Push and Pull Door Furniture. Plate Door Furniture Door Furniture and General Hardware
|
|
|
- August Riley
- 6 years ago
- Views:
Transcription
1 Plate Door Furniture Push and Pull Door Furniture Door Furniture and General Hardware Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP ( ) lockweb.com.au 3.115
2 184 Offset Pull Made from brass and designed to compliment 1800 and 2800 Series Brass Plate Furniture, the 184 Offset Pull provides a fixed pull without impacting the cylinder/turn functionality or the design aesthetic of a plate furniture installation. Application Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks using Lockwood 1800 or 2800 Series Brass Plate Furniture. Recomended for Access Control doors with electric strikes. Compliance DISABLED ACCESS AS Dimensions Length: Diameter: Projection: Screw Centres: Finger Clearance: Fixing 163.5mm 16mm 61mm 147.5mm 45mm The 184 Pull is designed with 147.5mm screw centres to enable it to be fixed through a standard visible fix brass plate (1900 or 2900). Plates are to be ordered separately to the 184 and care should be taken to ensure that a visible fix plate is specified for both sides of the door. Finishes Satin Chrome Brushed Chrome Plate SC CP 184CP and 1900CP
3 194 Series Round End Push and Pull Plates Made from brass and supplied completely assembled with handles if applicable. PUSH or PULL plates are engraved with 16mm high letters. Application Brass Push and Pull Handle Door Furniture for public, commercial and industrial buildings. Compliance DISABLED ACCESS AS Dimensions Length: Width: Thickness: Diameter: Finger Clearance: Fixing 255mm 52mm 10mm 17.5mm 43mm Plates are designed to fit back to back. The external plate is supplied with concealed fixings and therefore must be used with an internal plate which has visible fixings. Finishes The 194 Series is only available in the following finishes: Chrome Plate Polished Brass Satin Chrome Brushed CP PB SC 19425N/CP Plate Options for 194 Pull Plate with Pulls PULL Plate Options for 194 Pull Plate with P3 Pulls 255 Plate Options for 194 Push Plate PUSH Plates and Functions Legend Cylinder Hole 52 10
4 206/207 Series Push and Pull Plates Application The 206/207 Series Door Furniture are 2mm thick stainless steel plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks. Compliance DISABLED ACCESS AS Dimensions Length: Width: Thickness: Handle Diameter: Finger Clearance: Materials Stainless steel. Door Thickness 250mm 200mm 2mm 17.5mm 40mm 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws S Finishes Satin Stainless Steel Powdercoat Polished Stainless Steel SS PC PS Image for illustration only Plates 20600NA 20700NA 20607NN 20707NN 20610NA 20624NN/P NN/P NA/P NA/P3 Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button D Handle Selections Brass or Stainless Steel 17.5mm Centres P3 203mm
5 208/209 Series Push and Pull Plates Application The 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks. Compliance DISABLED ACCESS AS Dimensions Length: Width: Thickness: Handle Diameter: Finger Clearance: Materials Stainless steel. Door Thickness 324mm 162mm 2mm 17.5mm 40mm 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws S Finishes Satin Stainless Steel Powdercoat Polished Stainless Steel SS PC PS Image for illustration only Plates N A N A 20807NN 20907NN 20810NA 20824NN/P NN/P NA/P NA/ P4 Legend Cylinder Hole Slotted Button LED Turn-Snib Disabled Indicating Slotted Button D Handle Selections Brass or Stainless Steel 17.5mm Centres P4 250mm
6 Note: x indicates this function is not available in this configuration. Push and Pull Door Furniture 214/215 Series 10mm Radius Corner Push and Pull Plates Application The 214 Series Door Furniture is 300 x 100 x 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks. Compliance DISABLED ACCESS AS Dimensions Length: Width: Thickness: Handle Diameter: Finger Clearance: Materials Stainless steel or brass. Door Thickness 300mm 100mm 2mm 17.5mm 40mm 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws S Finishes Satin Stainless Steel Polished Stainless Steel Powdercoat Polished Brass Function/Handle Selection SS PS PC PB Certain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function NA/SS Plates 21400NA 21500NA 21406NN 21506NN 21407NN 21507NN 21425NA/* 21525NN/* 21427NN/* 21527NN/* 