Plate Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries.

Transcription

1 Plate Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries

2 We take the worry out of protecting what s valuable to you. Lockwood: no worries

3 Contents 1800 Series 2800 Series 4800 Series 5800 Series Brass Levers Square End Brass Plate Furniture Round End Brass Plate Furniture Narrow Stile Brass Plate Furniture Narrow Stile Brass Plate Furniture page 4 page 6 page 9 page 11 page Series Artefact 202 Series Artefact 212 Series Artefact 224 Series Artefact Detention Series Square Corner Plate Furniture Radius Corner Plate Oval Corner Plate Rectangular Plate Square and Rectangular Furniture page 23 page 25 page 28 page 30 page 33 Brass Furniture Thicker Door Accessories 52 Lockwood Door Furniture Handing Convention 53 Palladium Series Door Handles Diecast Levers Dulux Powdercoat Range 54 page 42 page 49 3

4 1800 Series Square End Brass Plate Furniture Description For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate. Application Designed for use with Lockwood Synergy Mortice Locks and Latches Product Details Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions External plates are supplied with fixing screws to suit door thickness between 32 and 45mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 166 x 48 x 12mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Successfully tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS Part 1: Fire Resistant Doorsets. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Tested to AS for Neutral Salt Spray with SC Finish Passing C10 Extreme Corrosion Resistance hours. Australian Made AS Compliance The range includes AS compliant levers and turns as shown. * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 4

5 1800 Series Levers and Functions Levers and Knobs 92 to Suit A B For lever images and dimensions, see page 15. Plates and Functions Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Indicating Turnknob Indicating Slotted Turn Lever 5

6 2800 Series Round End Brass Plate Furniture Description For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate. Application Designed for use with Lockwood Synergy Mortice Locks and Latches Product Details Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions External plates are supplied with fixing screws to suit door thickness between 32 and 45mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 166 x 48 x 12mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Successfully tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS Part 1: Fire Resistant Doorsets. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Tested to AS for Neutral Salt Spray with SC Finish Passing C10 Extreme Corrosion Resistance hours. Australian Made AS Compliance The range includes AS compliant levers and turns as shown. * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 6

7 2800 Series Levers and Functions Levers and Knobs 92 to Suit A B For lever images and dimensions, see page 15. Plates and Functions Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Indicating Turnknob Indicating Slotted Turn Lever 7

8 1800 and 2800 Series Ordering Procedure For example: Sample part number 1801/41LCP is made up of several selections. Choose your product by selecting an option from each section. Plate Type Plate Function Lever/ Knob Handing Finish / 41 L CP Plate Type Plate Funtion Lever/Knob Type Handing Finish Exterior Square End 18 Cylinder Only Right Handed R Satin Chrome SC Interior Square End 19 Cylinder & Lever B Left Handed L Polished Brass PB Exterior Round End 28 Emergency Turn Only NB: Omit if non-handed Chrome Plate CP Interior Round End 29 Emergency Turn & Lever Polished Brass Unlaquered BU Turnknob & Lever Polyester Powdercoat PC Lever Only 05 55A 78 Satin Brass SB Turnknob Only 06 Plain Plate 07 Cylinder & Fixed lever 08 Fixed Lever Only 09 Two Cylinders 10 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn & Lever 14 Privacy Indicator Turnknob Only 15 AS Compliant Levers Handed Levers Architectural Bronze Unlaqured Antique Copper Oil Rubbed Bronze AU AC ORB * For the powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. Privacy Indicator Turnknob & Lever 16 Privacy Indicator Emergency Turn & Lower Cylinder 19 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Proximity Cylinder & Lever 78 Plate Function - Handed Disabled Accessible Turnknob Only - Synergy 38 Disabled Accessible Turnknob & Lever - Synergy 39 Privacy Indicating Disabled Turn Only - Synergy 40 Privacy Indicating Disabled Turn & Lever - Synergy 41 8

9 4800 Series Narrow Stile Brass Plate Furniture Description A slimline, rectangular brass plate that adds style to your choice of lever. Application Designed for use with Lockwood 3570 Synergy Series Mortice Latches (4600/4700) and 3580 Series Synergy Additionally there are functions that are designed to work with Lockwood 3540 Series short backset mortice deadbolts. Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to the Back Set Suitability page at the end of this section. 185 Product Details Door Thickness Dimensions Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. 185 x 26 x 11.5mm Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those shown in the ordering procedure. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Fire Rated (3570 Series only). High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion. Australian Made AS Compliance The range includes AS compliant levers and turns as shown * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 9

10 4800 Series Levers and Functions Levers and Knobs to Suit A B For lever images and dimensions, see page /4900 Plates and Functions (3580 Series) deg 4600/4700 Plates and Functions (3570 Series) Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Lever For parts in red, lever and plain plate versions use the 4800/4900 versions. 10

