MITCO 12.7mm REDUCED SHANKS 1 MITCO MORSE TAPER SHANKS (NO 1 & 2) MITCO SINGLE ENDED STUBS 2 MITCO DOUBLE ENDED STUBS 2 MASONRY SDS DRILLS 4
|
|
- Bruno Waters
- 5 years ago
- Views:
Transcription
1
2 INDEX MITCO Page No MITCO JOBBER DRILLS BULK 1 CARDED 1 MITCO 12.7mm REDUCED SHANKS 1 MITCO MORSE TAPER SHANKS (NO 1 & 2) 2 MITCO SINGLE ENDED STUBS 2 MITCO DOUBLE ENDED STUBS 2 MASONRY DIY BULK 3 CARDED 3 LONG SERIES 3 MASONRY SDS DRILLS 4 DRILL SETS 4 STEEL DIY DRILLS BULK 5 CARDED 5 TRUBOR REDUCED SHANKS 8mm REDUCED SHANKS mm REDUCED SHANKS 5 AUGERS 6 WOOD DRILLS WOOD BRAD POINT 6 WOOD PROF SPADE BIT 6 DRILL STAND CONCEPTS 7 SPEEDS AND FEEDS FOR DRILLING 8 ADJUSTABLE WRENCHES 9 BOLT CUTTERS 9 HACKSAW FRAME 9 PUNCHES 10 PUNCH SETS 10 SCREWDRIVERS MECHANICS 11 ELECTRICIANS 11 PHILLIPS 11 SCREWDRIVER SET 11 VICES ALL STEEL BENCH VICE 12 ENGINEERS VICE 12 CONDITIONS OF SALE & TRADE ENQUIRIES 13 PRICES EXCLUSIVE OF VAT
3 MITCO JOBBER DRILLS Mitco Jobber Drill 118 degrees point angle fully ground drill mad of 9341 material to DIN 338 specifications for drilling into all steel. Packaging: Tube of 10 drills up to 13mm (Single pack for 13.5mm and larger) Packaging: Carded 2 per card up to 3mm and 1 per card 3.5mm and larger C C C C C C C C C C C C C C C C C C C C C C C C C C 7.00 Mitco 12.7mm Reduced Shank Drill 118 degrees point angle fully ground drill mad of 9341 material to DIN 338 specifications for drilling into all steel. Packaging: Single tube Pg 1
4 MITCO JOBBER DRILLS cont Mitco Morse Taper Shank Drill (No 1 & 2) 118 degrees point angle fully ground drill mad of 9341 material to DIN 338 specifications for drilling into all steel. Packaging: Single tube Single Ended Stubs 118 degrees point angle fully ground drill mad of 9341 material to DIN 338 specifications for drilling into all steel. Packaging: Single tube Double Ended Stubs 118 degrees point angle fully ground drill mad of 9341 material to DIN 338 specifications for drilling into all steel. Packaging: Single tube Pg 2
5 MASONRY DRILLS DIY Masonry (Standard Length) Made from carbon steel nickel plated with carbide tip for drilling into brick and concrete. Packaging: Bulk packed 10 per tube x x x x x x x x x x x x x x x x x x x x x 150 Packaging: 1 per card / tube C 3.0 x C 6.0 x C 9.5 x C 14.0 x 150 tube C 3.5 x C 6.5 x C 10.0 x C 15.0 x 150 tube C 4.0 x C 7.0 x C 11.0 x C 16.0 x 150 tube C 4.5 x C 8.0 x C 12.0 x C 18.0 x 160 tube C 5.0 x C 8.5 x C 13.0 x C 20.0 x 160 tube C 5.5 x C 9.0 x 120 DIY Masonry (Long Series) Made from carbon steel nickel plated with carbide tip for drilling into brick and concrete. Packaging: 1 per tube C 6.0 x C 9.5 x C 13.0 x C 16.0 x C 8.0 x 330 Pg 3
6 MASONRY SDS+ DRILLS Masonry SDS+ Drills Made from carbon steel nickel plated with carbide tip for drilling into brick and concrete. Packaging: 1 per tube C 5.0 x C 8.0 x C 10 x C 14 x C 6.0 x C 8.0 x C 12 x C 16 x C 6.0 x 260 DRILL SETS CODE SET CONTENTS CODE SET CONTENTS PCE PLASTIC BOX MITCO DRILL SET ( mm by 0.5mm) P 25 PCE PLASTIC BOX TM25 STEEL DIY ( mm by 0.5mm) B 10 PCE PLASTIC BOX MITCO DRILL SET (1.0mm mm) B 10 PCE PLASTIC BOX STEEL DIY (1.0mm mm) B 9 PCE PLASTIC BOX MASONRY DIY (3 / 4 / 5 / 5.5 / 6 / 6.5 / 7 / 8 / 10mm) PCE PLASTIC BOX COMBINATION SET (STEEL DIY 3/4/4.8/5/6 & MASONRY DIY 5/6/7/8) B 10 PCE PLASTIC BOX STEEL INDUSTRIAL COBALT (1.0mm mm) Pg 4
