2000/2100/2200 Series

Size: px

Start display at page:

Download "2000/2100/2200 Series"

Lynn Lyons
5 years ago
Views:

1 2000/2100/2200 Series This comprehensive selection of pivoting bolt deadlocks is designed to suit narrow stile hinged and sliding doors. The 2000 Series encompasses deadlocks with 22mm and 36mm bolt projection, together with a specific sliding door lock, featuring a vee-cut bolt for secure locking. The sliding door deadlocks are suitable for both door stile and door jamb mounting. With positive deadbolt action, the 2000 Series is recommended for use on aluminium commercial doors, where there is only a limited area (narrow stile) for lockset installation. Door Thickness Keying Backset Handing Material - 28mm 58mm - 6 pin timber cylinder C4 keyway - 23mm - can be changed on site - Deadbolt heavy duty steel - Case Zinc plated steel 2000 Series Cylinder Mortice Deadlock Short Throw Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged and pivot doors with standard jamb. The deadlock has a 22mm deadbolt projection and a positive deadlocking action. CA 5/10 years 2100 Series Cylinder Mortice Deadlock Long Throw Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged and pivoted double doors. The deadlock has a 36mm deadbolt projection and a positive deadlocking action. CA 5/10 years 2200 Series Cylinder Mortice Sliding Door Deadlock Narrow stile sliding door deadlock with a vee-cut deadbolt for positive engagement in strike when locked. The deadlock has a 29mm deadbolt projection. CA 5/10 years All dimensions in mm 2.1

2 2000/2100/2200 Series Product Information Keying Information 6 pin tumbler system supplied in the standard broach, keyed to differ with two keys per lock. Special keying is available. Series Function Selection Chart Outside of door is on left hand side of illustration All locks are non-handed Series All Gainsborough locks come with brass keys. Standard keyed differently (KD) unless otherwise specified. Locks can be keyed alike, master keyed, grand master keyed, maison keyed or project keyed refer to page vi in Introduction section for details. Keying Codes KA Keyed Alike MK Master Keyed Series GMK GGMK MA PK PMK Grand Master Keyed Great Grand Master Keyed Maison Keyed Project Keyed Project Master Keyed Series All dimensions in mm

3 2000/2100 Cylinder Deadlocks Finish Clear Anodised. Deadbolt For 2000 series 22mm projection. For 2100 series 36mm projection. Backset 23mm. Special Keying Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed refer to page vi in Introduction section for details Series Cylinder Mortice Deadlock Short Throw Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged door applications. The deadlock has a 22mm deadbolt projection and a positive deadlocking action Series Cylinder Mortice Deadlock Long Throw Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged door applications. The deadlock has a 36mm deadbolt projection and a positive deadlocking action. Limiting Dimensions All dimensions in mm 2.3

4 2000/2100 Cylinder Deadlocks 2000/2100 Series Mortice Cylinder Deadlocks Product Description Catalogue No. Cylinder and Turnbutton Reversible 22mm bolt projection mm bolt projection Key outside locks and unlocks. Turnbutton inside locks and unlocks Non-handed. Double Cylinder Reversible 22mm bolt projection mm bolt projection Key either side locks and unlocks. Non-handed Single Cylinder Reversible 22mm bolt projection mm bolt projection Cylinder can be installed either side. Key locks and unlocks Non-handed. Single Turnbutton Reversible 22mm bolt projection mm bolt projection Turnbutton can be installed on either side. Turnbutton locks and unlocks Non-handed. 2.4 All dimensions in mm

5 2200 Series Sliding Door Deadlock Finish Clear Anodised. Deadbolt Vee-cut for positive locking, 29mm projection. Backset 23mm. Special Keying Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed refer to page vi in Introduction section for details Series Cylinder Mortice Sliding Door Deadlock Narrow stile sliding door deadlock with a vee-cut deadbolt for positive engagement in strike when locked. The deadlock has a 29mm deadbolt projection. Limiting Dimensions All dimensions in mm 2.5

6 2200 Series Sliding Door Deadlock 2200 Series Cylinder Mortice Sliding Door Deadlock Product Description Catalogue No. Cylinder and Turnbutton Reversible 29mm bolt projection Key outside locks and unlocks. Turnbutton inside locks and unlocks. Non-handed Double Cylinder Reversible 29mm bolt projection Key either side locks and unlocks. Non-handed Single Cylinder Reversible 29mm bolt projection Cylinder can be installed either side. Key locks and unlocks Single Turnbutton Reversible 29mm bolt projection Turnbutton can be installed on either side. Turnbutton locks and unlocks All dimensions in mm