11 5800 Series Narrow Stile Brass Plate Furniture Description Functional, yet elegant, the soft lines of this round ended brass plate complement a wide range of levers. Application Designed for use with Lockwood 3570 Synergy Series Mortice Latches (4600/4700) and 3580 Series Synergy Additionally there are functions that are designed to work with Lockwood 3540 Series short backset mortice deadbolts. Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to the backset suitability chart on page Product Details Dimensions Door Thickness Fixing Handing Standard Finishes Non Standard Finishes Special Finishes Turn Functions 185 x 26 x 11.5mm External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. For thicker doors, please refer to the brass furniture thicker doors page at the end of this catalogue section. Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those shown in the ordering procedure. Plates are not handed; levers may be reversed by removing the stop screw, except for handed levers and functions as shown in the ordering procedure. Satin Chrome Brushed (SC) Polished Brass (PB) Chrome Plate (CP) Polyester Powdercoat (PC)* Polished Brass Unlaqured (BU) Satin Brass (SB) Architectural Bronze (AZ) Architectural Bronze Unlaqured (AU) Antique Copper (AC) Oil Rubbed Bronze (ORB) Turn functions feature a unique mechanism that automatically adjusts the length of the tail bar to suit a particular door thickness. Standards and Compliance Fire Rated. (3570 Series only) High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion. Australian Made AS Compliance The range includes AS compliant levers and turns as shown * For the Powdercoat colour range, please see the Dulux Powdercoat Range at the end of this catalogue section. 11

12 5800 Series Levers and Functions Levers to Suit A B For detailed information regarding brass levers refer to page /5900 Plates and Functions (3580 Series) deg 5600/5700 Plates and Functions (3570 Series) Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Lever For parts in red, lever and plain plate versions use the 5800/5900 versions. 12

13 4800 & 5800 Series Ordering Procedure Example: Sample part number 4801/53LCP is made up of several selections. Choose your product by selecting an option from each section. Plate Type Plate Function Lever Type Handing Finish / 53 L CP Plate Type Plate Function Lever Type Handing Finish 3570 Cylinder Only Right Handed R Satin Chrome SC Exterior Square End 46 Cylinder & Lever B Left Handed L Polished Brass PB Interior Square End 47 Exterior Round End 56 Emergency Turn Only 02 Emergency Turn & Lever NB: Omit if non-handed Chrome Plate CP Polished Brass Unlaqured BU Interior Round End 57 Turnknob & Lever 04 55A 74 Polyester Powdercoat PC* 3580 Lever Only Satin Brass SB Exterior Square End 48 Interior Square End 49 Exterior Round End 58 Interior Round End 59 Turnknob Only 06 Plain Plate 07 Two Cylinders 10 Cylinder, Lever & LED 20 Lever & LED 22 Cylinder & LED 23 Plate Function - Handed AS Compliant Levers Handed Levers Architectural Bronze Unlaqured Antique Copper Oil Rubbed Bronze AU AC ORB * For the powdercoat colour range, see the Dulux Powdercoat Range at the end of this catalogue section. Fixed Lever & Cyinder Fixed Lever Only 09 Cylinder, Fixed Lever & LED 21 Disabled Accessible Turnknob Only 38 Disabled Accessible Turnknob & Lever Furniture Ordering Procedure Plate Type Plate Function Lever Type Finish / 70 SC Platform Name Plate Function Lever Type Finish Exterior Square End 48 Lever Only Satin Chrome SC Interior Square End 49 Exterior Square End 58 Interior Square End 59 Lever - Angled Up 45º 81 AS Compliant Levers Polished Brass Chrome Plate Polyester Powdercoat PB CP PC Note: No other finish options available. 13

14 4800 & 5800 Series Lever Suitability Application All narrow style door furniture will be closer to the door frame. Lever handles with 90 degree angles can cause the lever stem to hit the door frame and prevent the door from opening. The table below provides a guide to lever compatibility and each model of short back set lock from 3582 to Based on 12mm doorstop. Lever Number mm mm mm mm A B

15 Brass Levers and Knobs is defined as the clearance between the lever and the base of the rose or plate at the centre of the lever. The tables below are calculated using an assembled plate/rose thickness of 12.5mm. Due to different bearing bush, the projection and finger clearance of levers in the 4800/5800 Series is 2.5mm larger than the value shown (except Lever 90). For use on the following door furniture series: 1220 Series 1420 Series 1360 Series 1370 Series 1800 Series 2800 Series 4800 Series 5800 Series Artefact Series Knob 20 Diameter 50mm 73mm 50 Not compatible with 1220 Symphony internal rose Lever mm 53mm 35.5mm Intermezzo mm 61.5mm 40.5mm * Lever is an asymmetrical design and therefore must be handed