21424NN/* 21524NN/* 21402NN 21413NN 21538NN 21426NN/* 21428NN/* 21844NN/* 21407AN 21407BN 21407CN 21407DN 21407FN 21424BN/* 21424DN/* 21424GN/* 21444NN/* Function Description No Engraving 24 Pull Handle Only P4 P3 25 Pull Handle and Cylinder With Engraving Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button 26 Pull Handle and Emergency Turn 27 Pull Handle and Turn Knob 28 Pull Handle and Privacy Indicator Emergency Turn 29 Pull Handle and Privacy Indicator Turn Knob 30 Pull Handle and Dual Cylinder 42 Pull Handle and Disabled Turn D Handle Selections 17.5mm Handle P3 P4 Centres 108mm 152mm 203mm 250mm 44 Pull Handle Only Offset from Bottom
7 216/217 Series 10mm Radius Corner Push and Pull Plates Application The 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door. Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks. Compliance DISABLED ACCESS AS Dimensions Length: 300mm Width: Thickness: 65mm 2mm 21625NA/ 21644NN/ Handle Diameter: 17.5mm Finger Clearance: Materials Stainless steel or brass. 40mm Plates Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws S NA 21700NA 21606NN 21706NN 21607NN 21707NN 21602NN 21613NN 21738NN Finishes Satin Stainless Steel Polished Stainless Steel Powdercoat Polished Brass SS PS PC PB 21625NA/* 21725NA/* 21627NN/* 21727NN/* 21624NN/* 21724NN/* 21626NN/* 21628NN/* 21742NN/* Function/Handle Selection Certain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function AN 21607BN 21607CN 21607DN 21607FN 21624BN/* 21624DN/* 21624GN/* 21644NN/* Function Description No Engraving With Engraving Legend 24 Pull Handle Only P4 P3 Cylinder Hole Slotted Button LED 25 Pull Handle and Cylinder Turn-Snib Disabled Indicating Slotted Button 26 Pull Handle and Emergency Turn 27 Pull Handle and Turn Knob 28 Pull Handle and Privacy Indicator Emergency Turn 29 Pull Handle and Privacy Indicator Turn Knob 30 Pull Handle and Dual Cylinder 42 Pull Handle and Disabled Turn 44 Pull Handle Only Offset from Bottom D Handle Selections 17.5mm Handle P3 P4 Centres 108mm 152mm 203mm 250mm Note: x indicates this function is not available in this configuration.
8 218/219 Series 10mm Radius Corner Push and Pull Plates Application The 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Designed for use with Lockwood 3570 Synery and 3P70 Pentagon Series Mortice Locks. Compliance DISABLED ACCESS AS Dimensions Length: Width: Thickness: Handle Diameter: Finger Clearance: Materials Stainless steel or brass. Door Thickness 250mm 50mm 2mm 17.5mm 40mm 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws S Engraving Options are available as indicated on the right. Finishes Satin Stainless Steel Polished Stainless Steel Powdercoat Polished Brass Function/Handle Selection SS PS PC PB Certain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function. Function Description No Engraving 24 Pull Handle Only P3 25 Pull Handle and Cylinder 26 Pull Handle and Emergency Turn 27 Pull Handle and Turn Knob 28 Pull Handle and Privacy Indicator Emergency Turn 29 Pull Handle and Privacy Indicator Turn Knob 30 Pull Handle and Dual Cylinder 42 Pull Handle and Disabled Turn 44 Pull Handle Only Offset from Bottom With Engraving Note: x indicates this function is not available in this configuration NA/P NN/P3 Plates 21800NA 21900NA N N N N N N N N 21802NN N N N N 21825NA/* 21925NA/* 21827NN/* 21927NN/* 21824NN/* 21924NN/* 21826NN/* 21828NN/* 21942NN/* 21807AN 21807BN 21807CN 21807DN F N 21824BN/* 21824DN/* G N / * 21844NN/* Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button D Handle Selections 17.5mm Handle P3 Centres 108mm 152mm 203mm
9 Pull Handles All pull handles are designed for single handle application and can be used with Lockwood Pull Plates and Roses. Features and Specifications AS Compliance Fixing Handles are concealed fixed. If ordered with Lockwood Pull Plates or Roses, handles are screw fixed to plates. Materials Brass and stainless steel. Image for illustration only Limiting Dimensions Handle Number Length Diameter Projection Fixing Centres Finger Clearance Brass Stainless Steel Old Handle , , 17 P , 18 P B , 17 B , 18 B Limiting Dimensions Handle Number Length Diameter Projection Fixing Centres Finger Clearance Base: Top: 73 Designed for single handle applications for hospitals, disabled and aged care facilities. Material -solid brass.
