Architectural Supports

Size: px

Start display at page:

Download "Architectural Supports"

Thomasina Waters
6 years ago
Views:

1 Architectural Supports 1

2 Zip-Clip - A Global Brand Copyright of Zip-Clip Ltd 2016 All descriptions and illustrations in this manual are intended for guidance purposes only. Zip-Clip Ltd reserves the right to change the information, products and specifications in this manual for a variety of reasons, without prior notice. The information in this manual is provided as is at the date specified on the back cover. Updates will not be issued automatically. 2

3 3

4 About ZIPCLIP The Zip-Clip range of decorative wire supports combine high tensile strength wire with ergonomic locking devices giving an aesthetic look. All devices are made from nickel plated brass to give that polished finish. The systems are quick to install and offer the installer the ability to build wire rope supports which have a very low visual impact. All systems are fully adjustable and also combine a locking mechanism for safety and ease of use. The range is available with a selection of fixing ends to support from different base materials. This will enable you to build a support to your requirements and connect to your intended fixture. Zip-Clip architectural supports are designed for static loads only. 4

5 5

0mm Slit width 2 mm Designed for lightweight applications PRODUCT CODE ACSL3W1G/300LM ACSL3W2G/300LM ACSL3W3G/300LM ACPLCAK3W1G/300LM ACPLCAK3W2G/300LM ACPLCAK3W3G/300LM ACPLEK3W1G/300LM

6 ARCHITECTURAL Y HANGER Architectural support used to create an inverted Y Shape wire support. Ideal for fixtures with wide fixing centres. Product Code AC3WAY Safe Working Load 15kg with 5:1 Safety Factor Length 37.0mm Diameter 9.0mm Slit width 2 mm Designed for lightweight applications PRODUCT CODE ACSL3W1G/300LM ACSL3W2G/300LM ACSL3W3G/300LM ACPLCAK3W1G/300LM ACPLCAK3W2G/300LM ACPLCAK3W3G/300LM ACPLEK3W1G/300LM ACPLEK3W2G/300LM ACPLEK3W3G/300LM DESCRIPTION 1 Mtr 3 way support with architectural fixing 300mm legs 2 Mtr 3 way support with architectural fixing 300mm legs 3 Mtr 3 way support with architectural fixing 300mm legs 1 Mtr 3 way support with concrete fixing 300mm legs 2 Mtr 3 way support with concrete fixing 300mm legs 3 Mtr 3 way support with concrete fixing 300mm legs 1 Mtr 3 way support with loop fixing 300mm legs 2 Mtr 3 way support with loop fixing 300mm legs 3 Mtr 3 way support with loop fixing 300mm legs To be used in conjunction with toggles. Allows for one single suspension point from the ceiling. Available with side exit which allows for height adjustment at service level. Fully lockable for safety. Can be supplied with a variety of ceiling fixings. Available in kit format: lengths from 1-3 metres. Requires 2.5mm hex key to adjust toggle legs. Installation: Unscrew lockable plunger anti clockwise allowing it to actuate, do not unscrew fully. Feed vertical wire support through top of the plunger until it appears at the side exit. Pull wire through side exit allowing a tail of 75mm minimum. Now screw lockable plunger clockwise to lock off the device. Levelling the fixture: Use a 2.5mm hex key bit to loosen the grub screw located in the base of the device, do not unscrew fully. Move inverted Y shape wire until fixture is level. Tighten grub screw clockwise to lock Y shape wire into place, do not over tighten. 6

M6 MALE ARCHITECTURAL SUPPORT Designed for lightweight fixtures or fittings with a M6 female thread. Ideal for installing into lighting track.

7 M6 MALE ARCHITECTURAL SUPPORT Designed for lightweight fixtures or fittings with a M6 female thread. Ideal for installing into lighting track. Product Code ACMGM6S Safe Working Load 15kg with 5:1 Safety Factor Length 43.0mm Diameter 8.9mm Thread dia. M6 M5 also available on request Available with side exit allowing for height adjustment at fixture level. Fully lockable for safety. Can be supplied with a variety of ceiling fixings. Available in kit format: lengths from 1-3 metres. Installation: Fully screw male thread clockwise into female thread, Or, Pass male thread into a through hole and use integral nut and washer to lock into place. Unscrew lockable plunger anti clockwise allowing it to actuate, do not unscrew fully. Feed vertical wire support through top of the plunger until it appears at the side exit. Pull wire through side exit allowing a tail of 75mm minimum. Now screw lockable plunger clockwise to lock off the device. Designed for lightweight applications PRODUCT CODE ACSLM6MS1G ACSLM6MS2G ACSLM6MS3G ACPLCAKM6MS1G ACPLCAKM6MS2G ACPLCAKM6MS3G ACPLEKM6MS1G ACPLEKM6MS2G ACPLEKM6MS3G DESCRIPTION 1 Mtr single lighting suspension male thread M6 architectural end 2 Mtr single lighting suspension male thread M6 architectural end 3 Mtr single lighting suspension male thread M6 architectural end 1 Mtr single lighting suspension male thread M6 concrete end 2 Mtr single lighting suspension male thread M6 concrete end 3 Mtr single lighting suspension male thread M6 concrete end 1 Mtr single lighting suspension male thread M6 loop end 2 Mtr single lighting suspension male thread M6 loop end 3 Mtr single lighting suspension male thread M6 loop end 7

M10 MALE ARCHITECTURAL SUPPORT Designed for lightweight fixtures or fittings with a M10 female thread. Ideal for installing into recessed lights.