7 STEEL DIY DRILLS DIY Steel Drills 118 degrees point angle roll forged drill made of 4241 material to DIN 338 specification designed to use on mild steel, aluminium and brass. Packaging: Bulk packed 10 per tube Packaging: Carded 2 per card up to 3mm and 1 per card 3.5mm and larger C C C C C C C C C C C C C C C C C C C C C C C C Trubor Reduced Shanks 118 degrees point angle roll forged drill made of 4241 material to DIN 338 specification designed to use on mild steel, aluminium and brass. Packaging: Bulk packed 10 per tube Packaging: 1 per tube 8mm Reduced Shank 12.7mm Reduced Shank Pg 5
8 AUGERS Machine Augers 45 Carbon steel hex shank for drilling into wood using a machine. Packaging: Bulk packed 5 per box Hand Augers 45 Carbon steel hex shank, hand held drill for drilling into wood. Packaging: Bulk packed 5 per box WOOD DRILLS DIY Wood Brad Point Drills 3 Point roll forged drill for rapid penetration in hard woods and particle boards. Packaging: 1 per card C C C C C C C Professional Wood Flat Spade 3 Point carbon steel spade style bit with ground point for clean hole finish in all types of wood. Packaging: 1 per card C C C C C C C C C C Pg 6
9 DRILL STAND CONCEPTS DRILL STAND CONCEPT OPTION 1 (357 Pieces) DRILL STAND CONCEPT OPTION 1 (324 Pieces) M10 TRUBOR DRILL STAND (350 Pieces) M10 MITCO DRILL STAND (350 Pieces) M10 TRUBOR DRILL STAND (350 Pieces) Pg 7
10 SPEEDS & FEEDS FOR DRILLING Work Material Stainless Steel Tool Steel Cast Iron Malleable Iron Medium Carbon Steel Free Cutting Steel Alum. Brass Wood Plastic Cutting Speed: Metres per minute Drill Diameter Cutting Speed: Feet per minute (mm) (inch) Spindle Speed RPM 1.5 1/ / / / / / / / / / / / Recommended Feeds for Various Drill Diameters Diameter of Drill Feed per Revolution (mm) (inch) (mm) (inch) Note: The information on this page is intended as a general guide only. Figures will vary with grades of material used. 3 1/ / / > 25 > It is best to start with a moderate speed and feed, increasing either one, or both, after observing the cutting action and condition of the drill bit. POINT GRINDING OF TWIST DRILLS A large percentage of drill failures can be directly attributed to improper point grinding. It is most important therefore that great care be exercised when re-grinding drill points. The following diagrams illustrate proper grinding. This drill is properly ground. Lip angles and lengths are equal, resulting in a central chisel. The chisel angle and lip relief are correct. Pg 8
11 ADJUSTABLE WRENCHES BOLT CUTTERS HACKSAW FRAME Code Packaging Code K Each Packaging Pack of 12 Pg 9
12 PUNCHES PIN PUNCHES CENTRE PUNCHES Size (mm) Bulk Code Carded Code Size Bulk Code Carded Code 3 x K 3 x K 4 x K 5 x K 5 x K 6 x K 6 x K 8 x K 10 x K DRIVE PUNCHES ROOFING PUNCHES Size (mm) Bulk Code Carded Code Size (mm) Bulk Code Carded Code 3 x K 6 x K 5 x K 8 x K PUNCH & CHISEL SETS PIN PUNCH SET NO 1 CHISEL & PUNCH SET NO 2 Code K Code Contents 7 PIECE 2, 3, 4, 5, 6, 8 & 10MM PIN PUNCHES Contents 6 PIECE COLD CHISEL 1 EACH 150X16; 150X13; 150X10; 100X7MM PIN PUNCH: 1X3MM CENTRE PUNCH: 1X5MM CHISEL & PUNCH SET NO 3 CHISEL & PUNCH SET NO 4 Code Code Contents 12 PIECE COLD CHISEL: 1 EACH 175X16; 150X13; 150X10; 100X7MM PIN PUNCHES 3, 4, 5 6MM CENTRE PUNCHES 3 & 6MM DRIVE PUNCHES 3 & 5MM Contents 5 PIECE COLD CHISEL: 1 EACH 150X10; 150X16MM PIN PUNCHES 4 & 6MM CENTRE PUNCHES 6MM Pg 10
