Tooling, Screws and Consumables

Transcription

1 Tooling, Screws and Consumables

2

3 Contents Glass Gluing Fittings Glass door pivot hinge, external pivot Glass door hinge Glass shelf support with rubber pad Furniture knob Adapter for furniture castor/rondella table leg Cable outlet two-piece CAM Cam lock for glass doors for all-glass constructions Barrel bolt Tooling Edge bander KA 65 Plus 230 V Module edge router B MKF 700 EQ-Plus V Vacuum pump and clamping unit Cordless haer drill BHC 18 Oscillator OS 400 EQ-Set 230 V Pendulum cut saw TSC 55 REB-Plus/XL-FS Li cordless Hard wax trend colours/retouching pen Measurement tape/fixing clamp FF.2

4 Table and Furniture Base Fittings Contents Folding hex key set Twist open utility knife Pliers/wrenches Claw haer/screwdriver Universal magnetic holder Bit-Box with 10 Bits Hotmelt Screws and Consumables Self tapping screws with counter sunk head HOSPA Chipboard screw HOSPA Pan head chipboard screw VARIANTA Special screws Screw with M4 thread/wing nut/washer Cover cap Glue-in sleeve/dowel Spreeding sleeve/expanding dowel Screw-in sleeve/sleeve inserter Hanger/plastic dowel Threaded rod DIN 975/hexagon nut DIN 934 FF.3

5 Glass Gluing Fittings Glass door pivot hinge, external pivot, opening angle 210 Material: Stainless steel Finish: Matt For glass thickness: 6 12 For all-glass constructions For glass/wood constructions For all-glass constructions, for inset doors Installation: For glue fixing (UV glass adhesive bonds) Load bearing capacity: Max. 10 kg per pair Bonding surface on door 20 x x : 1 pair For glass and wood constructions, for inset doors Installation: For glue fixing onto doors (UV glass adhesive bonds), for screw fixing with Euro screws at cabinets Load bearing capacity: Max. 20 kg per pair Bonding surface on door : 1 pair 20 x x FF.4

6 Glass Gluing Fittings Glass door hinge for glue fixing with exposed axle Area of application: For inset doors Version: With exposed axle, with spring For glass thickness: Max. 10 Opening angle depends on glass thickness For all-glass constructions Glass thickness A Min. chamfer B For glass/wood constructions x45 o 2x45 o 3x45 o 4x45 o 6x45 o Number of hinges per door Sample measurements for 8 thick glass Hinge distance min. 500 Door width up to 600 The door's width should not exceed it s height For all-glass constructions Adjustment facility: Side adjustment +2, height adjustment ±2, depth adjustment ±2 Opening angle: Up to 220 Installation: For glue fixing (UV glass adhesive bonds) Gluing diagram for cabinet side panel Gluing diagram for door 3-dimensionally adjustable for door alignment with millimetre accuracy. ±2 ±2 ±2 Supplied with 1 Glass door hinge for glue fixing 1 Set of installation instructions Material/finish Stainless steel matt FF.5

7 Glass Gluing Fittings Glass shelf support with rubber pad Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Note: Not suitable for laminated glass Load bearing capacity kg/pc. : 1 or 4 pcs Furniture knob Area of application: For mirror doors Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Not suitable for laminated glass Diameter Diameter FF.6

8 Glass Gluing Fittings Adapter For furniture castors with M8 threaded bolt M8 Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Not suitable for laminated glass For thread M For RONDELLA Table leg Version: Wiith M10 x 25 steel threaded bolt, black Material: Stainless steel mounting plate Finish: Mounting plate matt Diameter For tabel leg diameter Cable outlet two-piece, round For drilled hole Ø: 50 Installation: Gluing (UV adhesive bonds) also for gluing to wood Note: Not suitable for laminated glass Ø Material/finish Stainless steel matt FF.7

9 Glass Gluing Fittings CAM Cam lock for glass doors, for all-glass constructions Single door Material: Stainless steel Finish: Matt ground Locking travel: 180 (locking not necessary) Locking type: Plate cylinder Key changes: 200 different key changes possible Installation: Gluing (UV glass adhesive bonds) Note: Not suitable for laminated glass For glass thickness: Max. 12 Version Different key changes Installation Keyed alike (Key change SG 1) Overlay mounting Double door Inset mounting Drilling pattern Drilling pattern For glass thickness: Max. 15 Version Different key changes Keyed alike (Key change SG 1) FF.8