16 Brass Levers and Knobs Arpeggio mm 59.5mm 42mm Sonata mm 57mm 40mm Veloce mm 73.5mm 45mm 61 *Lever is an asymmetrical design and therefore must be handed Lever mm 62.5mm 40.3mm

17 Brass Levers and Knobs Lever 55A 115mm 62.5mm 40.3mm Overture mm 57.5mm 38mm Lever mm 65mm 54.2mm Lever mm 52.5mm 25.5mm

18 Brass Levers and Knobs Lever mm 51mm 43.5mm Lever mm 50mm 42mm Lever mm 48.5mm 40.5mm Lever mm 53mm 37mm

19 Brass Levers and Knobs Tempo mm 62mm 44.5mm Ving mm 53mm 45mm Lever mm 50mm 42mm Lever mm 51mm 40.5mm

20 Brass Levers and Knobs Candenza mm 52 52mm 30mm Tenor mm 50.5mm mm Lever 79B mm 50.5mm mm Lever mm mm 40mm

21 Brass Levers and Knobs Lever mm 62mm 33.5mm Lever mm 51mm 43.5mm Lever mm mm 45mm Lever mm 52mm 45mm

22 Brass Levers and Knobs Chorus Line mm 50.5mm 34.6mm

23 200 Series Artefact Square Corner Plate Furniture General Description The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors Product Details Dimensions Door Thickness* Standard Finishes Fixing Finishes Non Standard Handing Materials 162 x 162 x 3mm - aluminium 162 x 162 x 2mm - stainless steel and brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Natural Anodised Aluminium (NT) Satin Stainless Steel (SS) Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Polished Stainless Steel (PS) Powdercoat (PC)* 316 Marine Grade (MG) Polished Brass (PB) All plates are handed with the exception of plain plates and pull handles. Aluminium, brass and stainless steel Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Note: When using flush pulls back to back the minimum door thickness is 40mm. * For the Powdercoat color range, please see the Dulux Powdercoat Range at the end of this catalogue section. 2 3 SS/Brass Aluminium 23

24 200 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. *2 1 Stainless Steel Only *2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 20000NA 20100NA 20002NN 20006NN 20106NN 20010NA 20013NN 20138NN 20007AN 20007CN 20007E N 20007FN 20007NN 20107NN 20001NA 20101NA 20003NN 20004NN 20104NN 20014NN 20020NA 20120NA 20005NN 20105NN 20022NN 20122NN 20139NN 20024NN 20124NN 20025NA 20125NA 20027NN 20127NN 20028NN 20142NN 20024AN 20024CN 20024EN 20024GN 20031NN* NN* NA* NA* NN* NN* 3 *3 Recommended for sliding doors only Plates and Functions Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button 24

25 202 Series Artefact Round Corner Plate Furniture Description The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Synergy Series Mortice Locks; Latches and Push and Pull doors Product Details Dimensions Door Thickness* Fixing Standard Finishes Finishes Non Standard Handing Materials 162 x 162 x 3mm - aluminium 162 x 162 x 2mm - stainless steel and brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Natural Anodised Aluminium (NT) Satin Stainless Steel (SS) Polished Stainless Steel (PS) Powdercoat (PC)* 316 Marine Grade (MG) Polished Brass (PB) All plates are handed with the exception of plain plates and pull handles. Aluminium, brass and stainless steel Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion Note: When using flush pulls back to back the minimum door thickness is 40mm. * For the Powdercoat color range, please see the Dulux Powdercoat Range at the end of this catalogue section. 2 3 SS/Brass Aluminium 25

26 202 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. * 1 Stainless Steel Only * 2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 20200NA 20300NA 20202NN 20206NN 20306NN 20210NA 20213NN 20338N N 20207AN 20207CN 20207EN 20207FN 20207NN 20307NN 20201NA 20301NA 20203NN 20204NN 20304NN 20214NN 20220NA 20320NA 20205NN 20305NN 20222NN 20322NN 20339NN 20224NN 20324NN 20225NA 20325NA 20227NN 20327NN 20228NN 20342NN 20224AN 20224CN 20224EN 20224GN 20231NN* NN* NA* NA* NN* NN* 3 * 3 Recommended for sliding doors only Plates and Functions Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button 26

