Connector Technology, Shelf Supports

Size: px
Start display at page:

Download "Connector Technology, Shelf Supports"

Transcription

1 Connector Technology, Shelf Supports

2

3 Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and connecting bolts TOFIX Carcase connectors RV Carcase connectors CONFIRMATCarcase connectors CONFIR-PLAN Carcase connectors RTA Shelf connectors TAB 18 Shelf connectors RAFIX TAB 0 S Shelf connectors RASANT-TAB Shelf connectors ONEFIX Shelf connectors Wood dowels and biscuits Corner profile MAXIFIX 35 Worktop connector FF.

4 Contents Connection Fittings Two-piece dowel connector Connecting screws, sleeves and nuts Connecting brackets Profiled plate for machine-recess installation MODULAR Connection fittings Rear panel connector Connector components KEKU Suspension fittings Bed fittings Flexible stabilizer profile Shelf Supports Shelf supports Glass shelf supports Shelf support systems Shelf supports for invisible installation Shelf supports with clamps Brackets Glass shelves FF.3

5 Information Getting the best from your furniture. Häfele is not responsible for the functionality, but provides it! We allow the implementation of requirements and design ideas within our products. The fact that many of our furniture connectors are produced in our own factories is a guarantee for continuous further development, high quality and rational production. In this way families of fittings have arisen, such as the MINIFIX, MAXIFIX, RAFIX, RASANT-TAB, SLIMFIX, ONEFIX and PUSHFIX connector systems. Häfele understands customers needs and most importantly, anticipated growing trends in product development. The connector technology range will continually be adapted to meet future needs of our customers. Areas of application Living and bedroom cabinets Occasional furniture Shelves and gallery cabinets Kitchen furniture Wardrobe furniture Bed connectors FF.4

6 Information Finding the right connector in no time. Area of application Minifix 15 Rafix 0 Rafix Tas 0 Tap 18 Refix Tab 0 S Maxifix 35 RV Tofix Bedroom wardrobes Shelves and post furniture Hallway furniture Small furniture items Flat-packed furniture Beds Load categories Angular rigidity Pull-out strengths For wood thicknesses from from Processing Surface drilling Face drilling Edge drilling Machine processing Tool-less housing installation Tool-less bolt installation Features Pre-fixing Flush Mitre joint connection Heavy-duty connection Double-ended bolt available Cover caps available Mounting options Centre panel Side panel Intermediate shelf, shelves Drawer parts For rear panel Material Zinc alloy: Housing/support part Plastic: Housing/boss insert See page FF.14 FF.30 FF.3 FF.45 FF.48 FF.7 FF.38 FF.37 FF.5

7 Information Area of application FF.6

8 Information The installation friendly ones: Minifix Tab 18 Shelf support for plug fitting The versatile specialists: RV Shelf support for screw fixing Rafix Tab 0S The heavy-duty ones: Maxifix 35 Solo 3 Tab 18 Tofix The honeycomb panel specialists: Rafix 0 HC Aerofix Tab 0 HC The cost reducers: Universal corner connector Shelf support for plug fitting Rafix Tab 0 Confirmat Bolts for various applications: S100 C100 8 S35 S0 M 0 Low Medium High Bolt for Minifix 15 Pull-out strength Installation * For direct fixing into drill hole = 5 without tools Wood thickness* For drill hole 3 5 Type of thread Type of bolt M4 M6 M8 Double-ended bolt Capped bolt Mitre bolt S100 1, 16, 19 / / / / / / / C100 8 / 16, 19 S35 Bolt for Maxifix 19 / / / / / / S0 Bolt for Rafix 16, 19 / / / / / / M 0 HC, 16, 19 / FF.7

9 Information Lightweight panel connectors Häfele is a pioneer in connecting fittings for lightweight panels without frame, and was one of the first companies to develop connectors that make it possible to create extremely robust, load-bearing structures using this innovative material. Specifically developed lightweight panel fittings and the existing well-known fittings are available to the building trade and industry for furniture construction with lightweight panels. Lightweight panel design Lightweight panels consist of two components (lightweight panel without frame) Top layer (upper and lower) made from thin chipboard, MDF, solid wood, etc. Core (e.g. honeycomb, rigid foam, light wood, etc.) A wooden frame may be glued on in the vicinity of the core to provide addtional stability (lightweight panel with frame). Lightweight panel without locking bar Lightweight panel with locking bar Advantages Weight reduction (optimises handling and transport) Ecological because it protects resources Good load-bearing capacity and long service life (less deflection/ bending strenght) than chipboard panels Considerable amount of design freedom Area of application All kids of freestanding cabinets and post furniture Kitchen worktops Office and conference tables Shelving systems Design area FF.8

10 Information Selection of fittings The right fitting is selected depending on the area on the lightweight panel in which the fitting is going to be located: i.e. the top layer/core or the frame area (solid wood). If thefitting is going to be installed in the top layer/core area the thickness of the top layer is also decisive as far as fitting selection is concerned. Top layer/core: Specially developed inserts and screws create the basis (screw-on point) for fitting RTA connectors and fittings for lightweight panels and also standard fittings. Frame attachment: No restriction during selection, special fittings are not required for lightweight panels. Inserts and screws Carcase connector for lightweight panels Special fittings for lightweight panels 1 With 4 top layer 4 Varianta special screw for lightweight panels 5 Aerofix 100 adhesive insert 6 Chipboard and/or Varianta screw 1 With 4 top layer 5 Aerofix 100 adhesive insert 6 RAFIX 0 HC 7 Connecting bolt for Aerofix With 4 top layer 4 Varianta special screw for lightweight panels 10 HC shelf support Top layer of 8 or above 4 Varianta special screw for lightweight panels 6 Chipboard and/or Varianta screw 3 Lightweight panel - frame attachment 4 Varianta special screw for lightweight panels 6 Chipboard and/or Varianta screw 1 With 4 top layer or above 4 Varianta special screw for lightweight panels 9 Tab 0 HC 1 With 4 top layer 11 HC rear panel bracket 1 For 8 top layer 1 Maxifix 35 HC lightweight worktop connector FF.9

11 Information Pull-out resistance Varianta special screw for lightweight panels Lightweight panel with 4 thin clipboard top layer Lightweight panel with 8 thin clipboard top layer Chipboard 16 Aerofix 100 adhesive insert Lightweight panel with 4 thin clipboard top layer Installation The Varianta HC special screw can be screwed in manually or screwed into a hole prepared with a machining centre (CNC). Drill 3 or 5 hole into top layer in required position. Screw in the Varianta HC special screw. The screw will support a load iediately after installation. FF.10

12 Carcase Connectors MINIFIX 1 and 15 Carcase Connectors The MINIFIX family of carcase connectors is based on the centric ball principle. This attachment method allows a large tightening and supporting surface to be integrated in a small connector housing, ensuring that connections are positively secured and tight. The half round connecting bolt head locates centrally in the cup-shaped recess in the MINIFIX housing and is positively secured. MINIFIX therefore has many advantages: Automatic centering of the bolt means that shelves are no longer subject to lateral displacement in relation to the side panel. The long tightening distance of more than 5 from only half a turn of the housing compensates for drilling distance tolerances of +1 to approx without loss of tightness. Tension is rapidly achieved as the housing is tightened, without having to tighten the housing to the limit (195 ). Secure tightening is guaranteed, even in case of repeated disassembly and re-assembly. Delicate and elegant shape. º Drilling distance B Bolt hole Drill-hole Drilling depth Drill-hole Ø: 1 or 15, depending on choice of connector housing Drilling depth: Depending on choice of connector housing and wood thickness, see ordering table Drilling distance B: Distance from centre of MINIFIX to front edge 4 or 34, depending on choice of connecting bolt Bolt hole Ø: Diameter 5, 7 or 8 depending on choice of connecting bolt FF.11

13 Connector Technology, Shelf Supports Carcase Connectors The MINIFIX CLOCKFACE The MINIFIX clockface shows the tightening distance A, which is separated into 3 travel segments with different functions: 1. Closing distance: 0 75 (6 to 8.30) = 3. pull Bolt head is pulled into centre of housing (no tightening effect yet).. Tightening distance: (8.30 to 11.30) = pull The connection is securely tightened. Tightening is initiated at 10 (10 o clock), provided that specified drilling distance is adhered to. Optimum security will be reached at 165 (11.30 o clock). 3. Retightening distance: (11.30 o clock to 1.30 o clock) = 0.5 pull The retightening distance is only required if: There are drilling distance tolerances A furniture item has been disassembled and re-assembled several times A furniture item has been subjected to severe loading ( ) = ( ) = 0.5 Definitions The arrow must point exactly in the direction of the bolt when the housing is inserted Tools required: For wood thicknesses from 1 : Cross slot screwdriver PZ For wood thickness of 13 and 15 : Cross slot screwdriver PZ or Flat blade For wood thickness of 16 9 : Cross slot screwdriver PZ or Flat blade For plastic MINIFIX 15 connector housing: Cross slot screwdriver PZ or Flat blade MINIFIX tightening keys can also be used (optional). FF.1

14 Carcase Connectors MINIFIX 1 Connector housing Verbindungstechnik, Boden- und TablarträgerKorpusverbinderVerbindergehäuse Minifix 1Preise Verfügbarkeit BestellungPlanung, Konstruktion Connector housing: Ø1 Material: Connector housing zinc alloy For wood thickness: Min. 1 Dimension A: Distance from centre of bolt hole top edge of connector housing Drilling depth: Bolt hole Ø: 5 or 8 depending on choice of connecting bolt Drilling distance B: Distance from centre of MINIFIX to front edge 4 or 34 (plastic housing Ø ) depending on choice of connecting bolt C A E B D A Bolt hole B Drilling depth C Dimension A D Wood thickness Ø +0. Ø Ø E Drilling distance B Connector housing without or with rim Drive: PZ cross slot, centre For all connecting bolts Dim. A: 6 Dim. A Without rim Drilling depth Dim. A With rim Drilling depth Cover cap Ø17 for connector housing MINIFIX 1 Ø Without rim With rim Packing: 100 or 1,000 pcs. Bright Nickel plated Area of application: For MINIFIX 1 without rim only Material: Plastic Brown Pine coloured White Packing: 500 or 5,000 pcs. FF.13

15 Connector Technology, Shelf Supports Carcase Connectors MINIFIX 15 Connector housing Verbindungstechnik, Boden- und TablarträgerKorpusverbinderVerbindergehäuse Minifix 15Preise Verfügbarkeit BestellungPlanung, Konstruktion Connector housing: Ø 15 Material: Connector housing zinc alloy For wood thickness : from 1 Dimension A: Distance from centre of bolt hole top edge of connector housing Drilling depth: Bolt hole Ø: 5, 7 or 8 depending on choice of connecting bolt Drilling distance B: Distance from centre of MINIFIX to front edge 4 or 34 depending on choice of connecting bolt C A E B D A Bolt hole B Drilling depth C Dimension A D Wood thickness Ø Ø E Drilling distance B Connector housing without or with rim, for wood thickness 1 Drive: PZ cross slot or flat blade For all connecting bolts Dim. A: 6 Dim. A Without rim Drilling depth Dim. A With rim Drilling depth FF.14

