ Description EWT # Retail Hat EWT Logo Hat w/adjustable strap 8400 $ 23.99
5 Specs Tool Bar - 3/8" x 4" Tool Bar - 3/8" x 7" Max Reach 3" Cutter EWT # Retail MINI EASY ROUGHER 5100 $ Ci3 MINI EASY FINISHER 6500 $ Ci4 MINI EASY DETAILER 7600 $ MID-SIZE EASY ROUGHER 2100 $ Ci3 MID-SIZE EASY FINISHER 6100 $ Ci4 MID-SIZE EASY DETAILER 7100 $ UNHANDLED TOOLS FULL-SIZE EASY ROUGHER Replacement Cutter Options:Ci1-SQ&Ci1-R $ Ci0 FULL-SIZE EASY FINISHER 4100 $ Ci4 FULL-SIZE EASY DETAILER 7510 $ Tool Bar 1/2" Sq x 8.5" Ci5 MID-SIZE EASY HOLLOWER # $ Tool Bar 3/8" x 3/4" x 7.5" Ci5 MID-SIZE EASY HOLLOWER # $ Ci5 MID-SIZE EASY HOLLOWER # $ Tool Bar 1/2" X 1" X 9.5" Ci3 FULL-SIZE EASY HOLLOWER # $ Tool Bar 6", Blade 3/32" x 3" Pi1 1/8" EASY PARTING TOOL PT125U $ 94.99
EASY TURNING TOOLS. EASY START ROUGHER Replacement Cutter Option: Ci2-R2 and Ci2-R2NR EASY START FINISHER Replacement Cutter Option: Ci3-NR
EASY WOOD TOOLS Maple Handle - 9" Tool Bar - 3/8" x 3.5" Overall Length - 12.5" Maple Handle - 6" Tool Bar - 5/16" x 3-1/4" Overall Length - 9-1/4" Maple Handle - 12" Tool Bar - 3/8" x 4" Overall Length
More informationEasy Woodturning NEW!
Easy Woodturning NEW! I just wanted to make a bowl. Years ago I fell in love with Woodturning, but not the tools. Everything I had to learn about tool use and sharpening was too complicated. I knew there
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationNELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 115 inch Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationTurncrafterPlus. Variable Speed Mini Wood Lathe. User s Manual #TCLPLUS PRODUCT NO.
TurncrafterPlus Variable Speed Mini Wood Lathe PRODUCT NO. #TCLPLUS User s Manual SPECIFICATIONS OF TURNCRAFTER PLUS MINI LATHE Model number:..............................................#tclplus Motor:......................................0V
More information16" X 60" EVS TOOLROOM LATHES
16" X 60" EVS TOOLROOM LATHES MODEL SB1014-220V MODEL SB1015-440V SPECIFICATIONS Hundreds of Thousands of Lathes Sold With a Tradition of Quality Since 1906! March, 2010 by South Bend Lathe Co. For Machines
More informationTrade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationDRILLING AND MILLING MACHINES
DRILLING AND MILLING MACHINES KF 10 KF 10 L KF 20 KF 20 L KF 20 Super KF 20 L Super KF 16 L Vario KF 25 D Vario KF 25 L Vario KF 25 PRO BF 25 Super BF 25 L Super BF 30 Super FM 45 eco BF 40 eco FM 40 FM
More informationXINYU MACHINERY CO.,LTD.
ITEM BL1224 BL1237 Swing Over Bed mm φ305 φ305 Swing Over Carriage mm φ173 φ173 Swing Over Gap mm φ440 φ440 Width of bed-way mm 182 182 Distance Between Centers mm 530 940 Spindle taper M.T.5 M.T.5 Spindle
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationCOLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 2928 mm Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationChucks.
Chucks xminster Chucks xminster has been producing 4-jaw chucks for woodturning lathes since 984. The English company offers a suitable chuck size for every application, not to mention excellent value
More information- Wood-turning lathes. Quality & Reliability since 1975
- Wood-turning lathes Quality & Reliability since 1975 MANUAL TURNING LATHE PERFORMER 400-FU for the professional user Parts up to 800 mm over bed Performer 400-FU Slim spindle housing for backside works
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationMachining Technology Equipment Purchases
Allegany College of Maryland Machining Technology Equipment Purchases Equipment Specifications Michael Chronister 11-8-2018 Michael Chronister Advanced Manufacturing Project Manager 12401 Willowbrook RD
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationPage 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
More information20" WOODTURNING LATHE Model 3520A
20" WOODTURNING LATHE Model 3520A Instruction Manual & Parts List M-0460221 (800) 248-0144 www.powermatic.com SPECIFICATIONS: 3520A Lathe Table with standard extensions... 28 x 38 Distance Between Centers...