13 SCREWDRIVERS Mechanics Screwdriver Packaging: 1 per card K 5.0 x K 6.5 x K 8.0 x K 10.0 x K 6.5 x K 8.0 x K 10.0 x K 12.0 x K 6.5 x 150 Electricians Screwdriver Packaging: 1 per card K 2.5 x K 3.0 x K 4.5 x K 6.0 x K 3.0 x K 4.5 x K 4.5 x K 6.0 x 200 Philips Screwdriver Packaging: 1 per card K No 0 x K No 2 x K No 2 x K No 3 x K No 1 x K No 2 x 100 SCREWDRIVER SET Code Contents K 6 PIECE Mechanics 6.5 x x 150 Philips No 1 x 75 No 2 x 100 Electricians 3.0 x x 100 Pg 11
14 VICES All Steel Bench Vice Code Size (mm) Engineering Vice Code Size (mm) Spares available for All Steel and Engineering Vices Pg 12
15 CONDITIONS OF SALE Payment Terms Strictly 30 days. A 2,5% settlement discount will be allowed on payments received before the end of the month following the date of statement. Delivery Prices are delivered throughout SA subject to a minimum order value / quantity. Any special delivery instructions will be for the customer's account. Shortages and Claims Any claim for goods short delivered must be made in writing within 10 days from receipt of goods. Otherwise the claim will not be entertained. Claims for goods short delivered by outside contractors other than the contractor appointed by Mitco must be claimed from such contractor. Returns No goods will be accepted for credit exchange unless prior arrangements for the return have been made with the sales office. The transport costs of any goods returned by the buyer will be for his account and a handling fee of 10 % of the Net Invoiced Value. Guarantee All products are fully guaranteed against faulty material and workmanship. Faulty products will be replaced free of charge providing they have been used solely for their recommended purpose. TRADE ENQUIRIES CONTACT NUMBERS CODE TELEPHONE FAX BRITS / 1 / Pg 13
TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
More informationDrills - Metal - Wood - Masonry - Glass & Tile DRILLS
Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Specialty Materials 8 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationDrills - Metal - Wood - Masonry - Glass & Tile DRILLS
Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Glass & Tile 10 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel Hard
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationFax Web Phone APX150 Milling Machine Power Feed X Traverse 150Lbs Torque
90V Premium CNC Milling Machine Vise "x8.9" APX0 Milling Machine Power Feed X Traverse 0Lbs Torque ~7 P0 0-099 $0.00 90º Square Shoulder Indexable Coolant Thru Face Mills * Insert Not Included APKT PDER
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationCOMBO KITS FLASHLIGHTS & CHARGERS M12 2-Tool Combo Kit. M12 2-Tool Combo Kit. M12 4-Tool Combo Kit
COMBO KITS 2490-22 M12 2-Tool Combo Kit 12 V Screwdriver (2401-20) Hackzall Recip Saw (2420-20) 30 minutes 2491-22 M12 2-Tool Combo Kit 12 V 1/4 Hex Impact Driver (2450-20) Hackzall Recip Saw (2420-20)
More informationMasonry Drill Bits
www.irwin.com Masonry Drill Bits Powers Through Rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products available, IRWIN
More informationPRODUCT LINE CATALOG THU DERTAP. Chisholm, MN USA. A Division of Minnesota Twist Drill.