16 Carcase Connectors Minifix 15 Connector housing With rim, wood thicknesses from 1 For min. wood thickness Drilling depth D Dim. A Drive from PZ cross slot or flat blade from PZ, PZ3 cross slot, flat blade or SW4 hexagon socket Bright Black Nickel plated from from from from PZ cross slot or flat blade Packing: 100 or 1,000 pcs Without rim, wood thicknesses from 16 For min. wood thickness Drilling depth D Dim. A Drive from PZ cross slot, flat blade or SW4 hexagon socket Bright Black Nickel plated from from from from PZ slot, flat blade or SW4 hexagon socket from from FF.15

17 Carcase Connectors MINIFIX 15 Connector housing Connector housing with rim, for wood thickness of 34 Dim. A Drilling depth Drive: PZ cross slot or flat blade For all connecting bolts For min. wood thickness Dim. A Drilling depth Bright Nickel plated Packing: 100 or 1,000 pcs. Cover cap Ø17 for connector housing MINIFIX 15 Area of application: For MINIFIX 15 without rim only Material: Plastic For wood thickness 1, 13, 15 For wood thickness 16, 18, 19, 3, 6, 9 For wood thickness Packing: 500 or 5,000 pcs. Brown RAL 8007 Grey RAL 7037 Pine coloured Black RAL 9005 White RAL , , 16, 18, 19, 3, 6, FF.16

18 Carcase Connectors MINIFIX COMFORT C100 Spreading bolt Area of application: For one-sided installation, for industry and trade, for assembly-friendly flat-packed furniture Material: Zinc alloy bolt, plastic spreading dowel Colour: Spreading dowel black Thread: Spreading dowel Installation: For toolless insertion and unscrewing Function When the connector is tightened the taper on the bolt spreads the dowel and forces the threads into the wood. The stronger the tightening force acts, the securer the connection. Drilling depth stop ensures ideal bolt position No surfaces damage caused by insertion and removal of spreading bolt For drilled hole Ø5 Ø Thread length L Packing: 100 or,000 pcs. Drilling distance B Galvanized For drilled hole Ø8 Ø For drilled hole Ø10 Ø For wood thickness: up to 15 and above Thread length L Packing: 100 or,000 pcs. Packing: 100 or,000 pcs. Drilling distance B Galvanized Thread length L Drilling distance B Galvanized FF.17

19 Carcase Connectors MINIFIX STANDARD S100 Connecting bolts For drilled hole Ø5 and bolt head Ø7 ØØ With M6 thread and bold head Ø7 Ø Thread: Special thread Drive: PZ cross slot or flat blade Thread length L Drilling distance B Galvanized Packing: 100 or 1,000 pcs. Thread: M6 Drive: PZ cross slot or flat blade MINIFIX STANDARD S00 Connecting bolts For drilled hole Ø 5 and bolt head Ø6.5 Ø Ø Thread length L Drilling distance B Yellow galvanized Packing: 100 or 1,000 pcs., plastic sleeve Thread: Special thread Drive: PZ cross slot Thread length L Packing:, 000 pcs. Drilling distance B Galvanized FF.18

20 Carcase Connectors MINIFIX STANDARD S00 Connecting bolts With M6 thread and bolt head Ø6.5 Ø, plastic sleeve Thread: M6 Drive: PZ cross slot Thread length L Packing:, 000 pcs. Drilling distance B Galvanized Connecting bolt S300 S300 Connecting bolt New development from the Minifix system: Considerably more robust by increased breaking torque More secure hold in drill hole by increased overtorque No sagging into drill hole, drilling depth stop ensures ideal bolt position For Ø5 drill hole, with special thread With M6 thread : Galvanized Drive: PZ cross slot Thread: Special thread Thread length L Packing: 100 or,000 pcs. Drilling distance B Galvanized : Galvanized Drive: PZ cross slot Thread: M6 Thread length L Drilling distance B Galvanized Packing:,000 or,500 pcs. FF.19

21 Carcase Connectors MINIFIX INDUSTRY M100 Connecting bolts For drilled hole Ø5 and bolt head Ø6.5 Ø Ø L Thread: Special thread Drive: PZ cross slot Thread length L Packing:,000 pcs. Drilling distance B Yellow galvanized MINIFIX INDUSTRY M00 Connecting bolts For drilled hole Ø5 and bolt head Ø7 ØØ Thread: Special thread Drive: PZ cross slot With M6 thread and bolt head Ø7 Ø Thread length L Packing:,000 or,500 pcs. Drilling distance B Galvanized Thread: M6 Drive: PZ cross slot Thread length L Packing: 1,000 or,000 pcs. Drilling distance B Galvanized FF.0

22 Carcase Connectors Dowels for M6 thread M6 Spreading dowel M6 Glue-in dowel For drill hole Ø 8 or 10 Ø M6 Glue-in dowel magazine For drill hole Ø 10 Ø For drilling hole Ø Material M6 spreading dowel 8 Brass M6 glue-in dowel 8 Nylon 10 Nylon M6 glue-in dowel magazine 10 Nylon Packing: 100 or 1,000 pcs. Length L MINIFIX Capped bolt : Galvanized Drive: PZ cross slot Drilled hole: 5/11 More load baring ability because the body of bolt has diameter similar as drilled hole. Thread length L Packing: 1, 100 or 000 pcs. Drilling distance FF.1

23 Carcase Connectors MINIFIX Capped bolt Area of application: For one-sided installation Installation: For inserting without tools into through drilled holes 7 or 8 For drilled hole Ø7 Ø Material: Plastic Panel thickness Drilling distance B Bronce coloured Packing:,000 pieces For drilled hole Ø8 Ø8 For plastic housing not usable Panel thickness W Packing: 100 or 1,000 pcs. Drilling distance B Nickel plated Burnished FF.

24 Carcase Connectors MINIFIX Double bolt For drilled hole Ø7, with rim Ø Installation For drilled hole Ø8, with snap ring Ø Installation Area of application: For edge-to-edge joints Drilling distance B Area of application: For double-sided installation Thread length L Packing: 100 or 50 pcs. Drilling distance B Galvanized Packing: 100 or 500 pcs. Galvanized MINIFIX GV Mitre-joint connector Mitre angle Distance Drilling depth Bolt hole Wood thickness Note The distance in the table apply to mitre-joint connectors with drilling distance of B 44. For drilling distance B 4, 0 must be deducted from the specified dimensions. Please use connector housings without rim. Mitre cut Wood thickness Inset distances for drilling distance B 44 in FF.3

25 Carcase Connectors MINIFIX GV Mitre-joint connector For one-sided installation with drilled hole Ø7 Ø Area of application: For mitre cuts of 30º to 90º With nylon dowel with fir tree foot Thread length L Packing: 100 or 1,000 pcs. Drilling distance B Drilled hole Ø Galvanized Area of application: For mitre cuts of 0º to 90º With M6 thread Thread length L Packing: 100 or 1,000 pcs. Drilling distance B Galvanized For double-side installation with drilled hole Ø7 Ø Double bolt with joint Area of application: For mitre cuts of 0º to 90º Drilling distance B Packing: 100 or 500 pcs. Galvanized FF.4

26 Carcase Connectors RONDORFIX Carcase connector for wood thickness 16 Installation Drilling depth Wood thickness Drilling depth Drilling depth Drilling distance B = depending on type of housing and wood thickness = B 33.5 (33.5 ) drilling distance from centre of housing to front edge RONDORFIX Eccentric housing without flanged rim Material: Zinc alloy : Bright Drilling depth Dimensions A Packing: 100 or 1,000 pcs. Cover cap Glued dowels with M6 internal thread Area of application: For RONDORFIX eccentric housing without flaged rim Material: Plastic Colour White Packing: 100 or 1,000 pcs. Material: Plastic Colour: Natural coloured Drilled hole D Length L Packing: 100 or 1,000 pcs. FF.5

27 Carcase Connectors RONDORFIX Connecting bolt With special thread screws into pre-drilled holes, for one-sided or two-sided mounting For pre-drilled holes Ø5 Ø Drilling distance B 33.5 Galvanized Packing: 100 or 1,000 pcs With M6 thread, screws into dowels, for one-sided mounting For pre-drilled holes Ø8 or Ø10 Ø Ø Drilling distance B Packing: 100 or 1,000 pcs Bright Galvanized FF.6

28 Carcase Connectors MAXIFIX 35 Carcase Connectors Drilling distance B Drilling depth Wood thickness Dim. A Bolt hole 9 The MAXIFIX 35 carcase connector is particularly suitable for connections that are permanently subjected to high loads such as connections in carcases and beds, counters and face-frame furniture. Can be used for wood thicknesses of 19 and above. The MAXIFIX 35 carcase connector is particularly suitable for mass manufacture in the furniture industry. MAXIFIX 35 Connector housing Dimension A: 9.5 Dimension A Drilling depth Drilling depth: 15.5 Material: Zinc alloy With cross soft For wood thickness Bright Nickel coloured Nickel plated With heragon socket Dimension A Trim cap for MAXIFIX 35 Drilling depth PZ3 cross slot Min SW6 hexagon socket Min Packing: 100 or 50 pcs. Material: Plastic White Brown Beige Black Nickel coloured Packing: 100 or 1000 pcs. FF.7

29 Connector Technology, Shelf Supports Carcase Connectors MAXIFIX S35 Connecting bolt For drilling hole Ø5 for MAXIFIX 35 Ø Thread: Special thread Thread length L: 16 Drilling distance B Bolt length BL Galvanized Packing: 100 pcs. With M6 or M8 thread for MAXIFIX 35 Thread length L: 9.5 Thread Drilling distance B Bolt length BL Galvanized M M Packing: 100 pcs. Screw-in dowel Cross dowel Ø1 1 Inside-thread For drill hole Length L Yellow chromatized M6 Ø M8 Ø Packing: 100,,000,,500 or 3,000 pcs. Drive: Flat blade Inside-thread Dimensions L Galvanized M M Packing: 100 or 1,000 pcs. FF.8

30 Carcase Connectors Capped bolt for MAXIFIX 35 Mitre-joint connector for MAXIFIX 35 Installation: For double-sided installation, plug in through drilled hole 9 without tools Mitre angle Drilling depth Panel thickness W Double-ended bolt for MAXIFIX 35 Installation: For double-sided installation, plug in through drilled hole 9 without tools Dimension B Bolt length BL Galvanized x Packing: 100 pcs. Bolt length BL Galvanized Packing: 100 pcs. Distance Wood thickness Mitre cut Distance 19.5º º º º º º º º º º º º º º º º º Dimension B 60.0º º º 50.5 Area of application: For double-sided installation, for mitre cuts of 90º 180º º º Drilling depth Galvanized x Packing: 100 pcs. Bolt hole Wood thickness FF.9