7 2000 Series Accessories Accessories for 2000 Series Narrow Stile Mortice Locks Faceplate Latching Strike 2000/FP01 Faceplate for timber door to suit 2000/2100/2200 Series. 2200/SP01 Latching Strike to suit Sliding Door Deadlock (for aluminium door). 2200/SP02 Timber faceplate to suit latching strike box (for conversion to timber doors). All dimensions in mm 2.7

2400/2500/2600 Series Gainsborough s range of Heavy Duty Mortice Locks and Latches has been designed and manufactured in Australia, providing security, aesthetics and reliability specifically for the

9 2400/2500/2600 Series Gainsborough s range of Heavy Duty Mortice Locks and Latches has been designed and manufactured in Australia, providing security, aesthetics and reliability specifically for the commercial/residential market. Featuring a wide variety of locking and latching functions in a totally different body design, Gainsborough can meet with the most stringent of security solutions in the Australian market. Door Thickness - 32mm 50mm Keying - 6 pin timber cylinder C4 keyway Backset - 23mm (2000) - 25mm (4400) Handing Material - can be changed on site - Case Zinc alloy with nickle plate finish - Latch Sintered stainless steel 14mm - Positive deadlatching up to 10mm 2400 Series Cylinder Mortice Vestibule Lock Functions of vestibule with cylinders or turnbuttons. Inside handle always free for exit. Deadlatched upon closing of door. Can be used with electric strikes. With kick off/anti-lockout. SS 2500 Series Cylinder Mortice Combination Locking Latch Handles operated both sides by a series of cylinders or turnbuttons. Handles locked both sides. Deadlatched upon closing of door. Can be used with electric strikes. With kick off/anti-lockout. SS 2600 Series Cylinder Mortice Passage Latch Passage latch function. Handles locked both sides. With kick off/anti-lockout function. SS 5/10 years S2 D3 S2 D3 5/10 years 5/10 years All dimensions in mm 2.9

2400/2500/2600 Series Product Information Applications Latchbolts Cylinders 2. 3. 10. 8. 1. 7. 4. 5. Latchbolts are 14mm.

10 2400/2500/2600 Series Product Information Applications Latchbolts Cylinders Latchbolts are 14mm. Sintered Stainless Steel for latching type locks & latches and feature an auxiliary bolt which deadlatches the main latchbolt upon closing of the door. Latchbolt and auxiliary deadlatch bolt can be reversed easily for doors opening in or out. Door Clearance To maintain lock security and facilitate correct latch retraction, clearance between door and frame should be 2.5mm 4mm. Oval cylinders are in Gainsborough mortice locks and can be interchanged with other specially keyed cylinders. Cylinders can be supplied with or without the lock. Gainsborough C4/6 pin standard profile, straight six restricted profile. Electric Strikes The Gainsborough 2000 & 3000 Series Mortice Lock suits the Gainsborough ES1000SS Electric Strike Lock Cylinder below Hub Assembly mm Split Hub Assembly. 3. Multi Function Lock Slide 4. Stainless Steel Latchbolt 14mm 5. Stainless Steel Auxiliary Deadlatch 14mm 6. Stainless Steel Universal Anti-Rattle Strike 7. Stainless Steel Faceplate 8. Tamper Resistant Cylinder Aperture 9. Zinc Alloy Case 10. Field Selectable Kick Off. Multi Function Multi function is achieved by simply pressing a button & holding down locking bar thus changing the lock from combination function (both lever/knobs locked on outside & inside of case) to vestibule function (one lever/knob locked with the other lever/knob operable at all times, normally for egress). Lock case does not need to be disassembled to achieve either of the above functions. 1. Make sure GREEN can be seen in the square window. IF GREEN IS NOT SEEN, press the Locking Bar in the cylinder hole below. Electric Strike ES1000/24SS (24 Volt) Non-Monitored ES1000/12SS (12 Volt) Non-Monitored ES1000/24MSS (24 Volt) Monitored ES1000/12MSS (12 Volt) Monitored 2. Use a cylinder pin to press and hold down the button in the Bottom Round Window and at the same time do Press Locking Bar with finger. Cylinder pin 2.10 All dimensions in mm

11 2400/2500/2600 Series Series Function Selection Chart Outside of door is on the left hand side of illustration - All locks are non-handed Series Vestibule Mortice Deadlatch 24JA 24JAAL 24KA 24VO 24CV 24OV 24KO 24CO 24VV 24CA 24OA 24EO 2500 Series Combination Locking Deadlatch 25JA 25JAAL 25KA 25VO 25CV 25EA 25OA 25VV 25CA 25OV 2600 Series Passage Latch 2600 All dimensions in mm 2.11