10 Lockwood Entrance Handles 141 A B1 B2 C D E 141X300SSS 300mm 22mm 40mm 45mm 450mm 25mm 141X450SSS 450mm 22mm 40mm 45mm 600mm 25mm 141X600SSS* 600mm 22mm 40mm 45mm 750mm 25mm * Pictured 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole E B 142 A B C D E 142X300SSS 300mm 32mm 45mm 450mm 25mm 142X450SSS 450mm 32mm 45mm 600mm 25mm 142X600SSS* 600mm 32mm 45mm 750mm 25mm * Pictured A D 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole E C 143 A B1 B2 C D 143X300SSS 300mm 30mm 15mm 35mm 315mm 143X450SSS 450mm 30mm 15mm 35mm 465mm 143X600SSS* 600mm 30mm 15mm 35mm 615mm * Pictured D A C 2 x 62mm M6 Bolts - 8.5mm hole 2 x 32mm M6 Bolts - 13mm hole B2 B1
11 Lockwood Entrance Handles 145 A B C D E 145X225SSS 225mm 25mm 45mm 300mm 19mm 145X375SSS 375mm 25mm 45mm 450mm 19mm 145X525SSS* 525mm 25mm 45mm 600mm 19mm * Pictured D A C 2 x 70mm M8 Bolts - 8.5mm hole 2 x 30mm M8 Bolts - 13mm hole E B B 146 A B C D E F 146X450SSS 450mm 25mm 60mm 475mm 60mm 25mm 146X600SSS* 600mm 25mm 60mm 625mm 60mm 25mm * Pictured D A 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole B C E F 147 A B C D E 147X450SSS 450mm 19mm 45mm 600mm 19mm 2 x 62mm M8 Bolts - 8.5mm hole 2 x 32mm M8 Bolts - 13mm hole
12 Lockwood Entrance Handles 151 A B C D E 151X3000SSS 300mm 32mm 80mm 332mm 200mm 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole 192 A B C D 192X450SSS 450mm 32mm 85mm 482mm 192X600SSS 600mm 32mm 85mm 632mm B A D 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole C 231 A B C D E 231X3000SSS 300mm 32mm 85mm 332mm 140mm 2 x 80mm M8 Bolts - 8.5mm hole 2 x 40mm M8 Bolts - 13mm hole
13 Flush Pulls Features and Specifications Zinc alloy cast flush pulls Available in a range of three sizes and three finishes Display packed, complete with fixing screws Product Dimensions Finishes Packaging Part Number L x 30mm Chrome Plate Display pack L609CPDP Polished Brass Plate Display pack L609PBPDP 85 Satin Chrome Pearl Display pack L609SPDP Product Dimensions Finishes Packaging Part Number L x 35mm Chrome Plate Display pack L611CPDP Polished Brass Plate Display pack L611PBPDP Satin Chrome Pearl Display pack L611SPDP 115 Product Dimensions Finishes Packaging Part Number L x 40mm Chrome Plate Display pack L610CPDP Polished Brass Plate Display pack L610PBPDP Satin Chrome Pearl Display pack L610SPDP 145
14 Handles Cast Brass Handle Cast brass handle, visible fixing Display packed, complete with fixing screws Product Length Finishes Packaging Part Number L mm Chrome Plate Display pack L9-150CPDP Satin Chrome Pearl Display pack L9-150SPDP Extruded Brass Handle Extruded brass handle, concealed fixing Display packed, complete with fixing screws Product Length Finishes Packaging Part Number L70 100mm Satin Chrome Pearl Display pack L70SPDP
Push and Pull Door Furniture. Plate Door Furniture Door Furniture and General Hardware
Plate Door Furniture Push and Pull Door Furniture Door Furniture and General Hardware 3.109 184 Offset Pull Made from brass and designed to compliment 1800 and 2800 Series Brass Plate Furniture, the 184
Push/Pull Door Handles
Push/Pull Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 184 Brass Furniture 185 Brass Furniture 194 Series Offset Pull 214/215
Push/Pull Door Handles
Push/Pull Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 184 Brass Furniture 185 Brass Furniture 194 Series Offset Pull 214/215
Artefact Series II Door Furniture. Keeler Hardware. telephone
Artefact Series II Door Furniture AA ABLOY, the global leader in door opening solutions Contents Lockwood Door Furniture Handing Convention 2 Square Corner Plates 3 10mm Radius Corner Plates 5 Round End
Plate Door Furniture. Plate Door Furniture Door Furniture and General Hardware