27 200/202 Series Ordering Procedure Sample part number 20001NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Type Plate Function Engraving Cylinder Shape Lever/Knob/ Pull Handle Handing Finish N A / 96 L SS Plate Type Exterior Plate (162 x 162) Square Corners 200 Interior Plate (162 x 162) Square Corners 201 Exterior Plate (162 x 162) Radius Corners 202 Interior Plate (162 x 162) Radius Corners 203 Plate Function Plain Plate 07 Pull Handle Only 24 Plate Function - Handed Cylinder Only 00 Cylinder & Lever 01 Emergency Turn Only 02 Emergency Turn & Lever 03 Turn Knob & Lever 04 Lever Only 05 Turn Knob Only 06 Cylinder & Fixed Lever 08 Fixed Lever Only 09 Engraving - Handed A G Outlined Infill R X Full Infill Male symbol A R Male text B S Female symbol C T Female text D U Disabled symbol E V Push text F W Pull text G X Unisex symbol H Y No option N For all in-filled engraving, black gloss is the standard. Lever/ Knob Type A * B 98* 2 AS Compliant Levers * * 2 96* * 1 Finish Stainless Steel Finishes Satin Stainless Steel SS Polished Stainless Steel PS Powdercoat PC 316 Marine Grade MG Aluminium Finishes Natural Anodised NT Brass Finishes Polished Brass PB Dual Cylinder 10 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn & Lever 14 Privacy Indicator Turn Knob Only 15 Privacy Indicator Turn Knob & Lever 16 Privacy Indicator Emergency Turn & Lower Cylinder 19 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Pull Handle & Cylinder 25 Cylinder Shape Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders Guarded Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders No Cylinder Function A B N Handed Levers Pull Handles P1 P1* 1 75* 2 Pull Handles - Horizontal HP1 HP1* 1 H75* 2 Handles are brass unless indicated otherwise * 1 = Stainless Steel * 2 = Aluminium * 3 = 316 Marine Grade Handing Left Handed Right Handed L R Pull Handle & Emergency Turn 26 Pull Handle & Turn Knob 27 Pull Handle & Privacy Indicator Emergency Turn 28 Pull Handle & Privacy Indicator Turn Knob 29 Pull Handle & Dual Cylinder 30 Flush Pull Only 31 Flush Pull & Cylinder 32 Flush Pull & Emergency Turn 33 Flush Pull & Turn Knob 34 Flush Pull & Privacy Indicator Emergency Turn 35 Flush Pull & Privacy Indicator Turn Knob 36 Flush Pull & Dual Cylinder 37 Disabled Turn Only 38 Disabled Turn & Lever 39 Privacy Indicating Disabled Turn Only 40 Pull Handle & Disabled Turn 42 27

28 212 Series Artefact Oval Plate Furniture Description The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Synergy Series Mortice Latches. 50 Product Details Dimensions Materials Door Thickness Standard Finishes Non Standard Finishes 162 x 50 x 3mm - aluminium 162 x 50 x 2mm - stainless steel and brass Aluminium, stainless steel or brass 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP Natural Anodised Aluminium (NT) Stainless Steel (SS) Polished Stainless Steel (PS) Powdercoat (PC) 316 Marine Grade (MG) Polished Brass (PB) Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion SS/Brass Aluminium 28

29 212 Series Levers and Functions Levers and Knob to Suit 20* 1 88* For lever images and dimensions, see page 15. * 1 Stainless Steel Only * 2 Aluminium Only Pull Handle to Suit 75 P1 Aluminium Stainless Steel Plates 21200NA 21300NA 21202NN 21206NN 21306NN 21207NN 21307NN 21210NA 21213NN 21338NN 21201NA 21301NA 21203NN 21204NN 21304NN 21205NN 21305NN 21214NN 21339NN 21220NA 21320NA 21222NN 21322NN Plates and Functions Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button 29

30 224 Series Artefact Rectangular Plate Furniture Description The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Latches. Product Details Dimensions Materials Door Thickness Finishes 162 x 50 x 2mm - stainless steel Stainless steel only. 35mm to 45mm as supplied. Maximum 65mm. For thicker door parts, see page 52. Stainless Steel (SS) Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion

31 224 Series Levers and Functions Levers and Knob to Suit For lever images and dimensions, see page 15. Pull Handle to Suit P1 Stainless Steel Plates 22400NA 22500NA 22402NN 22406NN 22506NN 22407NN 22507NN 22410NA 22413NN 22538NN 22401NA 22501NA 22403NN 22404NN 22504NN 22405NN 22505NN 22414NN 22539NN 22420NA 22520NA 22422NN 22522NN Plates and Functions Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button 31