PRODUCT LINE CATALOG A Division of Minnesota Twist Drill Chisholm, MN USA THU DERTAP Style Page # Style Page # Style Page # Style Page # 2 Style Page # Style Page # Style Page # Style Page # T13CX T1813
More informationConcrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.
» CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for
More informationTrade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
More informationProduct Information Report Maximizing Drill Bit Performance
Overview Drills perform three functions when making a hole: Forming the chip The drill point digs into the material and pushes up a piece of it. Cutting the chip The cutting lips take the formed chip away
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationMasonry & Specialty Drilling
Masonry & Specialty Drilling www.irwin.com SDS-Plus POWERS THROUGH REBAR With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products
More informationThe shape of the cone of the twist drills
The shape of the cone of the twist drills With reference to figure N 1 we can give the following definitions: Fig. N 1- Some characteristic angles of twist drill ε : Helix angle; it is formed by the tangent
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationCatalog Drilling & Tapping Consumables
Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users
More informationMetal Drilling.
101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut
More informationMasonry & Specialty Drilling
www.irwin.com Masonry & Specialty Drilling SDS-Plus SPEEDHAMMER POWER FEATURES Powers Through rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development,
More information37567 HWY 109, WINNEBAGO, MN HI-PERFORMANCE SPLIT-TIP (SELF-PILOTING) MONEY BACK GUARANTEE
Winters DRILL BIT CITY 37567 HWY 109, WINNEBAGO, MN 56098 ORDER DESK 1-800-950-3938 INFO EMAIL: max@wintersdrillbitcity.com WEBSITE: www.wintersdrillbitcity.com FARMERS AND MECHANICS CHOICE WE SOLVE DRILLING
More informationMACHINERY & WORKSHOP EQUIPMENT
MACHINERY & WORKSHOP EQUIPMENT drills - core DRILLS - Magnetic Base High Speed Steel Annular Cutters Made from the highest grade M2 steel Manufactured to exceed AISI / ASTM standards Fully ground with
More informationPOWER TOOL ACCESSORIES PROMOTION
POWER TOOL ACCESSORIES PROMOTION BUY $100 in Accessories Any Mix & GET a $2 DRIVEKORE Gift Card GET a $2 DRIVEKORE Gift Card Offer available on all in stock accessories and any special order accessories.
More informationMAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS
MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS Triple Edge Cutting Features: The CT series features two sets of three cutting tips each with different geometries, balancing and cutting forces. This enables
More informationMag_Catalog Final 11/3/10 11:16 AM Page 1
Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 1 Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 3 C O N T E N T S DRILLBITS AUGER BITS: Nailbomber Moly Coated / Ship Head Heavy Duty (357DLX, 303DLX)....................4
More informationPUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES
PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES PUNK- HIGH PERFORMANCE POWER TOOL ACCESSORIES. DESIGNED FOR THE SERIOUS PROFESSIONAL. Demand more from your power tool accessories. QUALITY Super durable
More informationPRODUCT CATALOG. Chisholm, MN USA
PRODUCT CATALOG Chisholm, MN USA 800-942-1501 TABLE OF CONTENTS Series Description Page # 800...General Purpose, 118 Point, Jobber Length, Wire, Black Oxide, HSS...4 801...General Purpose, 118 Point, Jobber
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationTwist Drills for Woodworkers. Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm
Twist Drills for Woodworkers Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm Twist Drills for Woodworking Topics that will be covered: Coatings Steel Types Drill Points Drill
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationJunior / mini hacksaw frames Hacksaw frame Junior Simple steel frame complete with saw blade for steel.
Hacksaw frames & tiny hacksaw frames Hacksaw blades Handsaws, backsaws Lignum & Bahco Hole saws Bahco & Morse Wood chisel Bahco Wood chisels Rotec Water sharpening stone Junior / mini hacksaw frames 260101
More informationHSS Specialists. Special design high speed steel drills for special machining tasks
HSS Specialists Special design high speed steel drills for special machining tasks Guhring s HSS Guhring has been a specialist in drilling tools for more than a century. This not only applies to the broad
More informationAircraft Quality Reamers and Special Tooling
C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationDrill Bits, Augers, Taps & Dies
OUTLETS NATIONWIDE 6 Solutions for just about any drilling application. From the toughest steel to concrete, granite, glass and wood. We also stock the widest range of taps and dies and related accessories
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationVEX-S. Combination Drill with Front & Back Chamfering of Through Holes. tip combined with patented SNAP. chip control.