12 2400/2500/2600 Series Finishes SS Stainless Steel. When ordering, add relevant finish code to form complete catalogue number. Latchbolt 14mm Standard latchbolt. Backsets Available 23mm. Special Keying Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial and residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed refer to page viii in Introduction section for details. Vestibule Mortice Locks and Latches. Available in a range of functions for egress application. Lock automatically deadlatches Limiting Dimensions 25.2 R /SP01 20mm UNIVERSAL STRIKE /SB01 STRIKE BOX 2.12 All dimensions in mm

13 2400 Series Vestibule Lock 2400 Series Mortice Vestibule Deadlatching Locks Product Description Catalogue No. Entrance Office Lock Cylinder and Turnbutton. Outside handle is locked or unlocked by either key from outside or turnbutton inside. 24JA Stair Lock with Anti-Lockout Cylinder and Turnbutton. Outside handle is locked or unlocked by either key from outside or turnbutton inside, but only Latching of door will cause unlocking of outside handle as kick-off function applies. 24JAAL Entrance Office lock (With dual function) Operation of handle inside also kicks-off outside handle, unlocking door. Auxiliary bolt deadlatches when door is closed. Cylinder and Turnbutton. Outside handle is locked or unlocked by either key from outside or turnbutton inside. Key from outside can be rotated either way, thus retracts latchbolt or unlocks outside handle. (A counter action for vandalism to outside handle). 24KA Classroom Lock Single Cylinder (With dual function) Cylinder Outside. Outside handle is locked or unlocked by key from outside.* *Key outside can be rotated either way, thus retracts latchbolt or unlocks outside handle. 24KO Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 24JA SS All dimensions in mm 2.13

14 2400 Series Vestibule Lock 2400 Series Mortice Vestibule Deadlatching Locks Product Description Catalogue No. Classroom Lock Cylinder Outside. Outside handle is locked or unlocked by key from outside. 24VO Exit Lock Double Cylinder Double Cylinder. Outside handle is locked or unlocked by key from inside. Key outside retracts latchbolt. 24CV Inside handle is always free for immediate exit. Exit Lock Single Cylinder Cylinder Inside. Outside handle is locked or unlocked by key from inside. 24OV Entry & Storeroom Door Cylinder Outside. Key outside retracts latchbolt. Outside handle is rigid at all times. 24CO Ideal for use with electric strike (ES or 24 volt). Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 24CV SS 2.14 All dimensions in mm

15 2400 Series Vestibule Lock 2400 Series Mortice Vestibule Deadlatching Locks Product Description Catalogue No. Double Cylinder Double Cylinder. Outside handle is locked or unlocked by key from both sides. 24VV Entrance Office Lock Cylinder and Turnbutton. Outside handle is locked or unlocked by turnbutton inside. Key outside retracts latchbolt. 24CA Exit Latch Turnbutton Inside. Outside handle is locked or unlocked by turnbutton inside. 24OA Exit Latch No Cylinder or Turnbutton. Latchbolt operated by handle inside only. No outside handle. 24EO Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 24CA PS All dimensions in mm 2.15

16 2500 Series Combination Lock Finishes SS Stainless Steel. When ordering, add relevant finish code to form complete catalogue number. Latchbolt 14mm Standard latchbolt. Backsets Available 23mm. Special Keying Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed refer to page vi in Introduction section for details. Combination Locks and Latches. Available in a range of funcions for entry doors where egress is not is not required. Knob or snib locks both inside and outside handles/knobs. Locks are deadlatched upon closing of door. Limiting Dimensions 25.2 R /SP01 20mm UNIVERSAL STRIKE /SB01 STRIKE BOX 2.16 All dimensions in mm

17 2500 Series Combination Lock 2500 Series Mortice Combination Locks Product Description Catalogue No. Office Locking Latch Cylinder and Turnbutton. Both handles are locked or unlocked by either key from outside or turnbutton inside. 25JA Stair Lock with Anti-Lockout Cylinder and Turnbutton. Outside handle is locked or unlocked by either key from outside or turnbutton inside, but only Latching of door will cause unlocking of outside handle as kick-off function applies. 25JAAL Entrance Locking Latch (With dual function) Operation of handle inside also kicks-off outside handle, unlocking door Auxiliary bolt deadlatches when door is closed. Cylinder and Turnbutton. Both handles are locked or unlocked by either key from outside or turnbutton inside. Key outside retracts latch.* *Key from outside can be rotated either way, thus retracts latchbolt or unlocks outside handle. (A counter action for vandalism to outside handle). 25KA Patio Lock Cylinder Outside. Both handles are locked or unlocked by key from outside. 25VO Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 25JA SS All dimensions in mm 2.17