10 Glass Gluing Fittings Barrel bolt Area of application: For all-glass constructions or glass and wood constructions Material: Stainless steel Finish: Matt Note: Not suitable for laminated glass For all-glass constructions Installation Gluing (UV glass adhesive bonds) For glass and wood constructions Installation Gluing (UV glass adhesive bonds), press fitting into Ø8.5 drilling Ø FF.9

11 Tooling Edge bander KA 65 Plus 230 V Version Complete with guide table, 4x natural EVA adhesive, in a SYSTAINER SYS 4 TL Cat.No 00F Natural EVA adhesive Height: 26 Processing temperature 190 o Colour Natural White : 48 pcs. Diameter Cat.No 63 00F F Module edge router B MKF 700 EQ-Plus V Version Ball bearing guide brake, in Systainer 2 T-LOC Cat.No 00F Vacuum pump and clamping unit Workpieces can be turned up to 360 o and swiveled up to 90 o Sensitive surfaces can be clamped without damaging them 4 different vacuum plate sizes, can be changed without tools Version Extendable for large workpieces by clamping unit : 1 set Cat.No 00F FF.10

12 Tooling Cordless haer drill BHC 18 Unbeatable power to weight ratio thanks to the combination of EC-TEC motor Vibration damping for effortless work; maximum working comfort in all work situations Brushless EC-TEC motor with integrated motor management for long service life and the highest output Version High-quality lithium-ion battery technology for the longest sustained usage Cat.No 00F Oscillator OS 400 EQ-Set 230 V Version Wood saw blade HSB 50/35/J and HSB 100/HSC, universal saw blade USB 78/32/Bi, 4 m plug-it cable in a SYSTAINER with lid compartment SYS 2 TL-DF, positioning aid and depth stop in SET OS-AH/TA : 1 set Pendulum cut saw TSC 55 REB-Plus/XL-FS Li cordless Version 2 nd lithium-ion battery pack 4.2 Ah, 2 nd charger TCL 3, HW fine tooth saw blade W48, chip collection bag, splinterguard, viewing window, operating tool, guide rail FS 1400/2, in a SYSTAINER SYS 5 T-LO Cat.No 00F Cat.No 00F FF.11

13 Tooling Hard wax trend colours Area of application: For repairs and correction of wood surfaces whith heavy duty Colour: Different wood colours Contents: 20 bars Light resistant and recoatable Hard wax trend colours : 1 set Set consists of 1 pen each: Ash Ash, nature Cremewhite Oak, medium Alder, brown Larch Limba, light Pine, antique Cherry, reddish Beech, light Beech Oak, nature Birch Alder Oak, dark Oak, nature Cherry Oak, light Oak, rustic light Cherry, medium Battery smelter Supplied with 1 Melting device 2 Batteries AA 1 Installation manual Area of application For processing of hard wax : 1 set FF.12

14 Tooling Häfele Fine-Liner Retouching pen lack Glaze retouching pen Area of application: Especially suitable for the repair in kitchen and bathroom Version: Rounded tip, especially suitable for opaque apply Colour White Silver coloured Touch-up pencil Colour: Different wood colours Contents: 12 pens Set consists of 1 each pen: Maple/Birch/Ash Mahogany, reddish Beech, nature Walnut, light Oak, rustic Walnut, dark Cherry, light Elm, light Cherry, nature Teak Area of application: For laminating the cut surface of silver coloured profile handles Specially adapted to silver-colored aluminum profiles Colour Aluminium coloured Area of application For repairs and correction of wood surfaces : 1 set FF.

15 Tooling Measurement tape The black magnetic movable hook, measures both internal and external diameters Steel durable blade with special coating Easy reading graduation, smooth pulling and recoiling Rubber gripping prevents to slip and comfortable in use Size /L m 16 x x x Klick clamp Lightweight and easy to use Clamping pressure quickly applied through use of lever ratchet Opening width x depth 160 x FF.14

16 Tooling Heavy duty screw clamp Span 50/ / / / / / / / / / / DIY Screw clamp Span 50/ / / / / / / / / FF.15

17 Tooling Folding hex key set (8 in 1) Highly corrosion resistance for longer life and durability Rubber grip handle for comfortable usage 8 pcs. set in metric 1.5, 2, 2.5, 3, 4, 5, 6 and 8 Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L Twist open utility knife Precision die cast zine body Rubber grip handle for comfortable usage Fixed blade system Available with 3 blades stored Material: Zinc alloy Finish: Chrome plated Size/L FF.16

