power tools drill sets & unscrew-ums Combination Countersink and Taper Point Drill Sets

Transcription

1 power tools drill sets & unscrew-ums Fuller Set #6 Fuller Set #8 Fuller Set #9 Fuller Set #10 Fuller Set #11 100% Made in the USA Combination Countersink and Taper Point Drill Sets Set #6 -- Personal Set Set of five countersinks with matching taper point drill bits for screw sizes #4, 5, 6, 8 and 10. All have a 3/8" cutting diameter. Also includes one 3/8" stop collar, one 3/8" wood plug cutter and one hex key in a protective cardboard box with foam insert. This is a very economical set to handle a nice simple range of countersinks. Set #8 -- Deluxe Set Contains five type- C countersinks for wood screw sizes, 6, 8, 10, 12, and 14, with 3/8" and 1/2" cutting diameters. Five matching taper point drills, 3/8" and 1/2" stop collars, 3/8" and 1/2" plug cutters and two hex keys are all included in an attractive mahogany case. Set #10 -- Quick Change Set with Plug Cutter The #10 set contains everything you need to pre-drill and plug for screw sizes 5, 6, 7, 8 and 9. All tools have 1/4 Quick Change Hex Shanks. Set has five 3/8 Quick Change Taper Point drills with matching countersinks, 3/8 Stop Collar, 3/8 Quick Change Plug Cutter, Quick Change Chuck Adapter, and 2 Hex Keys all in a mahogany case. Set #11 -- Quick Change Set with Plug Cutters The #11 set contains everything you need to pre-drill and plug for screw sizes 6, 8, 10, 12, and 14--all with 1/4 Quick Change hex shanks. Set has five Quick Change Taper Point drills with matching countersinks, 3/8 and 1/2 Stop Collars, 3/8 and 1/2 Quick Change Plug Cutters, Quick Change Chuck Adapter, and 2 Hex Keys all in a mahogany case. Set #9 -- Quick Change Set Contains five type- C countersinks mounted on Hex Shank taper point drills with Quick change chuck adapter. Countersinks are for wood screw sizes, 6, 8, 10, 12, and 14, with 3/8" and 1/2" cutting diameters. Also included are 3/8 and 1/2 Stop Collars, two hex keys to fit countersink screws all in an attractive mahogany case. Set #6 FUL $59.71 #8 FUL $79.52 #9 FUL $84.46 #10 FUL $88.08 #11 FUL $ Wood Plug Cutters Designed for clean cutting and hardened for long life. Four bladed plug cutters do not eject plugs; they remain on the board and can be broken out with a screwdriver or sawed free. Plug Plug Shank Dia Length Dia 1/4" 3/8" 1/4" FUL $8.66 5/16" 3/8" 1/4" FUL $ /8" 1/2" 1/4" FUL $ /8" 1/2" 3/8" FUL $ /16" 1/2" 1/4" FUL $ /16" 1/2" 3/8" FUL $ /2" 1/2" 1/4" FUL $ /2" 1/2" 3/8" FUL $ /16" 9/16" 1/4" FUL $ /16" 9/16" 3/8" FUL $ /8" 5/8" 1/4" FUL $ /8" 5/8" 3/8" FUL $ /4" 3/4" 1/2" FUL $ /8" 3/4" 1/2" FUL $ " 3/4" 1/2" FUL $ /8" 3/4" 1/2" FUL $ /4" 3/4" 1/2" FUL $ /8" 3/4" 1/2" FUL $ /2" 3/4" 1/2" FUL $68.20 Hardwood Plug Cutters available at UnScrew-Ums UnScrew-Ums are designed to back out broken screws and remove other fasteners with minimal damage to the surrounding wood. These work great! All are 2 in length (longer sizes available call for details.) Choosing the proper size: You have to remove the screw head if its still there. Knowing the wire size of your screw--refer to the Shank column if there is still a shank to grab. If all you have is thread-- refer to Thread column sizes. Shank Thread OD #4 #6* 1/8" FUL-SXTR0125 $11.22 #6 #8* 5/32" FUL-SXTR0156 $11.73 #8 #10* 3/16" FUL-SXTR0187 $11.22 #10 #12* 7/32" FUL-SXTR0218 $11.22 #12-14 #14-18* 1/4" FUL-SXTR0250 $11.22 #14-18 #16-20* 5/16" FUL-SXTR0312 $11.22 *For hardened screws of these wire sizes, use an unscrew-um which has a 1/16 larger o.d. than what is called for. Unscrew-Ums Screw Extractor Set Handles the most common screw sizes: 5/32, 3/16, 7/32, 1/4 and 5/16 OD FUL-SXTR0001 $ Call to Order

2 fuller countersinks Countersinks Type C Type H Cuts Drill Size Item# Item# 1/4" 5/64" FUL-C2 $6.88 3/32" FUL-C3 $6.88 FUL-H3S $ /16" 7/64" FUL-C4 $6.88 FUL-H4S $ /8" FUL-C44 $6.88 9/64" FUL-C65 $6.88 5/32" FUL-C410 $ /64" FUL-C411 $6.88 3/16" FUL-C43 $6.88 3/8" 3/32" FUL-C56 $6.88 7/64" FUL-C57 $6.88 1/8" FUL-C5 $6.22 FUL-H5S $ /64" FUL-C6 $6.66 FUL-H6S $ /32" FUL-C7 $6.22 FUL-H7S $ /64" FUL-C8 $6.22 FUL-H8S $ /16" FUL-C9 $6.22 FUL-H9S $ /64" FUL-C913 $6.22 7/32" FUL-C97 $6.22 7/16" 5/32" FUL-C105 $ /64" FUL-C1011 $6.88 3/16" FUL-C103 $ /64" FUL-C10 $6.88 FUL-H10S $ /32" FUL-C1014 $6.88 1/4" FUL-C104 $6.88 1/2" 1/8" FUL-C122 $6.88 9/64" FUL-C129 $6.88 5/32" FUL-C125 $6.88 FUL-H125S $ /64" FUL-C1211 $6.88 3/16" FUL-C92 $6.88 FUL-H92S $ /64" FUL-C102 $6.88 FUL-H102S $ /32" FUL-C12 $6.88 FUL-H12S $ /64" FUL-C1415 $6.88 1/4" FUL-C14 $6.88 FUL-H14SW $ /8" 5/32" FUL-C145 $9.21 3/16" FUL-C143 $9.21 FUL-H143S $ /32" FUL-C167 $9.21 1/4" FUL-C16 $9.21 FUL-H16S $ /64" FUL-C1617 $9.21 9/32" FUL-C169 $9.21 FUL-H169S $ /64" FUL-C1619 $9.21 5/16" FUL-C18 $9.21 FUL-H18SW $ /4" 3/16" FUL-C243 $ /32" FUL-C247 $ /4" FUL-C244 $12.15 FUL-H244S $ /16" FUL-C245 $12.15 FUL-H245S $ /64" FUL-C20 $ /8" FUL-C24 $12.15 FUL-H24S $ /8" 1/4" FUL-C284 $ /16" FUL-C285 $15.54 FUL-H285S $ /8" FUL-C286 $15.54 FUL-H286S $ /16" FUL-C287 $15.54 FUL-H287S $ " 1/4" FUL-C324 $ /8" FUL-C326 $ /2" FUL-C328 $18.37 FUL-H328S $29.58 Type C Type H power tools Countersinks Type C - Used for heads of screws in woods, plastics and non-ferrous materials. Heat treated for long tool life. Type H - Short 4 bladed rugged construction for reducing breakage and designed to countersink in metals and hardwoods. Stop Collars These Fuller stop collars fit over countersinks and counterbores to control cutting depth. Stop collars are held in place with 2 set screws. Inside diameter is Countersink cutting diameter for precise cutting control. Size 1/4" FUL $4.41 5/16" FUL $4.52 3/8" FUL $4.83 7/16" FUL $4.90 1/2" FUL $4.99 9/16" FUL $4.95 5/8" FUL $4.65 3/4" FUL $4.80 7/8" FUL $4.95 1" FUL $ /8" FUL $ /4" FUL $ /8" FUL $ /2" FUL $4.99 Hex Keys for Countersinks Fits Fuller 3/16 set screws. Hex Key Wrenches are designed and used for adjusting hex set screws on countersinks, counterbores etc. Type Size Hex 3/32 FUL-K0093 $0.19 Splined 3/32 FUL-SPK0093 $1.92 JD s Decoder - Recommended Countersink Drill Size Chart Screw Appropriate Taper Drill Straight Drill Bung Size C-Sink Cut Hardwood Softwood Hardwood Softwood Diameter #2 1/4 3/32 5/64 1/16 1/16 1/4 #3 1/4 7/64 3/32 5/64 1/16 1/4 #4 1/4 7/64 3/32 5/64 1/16 1/4 #5 5/16 1/8 7/64 3/32 5/64 5/16 #6 5/16 9/64 1/8 7/64 3/32 5/16 #7 3/8 5/32 9/64 7/64 3/32 5/16 #8 3/8 11/64 5/32 1/8 7/64 3/8 #9 3/8 3/16 11/64 9/64 1/8 3/8 #10 7/16 13/64 3/16 9/64 1/8 7/16 #12 1/2 7/32 13/64 5/32 9/64 1/2 #14 1/2 1/4 15/64 11/64 5/32 1/2 #16 5/8 9/32 17/64 3/16 11/64 5/8 #18 5/8 5/16 19/64 7/32 13/64 5/8 #20 3/4 21/64 5/16 15/64 7/32 3/4 #24 7/8 3/8 3/8 17/64 1/4 7/8 100% Made in the USA Premium quality Countersinks and Drill Bits trusted since Call to Order

3 power tools Taper Point Drills Made of High Speed Steel to hold their sharp cutting edges longer. This is a General Purpose type Taper Point bit and is recommended for most jobs whether in a drill press or in handheld equipment. They cut well in both hard and softwoods. Made in standard fractional sizes to fit all types of countersinks and counterbores with sizes and lengths to match the most popular wood screws. Regular Length 2-5 Wood Screw Size 2 5/64" FUL $ /32" FUL $ /64" FUL $ /8" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /16" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /4" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /16" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /8" FUL $10.55 Long Length 4-7 Wood Screw Size 2 5/64" FUL $ /32" FUL $ /64" FUL $ /8" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /16" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /4" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /16" FUL $ /64" FUL $ /32" FUL $ /64" FUL $ /8" FUL $21.00 Extended Length 8 Wood Screw Size 16 9/32" FUL $23.52 High Speed Steel Drills All-purpose, bright finish, polished 118 point for fast chip removal. This general purpose drill can be used for drilling steel, wood or plastic. Size 1/64 RPD164 $2.97 1/32 RPD132 $2.56 3/64 RPD364 $2.40 1/16" RPD116 $1.84 5/64" RPD564 $1.84 3/32" RPD332 $1.96 7/64" RPD764 $1.96 1/8" RPD18 $2.12 9/64" RPD964 $2.36 5/32" RPD532 $ /64" RPD1164 $2.68 3/16" RPD316 $ /64" RPD1364 $3.12 7/32" RPD732 $ /64" RPD1564 $3.12 1/4" RPD14 $ /64" RPD1764 $3.58 9/32" RPD932 $ /64" RPD1964 $4.12 5/16" RPD516 $ /64" RPD2164 $ /32" RPD1132 $ /64" RPD2364 $5.76 3/8" RPD38 $ /64" RPD2564 $ /32" RPD1332 $6.78 7/16" RPD716 $ /32" RPD1532 $ /64" RPD3164 $ /2" RPD12 $9.81 Heavy Duty Split Point All-purpose bit for drilling cotter pin holes in bolts, steering knuckles, pins as well as cross holes in the heads of bolts. Heavy construction resists the severe strains this type of work puts on a drill. Size 1/16" HD116 $1.65 5/64" HD564 $1.65 3/32" HD332 $1.83 7/64" HD764 $1.83 1/8" HD18 $1.84 9/64" HD964 $1.87 5/32" HD532 $ /64" HD1164 $1.93 3/16" HD316 $ /64" HD1364 $2.48 7/32" HD732 $ /64" HD1564 $4.17 1/4" HD14 $ /64" HD1764 $3.83 9/32" HD932 $ /64" HD1964 $4.20 5/16" HD516 $ /64" HD2164 $ /32" HD1132 $5.41 3/8" HD38 $ /64" HD2564 $ /32" HD1332 $7.17 1/2" HD12 $10.47 drill bits Cobalt Drills Our highest quality for drilling stainless steel and other hard metals. Size 1/16 RPDC116 $1.79 5/64 RPDC564 $1.79 3/32 RPDC332 $1.79 7/64 RPDC764 $3.50 1/8 RPDC18 $3.57 9/64 RPDC964 $2.41 5/32 RPDC532 $ /64 RPDC1164 $2.71 3/16 RPDC316 $ /64 RPDC1364 $4.06 7/32 RPDC732 $ /64 RPDC1564 $4.60 1/4 RPDC14 $ /64 RPDC1764 $5.47 9/32 RPDC932 $ /64 RPDC1964 $8.69 5/16 RPDC516 $ /64 RPDC2164 $ /32 RPDC1132 $9.39 3/8 RPDC38 $ /64 RPDC2564 $ /32 RPDC1332 $ /64 RPDC2764 $ /16 RPDC716 $ /64 RPDC2964 $ /32 RPDC1532 $ /64 RPDC3164 $ /2 RPDC12 $ /32 RPDC1732 $ /32 RPDC2132 $59.50 Taper Point Hex Shank Drills Designed to pre drill for the threads and shank portion of standard wood screws. Taper Point with 1/4" Hex Power Groove Quick Release Shank. Drill Size For Screw 1/8" 5 FUL $5.20 9/64" 6 FUL $5.46 5/32" 7 FUL $ /64" 8 FUL $5.67 3/16" 9 FUL $ /64" 10 FUL $6.09 7/32" 12 FUL $6.41 1/4" 14 FUL $6.93 Vix Bits Vix Bits are self-centering Drill Guides. Vix bits let you mount hinges the easy, professional way! Drill Size Screw Size 5/64" #3-#4 FUL $ /64" #5-#6 FUL $8.82 9/64" #8-#10 FUL $ /64" #12 FUL $ /64" #14 FUL $ Call to Order