31 Carcase Connectors RAFIX 0 System The Rafix 0 RTA connector systems have zinc alloy tightening elements that are based on the centric principle. The advantages are: Secure tightening, even after repeated slackening and re-tightening No displacement of side panels, because bolts are centrally guided. Tolerances are compensated for by long tightening distance Comfortable tightening with drive tool in 5 position All drilling operations take place on a flat surface A comprehensive range of connecting bolts, sleeves and accessories for any installation situation is available for the Refix 0 connector systems. RAFIX 0 Connector housing made from zinc alloy or plastic Connector housing without dowel With tightening element for tightening and fixing of the components Only one drill hole Small design With or without rim (zinc alloy housing available only with rim) RAFIX Tab 0 Shelf connector housing made from plastic Shelf connector without dowel Without tightening element With design and drilling demensions identical to Rafix 0 Tightening in slightly angled position Installation and removing by pushing on and lifting the connecting bolt, no tools required With rim Installation The RAFIX 0 have two types of recess to accomodate the connecting bolt Without ridge: The shelves can be inserted from the front and from above. With ridge: the shelves can only be inserted from above; the cabinet elements are pre-assembled Access from above to the tightening element is possivble due to the specially designed housing. Concealed installation of the connectors is therefore possible (e.g. with shelves) and tightening via a Ø 10 through hole. The through hole is then concealed using a cover cap. Comfortable tightening of the connector from underneath with screwdriver in 5 position FF.30

32 Carcase Connectors RAFIX 0 Connector housing Drilling depth Wood thickness Drilling depth Wood thickness Drilling depth Drilling depth Drilling depth contingent on wood thickness and used connector housing With and without ridge With and without ridge With and without ridge Dimension A: Distance between centre of bolt hole and top edge, corresponds to half of the wood thickness Drilling depth: Depends on wood thickness and type of connector housing that used. Drilling depth Material: Zinc alloy Drive: PZ cross slot For wood thickness With ridge Dim. A Drilling depth Nickel plated Without ridge Packing: 100 or 500 pcs. For wood thickness With ridge Packing: 100 or 500 pcs. Drilling depth Dim. A Drilling depth Material: Plastic Drive: Cross slot PZ Beige Brown Without ridge Black White FF.31

33 Connector Technology, Shelf Supports Carcase Connectors For flush fitting, with ridge Drilling depth Material: Plastic Version: With countersunk rim for flush fitting Drive: Cross slot PZ For wood thickness Dim. A Drilling depth Beige Brown Packing: 100 or 1,000 pcs. Black White RAFIX Tab 0 Connector Wood thickness Wood thickness Dimension A: Distance between centre of bolt hole and top edge, corresponds to half of the wood thickness. Drilling depth Drilling depth With and without ridge Drilling depth Drilling depth Flush mounted Function The connector housing is pressed into the shelf and pushed onto a RAFIX 7 diameter connecting bolt. The tapered surfaces of the connector housing ensure that the connecting bolt is extremely tight. The catch prevents the shelf from moving upwards away from the connecting bolt. For shelves and support panels the drop-down shelves can be fastened using RAFIX-TAB alone. RAFIX carcase connectors can also be inserted into the shelves of tall cabinets to prevent the side panels from bulging out. With ridge For wood thickness from Dim. A Drilling depth Material: Plastic Burnished Brown Black White White aluminium Packing: 100 or 1,000 pcs. Drilling depth FF.3

34 Carcase Connectors RAFIX STANDARD S0 Connecting bolts For drilled hole Ø3 Ø Thread: Special thread Drive: PZ cross slot and flat blade Thread length L Galvanized Packing: 100 or,000 pcs. Glue-in dowel magazine, for drilled hole Ø5 Ø For drilling hole Ø5 Packing: 1,000 or 5,000 pcs. Material Nylon For drilled hole Ø5 Ø Thread: Special thread Drive: PZ cross slot and flat blade With M4 thread Thread length L Drive: PZ cross slot and flat blade Thread length L Packing: 100 or,000 pcs. Galvanized Packing: 100, 1,000 or,000 pcs. Galvanized FF.33

35 Connector Technology, Shelf Supports Carcase Connectors Dowels for M4 thread M4 Spreading dowel M4 Glue-in dowel Threaded sleeve For drilling hole M4 Spreading dowel Ø5 M4 Glue-in dowel Material Brass Length L Ø8 Nylon Ø Packing: 100, 1,000 or 5,000 pcs. Area of application: For double-sided installation Installation End screw Installation With M6 thread For drilling hole Length L Length L Nickel plated Galvanized Ø Packing: 100 or 1,000 pcs. Area of application: Suitable as capped bolt with sleeve Packing: 100 or 1,000 pcs. Drive: Cross slot PZ and flat blade Thread length L Packing: 100 or,000 pcs. Galvanized FF.34

36 Carcase Connectors Dowels for M6 thread M6 Spreading dowel M6 Glue-in dowel For drilled hole Ø Ø M6 Dowel magazine Ø 10 For drilled hole Ø 10 Ø 10 For drilling hole M6 Spreading dowel Ø8 M6 Glue-in dowel Material Brass Length L Ø8 Nylon Ø M6 Dowel magazine Ø10 Packing: 0, 100 or 1,000 pcs. Nylon With M6 thread Drive: PZ cross slot and flat blade Thread length L Galvanized Packing: 1,00 or 5,400 pcs. M6 Glue-in dowel magazine Ø 10 For drilled hole Ø 10 Ø For drilling hole Material M6 Glue-in dowel magazine Ø10 Packing: 1,00 or 5,400 pcs. Nylon Length L FF.35

37 Carcase Connectors RAFIX INDUSTRY M0 Connecting bolts for drilled hole Ø5 Ø Thread: Special thread Drive: PZ cross slot Thread length L Packing: 100 or,000 pcs. Material 7.5 Zinc alloy galvanized Thread length L Packing: 100, 1,000 or 5,000 pcs. Material 1 Steel galvanized RAFIX COMFORT C0 Double bolt for drilled hole Ø5 Ø Area of application: For double sided installation Drive: PZ cross slot and flat blade RAFIX COMFORT C0 Double bolt for drilled hole Ø8 Ø For panel thickness W Packing: 100 pcs. Area of application: For double-sided installation For panel thickness W Packing: 100 or 500 pcs. Galvanized FF.36

38 Carcase Connectors TOFIX Carcase connectors Dim. A = Drilling dim. Dim. B = Wood thickness Drilling dim. A = B Connector housing Version: With pre-mounted tightening element Material: Plastic connector housing, zinc alloy tightening element For wood thickness: 18 6 Installation: Housing for press fitting Colour Connector housing white Connector housing brown Packing: 100 or 1,000 pcs. Connecting bolt for Ø5 drill hole Ø Version: With special thread Material: Zinc alloy Bright Packing: 100 or,000 pcs FF.37

39 Carcase Connectors RV Carcase connector with clipping facility Easy fitting and removal by means of pre-fixing Side panel Shelf Internal element the connector and 9 connecting bolt position Can be fitted manually or by automatic processing Extremely strong angle stability Top element Connecting bolt When assembling furniture the internal element clips into the top element and is therefore pre-fixed. Distance x = Wood thickness RV/O Top element Material: Zinc alloy connector, steel connecting bolt Drive: PZ cross slot Installation: For screw-fixing with pre-mounted connecting bolt Nickel plated Packing: 100 or 500 pcs RV/U-T3 Internal element with tolerance compensation of ± 1.5 ± : Galvanized Drive: PZ cross slot Installation: For screw-fixing Galvanized Packing: 100 or 1,50 pcs FF.38

40 Carcase Connectors Corner connector Area of application: For small carcases and light weights Material: Plastic Version: With cover cap Installation: For screw-fixing Width 44 Housing Material Colour Plastic White Beige Trim cap Dark brown Packing: 100 or 1,000 pcs. FF.39

41 Carcase Connectors CONFIRMAT One-piece connector Drilling hole Ø Ø Blind drill hole Ø For drilling hole Ø4 Ø Through hole for shank : Galvanized Head hole Ø:.5 Type of head: Countersunk head Drive: PZ cross slot Ø Shank Ø Ø Packing: 100, 500 or,000 pcs. Length L Trim cap for one-piece connector Material: Plastic Installation: For pushing into screw head Drive: PZ cross slot Diameter Packing: 100, 500 or 5,000 pcs. Colour 10 White 1 White, RAL 9010 Light grey, RAL 7035 Pine coloured Beige, RAL 1015 Brown, RAL 8007 Dark grey, RAL 7037 Black, RAL FF.40

42 Carcase Connectors CONFIRMAT One-piece connector For drilling hole Ø5 Ø Type of head: Countersunk head shank Ø Ø Shank Ø Ø Packing: 100, 500, 1,000 or 1,500 pcs. Length L Galvanized With PZ3 cross-slot With size 4 allen key Type of head: Cylinder head Shank Ø Ø With size 4 allen key SW4 Packing: 100 or 1,000 pcs. Length L Galvanized Trim cap for one-piece connector Material: Plastic Insatallation: For pushing into screw head For drive PZ3 cross-slot Size 4 allen key SW4 Diameter Packing: 100, 500 or 1,000 pcs. Colour 1 White Pine coloured Brown Black 15 White Brown Black 1.5 White Pine coloured Brown Black FF.41

43 Connector Technology, Shelf Supports Carcase Connectors CONFIR-PLAN Universal connector Side panel Pressure plate Installation 1 Screw one-piece CONFIRMAT connector into side panel until pressure plate fits just beneath the protruding head Slide in pressure plate and tighten CONFIRMAT one-piece connector Dimension X depending on selected CONFIRMAT connector CONFIRMAT One-piece connector Area of application: For concealed connections with high corner strength : Galvanized For drilling hole Ø: 5 Drive: Size 4 allen key Pressure part, for drilling hole Ø35 Ø Trim cap, for drilling hole Ø35 Ø Ø Length L Packing: 100, 500, 1,000 or 1,500 pcs. Packing: 1 or 500 pcs. Packing: 100 or 500 pcs Material Steel Material Plastic Colour Yellow chromatized Colour Dark brown FF.4

44 Carcase Connectors RTA & TAB 18 Shelf connectors The RTA and TAB 18 shelf connectors fill the functional gap between shelf supports and furniture connectors. The angled connecting surfaces pull the shelf tightly against the side panel and therefore provide good corner stability. Only the small base plate of the support is visible after installation. RTA and TAB 18 Shelf connectors Boss insert Shelf Side panel VARIANTA Special screw Screw-mounted support part Plug-in support part TAB 18 with tensioner, connecting, locking and secure shelves Tensioning the tensioner in the boss insert, locks the shelf in position and connects the support and the boss insert firmly with each other. This prevents the installed shelves from tipping and provides good angular rigidity and excellent pull-out strengths. Drill hole in shelf for boss insert Press-fit boss insert Attach support to side panel Slide support onto boss insert Tighten screw of boss insert TAB 18 without tensioner, connecting shelves This fitting could be used in cases where shelves need to be removed quickly and at a different heights. Drill hole in shelf for boss insert Plug-fit boss insert Attach support to side panel Slide support onto boss insert FF.43