18 Tooling Straight jaw locking plier Highly corrosion resistance for longer life and durability Serrated jaw for better grip Comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 10 / Adjustable wrenches Highly corrosion resistance for longer life and durability Comfort grip handle With metric scale bar Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 / / / FF.17

19 Tooling Groove joint pliers Highly corrosion resistance for longer life and durability High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 10 / Linesman pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 7 / / FF.18

20 Tooling Long nose pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 / / Diagonal pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 / FF.19

21 Tooling Claw haer with fiberglass handle Material: Drop forged carbor steel Full heat-treted & poliished face Fiberglass handle absorbs shocks and vibration Textured rubber ensured a comfortable secure grip Maintenance by proper lubricating oil Size/L 16oz/ Claw haer handwood handel Material: Drop forged carbor steel Full heat-treted & fully poliished Strong hardwood handle construction Maintenance by proper lubricating oil Size/L 16oz/ FF.20

22 Tooling Magnetic Phillips & slotted screwdriver Highly corrosion resistance for longer life and durabillity High grade plastic materic for comfort handle Material: CR-V steel shaft Finish: Chrome plated Black magnetic tips Maintenance by proper lubricating oil Description Phillips screwdriver Slotted screwdriver Version Size/L PH2 x x Multi function pliers Supplied with Long nose pliers, regular pliers, wire cutter, wire stripper, nail file, can opener, medium slotted screw driver, large slotted screw driver, phillips screw driver, bottle opener, serrated knife and sharp knife,,,,,,,, Material: Stainless steel components, aluminium handle with plastic grip Foldable and light weight, easy to carry High sleek polish with spring loaded pliers Tool lock mechanism enhanced safety by locking components into usage position Available with nylon bag Description Multi function pliers FF.21

23 Tooling Universal magnetic holder With permanent magnet and holding ring Drive: 1/4 Bit holder: 1/4 Length : 1 or 100 pcs. Bit-Box with 10 Bits Set consists of: 1 Universal magnetic holder 1 Bit flat 5,5 1 Bit flat 6,5 1 Bit PH1 1 Bit PH3 2 Bits PH2 1 Bit PZ1 1 Bit PZ3 2 Bit PZ2 Bit-Box with 10 Bits FF.22

24 Tooling Hotmelt Application: Application: To be used on slow edgebanders with low application For automatic edgebanders, e.g. for edges made of veneer, temperature e.g. for PVC, paper and polyester edge resinated paper, melamine resins, PVC and ABS Also for softforming with thermo-sensitive PVC edges Medium melt viscosity, fast melting and good feed Low viscosity; fast melting properties; long open time; properties after initial melting good color stability; good resistance to oxidation in the melt Good adhesion; high oxidation and color stability in the melt Technical data: Technical data: Application temperature: C Application temperature: C Feed speed: 5 20 m/min. Feed speed: Roller application m/min Density: 1.40 g/cm³ Nozzle application: m/min Appearance: Beige Density: 1.45 g/cm³ Softening range: 75 C (Kofler cover), 95 C (ring and ball) Appearance: Beige ³ Version Hotmelt F manual edgebanders machine : 25 kg J Softening range: 90 C (Kofler cover) ³ Version Hotmelt S softform edgebanders machine : 25 kg J FF.23

25 Screws and Consumables Self tapping screw with counter sunk head Drive: Cross recess PH Finish: Nickel plated Size Qty/box #4x1/2 1, #4x5/8 1, #4x3/4 1, #4x7/8 1, #4x1 1, #4x1-1/4 1, #4x1-1/2 1, #6x1/2 1, #6x5/8 1, #6x3/4 1, #6x7/8 1, #6x1 1, #6x1-1/4 1, #6x1-1/2 1, #6x1-3/4 1, #6x2 1, #7x1-1/ #7x5/ #7x3/ #7x7/ #7x #7x1-1/4/ #7x1-1/ #7x1-3/ #7x #8x5/ #8x3/ #8x #8x1-1/ #8x1-1/ #8x1-3/ #8x #10x3/ #10x #10x1-1/ #10x1-1/ #10x1-3/ #10x Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive PZ PZ FF.24

26 Screws and Consumables Hospa Chipboard screw with counter sunk head Drive: Cross recess PH Thread: Fully threaded Thread Ød Ø Length L /Box / Bulk pack Galvanized 3.0 1,000 24, , , , , , ,000 24, , , , , , , ,000 16, , , , , , ,000 12, , , , , , , ,000 8, , , , , , Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive PZ PZ FF.25