4 driver bits Driver Bits Use our best hex-shank Driver Bits in drill chucks or magnetic bit holders. We offer two types of domestic bits: Insert Bits are compact, economical, change over quickly and require less storage space. Power Shank Bits have a longer body along with an additional shank to fit deeply into the drill chuck for more traction and a better grip. Frearson Driver Bits Insert style only 1/4" Hex Shank. Point Screw 1-1/8" Insert pack DB000F1 $ pack DB000F2 $ " long power driver (2 pk) DB100F2 $4.71 Phillips Driver Bits 1/4" Hex Shank Ribs on the driver tip improves the grip and help prevent cam-out. Point Screw 1 Insert 1 6 (5pk) QTI-250PB1PK $ (5pk) QTI-250PB2PK $ (5pk) QTI-250PB3PK $ /16 Power Shank 1 6 (5pk) DB100P1 $ (5pk) DB100P2 $ (5pk) DB100P3 $ /4 Power Shank 1 6 (5pk) FUL $ (5pk) DB120P2 $ (5pk) DB120P3 $ /2 Power Shank 1 6 (2pk) DB130P1 $ (2pk) DB130P2 $ (2pk) DB130P3 $ Power Shanks 1 6 (2pk) DB160P1 $ (2pk) DB160P2 $ (2pk) DB160P3 $8.96 Frearson Made in USA Square Head Driver Bits Robertson, 1/4" Hex Shank. 5 per pack. (All stainless steel deck screws use point size 2). power tools Point Screw Pack (5) 1" Insert 0 4 DB000R0 $ QTI-250R1PK $ QTI-250R2PK $ QTI-250R30 $ /16" Power Shank 1 6 QTI-80-1R $ QTI-80-2R $ QTI-80-3R $7.20 Slotted Driver Bits 1/4" Hex Shank Note: #DB00014 is only available in 5/16 hex shank Square Recess Phillips Slotted Shank Type/Length Description Fits Screw Size Insert 1-1/2 4 Flat/Pan (5pk) 5/6 Round/Oval QTI-250SS4PK $ Flat/Pan (5pk) 8 Round/Oval QTI-250SS6PK $ Flat/Pan (5pk) 10 Round/Oval QTI-250SS8PK $ Flat/Pan (2pk) 12 Round/Oval DB00010 $ Flat/Pan (2pk) 14 Round/Oval DB00012 $3.15 ** 5/16 Hex Shank 14 Flat/Pan (2pk) 16 Round/Oval DB00014 $3.36 Power Shank 1-15/16 5 Flat/Pan (2pk) 6 Round/Oval DB10005 $ Flat/Pan (2pk) 12 Round/Oval DB10008 $3.24 Power Shank 2-3/4 10 Flat/Pan (2 pk) 12 Round/Oval FUL $ Flat/Pan (2 pk) 14 Round/Oval DB12012 $5.65 Hex Auger Driver 1/4 with an auger type shaft that can be secured in an ordinary brace allowing it to use any 1/4 hex driver bit. The nickel-plated steel hex socket features a magnet to hold driver bits in place. HAD14 $17.00 Go Stainless! Stainless Steel Phillips Driver Bits Phillips driver bits fit power drills for rapidly driving phillips head screws. Vacuum ice-hardened Stainless Steel driver construction prevents extraneous rust. Drive: 1/4 -hexagon. When a ferrous tool is used with a stainless steel fastener, the pressure exerted leaves behind microscopic traces of carbon steel. These can oxidize and cause extraneous rust. The ugly rust that you see dripping out of stainless steel fasteners can be prevented! It s not a fastener problem - it s a tool problem. For more Stainless Steel Driver bits go to Length Description Each Short PH 1 WER $3.60 Short PH 2 WER $3.60 Short PH 3 WER $3.60 Long 3.5 PH 1 WER $9.33 Long 3.5 PH 2 WER $9.33 Long 3.5 PH 3 WER $9.33 Call to Order

5 power tools See page 6 for Festool abrasives & Festool sanding pads. Features Weight (lbs) Connec. Size (in) Sanding Stroke (in) Speed Eccentric (OPM) Watts Amps Speed Rotary (RPM) Product Pad Size FES Dia N/A 5/64 1-1/ Circular pad, small, lightweight, and handy for single-handed operation and continuous work on vertical and horizontal surfaces. Includes: StickFix (H&L) sanding pad (5, soft, ), 1 abrasive sheet, Filter cartridge (489129), Plug it Optimum dust extraction through patented Jetstream principle detachable power cord, In Systainer 2 (445434) Turbo dust extraction Sanding pad brake prevents scratches Stepless electronic speed control for various uses Festool ETS 125 EQ Random Orbit Sander 5 $ Edge protection prevents damage to workpiece Optimum dust extraction through patented Jetstream principle (air flowing out through an additional hole in the center of the sanding pad) Turbo dust extraction Sanding pad brake prevents scratches Stepless electronic control for various uses Encapsulated bearing for long service life Very smooth running through VS balancing 1-1/16 1-1/16 1/8 3/ N/A N/A Dia 6 Dia FES FES Includes: StickFix (H&L) sanding pad (6, soft, ), 1 abrasive sheet, Filter cartridge (489631), Plug it detachable power cord, In Systainer 3 (445596) Festool ETS 150/3 EQ ETS 150/5 EQ Random Orbit Sanders 6 $ FES Dia /64 1-1/ Dual Mode, Triple Function: Coarse sanding, fine sanding & polishing Fast Stock Removal: Without scratching Includes: Stickfix hook & loop soft sanding pad dia. 5 (125 mm, ), 1 Brilliant P120 abrasive, Plug-it Fine Sanding: New design for superior flatness Jetstream Pad Design: Better results and 30% longer abrasive life detachable power cord, In Systainer 2 (445434) Low Vibration: For easier working and top results Toolless Pad Change: A world first Festool Rotex RO 125 FEQ Random Orbit Sander 5 $ FES Dia /16 1-1/16 5 Rough sander, fine sander and polisher in one Optimum dust extraction through patented Jetstream principle