Combination Drill with Front & Back Chamfering of Through Holes tip combined with patented SNAP chip control blade replacement Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 HEULE is setting new
More informationSTUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department
Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationTUBE AND SHEET DRILLS
TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More information191 GENERAL METAL WORK
191 GENERAL METAL WORK Examination Structure There will be two papers: 191-1 PAPER I : This will consists of two sections, viz: SECTION A: OBJECTIVE: This will be forty (40) multiple choice questions.
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationPOWER TOOL ACCESSORY GUIDE
POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN
More informationADVANCE TYPES OF DRILL BIT - A REVIEW
ADVANCE TYPES OF DRILL BIT - A REVIEW Chandresh P. Rana 1,Pankaj D Pandey2,Akshar Y Parmar 3,Pradipsinh A Parmar 4 1 Asst. Professor, Mechanical Engineering Department, Vadodara Institute of Engineering,
More informationCutting Tools & Abrasives
Cutting Tools & Abrasives Page Abrasives... 3861 Holesaws... 3858 Countersinks & Deburring Tools... 3856 Jigsaw Blades... 38 Cutting Discs... 3860 Polishing Kits... 3860 Deburring... 3862 Reamers... 3855
More informationFast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
More informationProtective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16
Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.
More information16 Piece Twister Drilling Set.
16 Piece Twister Drilling Set. TECHNICAL REFERENCE GUIDE Drill. With Impact. Not all ¼ shank accessories can withstand the higher torque produced by an impact driver. Our 16 Piece Twister Drilling Set
More informationCarbide Tipped Hole Cutters
Carbide Tipped Hole Cutters The solution for drilling holes in sheet metal up to /8 thick Deliver more holes per charge in battery-powered drills Cut thin materials, including stainless steel, quickly
More informationCold Saw Blade Basics
Cold Saw Blade Basics 01/2018 Scotchman Industries Inc. 180 US-14 Philip, SD 57567 USA Phone 800.843.8844 - Fax 800.843.2499 www.scotchman.com info@scotchman.com THE COLD SAW BLADE MATERIAL Most Cold Saw
More informationMetal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
More informationALUMINUM HEADKNOCKER RACK P/N HKRS4-1 / HKRS5-1
ALUMINUM HEADKNOCKER RACK P/N HKRS4-1 / HKRS5-1 Package Contents: PARTS (1) CROSS BAR (2) LEGS WITH FEET (2) T BRACKETS (1) SCREEN ASSEMBLY (2) SCREEN L MOUNTS (2) LOWER SCREEN MOUNTS (2) LOAD SECURE POSTS
More informationTrade of Metal Fabrication. Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2
Trade of Metal Fabrication Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 1
More informationFigure N 1- Characteristic angles of a drill
Basic of drill In these technical descriptions for simplicity we use the term drill instead of the more complete name twist drill bits. The drill is the tool universally used to make holes in any material.