32 212/224 Series Ordering Procedure Sample part number 21201NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Type Plate Function Engraving Cylinder Shape Lever/Knob/ Pull Handle Handing Finish N A / 96 L SS Plate Type Plate Function Engraving - Handed Lever/ Knob Type Finish Exterior Plate (162 x 50) Oval 212 Interior Plate (162 x 50) Oval 213 Exterior Plate (162 x 50) Rectangular 224 Interior Plate (162 x 50) Rectangular 225 Cylinder Only 00 Cylinder & Lever 01 Emergency Turn Only 02 Emergency Turn & Lever 03 Turn Knob & Lever 04 Lever Only 05 Turn Knob Only 06 Plain Plate 07 Dual Cylinder 10 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn & Lever 14 Privacy Indicator Turn Knob Only 15 Privacy Indicator Turn Knob & Lever 16 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Plate Function - Handed Cylinder & Fixed Lever 08 Fixed Lever Only 09 Disabled Turn Only 38 Disabled Turn & Lever 39 A G Outlined Infill R X Full Infill Male symbol A R Male text B S Female symbol C T Female text D U Disabled symbol E V Push text F W Pull text G X Unisex symbol H Y No option N For all in-filled engraving, black gloss is the standard. Cylinder Shape Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders Guarded Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders No Cylinder Function A B N * 1 55A 79 98* B AS Compliant Levers * * * 1 Handed Levers Angled Levers 98A Pull Handles P1 P1* 1 75* 2 Handles are brass unless indicated otherwise * 1 = Stainless Steel * 2 = Aluminium Handing Left Handed L Stainless Steel Finishes Satin Stainless Steel SS Polished Stainless Steel PS Powdercoat PC 316 Marine Grade MG Aluminium Finishes Natural Anodised NT Brass Finishes Polished Brass PB Right Handed R 32

33 Detention Series Square Plate Furniture Description A heavy duty plate designed for use in hospitals and detention facilities. Styled for institutional use, this plate has six fixing points to ensure that it is well secured to the door. Plates are designed to be free of ligature points. Application Lockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature - Knob 21 & 22 Covers fixing holes from existing Artefact 200 Series Furniture Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside. Product Details Dimensions Door Thickness* Finishes Fixing Handing Materials 162mm x 180mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate 35mm minimum, 45mm maximum Satin Stainless Steel (SS) Six fixing points 220D series plates have concealed fixings 221D series plates have visible fixings All plates are handed except 220D07 and 220D31, which are non-handed when ordered without engraving. Stainless steel *Note: A minimum door thickness of 50mm is required to fit flush pulls back to back. Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:1993). High durability for maximum frequency usage. Anti Corrosion. 33

34 Detention Series Square Plate Lever/Knobs and Functions 220D00 220D01 220D02 220D03 220D04 220D05 220D06 220D07 220D08 220D09 220D13 220D14 220D15 220D16 220D20 220D21 220D22 220D23 220D24 220D25 220D26 220D27 220D28 220D29 220D31 220D32 220D33 220D34 220D35 220D36 220D56 220D57 220D58 220D59 220D60 220D61 220D62 220D63 220D64 220D65 220D66 220D67 Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn Privacy Indicator Turn Snib Privacy Indicator Emergency Turn LED Pull Handle Flush Pull Cylinder guards must be ordered separately. Only the plate functions shown above in red are available with engraving. Lever and Knob Selection Standard Knob 21 Webbed Knob 22 Lever Ø60 ø Ø60 ø

35 Detention Series Rectangular Plate Furniture Description This smaller plate range has been designed for use in detention facilities such as hospitals where domestic aesthetics are preferred over institutional type styling. Plates are designed to be free of ligature points. Application Lockwood 3570 Synergy Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature Covers fixing holes from existing 212 Series Artefact Plates Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside Product Details Dimensions Door Thickness Finishes Fixing Handing Materials 162mm x 76mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate 35mm minimum, 45mm maximum Satin Stainless Steel (SS) Four fixing points 222D series plates have concealed fixings 223D series plates have visible fixings Only plates with levers and/ or turn knobs are handed Stainless steel Standards and Compliance Fire Rated. High security for maximum protection (AS4145.2:1993). High durability for maximum frequency usage. Anti Corrosion. 35

36 Detention Series Rectangular Plate Lever/Knobs & Functions 222D00 222D01 222D02 222D03 222D04 222D05 222D06 222D07 222D08 222D09 222D13 222D14 222D15 222D16 222D20 222D21 222D22 222D23 222D24 Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn Privacy Indicator Turn Snib Privacy Indicator Emergency Turn LED Pull Handle Flush Pull Note: Only plates with levers and/or turn knobs are handed. 223D Series have visible fixings. Lever and Knob Selection Standard Knob 21 Webbed Knob 22 Lever Ø60 ø

37 Detention Series Knobs and Levers Standard Knob Description Simple yet functional, this knob has soft edges to minimise impact injuries and antiligature features that make it suitable for use in detention facilities. Ø60 Webbed Knob Description The webbed knob combines pleasing aesthetics, comfortable grip and antiligature features to provide a solution for any environment. ø60 Lever 23 Description Ergonomically designed to maximise grip, the detention lever is suitable for use in hospitals and minimum security applications. It caters especially for the elderly or people with arthritic conditions