Includes: StickFix (H&L) sanding pad (6, soft, ), Plug-it detachable cord, 1 abrasive sheet, Removable Sanding pad brake prevents scratches FastFix tool-free pad change handle (487865), Edge protector (493913), In Systainer 3 (445596) MMC electronics allows stepless electronic control for all applications Edge protector allows sanding close to edges without damage Festool Rotex RO 150 FEQ Random Orbit Sander 6 $ FES / N/A /32 1-1/ Full-area sanding into every corner through orbital sanding motion Sanding stroke of 2.5 mm guarantees above average material removal Includes: Plate, Stickfix 93 V sanding pad (soft 87633), 3 5/8 (93mm), Abrasive sheet, Slat sanding pad Integrated dust extractor port Stepless electronic speed control for various uses (488036), In Systainer 1 (445433) StickFix (H&L) sanding system for fast replacement of sanding pad and abrasives Festool DX 93 E-Plus Deltex Delta Sander $ FES /2 Dia N/A N/A 1-1/16 5 Outstanding results, since sanding speed range is optimized for stripping coatings and for solid surface work Includes: 4 1/2 (115mm) diameter dust extraction hood, StickFix sanding pad, StickFix abrasive disks, extra Slim, compact ergonomic design and low weight make handling easier hand grip, wrench, Systainer 2 (445434) Dust protection hood reduces flying dust when extraction is not available Spindle lock for toolless backing pad exchange Festool RAS /2 Rotary Sander $ StickFix hook-and-loop abrasive attachment for fast, easy grit changes FES /2 x N/A /32 1-1/ Powerful, efficient through fast material removal 9 Extra hand grip for excellent tool guidance and even application Includes: Orbital sander with 1/2 sheet (4-1/2 x 9) rectangular foot in Systainer 2 (445434) Large MPE sanding pad, hard wearing for long service life Stickfix system for fast abrasives changes Very smooth running through VS balancing, easy on joints Stepless electronic speed control for many applications Festool RS 2 Orbital 1/2 sheet sander $ festool sanders All of the Festool Sanders on this page have the following Standard Features: Stickfix Hook & Loop Pad: For fast abrasive changes; Plug it detachable power cord; 1-1/16 Dust Extraction Port: For a clean workpiece and clean air; packaged in a Systainer. Festool Package Deals Festool CT Mini Festool CT MIDI Festool CT 22 HEPA Festool CT 33 HEPA FES-P FES-P FES-PD FES-PM Festool 3-Year Guarantee The Festool guarantee grants a 3-year warranty on all electric tools, provided they are operated correctly. (Not applicable for wearing parts.) Not only is it one of the longest in the industry, it's also the strongest. You don't have to send tools in for maintenance like some manufacturers require. There are no ifs, ands or buts. $ $ $ $ Festool ETS 150/3 EQ Random Orbit Sander 6 FES-P $1, FES-P $ FES-PD $ FES-PM $ Festool Rotex RO 150 FEQ Random Orbit Sander Call to Order

6 Festool TS55 EQ Circular Saw Plunge-cut saw and guide rail system provide straight, splinter-free cuts on both sides of the blade right out of the box. Saw Includes: 55 Guide Rail, 48-tooth Carbide Blade, FS/2 Limit Stop, Splinterguard, In Systainer 4. FES KT $ Fein Random Orbital Sanders Heavy-duty commercial grade random orbital sanders with direct dust extraction. These sanders can be a big help in reducing the airborne dust and in reducing production time. These are top of the line commercial sanders. Available in 6 or 8. Includes Hook & Loop pad. power tools FPT-MSF Sander Size 6 FPT-MSF $ FPT-MOL-1200E $1, Festool TS 75 EQ Circular Saw A large cutting depth allows the user to cut through material 2-15/16 or 2-3/4 on the included guide rail. With 13 amps of adjustable power, the TS 75 has plenty of power for any project and weighs less than 14lbs. FES KT $ Festool Universal & Fine Tooth Saw Blade The Universal Saw Blade is use with all wooden materials, all construction panels, soft plastics etc. Intended for clean cuts. The Fine Tooth Saw Blade is designed for fine cross cuts on sheet goods, melamine to glue ready cross cuts in soft and hard woods. Intended for clean cross cuts. Fine Tooth Universal Type Model Dimensions (mm) Item# Universal TS x 2.2 x 20 FES $47.00 TS x 30 FES $75.50 Fine Tooth TS x 2.2 x 20 FES $58.00 TS x 30 FES $ Festool Linear Sander LS 130 EQ-Plus Up to three times faster than manual sanding. Quick, easy and tool free sanding base change using the ingenious FastFix system. Includes: 1 Standard Stickfix sanding pad 3 x 5 (80 mm x 133 mm), a 90 sanding pad, 2 Abrasive sheets, Plug it cable, in Systainer 1. FES $ *Wide variety of sanding accessories available online. Festool MFT/3 Multi-Function Table New and improved version of the Festool portable workbench. New features include; a more comfortable work surface height of 35-7/16 (90 cm), the side rails now have a V groove that supports a range of clamping options, and the fence system is now more robust and more versatile. Includes: Table with perforated top and foldaway legs, (2) guide rail supports, (1) angle unit, (1) fence rail, (1) adjustable stop, and (1) guide rail FS FES $ Fein 8-inch Polisher Superior performance with the 8 Fein Polisher. New efficient motor, electronic feedback circuitry and a unique gearing system. You get constant revolutions per minute (rpm) whether you re feathering a delicate area at 900 rpm or polishing a large surface at 2,700 rpm. Variable speeds between 900 and 2700 rpm. Polishing Pad not included. Model: Input: Speed: Weight: WPO-12-27E 1200 W rpm 2.3 kg Size 8 FPT-WPO-12-27E $ Buffalo Angle Polisher / Sander This is a good general purpose polisher at a great price! Variable speed (1,000 to 3,000 rpm) with electronic control that maintains a constant speed under load and offers a Lock-On switch for continuous use at one speed. Features a Slow Start for easier handling. Right, left or top handle mount. 