27 Screws and Consumables HOSPA Chipboard screw with countersunk head Thread Ød Ø Length L Galvanized , , , , Drive: Cross recess PZ Thread: Fully threaded Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive PZ / PZ Thread Ø d Ø Length L Galvanized , (Head Ø6.0) 10, , , , , , , , Drive: Cross recess PZ Thread: Partly threaded Thread Ød Ø Head Ødk Ø Thread Ød Ø Head thickness k Length L Cross recess m PZ PZ3 Drive Galvanized , , , FF.26

28 Screws and Consumables HOSPA Chipboard screw with countersunk head Finish: Nickel plated Drive: Cross recess PZ Thread: Fully threaded Stainless steel 304 Material: Stainless steel 304 Drive: Cross recess PZ Thread: Fully threaded Thread Ød Ø Head Ødk Ø Thread Ød Ø Head thickness k Length L Cross recess m PZ PZ PZ PZ2 Drive , , , , , Thread Ød Ø Thread Ød Ø Head Ødk Ø Head height k Length L Cross recess m Drive PZ PZ , FF.27

29 Screws and Consumables HOSPA Chipboard screw, raised head HOSPA Pan head chipboard screw Thread: Fully threaded With cross recess Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive PZ PZ Thread Ød Ø Length L Galvanized Nickel plated Burnished 3.0 1, , , Thread: Fully threaded With cross recess Thread Ød Ø Thread Ød Ø Head Ødk Ø Head height k Length L Cross recess m Drive PZ PZ Galvanized 3.0 1, , , , , , , , , , , , , , , , , , , , , , , , FF.28

30 Screws and Consumables HOSPA Chipboard screw with countersunk head Cover cap for central hole Ø2.5 Ø Thread: Fully threaded Central hole Ø2.5 Ø Thread Ød Ø Head Ødk Ø Head height k Cross recess m PZ2 Thread Ød Ø Length L Drive Galvanized , Colour White, RAL 9010 Light grey, RAL 7035 Dark grey, RAL 7037 Black, RAL 9005 Pine coloured, RAL 1034 Beige, RAL 1015 Fawn coloured, RAL 8007 Cherry tree : 100 or 500 pcs FF.29

31 Screws and Consumables Chipboard screw with countersunk head Version: With routered ribs Material: Hardened steel Drive: T-star TS Thread: Chipboard screws partially threaded with drilling point Area of application: Pre-drilling not required, particularly suitable for MDF boards, coated and non-coated chipboard, hard wood and solid wood corner connections, front edge fixing Thread Ød Ø Head Ødk Ø Drive 4,0 8 TS20 4,5 9 TS20 5,0 10 TS25 Thread Ød Ø Length L Dim. A Galvanized , FF.30

32 Screws and Consumables VARIANTA Special screw with countersunk head for cruciform mounting plates, TAB and TAB V shelf connector, KEKU fitting and SOLO 32 carcase connector For Ø3 drillings in wood cross recess drive PZ2 Ø For Ø5 drillings in wood cross recess drive PZ2 Ø Thread: 2.0 pitch, thread Ø4.2, shaft Ø2.8 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated or 1, Thread: 2.2 pitch, thread Ø6.2, shaft Ø4.6 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated Galvanized or 1, For Ø5 drillings in wood cross recess drive PZ2 Ø Thread: 2.2 pitch, thread Ø6.2, shaft Ø4.6 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated or 5, FF.31

33 Screws and Consumables VARIANTA Special screw with countersunk head for roller guided drawer runners Screwing into wood and aluminium For Ø3 drillings in wood, cross recess drive PZ2 Ø Thread: 2.0 pitch, thread Ø4.2, shaft Ø2.8 Ø Ø Nominal length L Galvanized or 5, Screw with M4 thread Drive: PZ2 cross slot and longitudinal slot Length L Galvanized or 1, For Ø5 drillings in wood, cross recess drive PZ2, T-star recess TS20 Ø Drive: PZ2 cross slot and longitudinal slot Thread: 2.2 pitch, thread Ø6.0, shaft Ø4.6 Ø Ø Nominal length L Galvanized or 8, or 5, Length L Nickel plated or 1, FF.32

34 Screws and Consumables Wing nut Washer DIN 9021 American shape (similar DIN 315) Thread d Dim. B Dim. H M M M M Dim. h Inner Ø Ø Outer Ø Ø Thickness Galvanized Thread d Galvanized M M M M Spring ring DIN 127 Washer DIN 125 Inner Ø Ø Outer Ø Ø Thickness Galvanized Inner Ø Ø Outer Ø Ø Thickness Galvanized FF.33