45 Carcase Connectors RASANT TAB RTA and Shelf connector This fitting could be used in cases where shelves need to be removed quickly and with different heights. Its design forms a uniform appearance with the connectors Drill hole in shelf for boss insert Plug-fit boss insert Attach support to side panel Slide support onto boss insert Shelf connectors In contrast to the RTA and shelf connectors, the shelf supports firmly secure the shelf in the side panel. The shelf supports could be used in cases where no additional stabilisation function is required, but a more stable connection as with usual shelf supports are desired. TAB 0 S Shelf connector This fitting could be used to install wooden and metal shelves in furniture. This connector has an integrated safety function to prevent the shelves from tipping and lifting. The connecting bolt engages vertically and horizontally and therefore secures the shelf. FF.44

46 Carcase Connectors TAB 18 with tensioning element Screw fixing Installation: Support for screwing or plugging into Ø5 drilled hole boss insert for press fitting into Ø18 drilled hole Drilling depth Ø Ø For wood thickness from Dim. A Drilling depth Nickel plated Screw-fixing Plug-in Drilling depth Plug into Ø5 drilled hole Ø Packing: 100 pcs TAB18 without tensioning element Screw fixing Installation: Support for screwing or plugging into Ø5 drilled hole boss insert for press fitting into Ø18 drilled hole Plug-in Drilling depth Drilling depth Ø Ø For wood thickness from Screw-fixing Dim. A Drilling depth Nickel plated Plug into Ø5 drilled hole Ø Packing: 100 pcs. FF.45

47 Connector Technology, Shelf Supports Carcase Connectors Punch tool Application The insertion tool incorporates a recess to accoodate the boss insert. After aligning the tool parallel to the edge of the carcase, the boss insert is inserted by gently tapping with a haer. Material: Hardwood handle with steel ring reinforcement, plastic mount to accoodate boss insert Area of application For easy and accurate insertion of boss inserts Packing: 1 pc One-way insertion tool Material/Colour Plastic black Packing: 1, 10 or 100 pcs FF.46

48 Carcase Connectors RAFIX Tab 0 S Wooden shelf Metal shelf Area of application: For wooden and metal shelves Function: When the shelf is inserted, the connecting bolt first engages vertically into the housing (vertical securing), than the shelf is horizontally pressed in (anti-tilt facility) so that the shelf is protected from tilting and lifting 1. Vertical securing: Makes it difficult to unintentionally lift the shelf. Anti-tilt facility: Prevents tilting and unintentional removal of the shelf (e.g. when pulling out heavy objects) Dim. A: Distance from centre of bolt hole to top edge of connector housing Drilling depth: Installation: Tool-less installation for press fitting, harpoon fixing for wooden shelves, with clip fastener for metal shelves Drilling dimensions and installation Tilt protection back Tilt protection front and back! FF.47

49 Carcase Connectors Connector housing, for shelf thicknesses from Vertical securing. Anti-tilt facility Version: With clip-function and anti-tilt facility Material: Plastic Diameter: 0 Installation: For press fitting Dim. A Drilling depth Colour White Packing: 100 or 1,000 pcs. Black Dust grey Variofix connecting bolt for Ø5 drill hole Ø Meterial: steel Thread: Special thread Drive: PZ cross slot Screw fixing Plug-in fitting Thread length L Packing: 100 or 1,000 pcs. Packing: 100 or 1,000 pcs. Material 9.5 Steel Thread length L Material 9.5 Steel FF.48

50 Carcase Connectors RASANT-TAB Carcase and shelf connector Drilling depth Drill-in part Shelf 9.5 Wood thickness VARIANTA Special screw Screw-on support Plug-in support For plug fitting into Ø5 drilled hole Ø3 Ø Push drill-in part flush into Ø0 drilled hole The angled connecting surfaces of the drill-in and support parts pull the shelf tightly against the side panel Only the small base plate of the support part is visible after installation Ø Material: Zinc alloy support part, plastic drill-in part : Nickel plated or black support part, black drill-in part For wood thickness: 16 or 19 Installation: Plug-in Supplied with 1 Support part 1 Drill-in part For screw-fixing into Ø3 or Ø5 drilled hole Ø Ø Supplied with 1 Support part 1 Drill-in part For wood thickness Packing: 100 pcs. Material: Zinc alloy support part, plastic drill-in part : Nickel plated or black support part, black drill-in part For wood thickness: 16 or 19 Installation: For screw fixing Packing: 100 pcs. Dim. A Drilling depth For wood thickness Dim. A Drilling depth FF.49

51 Carcase Connectors ONEFIX One-piece connector Drilling depth 180 tightended When turning tensioning element in housing bolt spread bolt in drilled hole and thereby effected a friction-type connection of shelf and side panel. Easely press-in of housing by hand possible (for self-construction furnitures). Screwdriver is with tensioning angle of 15 free in area turnable. Area of application: Corner or construction connector for chip boards Material: High grade plastic For wood thickness from: 15 Dimension A: 7.5 Drilling depth: Version: With spreading bolt, connecting bolt not required Installation: For manually push-in and automatically press-in Drive: PZ cross slot, PH or flat blade Colour Brown White aluminium Black Beige White Packing: 100 or,000 pcs FF.50

52 Carcase Connectors Wood dowels Material: Beech Suitable for automatic feed Diameter Packing: 10 kg Length L Contents pcs/kg 5 5 approx.3, approx., approx.1, approx.1, approx.1, approx.1, approx approx approx approx approx approx approx approx approx Angle beadings Area of application: For strong corner joints and neat front edges, for glue fixing with cabinet clamp For mitre angle 90, plastic For mitre angle 90, laminated wood For mitre angle 90, plastic For mitre angle 90, plastic Area of application: Particularly suitable for thin panel wood components and chipboard panels Length Packing: 5 pcs. For wood thickness: 16 Length: 50 Packing: 50 pcs. Colour 1,000 Brown For wood thickness Dim. A Dim. B Natural colour FF.51

53 Connector Technology, Shelf Supports Carcase Connectors Wood biscuits, thickness 4 Size Groove depth Packing: 100 or 1,000 pcs. Length L Width B K 0 Straightening biscuits Information For any type ot biscuit connection, one or two K 0 straightening biscuits can be inserted between the wooden biscuits Area of application: For fixing and exact tightening of connected parts Material Plastic Packing: 1 or 50 pcs. Colour Red Thickness FF.5

54 Carcase Connectors Angled dowel Extremely solid connection, for large and heavy elements Quick and easy to process Can be separated by tightening with cross dowel Can be concealed by glue fixing The components can be aligned more accurately to each other due to the 90 angle Area of application: For large mitre-joint connections, e.g. beds, tables, counters and benches, from panel thickness 40, for solid wood and board material Installation: Drill hole in front edge of component. Push in angled dowel, position template and drill lateral hole.glue in angled dowel on one side, slide on counter part and tighten.the angled dowel can be screwconnected with the cross dowel on both sides for completely separable connections or for readjustment of the mitre. The mitre can be additionally bonded, e.g. during assembly, by pulling the components together using the cross dowel. Angled dowel with 1 cross dowel Cross dowel Drilling template Material Zinc alloy/ steel galvanized Steel galvanized MDF Packing pcs. 1 or or FF.53

55 Carcase Connectors Corner profile For simple, visually appealing corner connections: No clamping and forcing required due to the integrated harpoon-type flanges Decorative, visible finish of the corner joint with simultaneousedge protection provided by the bevel in the profile Many different usage areas, e.g. stores, exhibition standconstruction, panelling, plinth area, wall units and as lightweight edge protection Corner profile, round Area of application: For stable, permanent 90 mitre connections, for neat front edges, for solid wood and board material Material: Aluminium Installation: For press fitting into 3. groove, with harpoon-type fixing For wood thickness: From 19 Corner profile, with 3 bevel Corner profile, with 5 bevel Installation! Mill groove for the narrow surface. " Cut mitre, also taking.7 edge surface on the outer edges into consideration when using round corner profile. Cut corner profile to length and remove at least 1 cm of the harpoon-type flange at both ends. $ Press-fit corner profile into grooves, joining the workpieces together! " $ Note At least 1 cm of the harpoon-type flanges must be removed at both ends of a cut profile, otherwise it will not be possible to coat the narrow surface afterwards. It is advisable to coat the narrow surfaces and the groove with adhesive before press fitting the profile. FF.54

56 Carcase Connectors Round Length L Packing: 1 pc., With 3 bevel Length L Packing: 1 pc., With 5 bevel Length L Packing: 1 pc., FF.55

57 Connector Technology, Shelf Supports Carcase Connectors MAXIFIX 35 Worktop connector Drilling patten Material: Zinc alloy housing, steel bolt and segemental element : Housing bright, bolt and segmental piece galvanized Version: With pre-mounted bolt and segmental element For wood thickness: Min. 19 Drive: Hexagon socket, SW 6 Installation: Flush mounting with quick tension Supplied with 1 Connector housing MAXIFIX 35 1 Connecting bolt 1 Segmental element Length L Packing: 0 pcs. Drilling distance B Worktop connector Drilling distance : Galvanized Installation: Insert connector into table tops and tighten using screw wench Length L Packing: 50 or 00 pcs. Drilling distance B FF.56

58 Connection Fittings Two-piece dowel connector, plug-in For press fitting with nylon bushing Two-piece Three-piece Drilling pattern Colour: Natural coloured For drilling hole Ø: 10 Ø Version Two-piece Three-piece Packing: 100 or 1,000 pcs. For drilling hole D Ø With dowel headed screw and centring pin, -part Mateial: Steel dowel headed screw, nylon sleeve : Galvanized dowel headed screw, brown sleeve For drilling hole Ø: 8 Installation Door panel connecting bolt, for knocking in Installation Spacer plate Door panel connecting bolt Ø: For drilling hole D Ø Packing: 100 pcs. Material Steel Packing: 100 or 1,000 pcs. Chromatized FF.57

59 Connection Fittings Spacer plate for providing the required gap between the door and the panel Material Plastic Packing: 100 pcs. Sleeve with internal threaded for drilled through-hole Ø5 Ø : Galvanized Colour Transparent For drilling hole Length L Ø Packing: 100 or 1,000 pcs. Threaded screw M4 for drilled through-hole Ø5 Ø : Nickel plated Type of head: Countersunk head Drive: PZ cross slot and and flat blade Length L Packing: 100 or 1,000 pcs. Countersunk head threaded sleeve for drilled through-hole Ø5 Ø : Nickel plated Drive: PZ cross slot and flat blade Length L Packing: 100, 500 or,000 pcs. For wood thickness FF.58