Plate Door Furniture Door Furniture and General Hardware 3.71 1800 Series Square End Plate Furniture For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed
Securafix. Keeler Hardware. Securafix. Lockwood Catalogue. telephone
Lockwood Catalogue ASSA ABLOY, the global leader in door opening solutions 2 Contents General information 1 3670 Series 3 1800 Series Square End Mortice Latch Furniture with 4 2800 Series Round End Mortice
Plate Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries.
Plate Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au We take the worry out of protecting what s valuable to you. Lockwood: no worries Contents
Auxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
Screen Door Locks. Mechanical Locking Solutions. Window Locks. Lockwood Product Catalogue 1300 LOCK UP ( ) lockweb.com.au 2.
Screen Door Locks Window Locks Mechanical Locking Solutions Lockwood Product Catalogue 2.193 CYL4 Technology CYL4 Technology enables one key convenience. One key for your home, to operate doors and windows.
Window Locks. We take the worry out of protecting what s valuable to you. Lockwood: no worries.
We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 785 CYL4 Sliding Window Lock 880 CYL4 Multi Purpose Bolt 885 CYL4 Awning Window Lock Sash Fastener
Kaba Door Furniture. AS1428 Design for Access and Mobility
Kaba Door Furniture AS1428 Design for Access and Mobility Kaba Australia has been designing and developing door furniture in Australia for over 30 years. Our extensive range includes a wide selection of
4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS
The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets are designed and manufactured for use in commercial buildings, including hotels and offices, but are also ideal for residential entrances and
Architectural Solutions
Architectural Solutions Kaba - since 1862 Kaba since 1862 The Kaba Group runs operations in more than 60 countries and employs a workforce of around 10,000. As the technological forerunner Kaba develops
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
Silver Kite Architectural Ironmongery - Classic Range Mortice Knobs - 1 of 6
Mortice Knobs - 1 of 6 34020 34021 34022 34023 34020 Mortice knob knob diameter 66 rose diameter 66 34021 Mortice knob knob diameter 57 rose diameter 58 34022 Mortice knob knob diameter 49 rose diameter
HOPPE (UK) Ltd. Introducing ARRONE Plus Anti-Ligature Range. About HOPPE (UK) Ltd ARRONE
Anti-Ligature Range HOPPE (UK) Ltd Introducing ARRONE Plus Anti-Ligature Range It is a generally accepted statistic, supported by government figures, that several thousand people are seriously or fatally
Lockwood Security Products Pty Limited. Brass Door. Furniture
Lockwood Security Products Pty Limited Brass Door Furniture Plates & Roses Style and versatility are combined in this range which comprises seven architecturally designed plates and roses which give you
2900 Series Mortice Lock Furniture
Mortice Lock Furniture Harm Minimisation and Vandal Resistant Door Furniture Mortice Lock Furniture Kaba Australia has been designing & developing Door furniture in Australia for over 30 years. In using
Ovation Series Door Furniture. ASSA ABLOY, the global leader in door opening solutions
Ovation Series Door Furniture AA ABLOY, the global leader in door opening solutions Contents Ovation General Information 1 Ovation Lever Furniture 3 Ovation Escutcheons and Turns 4 Privacy Adaptor 5 Thicker
Weatherfold 4s 50 & Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium
- Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium This Guide to Quantities is only applicable to Data Sheets E1 and E130. Specification for Individual Panels Track
SIMPLICITY SERIES. Affordable hardware for multi-residential developments made easy.