100% ball and roller bearing construction. 120 V; 11 A Also includes 7 rubber pad, locking nut, wrench and side handle. 2 year warranty! BUF $99.99 Dynorbital Supreme Random Orbital Sander Non-Vacuum Dynorbital Supreme Random Orbital Sanders feature a perfectly balanced, weight-mated sanding pad with a one-piece hub design. The Dynorbital Supreme offers the most robust air motor design, and is best for horizontal sanding applications. 5 Inch Sander Orbit 3/16 in DYN $ /32 in DYN $ Inch Sander 5 & 6 Sanders! Orbit 3/16 in DYN $ /32 in DYN $ Call to Order

7 power tools wet/dry vacuums Vac FeinTurbo I Variable Speed # FPT $ FeinTurbo II Variable Speed # FPT $ FeinTurbo III Variable Speed # FPT $ Festool CT MINI Dust Extractor # FES $ Auto Start Watts Static Water Lift (inches) Air Flow (cfm) Net Weight (lbs) Cap. Dry (Gal) Cap. Wet (Gal) Noise (db) Dims (Inches) Features / /4 62 Combines easy portability with superior power. The two-stage motor is quiet and efficient and now offers variable speed Includes: 5-micron flter, Round Upholstery Brush, Crevice Tool, Rubber Power Tool Adapter, adjustment. The new design also features 6-wheels instead of 16-foot long Hose, 16-foot long Power Cord 4 to reduce tipping. Yes Designed for heavy, continuous, industrial use. The Turbo II can handle power tools with inputs of 40 to 2000 watts (.3 to 19 Includes: 5-micron Filter, Electronic Suction Control amps). The powerful two- stage motor offers bypass cooling. This means that if the hose or filter become blocked, air will still cool the motor. Now with Variable Speed for better efficiency. Yes Designed for heavy, continuous, industrial use. The Turbo III can handle power tools with inputs of 40 to 2000 watts (.3 to Includes: 5-micron Filter, Electronic Suction Control 19 amps). It offers the same features and technology as the Turbo II but with larger capacity and more power. Now with Yes x 13.5 x 16.5 (D x W x H) Includes: 1 fitted filter bag and 1 spare (456772) (Replaceable), 1 antistatic suction hose 1 x 11.5 (27 mm x 3.5 m, ), Angle adapter (456806), Delivered in a box Variable Speed for better efficiency. Low weight and small size Locking brake prevents accidental movement Quiet running for a more pleasant working environment On-board extra bag storage for fast replacement Stepless electronic suction control Wet and dry extraction with no complicated conversion Festool CT MIDI Dust Extractor # FES $ Festool CT 22 HEPA Dust Extractor #FES $ Yes Yes x 13.5 x 18.5 (D x W x H) Includes: 1 fitted filter bag and 1 spare (456772) (Replaceable), 1 antistatic suction hose 1 x 11.5 (27 mm x 3.5 m, ), Angle adapter (456806), Delivered in a box x 15 x 17 (D x W x H) Includes: HEPA filters, 1 fitted filter bag (452970) (Replaceable), 1 antistatic suction hose 1 x 11.5 (27 mm x 3.5 m, ), Delivered in a box Tool-Triggered or Manual Activation. Remarkable Dust Extraction Capability. Keeps your work area clean and the air you breathe dust-free Big Capacity...With a Small Footprint gallon capacity, with simple wet to dry conversion Adjustable Power/ Suction Settings. Quiet Running. For a more pleasant work environment HEPA filter elements filter down to 0.3 micron Locking brake prevents accidental movement Tool-triggered or manual on-off switch with smooth start-up Stepless electronic suction control Wet and dry extraction with no complicated conversion Integrated cleaning device (scratcher) cleans the filter Festool CT 33 HEPA Dust Extractor # FES $ Yes x 15 x 22 (D x W x H) Includes: HEPA filters, 1 fitted filter bag (452971) (Replaceable), 1 antistatic suction hose 1 x 11.5 (27 mm x 3.5 m, ), Delivered in a box HEPA filter elements filter down to 0.3 micron Locking brake prevents accidental movement Tool-triggered or manual on-off switch with smooth start-up Stepless electronic suction control Wet and dry extraction with no complicated conversion Integrated cleaning device (scratcher) cleans the filter FeinTurbo I FeinTurbo II FeinTurbo III CT MINI CT MIDI CT 22 HEPA CT 33 HEPA Call to Order