60 Connection Fittings Connecting screw and sleeve with M6 thread -pieces Material: Connecting screw steel with plastic head : Bright Drive: Flat blade Length L Packing: 100 pcs. For wood thickness White White Head colour Flat head screw without tip with M6 thread Drive: Size 4 hexagon socket SW4 Length L 60 Nickel plated Packing: 100 or 1,000 pcs Sleeve nut SW4 hexagon socket With Pan head Nickel plated With flat head Nickel plated Packing: 100 or,000 pcs FF.59

61 Connector Technology, Shelf Supports Connection Fittings Connecting brackets Universal brackets For 5 series drilled holes For 3 series drilled holes Area of application: For connecting cabinet elements, for attaching rear panels, for inset and surface mounted furniture part Installation: For screw fixing, cover cap for pushing on (for universal bracket for 3 series drilled holes) Version Material For 5 series drilled holes Universal bracket Steel For 3 series drilled holes Universal bracket Cover cap Packing: 50 or 00 pcs. Steel Bright galvanized Bright galvanized Plastic Brown Plastic coated white White aluminium White For 3 series drilled holes, plastic coated white Bracket : Galvanized Material thickness: Angle: 90 Dimension Packing: 1 pc. 40 x 40 x FF.60

62 Connection Fittings Brackets : Galvanized Material thickness: Angle: 90 Dimension 40 x 40 x x 50 x x 75 x Packing: 1 pc. : Nickel plated Version With Slots Packing: 1 or 50 pcs Profile plate for machined-recess installation Area of application: As bed or sofa frame connectors : Bright Insatllation: For machined-recess installation and screwing, for hooking onto raised head countersunk chipboard screws Height For hooking onto screw 46 Ø Packing: 100 or 00 pcs. FF.61

63 Connection Fittings MODULAR Connection fitting for recess mounting Installation : Burnished Installation: For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid release fastenings Min. wood thickness Packing: 100 or 1,000 pcs. Length L Width B Milling depth ± ± ± Semi locking, for semi-permanent fastings For push-fitting, for shelves Installation MODULAR for shelves MODULAR for rapid release fastenings Min. wood thickness Packing: 100 or 1,000 pcs. For front fitting, a MODULAR fitting for rapid release fastenings ( ) is recoended. The plate should allways be installed so that the supporting plate butts against the end of the recess. Packing: 100 or 1,000 pcs. Length L Width B Milling depth ± Min. wood thickness Length L Width B Milling depth ± FF.6

64 Connection Fittings MODULAR Connecting screws : Galvanized For one-sided installation in wood For Modular plate width Packing: 100 or 500 pcs. For drilled hole Thread length L Ø Ø For double-sided installation in wood Wood thickness For Modular plate width Packing: 100 or 500 pcs. For wood thickness For installation in metal, with self-tapping thread For Modular plate width Packing: 100 or 500 pcs. For drilled hole Thread Ø4. Ø3/ Ø5. Ø7/ FF.63

65 Connector Technology, Shelf Supports Connection Fittings MODULAR Connecting screws For screw fixing to rear panel Can also be secured with chipboard screw Ø 3.5 Ø Material/ Plastic white Packing: 100 or 500 pcs Rear panel connector Installation Area of application For attaching two rear panels to a centre panel Material/ Steel bright Packing: 100 or 1,000 pcs FF.64

66 Connection Fittings Rear panel connecting profile For 5 thick rear panels Area of application: For connecting separate rear panel sections Length:,500 Installation Material/ Plastic white Packing: 1 pc For 8 thick rear panels, with harpoon fixing Installation: For recess installation in centre panel Length:,500 Installation Material/ Plastic white Packing: 1 pc FF.65

67 Connection Fittings Connector components For concealed applications For solid, reinforcing connections For retrospectively stabilising high and bulging components For installation without tools For wood thickness: min. 19 Application For midway mounting For shelf installation For shelving and cabinet construction For frequent assembly and disassembly (easy to dismantle) Installation reference Set depth of shelf by tightening the rear sleeve more firmly. If necessary add a depth stop to the structure. The firmer the screws of the dovetail sleeve are tightened, the more difficult it is to slide in the shelves and remove them again. Installation 1. Mill groove for rail in front edge of shelf, 10.5 x 1 (H x W). Insert rail and fix with screws. Recoendation: 1 Fixing screw 3 with countersunk head at approx. 00 intervals.. Attach dovetail sleeve with 3 countersunk head screw (head Ø <6 ) on opposite side. Recoendation: 6 sleeves per metre. 3. Push-in resistance of rail via tightening torque (screw connection strength) of dovetail sleeve. 4. Slide shelf onto side panel and slide rail onto sleeves. Ø FF.66

68 Connection Fittings Rail with dovetail groove Material: Aluminium : Bright 115, 95 and 595 rail details Length 115 Length 95 Rail, not drilled Rail, pre-drilled and countersunk, at intervals of 150 Rail, pre-drilled and deburred Packing: 1 or 10 pcs. Length 3, , Length 595 Dovetail sleeve for screw fixing Processing aid drilling jig with countersink cutter Material/ Plastic white Packing: 0 or 100 pcs. Version: With countersink cutter, with hardened insert Material Plastic Packing: 1 pc FF.67

69 Connector Technology, Shelf Supports Connection Fittings Keku Suspension fittings Information The at KEKU constitutive room system KEKU R (shop fittings) you will find in section 11. Area of application: For fastening panels to frame sructures Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC Note Do not treat with chemical solutions or aggressive greases. Do not adjust by haering. EH Frame component For screw-fixing to substructures Installation For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs. For groove mounting and screw-fixing to substructures Installation For installation with Countersunk chipboard screws Ø4.0 Ø Packing: 00 pcs FF.68

70 Connection Fittings EHS Frame component, for screw-fixing to substructures, with side guide Installation: For screw-fixing to substructures with Ø4 chipboard screws or VARIANTA Ø3 or Ø5 special screws Installation Ø Ø Ø Function The side guide 1 Prevent the workpiece from slipping sideways Keep the workpiece edge parallel 3 Creates a lateral connection in conjunction with the panel For installation with Chipboard screws with countersunk head Ø4.0 Ø Varianta countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs Panel component with lip Panel component without lip for panels that are frequently removed For installation with Chipboard screws with countersunk head Ø 4.0 Ø Varianta countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs. Note The combined use of panel components with and without lip reduces the overall snap-in function. For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs FF.69

71 Connection Fittings KEKU Push-in fittings Note Do not treat with chemical solutions or aggressive greases. Do not adjust by haering. Not for suspended loads such as ceiling panel. Area of application: For fastening panels to frame sructures Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC AS Frame component for screw-fixing to subframes Installation For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs ASR Frame component for screw-fixing to subframes Installation For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs FF.70

72 Connection Fittings AS Panel component for screw- fixing to panels For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs KEKU AD Double partition fitting Double partition fittings are used for: Attaching sound insulating material to door leaf Constructing cavity-type doors Double partitions on carbinet sides in door alcoves Connecting frame elements Linking elements Constructing sandwich elements Installing lightweight partition Mounting wall elements (carbinet construction) Door installation as panel construction Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC AD 15 Angeled component for panel distance of 15, screw-fixing to subframes Installation Note Do not treat with chemical solutions or aggressive greases. Do not adjust by haering. For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs FF.71

73 Connection Fittings AD 30 Angeled component for panel distance of 30, screw-fixing to subframes Installation For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs Panel component with lip, for screw-fixing to panels For installation with Chipboard screws with countersunk head Ø4.0 Ø VARIANTA countersunk head Ø3.0 or Ø5.0 special screws Ø Ø Packing: 00 pcs EH Spacer plate 1.5 For installation with HOSPA Chipboard screws VARIANTA Countersunk screws Packing: 400 pcs FF.7

74 Connection Fittings Angled bracket : Galvanized Material thickness: 1.4 Angle: 90 Dimension Packing: 1 pc. x 5 x Bed fitting with cranked hook-in part Installation Mounting: Left and right hand Striking plate (Height 100 ) Hook-in part (Height 100 ) Striking plate Hook-in part (Height 130 ) (Height 130 ) Installation: For screw fixing Supplied with (per unit) 4 Striking plates 4 Hook-in parts Height Packing: 10 or 30 pcs. 100 Yellow galvanized Chromatized 130 Yellow galvanized Chromatized FF.73

75 Connection Fittings Bed fitting for beds with central tie bar, disengageable Installation: For screw fixing Supplied with 1 Supporting bracket 1 Retaining plate Chromatized Packing: 10 or 100 pcs Bed plinth connector for single and double beds For plinth thickness of 19 For plinth thickness of 3 Installation : Galvanized Mounting: For right and left hand use Installation: For screw-fixing Order reference: Please order connecting screw and wing nut separately. Plinth thickness Packing: 1 or 40 pcs. Connecting screw Bed side panel Bed plinth connector Bed plinth Wing nut FF.74

76 Connection Fittings For central-tie bar and slatted frame supports, height adjustable Area of application: For single and double beds as slatted bed/sofa frame or central tie-bar support Adjustment facility: Three-stage vertical adjustment, 4 attachment positions Installation: For screw fixing Installation When use on double beds with a 35 thick central tie-bar, the mounting plates must be mounted on the headboard and foot section 5 higher as those on the side panels, the supporting surfaces of the bracket and the central tie-bar must be at same level. Supplied with 1 Mounting plate 1 Supporting bracket Height Packing: 0 pcs. Material 140 Steel Yellow chromatized FF.75

77 Connection Fittings Flexible stabilizer profile Area of application: For base structures, for use as construction aid for stable lightweight construction elements Material: Hollow profile: Aluminium, upper/lower layer: Plywood Allows easy manufacture of lightweight and curved components For lightweight and stable base structures Moulds are not required. Freeform shapes according to drawings (1:1) or full-scale drawings on panel are possible. Easy to copy existing shapes, e.g. columns on site. Many shapes and raduis possible Extremely light due to its low weight Extremely stiff element after applying the lower/upper layer Allows easy manufacture of lightweight and curved components Basic profile for standard application Layer outside: min. internal radius = 100 Note Workpiece with two glued-on profiles for higher strength Layer inside: min. external radius = 00 For safe processing use assembly adhesive Installation The required shape can be achieved by bending into any shape in accordance with drawing or full-scale drawing on panel or copying an existing shape. Please note min. internal radius of 100 and min. external radius of 00. Apply assembly adhesive and join components. Use clamps for fixing into required shape. Further processing is possible after 4 h, final strength is achieved after 48 h. Pre-fixing with hot melt adhesive (or similar) can reduce the waiting time between fixing and further processing. Assembly adhesive must be used to achieve a strong structure. In order to produce an extensive element, several flexible stabilizer profiles are required as base structure. Assembly adhesive application Length L Supplied with Components are clamped into required shape, profiles, 10 upper/lower layers,950 4 profiles, 4 upper/lower layers FF.76