SIMPLICITY SERIES Affordable hardware for multi-residential developments made easy. i An ASSA ABLOY Group brand Contents Simplicity Series Kit Simplicity Series Leversets Simplicity Series Door Escutcheons
Door Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
Keeler Hardware. telephone Brass Door Furniture. ASSA ABLOY, the global leader in door opening solutions
Brass Door Furniture ASSA ABLOY, the global leader in door opening solutions Contents Lockwood Brass Door Furniture Overview 1 2 Lockwood Door Furniture Conventions 3 1220/1221 Symphony Series Rose Furniture
Available in two PVD finishes
PVD, low maintenance, weather resistant finish Available in 5 functions Easy to fit Hexagonal bevelled handle and lock case Tumbler alignment for easy code change Key bypass option may be specified on
door & window furniture
1 door handles 160 door furniture 169 door security 179 door stops 186 window furniture 188 159 order online at www.hinges.co.uk door handles NO.680/V NO.681/V SOLID BRASS VICTORIAN STRAIGHT LEVER LATCH
Architectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
Architectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
HB MM LENGTH HALLIDAY & BAILLIE CAVITY SLIDING PRIVACY SYSTEM FOR TIMBER SLIDERS
HB690-170MM LENGTH HALLIDAY & BAILLIE CAVITY SLIDING PRIVACY SYSTEM FOR TIMBER SLIDERS Privatise a room with the Halliday & Baillie Privacy System Very discrete emergency release mechanism This system
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
Sliding and Pocket Door Hardware
Sliding and Pocket Door Hardware available in the US through 877-777-0592 www.index d.com Premium quality pocket door locks and trim offered in 2 ½, 2 ¾, 3 ¾, 5 and 6 backsets custom backsets also available
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer of solid stainless
Architectural Door Furniture
Architectural Door Furniture ALCOM Architectural Door Furniture Acclaimed for the production and supply of premium affordable security solutions, Australian Lock Company is proud to expand its product
PHASE 1 OVERVIEW OF ADDITIONS & UPDATES
PHASE 1 OVERVIEW OF ADDITIONS & UPDATES (08/17/18) Legacy Family Part Numbers STANDARD PULLS NEW Architectural Pull Family (AP) 1194 Standard sizes 1194 New options added 1195 Standard sizes 1195 New options
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
Door Furniture - Visca
31 Door Furniture - Visca Manufactured in the heart of Italy, Visca is a remarkable collection by some of Europe s most esteemed designers. All Visca products are made of Solid Brass or Stainless Steel
LOCKING SOLUTIONS. Bolts. 680 Patio Door Bolts Flush Bolts. Camlocks and Cupboard Locks. Cupboard Locks Camlocks. Deadbolts and Rimlocks
SECTION B MECHANICAL LOCKING SOLUTIONS B1 B1 B1 B2 - B3 B2 B2 - B3 B3 - B8 B3 B4 B4 - B5 B5 B6 B6 - B7 B7 B8 B8 B9 - B11 B9 B9 B10 B10 B11 Bolts 680 Patio Door Bolts Flush Bolts Camlocks and Cupboard Locks
FINISTA FRENCH DOOR RANGE. Finista French Door Range. > Functional style and security
FINISTA FRENCH DOOR RANGE Finista French Door Range > Functional style and security Finista French Door Range Mortice Locks The Finista brand offers a stylish and contemporary range of products incorporating
PANIC & EXIT HARDWARE
CI/SfB (32) Xt7 PANIC & EXIT HARDWARE Uncompromising safety 2 CEN Standards European CEN Standards 1997. There are two standards. - Where panic situations can be foreseen and occupants of the building
PD8000/PD5000 Series. UNISON HARDWARE, INC. (Edition 2) Version: 2016.v1
(Edition 2) PD8000/PD5000 Series UNISON HARDWARE, INC. www.inoxproducts.com Version: 2016.v1 TABLE OF CONTENTS PD8000/PD5000 Series Mortise Lock Page 4 How to Order: PD8000 Mortise Locks with Flush Pulls
Locks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
ST9600 SERIES II. Heavy Duty Mortice Locks