8 vacuum accessories Fein Paper Dust Bag for Turbo Vacuums These paper dust bags are sold in packages of 3. The disposable bag fits into the canister and holds the vacuumed material. Without it the dirt falls into the plastic canister and must be dumped. Vacuum /Pk Turbo I FPT K01 $14.20 Turbo II FPT K01 $14.90 Turbo III & IV FPT K01 $16.20 Fein 5 Micron Filter for Dust Extractors Cloth filter designed to be used for larger shop clean up, and is to be used by itself. This filter is not recommended for vacuuming up hazardous material, or when using a sander with a vacuum. This filter works with the Fein Turbo I, II, III, and IV. FPT AGA6 $78.80 Fein Turbo II Vacuum Wet/Dry Cleanup Kit Kit Includes: 1 attachment to vacuum floors & carpets, 2 attachment to vacuum up liquids, 3 anti-foam filter, 4 hand grip with air control, 5 extension tubes, 6 brush, 7 upholstery attachment, and 8 crevice nozzle. FPT-DW1 $ power tools Festool CT Vacuum Filter Bags Disposable filter bags for Festool CT Mini & Midi, CT 22, and CT 33 dust extractors. Sold by the 5 pack & 20 pack. Vacuum /5Pk CT 11 FES $31.00 CT 22 FES $31.00 CT 33 FES $35.50 CT Mini FES $19.00 Vacuum /20Pk CT 22 FES $ CT 33 FES $ Festool Vacuum Long Life Filter Element Re-usable long life filters for Festool CT 22 and CT 33 Dust Extractors. FES $60.50 Festool Compact Cleaning Set Festool Compact Cleaning Set in Systainer 1. For use with CT Dust Extractors. Includes plastic extension tube, 4-part floor nozzle, 4-part upholstery nozzle, bent hand pipe, and crevice nozzle. Suction hose is not included. FES $75.00 Fein Micron Filter and Flange Kit Kit Includes: Fein Micron filter, which increases filtration to 99.97% of all particles 1 micron and larger, the FPT-TII3002 mounting flange and the FPT-TII3001 mounting screw. For all Fein Turbo vacuums. FPT-ONEMCRN-KIT $51.00 Fein Vacuum Hose Step Adaptor The Fein vacuum hose step adaptor is made of hard plastic, and allows for connection to a power tool. The steps are different diameters and allow tailoring to the customer s power tool. Very versatile and allows for customization. FPT K13 $4.80 Fein Turbo Vacuum Brush Nozzle Round brush nozzle to fit all Fein Turbo and Mini Turbo vacuums. FPT A-13 $7.30 Festool Vacuum Special Nozzles and Brushes Festool Vacuum Special Nozzles and Brushes for the Festool family of dust extractors. Type Bevel ended Nozzle FES $24.00 Universal Brush Nozzle FES $14.00 Suction Brush FES $11.50 Upholstery Brush FES $8.50 Crevice Nozzle FES $8.00 Large Crevice Nozzle FES $17.50 Spark Trap FES $ Anti-Static Suction Hoses for Festool Dust Extractors Anti-Static suction hoses for Festool Vacuums. Temperature resistant to 150º F. Antistatic hose is only effective when used with an Anti-Static dust extractor. Hose Size 1 x 11.5 FES $ x 16.5 FES $ /16 x 11.5 FES $ /16 x 16.5 FES $ /16 x 23 FES $ Call to Order

9 power tools fein multimaster This is our most popular Multimaster package! Fein MultiMaster FMM 250Q Top FMM 250Q Top represents the most comprehensive Multimaster package with the new QuickIN quick-change accessory feature. Includes over 30 sanding sheets, several saw blades, sanding pads, and more. The Top package includes accessories for just about any sawing, scraping, grinding or sanding job. The result is one compact tool that has endless possibilities. Kit Includes: MultiMaster FMM 250 Q, sanding pad, 5 of each type of sanding sheet, grain 80, 120 and 180, universal E-CUT saw blade (29mm), HSS segment saw blade, Carbide-tipped segment saw blade, rigid stopping knife, Profile sanding set, dust extraction device, sanding pad, perforated, 5 of each type of sanding sheet, grain 80, 120 and 180, perforated, carbide rasp (triangular), perforated and plastic carrying case. FPT-FMM-250Q-TOP $ Fein MultiMaster Marine Top The MultiMaster Marine Top is an incredibly versatile and precise tool for all major applications in boatyards, at installation specialists, and for boat owners. It has been developed for anyone who wants to maintain and restore boats. It contains a range of selected accessories that are useful for internal and external refitting, maintaining and repairing. FPT-FMM-250Q-TOP-MARINE NEW! Package $ FMM 250 Start The MultiMaster FMM 250 has a more powerful 250 watt motor and improved with a new ergonomic grip design, while maintaining a low weight design. Added benefits include: Chuck with form-fitting mount to provide high torque transfer, powerful 250 Watt motor with electronic speed control, integrated interface for adaptation of additional system accessories and extensive range of available accessories. FPT-FMM-250-START $ Starter set includes: MultiMaster FMM 250, variable speed, one sanding pad, 5 grit each 60, 80, 120, 180 grit sandpaper, universal E-CUT saw blade, rigid scraper blade and key and mounting bolts. This package is put together with the boatbuilder in mind! Kit Includes: MultiMaster FMM 250Q-MS, Hook & Loop Sanding Pad, Plastic Back, Assorted Sanding Sheets: 5 each of 60, 80, 120, 180 Grit, Sanding Pad - Perforated, Assorted Sanding Sheets: 5 each of 60, 80, 120, 180 Grit - Perforated, Dust Extraction Attachment, Saw & File Set: M-Cut narrow (3/8 ), M-Cut wide (3/4 ), Carbide Cross-Stroke Narrow File, Universal Wide-Offset E-Cut Saw Blade (1-3/4 ), HSS 4 Saw Blade with Depth Stop, Carbide-Tipped Segment Saw Blade, Rigid Stopping Knife, 1 each 5/32 and 3/16 Teak Deck Blades, 2 Bristle Fleece, Felt Polishing Pads, and Plastic Carrying Case. See page 7 for MultiMaster abrasives. FMM 250Q Select FMM 250Q Select now boasts a more powerful 250 watt motor with electronic speed control and ergonomic grip, while still retaining a light-weight, soft grip feel. New improvements include tool-free QuickIN rapid clamping system, which allows accessory change with the flip of a switch, no key required. FPT-FMM-250Q-SELECT $ Kit Includes: MultiMaster FMM 250 Q, sanding pad, universal E-CUT saw blade (29mm), Carbide-tipped segment saw blade, HSS saw blade and rigid stopping knife Call to Order