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationHAFCO METALMASTER AL-335. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L183 HAFCO METALMASTER AL-335 Centre Lathe 300 x 910mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L183.pdf Headstock Speed
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationMODEL T10809 WOOD LATHE CHUCK SET INSTRUCTIONS
MODEL T10809 WOOD LATHE CHUCK SET INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The T10809 3 3 4" Wood Lathe Chuck
More informationTool & Cutter Grinder
Tool & Cutter Grinder The Bonelle Tool and Cutter grinder (based on prof. Chaddock s Quorn) can be used to grind most kind of tools from lathe tools to end-mills and reamers. I have been grinding my end-mills
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationMATERIALS & TOOLS REQUIRED INTRODUCTION. Before you start turning, read and understand this entire procedure.
INTRODUCTION This set of instructions shows one method to turn mills.there are many other possible variations and techniques. NOTE: These instructions are specific to 'Chef Specialties' mechanism. For
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationCatalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T Welcome to the 2014/2015 catalog Dear customer, Thank you for your
More information1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
More informationBevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationHAFCO METALMASTER AL-335F. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L681 HAFCO METALMASTER AL-335F Centre Lathe 300 x 910mm Turning Capacity Page 1 of 6 Front View Left View Headstock Spindle Speed Levers Control Panel Switches Feed and Thread Gearbox
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationDrawbars for Milling Machines
Machine Tool & Drawbars for Milling Machines Made in USA Drawbars from low carbon steel, soft and black oxide plated. Drawbars are manufactured from two parts the shaft and the hex. Drawbars for Milling
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationDuality Lathe. CNC & Manually Operated Lathe. Product Datasheet.
CNC & Manually Operated Lathe www.tormach.com OVERVIEW The is a revolutionary concept in machine tools. Used in combination with a PCNC 1100 mill, this integrated machine accessory can be operated in three
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationThe premier source of parts and accessories for mini lathes and mini mills. Mini Lathe User s Guide. from LittleMachineShop.com
The premier source of parts and accessories for mini lathes and mini mills. Mini Lathe User s Guide from LittleMachineShop.com Copyright 2002, LittleMachineShop.com All rights reserved. Some photos Copyright
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationBOX TURNED. Wood&Resin. The unusual thing about this particular box. Dn Use these simple turning techniques to create a unique lidded box.
Sponsored Content TURNED Wood&Resin BOX Dn Use these simple turning techniques to create a unique lidded box. By Carl Jacobson The unusual thing about this particular box is that it s turned from a hybrid
More informationEasy Woodturning. "It's Our Turn!" Made In America
Easy Woodturning owner S MANUAL "It's Our Turn!" Made In America Just like every product we have ever made, your Easy Chuck is 100% designed and manufactured in America by Easy Wood Tools. The Easy Chuck
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department
Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More informationorder online at
F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationServoturn 410. Servoturn 410. Lathe. Conventional Precision Lathe with servo drive.
Lathe Conventional Precision Lathe with servo drive easy to operate, more reliable, more precise, for higher loads and reduced maintenance Mineral-Casting Machine Frame preloaded ball screws electronic
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationMACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationThe importance of precision cutting requires special accessories
Microstops and Drilling Accessories The importance of precision cutting requires special accessories to aide in drilling accuracy, providing tighter tolerances while protecting surface areas from skin-damage.
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationSECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationMACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
More informationPlease complete your form and hand it in at the club, along with your payment unless paying by BACS.
Clubwear Order Form Please complete your form and hand it in at the club, along with your payment unless paying by BACS. Payment can be made by Cash or BACS - which is our preferred method. Please retain
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationA Quick-Change Gearbox For The 7x Minilathe
A Quick-Change Gearbox For The 7x Minilathe Richard Hagenbuch 10 August 2002 This article describes how to a build a quick-change gearbox for your 7X minilathe. I'll describe one that I built as a prototype
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationSECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationSummer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018
Summer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018 INSULATED 50 Piece Set 1000Volt proturn 32874 50 Piece Insulated Tool Set. Insulation According to VDE 0682/part 201, EN/IEC 60900,
More informationCL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost
CL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost Ex GST Inc GST $9,490.00 $10,439.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance
More informationUNION MERCHANDISE CATALOG UGSOA INTERNATIONAL UNION
UNION MERCHANDISE CATALOG UGSOA INTERNATIONAL UNION Page 2 To Order Call: 1.800.572.6103 POLOS 6.3 oz., 100% combed cotton pique with EZ Cool wicking technology, no-pill, no-fade, no-shrink, no-curl collar,
More informationROYAL CNC COLLET CHUCKS
ROYAL CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP WITH A.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY ROYAL QUICK-GRIP CNC COLLET CHUCKS The Most Advanced Collet Chucks
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationHorological Milling Machine Bushing and Depthing Accessory
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Horological Milling Machine Bushing and Depthing Accessory P/N 2118 Overview When a non-jeweled clock or watch
More informationClausing/Colchester 13" (320mm) 15" (400mm) Swing, Variable Speed Lathe
Clausing/Colchester 13" (320mm) 15" (400mm) Swing, Variable Speed Lathe Standard Features... State-of-the-art AC Spindle Drive features surface mount technology to give compact size and high reliability
More information