FAIRWINDS. ODELL DINING SET - Assembly Instructions. Page 1/8. Estimated 40 mins. People needed for assembly

Transcription

1 OELL INING SET - ssembly Instructions People needed for assembly Estimated 40 mins FIRWINS Page 1/8 Product ssistance Line: if you require any advice about this product or require any missing fixings, Issue

2 OELL INING SET - ssembly Instructions COMPONENT CHECKLIST Bench Left Leg x 4 Bench Right Leg x 4 Upper Side Stretcher x Lower Side stretcher x 4 Bench seat x 2 Bench Stretcher x Table external leg x 2 Table internal leg x 2 Table pron x Table top x 1 Table Stretcher x 1 FITTINGS Ruler - Use this ruler to help correctly identify the screws M7x70mm Screw x 20pcs M6x40mm Screw x 6pcs M7x60mm Screw x 4pcs C FIRWINS E llen key x 2pcs M60mm Screw x 4pcs Wooden lock IMPORTNT: Read these instructions carefully before attempting to assemble. Retain these instructions for future reference. F x 2pcs Page 2/8 Product ssistance Line: if you require any advice about this product or require any missing fixings, PO: 3198

3 OELL INING SET - ssembly Instructions Step 1: Step 2: B FIRWINS Page 3/8 2/3 Product ssistance Line: if you require any advice about this product or require any missing fixings,

4 OELL INING SET - ssembly Instructions Step 3: B Step 4: C C 8 FIRWINS 7 Page 4/8 2/3 Product ssistance Line: if you require any advice about this product or require any missing fixings,

5 OELL INING SET - ssembly Instructions Step 5: 9 9 Step 6: countersink hole 10 FIRWINS 6.1 ttach the Table Stretcher (11) to the both X Leg (7,8) 6.2 ttach both X leg (7,8) to the apron (9) Page 5/8 2/3 Product ssistance Line: if you require any advice about this product or require any missing fixings,

6 OELL INING SET - ssembly Instructions Step 7: F Step 8: FIRWINS Page 6/8 2/3 Product ssistance Line: if you require any advice about this product or require any missing fixings,

7 OELL INING SET - ssembly Instructions For your safety and information please read the following: IMPORTNT! PLESE RETIN FOR FUTURE REFERENCE : RE CREFULLY Health and safety Keep all packaging and small parts away from children. Ensure that children do not place all packaging over their heads or swallow any small parts. There is a risk suffocation. t least 2 people are required to assemble this product. ssemble on a soft level surface to avoid damaging the unit or your floor. This product should not be used if any parts are missing or broken. ll fixings should be checked and tightened before use and periodically tightened. o not strike with a sharp implement. lways use on a level and even suface. The Odell ining Set is intended exclusively for private outdoor use and it not suitable for commercial use. o not stand on the table and the bench. How do I care for the product In order to have long lasting joy with the product, please follow the care instructions below: Wooden surfaces: Utensils: - Regular Wood Cleaner, Sand Paper, Weather Resistant Wood Preservation Oil (not included) Note: Before cleaning any wooden part, please apply the cleaner on the less visible part of the furniture to ensure the cleaning agent is not harmful to the product. Step 1: - Clean the furniture thoroughly by using a regular WOO CLENER to remove any stain or dirt. - Sand the surface by using sandpaper if needed Before applying Wood Preservation Oil or Weather Resistant Wood Lacquer the surface must be: FIRWINS ry, Clean and Free from dust and greases. Step 2: pplication of Wood Preservation Oil or Weather Resistant Wood Lacquer - Shake well before use Page 7/8 Product ssistance Line: if you require any advice about this product or require any missing fixings,

8 OELL INING SET - ssembly Instructions - For first time application, apply the oil using a clean cloth; wipe the surface 2-3 times - For subsequent maintenance: apply the oil 3-4 times annually. - Use a cloth to remove all excess oil - fter oil application, let the furniture dry at least 48 hours before use. Wicker surfaces: - Please clean the wicker regularly using a damp cloth. - o not use any abrasive materials when cleaning. Important customer notice lways lift the furniture when moving it around. Never drag. From time to time check that there are no loose bolts or screws on this unit. o not expose the unit to harsh weather conditions. It is recommended to cover the product if not in use to protect the surfaces against dirt and rain. Please ensure all parts are included before assembly. This does not affect your statutory Frights. S Once assembled this item is exempt from home approval and cannot be returned. Keep the original purchase receipt with this instruction for future reference. Please quote the right model no. in page 2 if you require any assistant from our customer support team. This product is complied to European Standard EN 581-1: 2006, EN 581-2: 2015, EN 1022: 2005, EN 581-3: 2007 Max. Weight Capacity: Bench 200kg (the maximum load is a total load and not one person singly). Maximum user weight PER SET: 100kg, Table 75kg. FIRWINS Page 8/8 Product ssistance Line: if you require any advice about this product or require any missing fixings,