10 multimaster accessories Fein MultiMaster Tile Kit Contains everything you need to remove cracked or chipped ceramic tile and old grout. Make professional repairs to tile walls, floors or countertops quickly and easily. Kit Includes: Carbide Segment Saw Blade, Carbide Circular Saw Blade, Carbide Rasp, E-Cut Blade 65mm - Japanese teeth, Flexible Scraper Blade and Bi-Metal E-Cut Blade. power tools Accessories for the MultiMaster These are just some of the fantastic accessories that are available for your MultiMaster tool. For a complete offering visit FPT $ Fein MultiMaster FMM Depth Stop The Fein MultiMaster FMM Depth Stop controls cutting depth for all Multimaster E-Cut and HSS wood saw blades. Please note that this depth stop is compatible only with FMM 250 and 250Q series Multimaster tools and will not fit older models MultiMaster Dust Extraction Kit Connect the MultiMaster to the Fein Turbo II / III / IV with this kit and keep your shop, your projects, and your lungs clean. Kit Includes: 2 perforated sanding pads with hook and loop, 5 perforated sanding sheets in 60, 80, and 120 grit, 1 extraction hood with suction hose, 2 hose sleeves, and 2 adapters for connection to most domestic vacuums. FPT $93.90 MultiMaster Mini E-Cut Kit with Diamond Sharpening Blade Use on wood, metal, plastic & fiberglass. Kit Includes: 3/4 and 3/8 wide Metal Cutting Saw Blade, 3/4 and 3/8 Diamond Sharpening Blade, Two Blade Adaptors and Screw. FPT $44.60 MultiMaster Profile Sanding Kit Provides flexibility in sanding hard to reach places, and custom profiles or contours. Kit Includes: Profile Clamp, Trapezoidal Profile, V Shape Profile, Concave Profile, Convex Profile (Large), Convex Profile(Small), Flat Profile, and 15 Assorted Sheets of Sandpaper (80, 120 & 180 Grit). FPT $59.50 MultiMaster FMM Accessory Set Kit Includes: Sanding pad perforated, 5 of each type of sanding sheet (grit 60, 80, 120 and 180, perforated), dust extraction device, 2 hose nozzles hose connection 1-1/16 in. dia, 1-1/4 in. dia, 2 adaptors for common domestic vacuum cleaners, carbide rasp perforated, Profile sanding set, & Plastic Case. FPT $ FPT $ Abrasives for the FEIN MultiMaster are on page 7. Item 1. Sanding Pad, Hookit (2 pack) FPT $ Sanding Finger Pad - Hook & Loop FPT $ Rigid Scraper Blade FPT $ Flush Wood Segmented Saw Blade FPT $ Flush Wood Saw Blade FPT $ HSS Saw Blade 2-1/2 FPT $51.30 HSS Saw Blade 2-1/2 (2 pack) FPT $94.70 HSS Saw Blade 3-1/8 FPT $52.60 HSS Saw Blade 3-1/8 (2 pack) FPT $98.50 HSS Saw Blade 3-1/8 (5 pack) FPT $ HSS Saw Blade 4 FPT $ HSS Segmented Saw Blade FPT $ E-Cut Blade Razor Sharp 1-3/8 FPT $30.60 E-Cut Blade Razor Sharp 2-1/2 FPT $ Teak Blade 3 mm FPT $51.90 Teak Blade 4 mm FPT $51.90 Teak Blade 5 mm FPT $ Dustless Sanding Pad (2 pack) FPT $ Diamond Saw Blade FPT $ Segmented Carbide Grout Blade FPT $ Standard E-Cut Saw Blade 1-3/8 FPT $24.60 Standard E-Cut Saw Blade 1-3/8 (3pk) FPT $49.20 Standard E-Cut Saw Blade 1-3/8 (10pk) FPT $ Standard E-Cut Saw Blade 2-1/2 FPT $ Universal E-Cut Saw Blade 1-3/4 FPT $ Universal E-Cut Saw Blade 1-1/8 FPT $29.70 Universal E-Cut Saw Blade 1-1/8 (3pk) FPT $59.30 Universal E-Cut Saw Blade 1-1/8 (10pk) FPT $ Call to Order

11 power tools Festool 1400 EQ Router New top-quality performer in the medium-power router class. It gives you more power in a lighter package, easier operation, smoother running, deeper stroke, and superior dust extraction. ITEM # FES $ Only Kapex KS 120 Sliding Dual Compound Miter Saw The Festool Kapex KS 120 sliding compound miter saw cuts molding to length, compound bevel cuts, up to 6-5/8 crown, base, case, and chair rail. No other sliding compound saw offers so much value with so many features. The Kapex features an outstanding 91 percent dust capture rate when used with a CT dust extractor. Faster cut alignments with dual-laser marking system. Rapid miter setting with cam-action lock system. FastFix blade change system for rapid blade changes. Rail-forward design allows you to work in tight quarters. MiterFast angle transfer device eliminates complex angle calculations. Easy and precise bevel angle setting with counter spring system and fine adjustment. 