ST9600 SERIES II Heavy Duty Mortice Locks TABLE OF CONTENTS ST9600 Series II Features. 3 ST9600 Series II Technical Details. 4 ST9600 Series II Ordering Guide 5 ST9600 Series II Mortice Night Latch. 6
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
BJ WALLER ARCHITECTURAL IRONMONGERS. B J Waller Limited DOOR HARDWARE
B J Waller Limited DOOR HARDWARE Levers on Roses Peterhouse Designer Levers on Roses 45.10103 Peterhouse Designer Lever on 50x8mm Rose CP 45.10113 Peterhouse Designer Lever on 50x8mm Rose SC Trinity Designer
DORMA Coastal Series. 316 Solid Stainless Steel Door Furniture
DORMA Coastal Series 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES Solid Stainless Steel Rose and Plate Door Furniture DORMA in Australia and New Zealand is developing into a leading manufacturer
BS 5 lever mortice locks
BS 5 lever mortice locks UNION Architectural Hardware is proud to announce the new British Standard 5 lever mortice lock - UNION StrongBOLT UNION StrongBOLT features radius inner forends for ease of first
BOLOTA 316 OTHER PRODUCT RANGES SERVICE
BOLOTA 316 BOLOTA 316 OTHER PRODUCT RANGES SERVICE INDEX Lever Handles Escutcheons & Bathroom Turns Academy Range Pull Handles Push Plates & Kick Plates Signage Lockcases Cylinders Door Controls Hinges
PD8000/PD5000 Series. (Edition 3) NEW RELEASE SUMMER UNISON HARDWARE, INC. Version: 2016.v3
(Edition 3) PD8000/PD5000 Series NEW RELEASE SUMMER 2016 UNISON HARDWARE, INC. www.inoxproducts.com Version: 2016.v3 TABLE OF CONTENTS INOX PD8000/PD5000 Series Mortise Locks Page 1 Description, Parts
Introduction to Allgood Washroom
Introduction to Allgood Washroom 16. grabrails contents 1. introduction P.06 5. Spare toilet roll holders 2. Added value P.08 P.14 8. Towel rails P.20 11. Buffered coat hooks 12. Cabinet knobs handles
Contents 2000 Series 3000 Series 5000 Series Marine Grade Series Gate Lock Series Accessories Measurments Quick Selection Guide
Borg Locks, market leader in the innovative design and manufacture of high quality mechanical access controls. With an emphasis on functionality, performance and quality the Borg range of access controls
TABLE OF CONTENTS SHOWER HANDLES SHOWER KNOBS ES1 WALL MOUNT ES2 GLASS-TO-GLASS ES2-135 GLASS-TO-GLASS 135 ES2-90 GLASS-TO-GLASS 90
2014 Hinges Handles Knobs helensvilleglass.co.nz TABLE OF CONTENTS HINGES ES1 WALL MOUNT ES2 GLASS-TO-GLASS ES2-135 GLASS-TO-GLASS 135 ES2-90 GLASS-TO-GLASS 90 HANDLES SH 210/250/300/400/500 DOUBLE D PULL
Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1
Izerwaren Order number 51.004 Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1 Flush Door Lever Handle, for use with entry set with Profile Cylinder 304 Stainless Steel 100
2000/2100/2200 Series
2000/2100/2200 Series This comprehensive selection of pivoting bolt deadlocks is designed to suit narrow stile hinged and sliding doors. The 2000 Series encompasses deadlocks with 22mm and 36mm bolt projection,
Door accessories. Hinges Accessories Grab rails Door plates Information Signage
Door accessories Hinges Accessories Grab rails Door plates Information Signage Hinges 4 Accessories 8 Grab rails 11 Door plates 12 Information signage 16 Hinges DBB-SS-009 Two Ball Bearing Butt Hinge
Weatherfold 4s 50, 75 & 100
Codes Weatherfold 4s 50, 75 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: sales@brio.com.au Brio RMD UK Ltd. P: +44 191 2291224 W: briouk.com E: sales@briouk.com INSTBWS1 REV D - NOV 2011 Brio
D&E door knockers - scroll
D&E door knockers - scroll D&E scroll door knocker DESDK6/BK scroll door knocker black DESDK6/EPB scroll door knocker electro-phoretic brass DESDK6/PC scroll door knocker pol. chrome* DESDK6/WT scroll
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
Drake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
RestoRation.