38 Detention Series Turns 3 Emergency Turn 42 Turn Knob 42 3 Indicating Emergency Turn 42 Indicating Turn Knob 42 38

39 Detention Series Pulls Flush Pull 121 Description The detention flush pull has been designed to maximise grip and eliminate the possibility of hiding objects in the cavity Standard Pull Description 40 The detention pull allows for a firm grip and can be used to open heavy doors. Also designed to be free of hanging points. R

40 Detention Series Accessories Cylinder Guards Part Number 220D00/40SS 220D00/45SS 220D00/50SS 220D00/55SS 220D00/60SS Door Thickness Suitability Suit doors 35-40mm Suit doors 35-40mm Suit doors 35-40mm Suit doors 35-40mm Suit doors 35-40mm Description Cylinder guards must be fitted with any cylinder plate function. Guards are available to suit different door thicknesses. Fixing Screws Part Number Description Door Thickness Suitability 220D11/45 Torx Anti-tamper Screws 35-45mm 220D11/55 Torx Anti-tamper Screws 45-55mm 220D11/65 Torx Anti-tamper Screws 55-65mm 220D12/45 Standard Screws 35-45mm 220D12/55 Standard Screws 45-55mm 220D12/65 Standard Screws 55-65mm 220D13/50 Snake-eye Screws 35-50mm Description Torx anti-tamper, snake-eye and standard screws are available in accessory packs to suit different door thicknesses. Only standard screws to suit doors 35mm 45mm thick are supplied with furniture. Other variations need to be ordered separately using part numbers specified. All accessory packs contain six screws for the six mounting points per plate. Screws are a M4 threaded screw with micro-encapsulation to provide resistance against coming loose. Screws are supplied with concealed fix furniture. For screws longer than 65mm, use SP0655MBK (75mm screws). 40

41 Detention Series Ordering Procedure Sample part number 220D01NA/21LSS is made up of several sections. Choose your product by selecting an option from each section. Plate Function Engraving Options Cylinder Options Lever/ Knob Handing Finish 220 D 01 N A / 21 L SS Plate Function cont. Engraving Options Knob Finish Concealed Fix 162mm x 180mm 220 Visible Fix 162mm x 180mm 221 Concealed Fix 162mm x 76mm 222 Visible Fix 162mm x 76mm 223 Function Cylinder Only 00 Cylinder and Lever/Knob 01 Emergency Turn Only 02 Emergency Turn and Lever 03 Turn Snib and Lever/Knob 04 Lever/Knob Only 05 Turn Snib Only 06 Plain Plate 07 Cylinder and Fixed Lever/Knob 08 Fixed Lever/Knob Only 09 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn and Lever/Knob 14 Privacy Indicator Turn Snib Only 15 Privacy Indicator Turn Snib and Lever/Knob 16 Cylinder, Lever/Knob and LED 20 Cylinder, Fixed Lever/Knob and LED 21 Lever/Knob and LED 22 Cylinder and LED 23 Pull Handle Only 24 Pull Handle and Cylinder 25 Pull Handle and Emergency Turn 26 Pull Handle and Turn Snib 27 Pull Handle and Privacy Indicator Emergency Turn 28 Pull Handle and Privacy Indicator Turn Snib 29 Flush Pull Only 31 Flush Pull and Cylinder 32 Flush Pull and Emergency Turn 33 Flush Pull and Turn Snib 34 Flush Pull and Privacy Indicator Emergency Turn 35 Flush Pull and Privacy Indicator Turn Snib 36 Pull Handle and Knob/Lever 56 Pull Handle, Cylinder and Knob/Lever 57 Pull Handle, Emergency Turn and Knob/Lever 58 Pull Handle, Turn Snib and Knob/Lever 59 Pull Handle, Privacy Indicator Emergency Turn and Knob/Lever 60 Pull Handle, Privacy Indicator Turn Snib and Knob/Lever 61 Flush Pull and Lever/Knob 62 Flush Pull and Cylinder and Lever/Knob 63 Flush Pull and Emergency Turn and Lever/Knob 64 Flush Pull and Turn Snib and Lever/Knob 65 Flush Pull and Privacy Indicator Emergency Turn and Lever/Knob 66 Flush Pull and Privacy Indicator Turn Snib and Knob/Lever 67 Male Symbol A R Male Text B S Female Symbol C T Female Text D U Disabled Symbol E V Push Text F W Pull Text G X Unisex Symbol H Y No Option N For all in-filled engraving, black gloss is the standard. A-G Outlined Infill R-X Full Infill Cylinder Options Australian Oval No Cylinder No Cylinder / No Tail Bar A N NN Standard Knob 21 Webbed Knob 22 Lever - Handed Lever 23 Handing Left Handed L Right Handed R Satin Stainless Steel Note: Cylinder guards must be ordered with all cylinder function plates. All turn snib functions are supplied with tailbars and clutching mechanisms as standard. SS 41