18 2500 Series Combination Lock 2500 Series Mortice Combination Locks Product Description Catalogue No. Entrance Lock Double Cylinder Double Cylinder. Both handles are locked or unlocked by key from inside. 25CV Key outside retracts latchbolt. Privacy Latch Turnbutton Inside. Emergency Button Outside. Both handles are locked or unlocked by turnbutton inside. 25EA Emergency button outside allowing emergency unlocking. Patio Lock Turnbutton Inside Both handles are locked or unlocked by turnbutton inside. 25OA Entrance Lock Double Cylinder Double Cylinder. Both handles are locked or unlocked by either key from either side. 25VV Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 25EA SS 2.18 All dimensions in mm

19 2500 Series Combination Lock 2500 Series Mortice Combination Locks Product Description Catalogue No. Exit Lock Single Cylinder Cylinder Inside. Both handles are locked or unlocked by key from inside. 25OV Office Locking Latch Cylinder and Turnbutton. Both handles are locked or unlocked by turnbutton inside. Cylinder outside retracts latch. 25CA Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g. 25CA SS All dimensions in mm 2.19

20 2600 Series Passage Lock Finishes SS Stainless Steel. Latchbolt 14mm Standard latchbolt. Backsets Available 23mm. Passage Latch Non-locking handle/knob. Passage latch from either side. No deadlatching required. Limiting Dimensions 25.2 R /SP01 20mm UNIVERSAL STRIKE /SB01 STRIKE BOX 2.20 All dimensions in mm

21 2600 Series Passage Latch 2600 Series Mortice Passage Latch Product Description Catalogue No. Passage Set 2600 Passage Set Plain Latch. Latchbolt operated by handles both sides Finish Codes: SS Stainless Steel Note: Add finish code to above to form complete catalogue number e.g SS All dimensions in mm 2.21

22 2400/2500/2600 Series Accessories Accessories /SP01 20mm UNIVERSAL STRIKE 1000/SP02 36mm EXTENDED UNIVERSAL STRIKE 1000/SP03 40mm EXTENDED UNIVERSAL STRIKE /SB01 STRIKE BOX 2000/FPDLT FACEPLATE FOR TIMBER D 2.22 All dimensions in mm

23 2400/2500/2600 Series Accessories Cam Identification Chart Function Assembly Chart 2400 Series Outside Inside 24JA 2000/CAMJ1 2000/TAJ1 24JAAL 2000/CAMJ1 2000/TAJ1 24KA 2000/CAMK1 2000/CAMV 24VO 1000/J1 2000/CAMV 2000/TAK1 BLANK BLANK 24CV 2000/CAMC 2000/CAMV 1000/J1 24OV BLANK 2000/CAMV 1000/J1 24KO 2000/CAMK1 BLANK 24CO 2000/CAMC BLANK 24VV 2000/CAMV 1000/J1 2000/CAMV 1000/J1 24CA 2000/CAMC 2000/TAJ2 24OA BLANK 2000/TAJ2 24EO BLANK BLANK Keying Information 6 pin tumbler cylinder supplied in the standard broach, keyed to differ with 2 keys per lock. Special keying is available. All Gainsborough locksets come with brass keys. Standard keyed differently (KD) unless otherwise specified. Locks can be keyed to following systems: KA MK GMK GGMK MA PK PMK Keyed Alike Master Keyed Grand Master Keyed Great Grand Master Keyed Maison Keyed Project Keyed Project Master Keyed Cam Identification 2500 SERIES Outside Inside 25JA 2000/CAMJ1 2000/TAJ1 25JAAL 2000/CAMJ1 2000/TAJ1 25KA 2000/CAMK1 2000/CAMV 25VO 1000/J1 2000/CAMV 2000/TAK1 BLANK BLANK 25CV 2000/CAMC 2000/CAMV 1000/J1 25EA BLANK 2000/TAJ2 25OA BLANK 2000/TAJ2 25VV 2000/CAMV 1000/J1 2000/CAMV 1000/J1 25CA 2000/CAMC 2000/TAJ2 25OV BLANK 2000/CAMV 1000/J SERIES Outside Inside 2600 BLANK BLANK 2000/CAMV 1000/J1 2000/CAMC 2000/CAMJ1 2000/TAC1 2000/CAMK1 2000/CAMH 1000/J1 All dimensions in mm 2.23

4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS

4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets are designed and manufactured for use in commercial buildings, including hotels and offices, but are also ideal for residential entrances and