78 Shelf Supports Shelf supports Shelf supports are used for fixing and securing shelves made from wood and wooden materials, glass or plastic, e.g. in cabinets and masonry Shelf supports that meet these specific requirements, e.g. for lightweight panel construction, concealed installation and shelf support with safety function, are available for any purpose. Shelf supports are plug fitted or screwed into the support element and are available in different materials and finishes. For placing shelves on Designed for use in furniture (e.g. cabinet equipment, shelving), without safety facility to prevent the shelf from tipping and being pulled out For placing the shelf on or inserting and securing the shelf Designed for use in furniture (e.g. cabinet equipment, shelving), with safety facility (shelf fixing lugs or tightening and clamping) to prevent the shelf from tipping and being pulled out Brackets and shelf support with clamp are used mainly for installation on masonry. The shelf is secured by clamping and additional screw fixing or direct fixing with screws to the fitting. For concealed installation of the shelf The supports for concealed installation in furniture are called Swedish type shelf supports. A groove is milled into the shelf and the support is inserted in two drill holes. This fitting therefore secures the shelf against tipping. These shelf supports are used to install a shelf "floating" in masonry, i.e. without visible fittings. The shelf requires drill holes and recesses for the fitting which is anchored to the wall. FF.77

79 Shelf Supports Shelf supports made of steel For drilled hole Ø3, load carrying capacity 60 kg Ø Bright galvanized Packing: 500 or 5,000 pcs Nickel plated Packing: 500 or 5,000 pcs Nickel plated Brass plated Packing: 500 or,000 pcs Nickel plated Packing: 500 or 5,000 pcs For drilled hole Ø4, load carrying capacity 60 kg Ø Swedish-type shelf support for insertion into two drilled holes Nickel plated Packing: 100 or 000 pcs. Area of application: For invisible mounting of grooved shelves wire Length L Packing: 10 or 100 pcs Nickel plated FF.78

80 Shelf Supports For drilled hole Ø5, load carrying capacity 80 kg Ø Nickel plated Packing: 500 or 5,000 pcs Bright galvanized Burnished Packing: 500, 1,000 or 5,000 pcs Nickel plated Packing: 500 or,000 pcs Nickel plated Packing: 100, 500, 1,000 or,000 pcs Shelf Support Nickel plated Sleeve for drilled hole Ø5 Ø Spreading dowel, brass, length 8 Packing: 100, 500, 1,000 or 3,000 pcs. Version: With catch nose as anti-slip protection Nickel plated Packing: 500 or,000 pcs FF.79

81 Shelf Supports Shelf supports made of steel For drilled hole Ø7 or 7.5 (with sleeve), load carrying capacity 100 kg Ø Brass plated Nickel plated Packing: 100 or 1,000 pcs Sleeve Area of application: For mounting shelf support into drilled holes Ø7.5 Ø Brass plated Nickel plated Packing: 100 or 500 pcs Shelf supports made of zinc alloy For drilled hole Ø5, load carrying capacity 75 kg Ø Tightening in drilled hole Shelf securing: With lugs Installation: Easy insertion and tightening with 180 turn; prevents surface damage around drilled hole Tension and spreading stabilise the carcase Nickel plated, clamping screw bright Packing: 100, 500 or,000 pcs FF.80

82 Shelf Supports Shelf supports made of zinc alloy For drilled hole Ø5, load carrying capacity 15 kg Ø Version: With twin grooves Nickel plated Packing: 500 or,000 pcs Version: With twin grooves Shelf securing: With lugs Nickel plated Black Packing: 100 or 500 pcs Version: With twin grooves Shelf securing: With lugs Screw fixing, load carrying capacity 60 kg Nickel plated Packing: 500 or,000 pcs. Version: With cap Also suitable for glass shelves Nickel plated Packing: 100 or 1,000 pcs FF.81

83 Shelf Supports Shelf supports made of plastic For drilled hole Ø5, load carrying capacity 75 kg Ø Shelf securing: With chipboard screws with countersunk head Ø3 Ø Colour Transparent Brown Packing: 500 or 1,000 pcs Shelf securing: With clamping spring Colour Transparent Packing: 500 or 1,000 pcs For drilled hole Ø5, load carrying capacity 80 kg Ø pin : Galvanized pin Colour Transparent White Packing: 500 or 3,000 pcs FF.8

84 Shelf Supports Shelf supports made of plastic For drilled hole Ø8, load carrying capacity 60 kg Ø pin Installation: Knock in Colour White Brown Packing: 500 or 5,000 pcs Glass shelf supports made of zinc alloy For drilled hole Ø3 or 5, with GC lifting safeguard/clamp Ø For glass thickness: 6 and 8 The lifting safeguard/clamp prevents unintentional tilting, lifting and removal of glass shelves For drilled hole Ø5, with rapid-action clamping, GC lifting safeguard/clamp Ø Tightening in drilled hole Nickel plated Packing: 0 or 500 pcs. For glass thicknesses: 6 and 8 Installation: Easy insertion and tightening with 180 turn; prevents surface damage around drilled hole The lifting safeguard/clamp prevents unintentional tilting, lifting and removal of glass shelves Nickel plated Packing: 0 or 500 pcs FF.83

85 Shelf Supports Glass shelf supports made of zinc alloy For drilled hole Ø5, plug-in, with twin grooves Ø With narrow glass supporting surface With wide glass supporting surface With narrow glass supporting surface Nickel plated With wide glass supporting surface Nickel plated Packing: 500 or 1,500 pcs For drilled hole Ø5, plug-in Ø : Pin nickel plated Version: With anti-twist protection at pin Length L 10.0 Black plastic overlay Glass shelf support made of steel For drilled hole Ø5, round, with cap Ø Packing: 100, 500 or 3,000 pcs. Galvanized, cap transparent Packing: 500 or 1,000 pcs FF.84

86 Shelf Supports Glass shelf supports made of steel For drilled hole Ø3, round, with locking screw Ø For screw-fixing Material: Plastic locking screw : Locking screw transparent For glass thickness of: 6 10 Shelf securing: With locking screw For press fitting Nickel plated Packing: 0 or 100 pcs For drilled hole Ø5, round, with locking screw Ø For glass thickness of 9 Material: Plastic locking screw : Locking screw black Shelf securing: With locking screw Mounting instructions: Must be mounted with the locking screw on the top For glass thickness of 13 For glass thickness of 9 Nickel plated For glass thickness of 13 Nickel plated Packing: 0 or 100 pcs FF.85

87 Shelf Supports Shelf support system for knocking into groove 9.5 x 4 Shelf support strip with apertures at 15 intervals Installation Material Plastic Packing: 1 pc. Colour White Length m Shelf support with support Material Plastic Colour White Packing: 100 or 1,000 pcs Shelf support for grooving shelves, special Shelf securing: By grooving shelves Installation Material Plastic Packing: 100 pcs. Colour Transparent FF.86

88 Shelf Supports Shelf support system for knocking into 11 x 5 groove Shelf support strip with apertures at 5 intervals Material Aluminium Bright Packing: 1 pc. Silver coloured anodized Gold coloured anodized Length m Shelf support Material Aluminium Packing: 100 or 1,000 pcs. Bright Silver coloured anodized Gold coloured anodized Shelf support system for screw fixing, dimensions 16 x 6 Shelf support strip with apertures at 14 intervals Shelf support Material Steel Packing: 1 pc. Material Steel Nickel plated Packing: 100 or 1,000 pcs. Galvanized Length m FF.87

89 Shelf Supports Shelf support system for screw fixing, dimensions 0 x 8 Shelf support strip with apertures at 14 intervals Material Aluminium Packing: 1 pc. Silver coloured anodized Length 3.5 m Shelf support Material Aluminium Packing: 100 pcs. Silver coloured anodized Shelf support system for screw fixing, dimensions 10 x 5 Shelf support strip with apertures at 15 intervals Shelf support Material Steel Packing: 1 pc. Material Steel Nickel plated Galvanized Packing: 100 or 1,000 pcs. Length 3.5 m FF.88

90 Shelf Supports Shelf support for invisible installation, with mounting plate Version: With mounting plate Shelf thickness: Min. 4 For shelf depth: Max. 300 Load bearing capacity: kg/m Height adjustment: Via elongated holes in mounting plate Tilt adjustment: Via supporting bolt Installation: For screw fixing (concealed fixing in wooden carcases or masonry walls) Drilling and milling dimensions in shelf Installation Mounting plate Shelf Load bearing capacity (with shelf support spacing = Max. 700 and evenly distributed load) Wooden carcase Supporting bolt Shelf depth Max. load bearing capacity kg/m Material Steel Packing: or 0 pcs. Galvanized FF.89

91 Shelf Supports Shelf support for invisible installation, with mounting plate and side adjustment Version: With mounting plate and eccentric sleeve For shelf thickness: Min. 4 For shelf depth: Max. 300 Load bearing capacity: kg/m Tilt adjustment: Via adjusting screws Height adjustment: Via elongated holes in mounting plate Side adjustment: Via supporting bolt, stop of side adjuster with eccentric sleeve (Plastic black) Installation: For screw-fixing and mounting in drilled hole (concealed fixing in wooden carcase or masonry with frame plug) Drilling and milling dimensions in shelf Installation Mounting plate Load bearing capacity (with shelf support spacing = Max. 700 and evenly distributed load) Shelf depth Max. load bearing capacity kg/m Material Steel Packing: or 0 pcs. Wooden carcase Galvanized Supporting bolt FF.90

92 Shelf Supports Shelf support for invisible installation, with mounting plate and side adjustment : Galvanized Version: With mounting plate For shelf thickness: Min. 4 For shelf depth: Max. 300 Drilling and milling dimensions in shelf Load bearing capacity: kg/m Tilt adjustment: Via adjusting screws Height adjustment: Via elongated holes in mounting plate Side adjustment: Via supporting bolt Installation: For screw-fixing and mounting in drilled hole (concealed fixing in wooden carcase or masonry with frame plug) Load bearing capacity (with shelf support spacing = Max. 700 and evenly distributed load) Installation Mounting plate Shelf Shelf depth Max. load bearing capacity kg/m Dimension A Wooden carcase Supporting bolt Length L Shelf Packing: 1 or 0 pcs. FF.91

93 Shelf Supports Shelf support with wooden thread and frame plug, nylon eccentric sleeve and frame plug : Galvanized, eccentric sleeves black, frame plug grey For shelf depth: Max. 300 Load carrying capacity: kg/m Height and Tilt adjustment: With eccentric sleeves Installation: For mounting in drilled holes (concealed fixing in masonry) Sizes in brackets for shelf thickness of and above Drilling and milling dimensions in shelf Installation Frame plug Eccentric sleeve Load bearing capacity (with shelf support Shelf depth Sizes in brackets for shelf thickness of and above spacing = Max. 700 and evenly distributed load) Max. load bearing capacity kg/m Supplied with 1 Support bolt Pre-mounted eccentric sleeves 1 Washer 1 S8H 80R FISCHER Frame plug Min. shelf thickness Eccentric Ø Ø U-disk Hight and tilt adjustment Supporting bolt ± ± Packing: 0 pcs. FF.9