35 Screws and Consumables Plastic cover cap for chipboard screws with cross recess PZ For cross recess Colour PZ2 White, RAL Pine coloured, similar RAL Fawn coloured, RAL For cross recess PZ3 For cross recess PZ2 : 1,000 pcs. CAPFIX Cover cap Diameter 14 Diameter 18 Area of application: Covering screw heads or MINIFIX connectors Thickness: 0.9 Diameter: 14 or 18 Installation: Gluing (self adhesive) Covering screw heads Covering MINIFIX connectors Made of plastic Colour Diameter 14 White, RAL 9010 Black, RAL 9005 Light grey Beech wood structure Oak wood structure Pine wood structure : 52 or 1,040 pcs Colour Diameter 18 White, RAL 9010 Black, RAL 9005 Light grey Beech wood structure Oak wood structure Pine wood structure : 36 or 720 pcs FF.34

36 Screws and Consumables Made of real wood Can be sanded, stained and surface treated Material Material Diameter 14 Diameter 18 Maple Maple Oak Oak Ash Ash Pine Pine Cherrywood Cherrywood : 52 or 1040 pcs. : 36 or 720 pcs. Cover cap made of real wood Finish: Untreated Can be stained and surface treated Specified RAL colours are not binding and only for your guidance For chipboard screws with cross recess or T-star recess For recess PZ2 or TS15/20 : 100 pcs. Material Maple Beech vaporized Oak Ash Pine Cross recess PZ2 or T-star recess TS15/ For recess PZ3 or TS25 : 100 pcs. Cross recess PZ3 or T-star recess TS25 Material Maple Beech vaporized FF.35

37 Screws and Consumables For MINIFIX 12 and 15 connector housing Diameter Material 18 Maple Diameter Material 17 Maple Beech vaporized Oak Beech vaporized Ash Oak Pine : 100 pcs. : 100 pcs. For cup drillings, for example Material Maple Beech vaporized Oak Ash Pine : 1 or 100 pcs FF.36

38 Screws and Consumables Cover cap made of plastic, for pressing in drilled holes Colour White, RAL 9010 Light grey, RAL 7035 Sepia brown, RAL 8014 : 500 pcs Colour White, RAL 9010 Light grey, RAL 7035 : 500 pcs Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 : 500 pcs Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 : 500 pcs Colour Fawn coloured, RAL 8007 White, RAL 9010 : 100, 500 pcs. Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 : 500 pcs Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 Dark brown, RAL 8014 : 500 pcs. Colour White, RAL 9010 Dark brown, RAL 8014 : 500 pcs FF.37

39 Screws and Consumables Cover cap made of plastic, for pressing in drilled holes Colour For drilled hole Ø 35 Ø White, RAL 9010 Fawn coloured, RAL 8007 Black, RAL 9005 : 100 or 1,000 pcs Material Beech, vaporized Pine Oak Maple Ash : 100 pcs Material Beech, vaporized Pine Oak Maple Ash : 100 pcs Material Beech, vaporized Pine Oak Maple Ash : 100 pcs Material Beech, vaporized Pine Oak Maple Ash : 100 pcs FF.38

40 Screws and Consumables Glue-in sleeve Material: Nylon Colour: Natural coloured For drilled hole Ø Ø Length L Drilled hole Ø Ø Interior thread M4 Exterior thread or 1, or 5, or 1, or 1, Interior thread M or 1, or 5, or 5, or 5, Glue-in dowel, injection-moulded in strips of 20 For drilled hole Ø 10 Ø Material: Plastic Exterior thread: Ø11 Ø Interrior thread Length M : 20 or 1,000 pcs. Knurled sleeve For drilled hole Ø10 Ø Material: Plastic Interrior thread Length M : 100 or 1,000 pcs. FF.39

41 Screws and Consumables Spreading sleeve, nylon, for wood screws up to Ø4 thread With collar For drilled hole Ø5 Ø Colour Natural coloured : 1, 1,000 or 5,000 pcs. Length Without collar For drilled hole Ø5 Ø Colour Natural coloured : 1, 100 or 1,000 pcs. Length Injection-moulded in strips of 20 For drilled hole Ø5 Ø Colour Natural coloured : 5,000 pcs. Length Injection-moulded in strips of 20 For drilled hole Ø5 Ø Injection-moulded in strips of 12, with internal thread M6 For drilled hole Ø10 Ø Colour Natural coloured : 1,000 or 5,000 pcs. Colour Natural coloured : 1,200 or 5,400 pcs. Length Length FF.40