12 miter saw capacity in a 10 miter saw design. Attention to air flow and system components delivers highly efficient dust extraction. Festool Jigsaws The Trion Jigsaw has a patented three-way saw blade guide for precision cutting with accurate angles, and improved splinterguard for splinter-free cuts (even on veneered surfaces), so that no finishing work is necessary. Offers simple tool-free saw blade change thanks to the patented FastFix quick change system. Includes a Systainer 1 storage system. PS 300 ITEM # FES $1, PSB 300 EQ-Plus Includes: D-handle jigsaw, 6 A motor, Fast-blade change, Splinterguard, 2 blades, hose adapter. PS 300 EQ-Plus Includes: Barrel handle jigsaw, 6 A motor, Fast-blade change, Splinterguard, 2 blades, hose adapter. Type Item# PSB 300 EQ-Plus FES $ PS 300 EQ-Plus FES $ Festool C12 Cordless Drills The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. Includes: 2x battery packs, Charger, Centrotec chuck (492135) with starter set including 4mm wood drill, Phillips 2 HiQ bit and Centrotec bit holder/adapter, FastFix (quick connect) straight chuck, In Systainer 1. Type NICD 1.3 AH FES $ NICD 2.4 AH FES $ NIMH 3.0 AH FES $ Festool T12 Drill-Driver System Combines Lithium Ion battery power and run-time with proven brushless motor technology for an unstoppable drill-driving system. Includes: Centrotec, Eccentric, Right Angle, and Jacobs chuck, Centrotec starter set, (2) Li batteries, and charger. Voltage 10.8 v (Li-ion) FES-M0103 $ Festool HL 850 E Planer Lets you work in dead spots, it can plane across the entire width of the rebate. The one-sided allows the planer head to flush with the other side of the planer casing. The side guard swings up as the rebate depth increases. Planing up to the edge in deep rebates is no longer a problem. Equipped with the unique spiral blade. FES $ West System Scarffer A unique tool for cutting accurate scarf joints in plywood up to 3/8 thick. Attaches easily to most circular saws and is simple to remove. WSY-875 $ Call to Order

12 saw blades Jig/Sabre Saw Blades For Bosch Machines Bosch power tools Length Width Thick Teeth Recommended Use Pack (5) Bi Flex Metal Cutting - High Speed Steel Teeth, Shatter Resistant Back 3" 5/16" 0.042" 12 Mild steel 1/8" - 1/4". Nonferrous 1/8" - 5/8", laminates and reinforced plastics. BLD86263 $ " 5/16" 0.042" 18 Mild steel up to 3/16". Nonferrous up to 1/4" and laminates. BLD86264 $ " 5/16" 0.042" 24 Thin wall mild steel sheet and tubing. Also thin nonferrous metals and laminates. BLD86267 $14.25 Glas-Fab Fiberglass 4 5/ " 2-way For smoother splinter free cuts in fiberglass, woods, plexiglass. Hard surface coating. BLD87072 $21.38 Wood Cutting - High Carbon Steel 4" 5/16" 0.050" 6 For smooth cuts in hard and soft woods up to 2-1/2" plywood. BLD87074 $ / " 6 Fast cuts in hard and soft woods up to 2-3/8. Tight contours in metal and wood BLD87076 $15.37 Bi-Flex Wood Cutting - High Speed Steel Teeth, Shatter Resistant Back 4" 5/16" 0.042" 10 For smooth cuts in hard and soft wood, plywood up to 3-1/4", also soft plastics. BLD87073 $17.13 Fiberglass Cutting - Long Life 3" 5/16" 0.042" 12 Hard abrasion resistant coating gives added blade life in fiberglass, metal, BLD88269 $ " 5/16" 0.042" 8 stainless steel BLD88266 $17.95 Reciprocating Saw Blades Abrasive Materials Wood - Taper Metal scrolling For Metal Scrolling Bi-Flex Metal Cutting and Scroll long life and high speed steel teeth, Shatter resistant back. Universal 1/2" Shank. Wood - Non-Taper Length Width Thick Teeth Recommended Use Pack (5) 6" 3/4" 0.035" 18/14 For metals heavier than 3/32 -- bar stock, pipe, etc. Can be used on fiberglass and "Transite". BLD39684 $ " 3/4" 0.035" 10 For metal decks/roofing, non-ferrous metals BLD40610 $ " 3/4" 0.035" 10 Heavy gauge metals, masonite, wood BLD40840 $ " 3/4" 0.035" 14 For metal heavier than 1/8 Also bar stock BLD40414 $ " 3/4" 0.035" 14 rubber, masonite, fiberglass BLD40614 $ " 3/4" 0.035" 18 For heavy gauge sheet metal, conduit, pipe, BLD40418 $ " 3/4" 0.035" 18 tubing, thin fiberglass, etc. BLD40618 $ " 3/4" For metals less than 18 gauge -- formed sheet, trim BLD40624 $17.02 Wood Cutting All purpose high alloy. Tapered blade allows you to get into tight spaces. While the Non-tapered blade is stronger and will cut straighter. Length Width Thick Teeth Recommended Use Pack (5) 6" Taper 0.050" 6 General roughing-in work in wood. Tiger Shark blue. BLD45007 $ " 3/4" 0.035" 6 For wood and nail-embedded woods. all composition material, non-ferrous metals. White BLD45606 $ " Taper 0.050" 6 General roughing-in work in wood and nail-embedded woods. Fast cutting. White BLD45106 $29.60 Rikon Deluxe Bandsaw 14 This Deluxe 14 Bandsaw from Rikon has a more powerful 1.5 hp motor and 13 re-saw capability. Dual speed control and easy blade changes make for clean precision cuts of varying materials. The stand includes hinged doors for easy access, tool holder and a cabinet for blade and jig storage. It also includes a light above the work area and heavy-duty fence with re-saw bar. RIK $ Rikon Radial Drill Presses Constructed with a rack and pinion for positioning the horizontal arm, allowing the machine to handle every operation of a regular drill press, plus much more. Size 37 Tall RIK $ Tall RIK $ BENCH FLOOR Call to Order