42 Palladium Series Door Furniture Description The Palladium Series represents the highest standard in residential and semi-commercial door hardware and is brought to you through modern innovative designs, combined with quality manufacturing. A wide range of lever options is available to enable a common style throughout the home. Keying Use with Euro profile cylinder Product Details Dimensions Door Thickness Finishes Fixing Handing Materials Screws 222 x 30 x 9mm Minimum 32mm - maximum 45mm door thickness. Satin Chrome Pearl (SP) Chrome Plate (CP) Gold Plate (GP) Black (BLK) Polyester Powdercoat (PPC) (Specify Dulux Color) Lockwood Palladium Series Door Furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Easy, field selectable handing. All plates and levers in the Palladium Series are constructed from solid zinc die-cast. M4 Trilobial thread cutting screws Standards and Compliance High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion. 42

43 Palladium Series Furniture The exceptional range of Palladium Door Furniture offers builders, specifiers and interior designers an array of levers that can be used in any residential environment. The Palladium Series of door furniture reflects the best in quality, blended with sophisticated designs. The Palladium Series was produced to meet the rigorous aesthetic requirements of residential markets, while conforming to the ever increasing need for quality semi-commercial building segments. Available in Palladium and Palladium Xtra versions to suit a wide range of applications. Summit L1 Spire L2 Element L3 Glide L4 Aria #27 Hakea #28 Acacia #29 Saltbush #34 Mulga #36 Gidgee #37 43

44 Palladium Series Door Furniture 85mm Plates and Functions For use with Optimum Mortice Locks 85 PL2/85/## PL3/85/## PL4/85/## Note: The internal single cylinder configuration is also used in the Palladium French Door kits (PLFD/85/##) only in this configuration the external lever is fixed. No Pitch Plates For use with passage functions. PL1/00/## PL5/00/## ### Represents lever style number

45 Palladium Xtra Door Furniture Description The Palladium Xtra Series is designed specifically for the Optimum range of mortice locks to increase functionality enabling both internal snibbing for safety mode and lock status indication. Palladium Xtra is suitable for use in residential buildings, apartments and semi-commercial applications. Keying Use with Euro profile cylinder. Product Details Dimensions Door Thickness Finishes Fixing Handing Materials Screws 222 x 30 x 9mm Minimum 32mm - maximum 45mm door thickness. Satin Chrome Pearl (SP) Black (BLK) Chrome Plate (CP) Polyester Powdercoat (PPC) Lockwood Palladium Xtra door furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Easy, field selectable handing. All plates and levers in the Palladium Series are constructed from solid zinc die-cast. M4 Trilobial thread cutting screws Standards and Compliance High security for maximum protection (AS4145.2:2008). High durability for maximum frequency usage. Anti Corrosion. 85mm Plates and Functions PX4/85/## ### Represents lever style number. Note: Fixing hole centres at 181mm 45

46 Palladium Series Door Furniture Summit L1 Hakea # Spire L2 Acacia # Element L3 Saltbush #

47 Palladium Series Door Furniture Glide L4 Mulga # Aria #27 Gidgee #

48 Palladium Series Ordering Procedure Sample part number PL4/85/34SC is made up of several sections. Choose your product by selecting an option from each section. Palladium Platform Name Function Pitch Lever Finish PL 4 / 85 / 34 SP Platform Name Pitch Finish Palladium PL Lever Only 00 Chrome Plate CP Function Passage Set 1 External Single Cylinder 2 Internal Single Cylinder 3 85mm Pitch 85 Lever Summit L1 Spire L2 Gold Plate Satin Chrome Pearl Black Polyester Powder Coat GLD SP BLK PPC Double Cylinder 4 Element L3 Fixed Dummy 5 Glide L4 French Door FD Aria 27 Hakea 28 Acacia 29 Saltbush 34 Mulga 36 Gidgee 37 Palladium Xtra Platform Name Function Pitch Lever Finish PX 4 / 85 / 34 SP Platform Name Pitch Finish Palladium Xtra PX 85mm Pitch 85 Satin Chrome Pearl SP Function Double Cylinder 4 Lever Summit Spire L1 L2 Black Chrome Plate Polyester Powder Coat BLK CP PPC Element L3 Glide L4 Aria 27 Hakea 28 Acacia 29 Saltbush 34 Mulga 36 Gidgee 37 48

49 Diecast Levers For use on the following door furniture series: Diecast Levers L1 L2 L3 L L5 29A Velocity Large Rose X X X X X X Velocity Small Rose X X X X X X X X X Daintree Series X X X X X X X X X X Palladium X X X X X X X X X X Nexion X X X X X X X X X X Hakea # Part Number #28 121mm 13 62mm 42mm *Design Registered Australia/New Zealand. Acacia # Part Number # mm 56mm 41mm *Design Registered Australia/New Zealand. Saltbush # Part Number # mm 64mm 41mm *Design Registered Australia/New Zealand. 49