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More information50 Pennsylvania Avenue Warwick, Rhode Island Heavy-Duty Reciprocating Blades Designed Especially for Higher Amp Machines
50 Pennsylvania Avenue Warwick, Rhode Island 02888 147 Anchors Heavy-Duty Reciprocating Blades Designed Especially for Higher Amp Machines Fire and Rescue specialists can t take chances with the blades
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationLANDMARK UNIVERSITY, OMU-ARAN
LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: DRILLING. COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MECHANICAL ENGINEERING ENGR. ALIYU, S.J Course code: MCE
More informationIC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly
IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following
More informationPRORAC CONTRACTOR SERIES UNIVERSIAL STEEL TRUCK / CAP RACK INSTALLATION INSTRUCTIONS
PRORAC CONTRACTOR SERIES UNIVERSIAL STEEL TRUCK / CAP RACK INSTALLATION INSTRUCTIONS 1000 Lb. Capacity Bed Mount 750 Lb. Capacity Cap Mount Package Contents: Parts Hardware (4) Legs (12) 3/8-16 x 1-1/4
More informationConcrete drills 324 PRECISION TOOLS
BETONBOHRER CONCRETE FORETS BETONBOREN PUNTE BROCAS VRTÁKY WIERTŁA СВЁРЛА BURGHIE UDARNI SVRDLA BETONFÚRÓK BETONO PER MATKAP SVEDRI À ZA ПО PARA GRĄŽTAI DO PENTRU BÉTON DRILLS MURO БЕТОНУ BETONU HORMIGÓN
More informationInnovative Cutting Tool Solutions. Product Line Card
Innovative Cutting Tool Solutions Product Line Card www.championcuttingtool.com Product Lines Cutting Tool Solutions Jobber XL5 Heavy Duty Sizes - 1/16 to 1/2, Letters & Numbers Stainless steel & tough
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More information[DOC] WHAT KIND OF DRILL BIT FOR METAL
14 January, 2018 [DOC] WHAT KIND OF DRILL BIT FOR METAL Document Filetype: PDF 283.94 KB 0 [DOC] WHAT KIND OF DRILL BIT FOR METAL I'm not sure what type of bolt it is since I. With metal studs gaining
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationGrizzly Drill Press SOP
Grizzly Drill Press SOP Drill Press is wired to run on 0V. Drill Press has a built in light with a ON/OFF switch. Never hold a workpiece by hand while drilling. Clamp it down or hold it in a vice. Never
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationPrice List Innovative Cutting Tool Solutions
Price List 2015 2015 1897 Innovative Cutting Tool Solutions NEW PRODUCTS! SMC Sheet Metal Cutters Page 28 CT150STK/CT200STK Stack Cut Annular Cutters Page 35 Your Productivity Partner Champion has been
More informationOne Revolution Tube Cutter
One Revolution Tube Cutter Series 9060 Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com Table Of Contents Introduction...
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationDrive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33
Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:
More informationMETRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
More informationAkron (800) Bentleyville (800) Erie (800) Meadville (800) Warren (800) Youngstown (800)
Stock and Pricing as of DECEMBER 1st - Applies to Current Stock Available* Circular Saw Blade 3-Pc. Step Drill Set 7-1/4 Carbon Tipped Precision honed C3 carbide tips; 40 TPI Heat/vent expansion slot design
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationchisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels
107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING
More informationCOFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
More informationHAMMER chisels & breaker steels
83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC
More informationUnit Drawback when cenvat facilities has not been availed Drawback Rate
Chapter No 82: Tools, Implements, Cutlery, Spoons and Forks, of Base Metal; Parts thereof of Base Metal Chapter Description of Goods Unit Drawback when cenvat facilities has not been availed Drawback Rate
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationGet a $25 DriveKore Gift Card with Your Purchase!
Drill Bit Promo Get a $25 DriveKore Gift Card with Your Purchase! DRILL BIT PROMOTION BUY $100 in DRILL BITS & GET a $25 DriveKore Gift Card Offer valid on all stocked drill bits & sets: Offer valid through
More informationTerms of reference. Set up training lab in the different location as per distribution centre list.
Terms of reference Request for Quotation for the supply of Machines & Tools (equipment) to deliver NTVQ Training Program on Carpentry Lacquer Polish and Upholstery The Bangladesh Skills for Employment
More informationMasonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets
Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216
More informationPunch Type Clamps. 116 Clamp guards provide a smooth ID when applied to Punch-Lok center punch hose clamps. PUNCH-LOK SPECIAL ORDER NON-STOCK CLAMPS
Hose Scribe Punch Type Clamps Hose Scribe 114 HOSESCRIBE Hose Identification System The First Self-Contained,Computerized Hose Identification Tag engraving System Three Easy Steps 1. Insert one of three
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationNEVADA ASSEMBLY INSTRUCTIONS
NEVADA ASSEMBLY INSTRUCTIONS BASE SIZE: 2.700m x 1.500m NEVADA Tools Required: Battery Drill Riveter Hammer Tape Measure Ladder Skillsaw Level Screwdriver - Flat 3/8 Hex Drive bit 8mm Hex Drive bit Drill
More informationName: Class: Teacher:..
Name: Class: Teacher:.. 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin, lead, gold and silver are all examples of PURE METALS which have been mined from the Earth
More information