RestoRation Door Furniture and Accessories Other Door Accessories and Fittings Hinges Cabinet Hardware Window Hardware Hooks Stair Fittings and Accessories Alphabet and Numerals www.delfarchitectural.com.au
Aurora Door Concepts Practicality in Design
Aurora Door Concepts Practicality in Design Aurora Door Concepts This collection of commercial doors and related accessories has been designed to enhance our partition suites. The range has evolved due
Testing and CE Marking
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Testing and CE Marking In distinct contrast to the modular nature of the Briton 560-0 Series, the long established
Material Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
Section 7 Wooden Door Locks
Section 7 Wooden Door Locks file:///l /CATALOGUES/General J an 2009/c us tom er/purdue/catalog/pic ture Library /Wooden Door/Leggelatc h.jpg SASH LOCKS COMMERCIAL VERSION- CxC 57mm Specification Technical
Mast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
FOR SHELF UP TO 305mm (12") WIDE & ROD UP TO 38mm (1-1/2") DIAMETER
12 (305mm) 10-3/8 (263mm) ADJUSTABLE SHELF FOR SHELF UP TO 305 mm (12") WIDE & ROD UP TO 38 mm (1-1/2") DIAMETER 9-27/32 (250mm) ADJUSTABLE SHELF & ROD SUPPORT bk 25-2800 20 FOR SHELF UP TO 305mm (12")
PH HA22 PH HA22 PH HA23
CH-SB... HA4 CH-SC... HA4 CH-SD... HA4 CH-SE... HA4 DH-20011... HA5 DH-20021... HA5 DH-20031... HA5 DH-20041... HA5 DH-20051... HA5 DH-20061... HA5 DH-20211... HA6 DH-20221... HA6 EHB001... HA15 EHB002...
Pre-Hanging Information
Pre-Hanging Information Difference between Door Slab and Pre-hung Door Door Slab Only Door Slab Only No handle preparation. No deadbolt preparation. No frame or hinges included. Pre-hung door Door unit
H E R I T A G E Issue 11
HERITAGE Issue 11 Introduction Welcome to the new edition of our Denleigh Heritage catalogue. As you browse the pages of this catalogue you will see the breath of the Denleigh Heritage range which offers
Standard push bar panic and emergency exit devices.
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Standard push bar panic and emergency exit devices. In distinct contrast to the modular nature of the Briton 560-0
COBURN SLIDING SYSTEMS
Coburn Centafold & Foldaside COBURN SLIDING SYSTEMS Foldaside and Centafold Door Systems FOR INTERIOR FOLDING PARTITIONS A comprehensive range of sliding door fittings for timber folding partitions either
EUROPEAN SPECIFICATION. UNISON HARDWARE, INC. Version:
EUROPEAN SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS Door Stops Pocket Pulls Flush Bolts Numerals/Letters Cylinder Pull Push Plate Coat Hook Signs Door Viewer
SLIDING DOOR LOCKS MISCELLANEOUS
MISCELLANEOUS SLIDING DOOR We offer the BEST delivered prices on this NEW pocket door hardware of any dealer, big discounts off the MSRP prices listed here. Give us a call toll free at (888) 3062298 or
Grade 2 Medium Duty Cylindrical Key-In-Lever Lock Product Catalog. Z Series
Grade 2 Medium Duty Cylindrical Key-In-Lever Lock Product Catalog Non-Handed Catalog Rim Devices Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering
Headline. Push/Pull Latches
Headline Push/Pull Latches Quality hardware for superior door control 2 Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Glynn-Johnson uses only state-of-the-art
SECURITY. Window Security Products.