94 Shelf Supports Glass shelf support Ø1 Ø grub screw, plastic dowel Features: Solid support Load bearing capacity: Max. 80 kg/m Height adjustment: ±4, by turning the support bolt Installation: For screw fixing Installation Max. distance of shelf support: 700 Dowel Washer 6 Glass shelf Support with head ± Supplied with 1 Support with head 1 Washer 1 Grub screw M6 x 50 1 S8 Dowel 1 Installation instruction Material Stainless steel Packing: 1 pc. Matt brushed FF.93

95 Connector Technology, Shelf Supports Shelf Supports Shelf supports with clamps Area of application: For shelfs made of glass or wood Material: Zinc alloy Installation: For screw-fixing Note Load bearing capacity of shelf support with clamps The load bearing capacity depends on: Shelf material Shelf depth Type of attachment panel It is therefore impossible to specify a binding load bearing capacity. Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 6 x 18 x 4.0 Stainless steel coloured Chrome plated polished x 37 x 4 x 5.7 Stainless steel coloured Chrome plated polished Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x x 5 x 3.0 Stainless steel coloured Chrome plated polished x 6 x 8 x 3.5 Stainless steel coloured Shelf thickness Dim. (W x D x H x T) x 17 x 16 x 3.3 Stainless steel coloured Chrome plated polished x 1 x 18 x 3.8 Stainless steel coloured Packing: or 0 pcs. Chrome plated polished FF.94

96 Shelf Supports Shelf supports with clamps Shelf thickness Dim. (W x D x H x T) x 5 x 5 x 0 Stainless steel coloured Packing: or 0 pcs. 55 x 55 x 5 x 18 Stainless steel coloured Chrome plated polished Shelf thickness Dim. (W x D x H x T) x 34 x 3 x 4.0 Stainless steel coloured Packing: or 0 pcs Shelf thickness Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) Dim. (W x D x H x T) x x 14.5 x 4.0 Stainless steel coloured Chrome plated polished 40 x 30 x 14.5 x 4.3 Stainless steel coloured Chrome plated polished x 36 x 16 x 4.5 Stainless steel coloured Packing: or 0 pcs. Chrome plated polished 8 45 x 47.5 x 4 x 15.5 Stainless steel coloured Chrome plated polished FF.95

97 Shelf Supports Shelf supports with clamps Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 30 x 18 x 3.5 Stainless steel coloured Chrome plated polished Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) 8 60 x 63 x 6.5 x 9.5 Stainless steel coloured Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) 8 10 x 3 x 9 x 5.0 Stainless steel coloured Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) Chrome plated polished x 40 x 30 x 4.0 Stainless steel coloured Chrome plated polished x 47 x 34 x 4.0 Stainless steel coloured FF.96

98 Shelf Supports Shelf supports with clamps Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 54 x 47 x 4.5 Stainless steel coloured Chrome plated polished x 69 x 48 x 4.5 Stainless steel coloured Chrome plated polished x 105 x 75 x 7.0 Stainless steel coloured Chrome plated polished Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 40 x 41 x 4.8 Stainless steel coloured Chrome plated polished Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 5 x 18 x 7.5 Stainless steel coloured Chrome plated polished Aluminium FF.97

99 Shelf Supports Shelf supports with clamps Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 37 x 36 x 5.0 Stainless steel coloured Chrome plated polished Aluminium Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 35 x 48 x 7.0 Stainless steel coloured Shelf thickness Packing: or 0 pcs. Dim. (W x D x H x T) x 7 x 45 x 5.0 Chrome plated polished x 35 x 57 x 5.0 Stainless steel coloured Chrome plated polished Aluminium FF.98

100 Shelf Supports Shelf supports with clamps W Shelf thickness Dim. (W x D x H x T) 4 5 x 35 x 43 x 5.0 Stainless steel coloured Chrome plated polished x 45 x 53 x 5.0 Chrome plated polished Packing: or 0 pcs. Shelf thickness Dim. (W x D x H) x 80 x 3 Stainless steel coloured Packing: pcs. FF.99

101 Shelf Supports Designer brackets The specified load bearing capacity applies: Only when used in pairs With even load distribution (surface loads) With proper and reliable attachment to the wall The fixing method depends on the wall material: Please check screws and wall plugs in accordance with the type of wall (use other fixing material if necessary). Load bearing capacity 40 kg per pair Area of application: For wooden shelves Material: Zinc alloy Installation: For screw fixing to support element, shelf for screw fixing Dim. A Packing: pcs. Dim. B Dim. C Stainless steel coloured Chrome plated polished Aluminium coloured FF.100

102 Shelf Supports Load bearing capacity 150 kg per pair Area of application: For wooden shelves Material: Zinc alloy Installation: For screw fixing to support element, shelf for screw fixing Supplied with Brackets including accessories and fixing material For shelf thickness Packing: pcs. Dim. A Dim. B Dim. C Chrome plated polished Nickel plated matt Note Load bearing capacity with professional fixing to concrete wall (concrete quality B55). The suitability of the fixing material must be tested by the user. Load bearing capacity approx. 40 kg per pair Area of application: For wooden and glass shelves Material: Zinc alloy For shelf thickness 6 1 (glass), 38 4 (wood) Packing: pcs. Note Dim. A Max. shelf depth 60 Dim. B Dim. C Nickel plated Aluminium coloured FF.101

103 Shelf Supports Shelf supports with clamps Shelf thickness Packing: pcs. Dim. (W x D x H) x 60 x 3 Stainless steel coloured Aluminium coloured Shelf thickness Dim. (W x D x H) x 180 x 55 Stainless steel coloured Packing: pcs. Aluminium Shelf thickness Dim. (W x D x H) x 140 x 48 Stainless steel coloured Packing: pcs. Aluminium FF.10

104 Shelf Supports Shelf supports with clamps Shelf thickness Packing: pcs. Dim. (W x D x H) x 65 x 3 Chrome plated polished Glass shelves Area of application: For installation in cabinets from board thickness Version: With polished edges Features: 6 thick, clear, tempered Cabinet width Dim. (L x W) x x x , x Packing: 1 pc. per pack Area of application: For use with wall mounted shelf supports Version: With polished edges Features: 8 thick, tempered 8 Version Etched border Clear Packing: 1 pc. per pack Dim. (L x W) 793 x FF.103

105 Shelf Supports Glass shelves Area of application: For corner cabinets Version: With frosted glass Features: 8 thick, tempered 8 Version Etched border Clear Packing: 1 pc. per pack Radius Shelf brackets Load bearing capacity kg per pair Fixing with chipboard screws Load bearing capacity kg Dim. (A x C) Dim. B Dim. D Brown coated White coated Black coated x x x x x x x Packing: or 10 pcs. FF.104

106 Shelf Supports Fixed brackets Load bearing capacity kg Material 0 Steel Packing: 1 set incl. fixing material Dim. (W x D x H) 85 x 190 x 40 Black coated White coated Load bearing capacity kg Material 0 Steel Packing: 1 set incl. fixing material Dim. (W x D x H) 5 x 30 x 30 Grey coated White coated Black coated Load bearing capacity kg Material 0 Steel Packing: 1 set incl. fixing material Load bearing capacity kg Material 0 Steel Packing: 1 set incl. fixing material Dim. (W x D x H) 5 x 30 x 30 Grey coated Dim. (W x D x H) White coated Black coated 5 x 30 x 30 Grey coated White coated Black coated FF.105

107 Shelf Supports Fixed brackets Load bearing capacity 150 or 500 kg per pair Top fixing holes Fixing holes for wall mounting Load bearing capacity kg Dim. (A x C) Dim. B Dim. D Dim. E Grey primed x x x x x x x x x x x x x Packing: 0 pcs. Folding brackets Load bearing capacity 0 kg per pair Function To raise bring the support ing arm upwards and allow to engage. To fold down slightly raise suppoerting arm and push locking arm backwards. Load bearing capacity kg Dim. (W x D x H) White coated Black coated 0 30 x 00 x x 300 x x 400 x Packing: 1 set incl. fixing material FF.106

108 Shelf Supports Folding brackets Load bearing capacity 40 kg per pair : Yellow chromatized Version: With locking mechanism and spring loaded support Function: Press integral button to fold down Top fixing holes Fixing holes for wall mounting Load bearing capacity kg Dim. (A x C) Dim. B x x Packing: or 10 pcs. Load bearing capacity 100 kg per pair : White coated bracket, galvanized support Version: With locking mechanism Function: To raise bring the supporting arm upwards and allow to engage. To fold down slightly raise supporting arm and push locking arm backwards. Top fixing holes Fixing holes for wall mounting Dim. (A x C) Dim. B 00 x x x Packing: pcs. FF.107

109 Shelf Supports Folding brackets Load bearing capacity 150 kg per pair Version: With locking mechanism Function: The folding brackets automatically lock when raised. To fold down slightly raise locking arm. Top fixing holes Fixing holes for wall mounting Dim. (A x C) Dim. B Dim. D Grey primed 330 x x x x x Packing: 1 pc. Load bearing capacity 150 kg per pair Version: With locking mechanism adjustable in 3 positions Adjustment facility Top fixing holes Fixing holes for wall mounting Position 1 = 90 Functionality Dim. (A x C) Dim. B Dim. D White coated Galvanized 300 x x Packing: pcs. Position = 80 Position 3 = 70 Position 4 = 0 To raise bracket lift support arm and allow to engage at required position. To fold down bracket lift support arm and release locking mechanism. FF.108

110 Shelf Supports Folding brackets Load bearing capacity 300 kg per pair Control curve Locking bolt Function To raise lift support arm and push in. To fold down lift support arm pull forward Top fixing holes Fixing holes for wall mounting Version: With locking mechanism Dim. (A x C) Dim. B Dim. D Brown coated 360 x x x x Packing: pcs. Load bearing capacity 500 kg per pair Version: With locking mechanism Top fixing holes Fixing holes for wall mounting Function: The folding brackets automatically lock when raised. To fold down slightly raise locking arm. Dim. (A x C) Dim. B Dim. D Grey primed 40 x x x x x Packing: 1 pc. FF.109

111 Shelf Supports Bench brackets TIKLA Folding, load bearing capacity 500 kg per pair Installation Max. panel thickness 45 Material Steel Packing: 1 or pcs. Dim. (A x C) Dim. B Dim. D Bright galvanized 360 x Top fixing holes Fixing holes for wall mounting Bracket for table extension Load bearing capacity 30 kg per pair For extending of tables and work plates When opening locks the spring flap bracket automatically Area of application: For extending of tables and work plates Load bearing capacity: 30 kg Version: Folding, with automatically locking when opening Dim. A Dim. B Dim. C Bright galvanized Packing: or 10 pcs. FF.110

112 Shelf Supports Bracket for small electrical appliances Fixed, load bearing capacity 40 kg per pair Area of application: For mounting small electrical appliances to the wall, e.g. microwave oven, HiFi system Version: With depth adjustment Supplied with 1 Bracket 1 Set of fixing material Dim. A Packing: 1 or 6 pcs. Dim. B Dim. C White FF.111