42 Screws and Consumables Expanding dowel Internal thread M4 Screw-in sleeve Without flange For drilled hole Ø 5 Ø Core Ø Ø Head Ø Ø Material: Brass Finish: Bright Drive: Hexagonal socket Exterior Ø Ø Length : 100, 1,000 or 3,000 pcs. Interior thread Exterior Ø Ø Core Ø Ø Head Ø Ø M SW4 M SW5 Hexagonal socket Internal thread M6 Interior thread Length L M or 2, M or 1, Material: Brass Finish: Bright Drilling depth: Min. 15 Design: Length 12 with nylon balls Length L For drilled hole Ø 8 Ø : 100, 1,000 or 3,000 pcs. With flange Drive: Hexagonal socket Interior thread Interior thread Exterior Ø Ø Length L Core Ø Ø Exterior Ø Ø Core Ø Ø Head Ø Ø Head Ø Ø Hexagonal socket M SW6 M SW8 M SW10 Galvanized M6 100 or 1, or 2, M8 100 or 2, or 1, M or 1, or Yellow chromatized M or 3, or 2, M or 2, FF.41

43 Screws and Consumables Screw-in sleeve with steel spring Sleeve inserter Area of application: Fort inserting screw-in sleeves with screwdriver slot Material: Zinc alloy Finish: Galvanized Drive: Hexagonal socket 12 Interior thread : 1 or 100 pcs. M Screw-in sleeve with screwdriver slot Finish: Bright Drive: Screwdriver slot Interior thread Length Core Ø Ø Exterior Ø Ø Core Ø Ø Length Exterior Ø Ø M or 1, M or 1, M or 1, or 1, or 1, or 1, M or 1, M or Interior thread T-nut Sleeve Ø Ø Edge thickness Exterior Ø Ø M M M M M Interior thread Interior thread M4 M5 M6 M8 M10 Length L Finish Bright Galvanized Bright Galvanized Bright Galvanized Bright Galvanized Bright Galvanized Exterior Ø Ø Sleeve Ø Ø M M M M M Edge thickness 1, FF.42

44 Screws and Consumables Hanger For drill-in, with toothed hanging edge Screw hook Depth Interior Ø Ø Material: Plastic Colour: White Exterior Ø ø Interior Ø ø : 1, 100 or 1,000 pcs. Exterior Ø Ø Thickness Depth Thickness Finish: Galvanized Drive: Cross recess PZ Length L Thread Ø D ø : 1 or 100 pcs. For drill-in, with key-hole shape Fixing set Material: Plastic Colour: White Exterior Ø Ø : 1, 100 or 1,000 pcs. Exterior Ø Ø Depth Thickness Key-hole width Interior Ø Ø Key-hole width Exterior Ø ø Interior Ø ø Depth Thickness Dim. X Dimension X screw hook, plastic wall plug Length L Screw hook: 80 Wall plug: 60 Screw hook: 100 Wall plug: 80 : 1 or 50 pcs. Thread Ø D ø Screw hook: FF.43

45 Screws and Consumables Hanger Screw hook Plastic dowel Finish: Galvanized Drive: Screwdriver slot Important: Min. 1x screw Ø Version Fully threaded : 1,100 or 100 pcs Material: Plastic Finish: White For drill-in, with heigth adjustment Heigth adjustement: ±3 with eccentric screw Material: Plastic housing, steel base plate Colour: Black Finish: Galvanized Installation: For press-in Area of application: For mirrors, panels, etc. ± Outer Ø ø : 1, 100 or 1,000 pcs Length L : 1 kg Drill ØD x depth T Ø Quanitity pcs/kg 26 6 x 36 2, x 43 1, x x FF.44

46 Screws and Consumables Hanger bolt Hexagon nuts DIN 934 Thread d Without drive Length L Drive Galvanized M With T-STAR Drive M6 50 TS M8 50 TS Thread d Dim. A Wrench size Galvanized M M M M M Hexagonal lock nut DIN 985 with plastic ring Threaded rod DIN 975 Thread: Fully threaded Thread d Galvanized M4 50 or M M M8 25 or M10 20 or M12 10 or M14 10 or M Thread d Dim. A Dim. H Wrench size Galvanized M M FF.45