SECURITY Lock Cases and Accessories Window Security Products Latches and Bolts Surface Mount Bolts PRODUCT GUARANTEE INFORMATION Delf Architectural provides a 5 year limited mechanical guarantee on all
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors About us Brio, based in Australia, is focused on bringing adventurous architectural ideas to life,
WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code
WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish 3 5 15 17A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA
Brio. Weatherfold 4s 150. Codes B WS S H PR. Sets note codes do not show finish, hinge sets not shown to same scale. Brio Weatherfold 4s
INSTBWSH1 REV G - MAR 2018 Brio Codes Weatherfold 4s 150 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
Toilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
Interfold 35 With or Without Guide
INSTBWSLI2 REV G - MAR 2017 Interfold 35 With or Without Guide Codes Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: + 191 229122 W: briouk.com E: brio.sales.uk@allegion.com
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER
Weatherfold 4s 50 & 100 Brio Australia P: W: brio.com.au
Codes INSTBWS2 REV J - MAR 2017 Weatherfold 4s 50 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
where ideas unfold Exterior folding hardware for panels up to 150kg
where ideas unfold Exterior folding hardware for panels up to 150kg 2 About us Brio where ideas unfold Watch your adventurous architectural ideas unfold into exciting reality with the Brio range of sliding
Lever Action Flush Bolts
ever Action Flush Bolts Two types of ever Action Flush Bolt for edge or face fitting into the first closing leaf of a double door set - both offered in two widths (19mm & mm), a variety of lengths, and
HORIZON EXCLUSIVE SOLID BRASS DOOR FURNITURE
HORIZON EXCLUSIVE SOLID BRASS DOOR FURNITURE Oria Lever on Rose Contents HORIZON Exclusive Door Furniture created from premium solid forged brass components. Levers on Rose Escutcheons 5 12 Fitting Instructions
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
SECURITY. Lock Cases and Accessories Latches and Bolts Surface Mount Bolts Window Security Products.
SECURITY Lock Cases and Accessories Latches and Bolts Surface Mount Bolts Window Security Products www.delfarchitectural.com.au Product Guarantee Information Delf Architectural provides a 5 year limited
Pull Handles. All dimensions in mm 7.1
Gainsborough continues to evolve its offering of pull handles to include various sizes, opening configurations and styles. Pull handles are available in 300mm, 370mm, 450mm, 520mm, 600mm, 750mm, 900mm
INTRODUCING GRUPPO ROMI LTD.
www.grupporomi.com INTRODUCING GRUPPO ROMI LTD. We are a leading manufacturer and exporter of distinct hardware for the home located in Argentina. Our designs include a vast array of architectural, decorative,
Main Index. Main Index. Main Index INDEX. Door Furniture & Accessories Door Closers UPVC Locking & Furniture
Main Index Main Index Door Furniture & Accessories -50 Door Closers 5-68 UPVC Locking & Furniture 69-90 Hinges 9-02 Exit Hardware 03-6 Ironmongery 7-26 Bolts & Bars 27-40 Window Fittings 4-48 Sliding &
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 005-07 Cadillac STS Classic 3D Z, Classic Dual Weave, Classic Mesh & Classic Black Mesh Grilles B 7 HR 3 STS Classic 3D Z Grille Part
Ironmongery. Exterior Hinge. Cylinder Pull. Door Viewer. Sash Lock. Door Knocker. Handle. Letter Plate. Finger Plate. Hook. Handle. For External Doors
Ironmongery We offer a comprehensive range of Ironmongery, Fittings, and Fixings to suit every job all are designed and manufactured to suit the relevant British Standards where appropriate. External and
Introduction to Ashley Norton 2009
Introduction to Ashley Norton 2009 Introduction to Ashley Norton Overview Manufacturer of architectural door hardware with two key product lines Solid Brass Collection Solid Bronze Collection Operating