Connector Technology, Shelf Supports

Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and

More information

Material Packing Brown Grey Pine Black White

Material Packing Brown Grey Pine Black White RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24

More information

Connector Technology, Shelf Supports Connection Fittings

Connector Technology, Shelf Supports Connection Fittings MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

X-Board Plus is designed for the following built environments: Residential: Commercial Office: Other :

X-Board Plus is designed for the following built environments: Residential: Commercial Office: Other : X-Board Plus sets a new benchmark in environmentally responsible board manufacture. XB+ boards contain up to 85% post-consumer, recycled paper waste, reducing weight and allowing thicker gauge boards to

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

Program overview Group 8

Program overview Group 8 Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet

More information

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery

More information

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories

More information

Hinges and Flap Fittings Information

Hinges and Flap Fittings Information Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,

More information

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA 4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE

More information

www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles

More information

Kitchen Fittings Hanging Cabinets and Accessories

Kitchen Fittings Hanging Cabinets and Accessories Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting

More information

Bathroom Installation Guide

Bathroom Installation Guide Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate

More information

Hardware Fitting Accessories Accessories

Hardware Fitting Accessories Accessories Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap

More information

Furniture Fittings Concealed Hinges

Furniture Fittings Concealed Hinges Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)

More information

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door

More information

Interior Equipment, Shop Fittings

Interior Equipment, Shop Fittings Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting

More information

Connecting technology Summary of ranges

Connecting technology Summary of ranges Connecting technology Summary of ranges Lightweight connecting fittings Summary 758-759 Connecting fittings for carcases Summary 768-769 Other connecting fittings Summary 798-799 Adjustment systems for

More information

Programme overview Group 8

Programme overview Group 8 Programme overview Group 8 8.1 Fittings for lightweight boards i Range summary 8.1.0 8.2 Connecting fittings i Range summary 8.2.0-8.2.1 8.3 Fittings for beds and upholstered furniture i Range summary

More information

www.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile

More information

Technical Product Description

Technical Product Description Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on

More information

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step

More information

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120

More information

Dowelling joints with VS 600

Dowelling joints with VS 600 No. 112 Dowelling joints with VS 600 A Description Dowelling joints with round dowels (in addition to flat dowels) are part of the standard wood joints in furniture manufacture. This joint is very stable.

More information

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with

More information

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

Installation Instructions

Installation Instructions Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l

SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l T h e a l l p u r p o s e c o n s t r u c t i o n k i t SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe

More information

Technical Documentation Lift Advanced

Technical Documentation Lift Advanced Technical Documentation Lift Advanced 1 1 Introduction... 4 2 Basic Information... 5 2.1 Hinge Recommendations... 5 Lift Advanced HF... 5 Lift Advanced HK... 5 2.2 Usage of Aluminium Fronts... 5 19mm Aluminium

More information

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing

More information

CDAS CDAS39 SHELF UNIT

CDAS CDAS39 SHELF UNIT BY CDAS CDAS39 SHELF UNIT 0708 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process

More information

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.

More information

INSTALLATION MANUAL FORTRESS SERIES

INSTALLATION MANUAL FORTRESS SERIES Guardian Security Structures TEL 1-406-212-2334 EMAIL rg@gssdoors.com WEB www.gssdoors.com FORTRESS SERIES GENERAL INSTALLATION GUIDELINES 1. The door frame is installed using 16 bolt screws 7,5 mm in

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer

More information

Tried-and-tested quality.

Tried-and-tested quality. Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.

More information

FABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems

FABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC

More information

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax:

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax: Devlila Apts., Shop No. 8, Fatema Nagar, Pune 411013 Tel.: +91-20-56613638 Fax: +91-20-26812777 E- mail: sales@hanfas.com www.hanfas.com Product Catalogue Sliding Door Fittings Bottom Roller & Guide PVC

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Robert Bosch GmbH. Minimalist washstand

Robert Bosch GmbH. Minimalist washstand Minimalist washstand Neat and tidy Minimalist washstand Minimalist design in the bathroom is in fashion. And rightly so, as this washstand proves: because less is more! 1 Introduction Here s an idea to

More information

compile system INSTALLATION GUIDE Updated January 2019

compile system INSTALLATION GUIDE Updated January 2019 INSTALLATION GUIDE Updated January 09 compile system Table of Contents Panels 0 Quick Connect Clips 0 Lock Clips 0 Panel Trims 0 Privacy Glass 0 Post Base Covers 04 Electrical 04 Power Distribution Harness

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System. MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely

More information

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment

More information

FITTINGS, SCREWS, BOLTS, ETC.

FITTINGS, SCREWS, BOLTS, ETC. 5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For

More information

Mounting Instructions Item No.: /521/522/420/421/422

Mounting Instructions Item No.: /521/522/420/421/422 Mounting Instructions Item No.: 541.35.520/521/522/420/421/422 Revolving Corner Unit In addition to these general mounting instructions, please refer to the fitting instructions, where the individual drilling

More information

PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG

PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2

More information

Adjustable Feet Castors Accessories for Floor Elements

Adjustable Feet Castors Accessories for Floor Elements Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible

More information

SLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE

SLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE Set A Set B P7001 Standard Kit Glass Door FITTING INSTRUCTIONS SUGGESTED TOOLS DRILL MITRE/CHOP SAW TAPE MEASURE (Image for reference only) HACKSAW POCKER DOOR KIT SHORT / LONG Z SECTION LONG Z SECTION

More information

LF Series Assembly Instructions

LF Series Assembly Instructions LF Series Assembly Instructions 1998760 Revision A-10 Complete Series Master Packet 2010 Kimball International, Inc. T 800.482.1818 F 812.482.8300 Footprint Storage and Metal Filing Systems Assembly Instructions

More information

Connecting technology for conventional applications

Connecting technology for conventional applications Connecting technology for conventional applications 2 www.hettich.com Connecting technology Summary of ranges Connecting fittings for carcases Summary 6-7 Other connecting fittings Summary 20-21 Adjustment

More information

Simplex Baseboard System Baseboard System

Simplex Baseboard System Baseboard System Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products

More information

Assembly Instructions

Assembly Instructions Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt

More information

Utensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides

Utensil sets. 15 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides. 21 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and

More information

BHJ Products, Inc. Parts List & Instructions

BHJ Products, Inc. Parts List & Instructions Product Name: Lifter-Tru Kit for Ford Windsor & SVO Small Block V8 Page 1 of 5 Kit Contents: 2x End Plates 2x 5/8 Threaded Adjustment Sleeves 1x Front Angle Bracket 2x 5/8 Adjustment Sleeve Spacers * 1x

More information

INSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height

INSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height INSTALLATION GUIDE Please take a few minutes to read through this guide before getting started. 1. Overview A Typical Sliding Wardrobe Door Layout A Frame - Top Liner (optional) B Top Track C Frame - Strike

More information

Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed

Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com

More information

Parts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli

Parts List (Continued) 18 each: #8 x 0.625 Truss Head Phillips Screw 20 each: #8 x 1.75 Flat Head Phillips Screw 4 each: #8 x 1.25 Flat Head Philli EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original

More information

Sport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets

Sport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In

More information

TRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS

TRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing

More information

Preference Collection and Treatment Console INSTALLATION GUIDE

Preference Collection and Treatment Console INSTALLATION GUIDE Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious

More information

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1

More information

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that

More information

Assembly Instructions

Assembly Instructions InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective

More information

Robert Bosch GmbH. Lounge light fixture

Robert Bosch GmbH. Lounge light fixture Lounge light fixture Nice and relaxing Lounge light fixture Light has an important effect on mood. This cool light fixture is perfect for creating a cosy lounge atmosphere. 1 Introduction This cool light

More information

6.1. PUSH-PULL-PROPS and accessories

6.1. PUSH-PULL-PROPS and accessories 6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since

More information

GEZE SLIDING DOOR SYSTEMS

GEZE SLIDING DOOR SYSTEMS GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and

More information

Privacy Wall Glass Selections - Polished Edge Slider Door

Privacy Wall Glass Selections - Polished Edge Slider Door Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin

More information

STANDARD. Drawer runner program. Perfecting motion.

STANDARD. Drawer runner program. Perfecting motion. STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance

More information

Portofino Case2 Installation Guide

Portofino Case2 Installation Guide Portofino Case2 Installation Guide vjun16 (for 17 or 24 mm Surface Wall Profile) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino Case 2 shower enclosure.

More information

Semi-concealed dovetail joints

Semi-concealed dovetail joints No. 100 Semi-concealed dovetail joints A Description The semi-concealed dovetail joint is a classic solid wood corner joint. It is suitable for joining wider slats, boards and solid wood panels. Semi-concealed

More information

AVENTOS. An inspiring range of lift systems.

AVENTOS. An inspiring range of lift systems. AVENTOS An inspiring range of lift systems www.blum.com 2 Ease of motion multitude of options The AVENTOS lift system brings ease of motion to the wall cabinet. Even large and heavy lift systems can be

More information

Deauville Installation Guide

Deauville Installation Guide vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions

More information

TOYOTA MOTOR EUROPE CA Products Division Tel : Fax :

TOYOTA MOTOR EUROPE CA Products Division Tel : Fax : TOYOTA MOTOR EUROPE CA Products Division Tel : + 32 2 745 26 77 Fax : + 33 2 745 26 99 Ordering part numbers Comments Part Numbers Wooden floor one hatch PZ449-D3C42-11 one hatch with carpet PZ449-D3C42-01

More information

IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS

IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS Part #1410-0102-07 2 3 1 IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS Apply masking tape around the bottom grille opening and across the bottom of the upper facto ry grille.. Open the hood and remove the

More information

DICTATOR RTS Tube Door Closer

DICTATOR RTS Tube Door Closer Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

Premium Power Tool Accessories Proudly Made in the USA

Premium Power Tool Accessories Proudly Made in the USA Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a

More information

Portofino Installation Guide

Portofino Installation Guide vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino shower enclosure. Please study these instructions

More information

Table and Furniture Base Fittings Table Legs and Table Bases

Table and Furniture Base Fittings Table Legs and Table Bases Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:

More information

Interactive Monitor Arm

Interactive Monitor Arm Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods

More information

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS. ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer

More information

3.2.3 Rear Door Window and Quarter Window Carrier Assembly

3.2.3 Rear Door Window and Quarter Window Carrier Assembly Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without

More information

Oxford Stalls Installation Instructions

Oxford Stalls Installation Instructions Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or

More information

Pull-down clamps. No Low height clamping jaws, model Bulle

Pull-down clamps. No Low height clamping jaws, model Bulle Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.

More information

Bathroom Installation Manual

Bathroom Installation Manual Bathroom Installation Manual MAKING SPACE MORE VALUABLE May 2016 1 2 Contents page 1. Introduction Page 4 2. Tools required / key Page 5 3. Fittings Page 6 4. 600 cistern unit Page 7 5. 600 vanity unit

More information