50 Diecast Levers Aria #S27 Part Number #S27 123mm 48mm 36mm *Design Registered Australia/New Zealand Mulga # Part Number # mm 16 63mm 47mm *Design Registered Australia/New Zealand. Gidgee # Part Number #37 122mm 53mm 37mm *Design Registered Australia/New Zealand. Summit #L Part Number #L mm 57mm 37mm *Design Registered Australia/New Zealand. 50

51 Diecast Levers Spire #L Part Number #L mm 57mm 41mm *Design Registered Australia/New Zealand. Element #L3 Part Number mm 59.5mm 42mm *Design Registered Australia/New Zealand Glide #L Part Number #L4 121mm 8 56mm 34mm *Design Registered Australia/New Zealand

52 Brass Furniture Thicker Door Accessories Lockwood brass door furniture is suitable use across a wide range of door thicknesses. In certain applications longer screws, spindles and turnsnib tailbars may be required. Screws B A Screws Part Number Pack Size (A) Threaded (B) Door Thickness Min Max SPA20-V3 NSS 20 65mm 40mm 32mm 50mm SP0655MBK 10 75mm 40mm 42mm 60mm SP ZP mm 75mm 52mm 105mm SP SS mm 125mm 97mm 200mm Note: Item shown is red is the standard screw that is supplied with furniture. Consideration should be given to screw finish on furniture platforms featuring visible fixing. Mortice Lock Spindles A Mortice Lock Spindles Part Number Pack Size (A) Door Thickness Min Max SP mm 35mm 50mm SP mm 50mm 75mm SP mm 75mm 100mm Note: Item shown is red is the standard screw that is supplied with furniture. In thicker door scenarios when Lockwood Brass Door Furniture is used with Lockwood Synergy Series Mortice Locks longer spindles may be required. Turnsnib Tailbars The door thickness range for a turnsnib tailbar will depend on whether the turn is in a cylinder and turn configuration or a privacy (turn and turn) configuration Turnsnib Tailbars Part Number Pack Size SP571-38ZP 10 47mm SP ZP 1 98mm Note: Item shown is red is the standard tailbar that is supplied with furniture. 52

53 Lockwood Door Furniture Handing Convention Applicable for All Handed Furniture Left Hand Lever Assembly Door Opening In Inside Right Hand Lever Assembly Right Hand Door Left Hand Door Right Hand Lever Assembly Outside Left Hand Lever Assembly Left Hand Lever Assembly Door Opening Out Inside Right Hand Lever Assembly Right Hand Door Left Hand Door Right Hand Lever Assembly Outside Left Hand Lever Assembly 53

54 Dulux Powdercoat Range Colour Swatches Dulux Wedgewood Satin Dulux Horizon Blue Gloss Dulux Azure Grey Satin Dulux APO Grey Satin Dulux Pearl White Gloss Dulux Oyster Matt Dulux Tropics Gloss Dulux Pottery Satin 32774* Dulux Claret Satin 32999* Dulux Charcoal Gloss Dulux Red Earth Gloss Dulux Old Mauve Satin 32694* Dulux Black Gloss 19319* Dulux Black Matt 19930* Dulux Anodic Bronze Satin 50068* Dulux Deep Brunswick Green Gloss 52052* Dulux Precious Pearl Gloss 18796* Dulux Charcoal Met Pearl Gloss Dulux Anotec Dark Grey Matt Dulux Stone Beige Matt The colours represented on this chart are as close to the actual colours as modern printing processes allow. * Technical advice should be sought, where severe ultraviolet exposure conditions exist. Note: Consideration should be given to match cylinder finish. Dulux Lock Bronze Powdercoat recommended as an alternative to the discontinued Florentine Bronze Plated Finish. 54

55 Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and aftersales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. The Lockwood 25 Year Mechanical Warranty Our belief that we manufacture the finest premium products available in today s market place is backed by the Lockwood 25 Year Mechanical Warranty, ensuring that Lockwood continues to keep Australians safe by delivering security and peace of mind. For warranty terms and conditions, please visit or call 1300WARRANTY ASSA ABLOY Australia Pty Ltd 235 Huntingdale Road Oakleigh, Victoria, 3166 Australia 1300 LOCK UP ( ) lockweb.com.au ASSA ABLOY New Zealand Ltd 6 Armstrong Road Albany, Auckland, 0632 New Zealand info.nz@assaabloy.com Telephone assaabloy.co.nz ASSA ABLOY Australia Pty Limited ABN _06_V1.0 MC04038