8 M10 MALE ARCHITECTURAL SUPPORT Designed for lightweight fixtures or fittings with a M10 female thread. Ideal for installing into recessed lights. Product Code ACMGM10B Safe Working Load 15kg with 5:1 Safety Factor Length 25.7mm Diameter 10.0mm Thread dia. M10 Leaves a low profile once installed ACSLM10MB1G ACSLM10MB2G ACSLM10MB3G ACPLCAKM10MB1G ACPLCAKM10MB2G ACPLCAKM10MB3G ACPLEKM10MB1G ACPLEKM10MB2G ACPLEKM10MB3G 1 Mtr single lighting suspension male thread M10 architectural end 2 Mtr single lighting suspension male thread M10 architectural end 3 Mtr single lighting suspension male thread M10 architectural end 1 Mtr single lighting suspension male thread M10 concrete end 2 Mtr single lighting suspension male thread M10 concrete end 3 Mtr single lighting suspension male thread M10 concrete end 1 Mtr single lighting suspension male thread M10 loop end 2 Mtr single lighting suspension male thread M10 loop end 3 Mtr single lighting suspension male thread M10 loop end Available with through exit which allowing for height adjustment at fixture level. Bottom exit. Fully threaded body leaves low profile once installed. Fully lockable for safety. Can be supplied with a variety of ceiling fixings. Available in kit format: lengths from 1-3 metres Installation: Fully screw male thread clockwise into female thread, Or, Pass male thread into a through hole and use integral nut and washer to lock into place. Unscrew lockable plunger anti clockwise allowing it to actuate, do not unscrew fully. Feed vertical wire support through top of the plunger: Please note through exit directs wire into your fixture. Ensure fixture will accommodate redundant wire. Push a minimum of 75mm of wire through the device before locking off. Now screw lockable plunger clockwise to lock off the device. 8

9 ARCHITECTURAL SUPPORT WITH FEMALE THREAD Versatile fitting designed to attach to lightweight fixtures or fittings with a M6 male thread. Product Code ACFGM6S Safe Working Load 15kg with 5:1 Safety Factor Length 35mm Diameter 9mm Hole Depth: 7mm Available with side exit which allowing for height adjustment at fixture level. Fully lockable for safety. Can be supplied with a variety of different ceiling fixings. Or, Can be inverted itself to attach to the ceiling with an M6 stud. Allows for height adjustment at ceiling or service level. Can be utilised with a bolt & washer to clamp onto an M6 through hole. Available in kit format: lengths from 1-3 metres. Installation: If installing into a fixture, screw locking device clockwise onto suitable M6 male thread until tight. Male thread must be 7.0mm minimum. If installing into the ceiling, first ensure a suitable fixing has been installed with a M6 thread eg dual threaded bolt. Screw locking device clockwise onto the male thread until tight. Attach device onto M6 through hole using M6 bolt and washer. Screw bolt clockwise ensuring it is tight. Designed for lightweight applications. Can also be used to attach to the ceiling with a suitable M6 threaded fixing. PRODUCT CODE ACSLM6F1G ACSLM6F2G ACSLM6F3G ACPLCAKM6F1G ACPLCAKM6F2G ACPLCAKM6F3G ACPLEKM6F1G ACPLEKM6F1G ACPLEKM6F1G DESCRIPTION 1 Mtr single lighting suspension female thread M6 architectural end 2 Mtr single lighting suspension female thread M6 architectural end 3 Mtr single lighting suspension female thread M6 architectural end 1 Mtr single lighting suspension female thread M6 concrete end 2 Mtr single lighting suspension female thread M6 concrete end 3 Mtr single lighting suspension female thread M6 concrete end 1 Mtr single lighting suspension female thread M6 loop end 2 Mtr single lighting suspension female thread M6 loop end 3 Mtr single lighting suspension female thread M6 loop end 9

M6 CEILING FIXING WITH SLOT Architectural ceiling fixing designed to give a sleek tidy attachment to the soffit Product Code ACSLOTM6 Safe Working Load 15kg with 5:1 Safety Factor Length 21.

10 M6 CEILING FIXING WITH SLOT Architectural ceiling fixing designed to give a sleek tidy attachment to the soffit Product Code ACSLOTM6 Safe Working Load 15kg with 5:1 Safety Factor Length 21.7mm Diameter 15mm Thread dia. M6 Can be fitted to a ceiling or fixture and used in conjunction with the Zip-Clip range of architectural supports PRODUCT CODE ACSL1G ACSL2G ACSL3G DESCRIPTION 1 Mtr single dome suspension M6 2 Mtr single dome suspension M6 3 Mtr single dome suspension M6 Two part fitting consisting of: 1. M6 Female threaded base plate. 2. Internally threaded dome cover to encapsulate the wire support. Low visual impact. Slot allows rotation of the wire through an angle (max 60 degrees). Base plate can be fixed to the ceiling using M6:»» Dual threaded screw with M6 stud.»» Wood screw.»» Concrete screw.»» Plug and screw. Base plate and cover marry together to form one complete fitting with the same diameter. Installation: Disassemble base plate by turning anticlockwise. Fix base plate to ceiling using desired fixing. Ensure wire is correctly set inside the dome. Screw dome onto base plate by turning clockwise. Ensure dome is secure. 10

BARRELL CEILING FIXING Architectural ceiling fixing designed to give a sleek tidy attachment to the soffit Product Code ACBPLATE Safe Working Load 15kg with 5:1 Safety Factor Length 20mm Diameter

11 BARRELL CEILING FIXING Architectural ceiling fixing designed to give a sleek tidy attachment to the soffit Product Code ACBPLATE Safe Working Load 15kg with 5:1 Safety Factor Length 20mm Diameter 16mm Two part fitting consisting of: 1. Base plate with 4.4mm through hole (not threaded). 2. Internally threaded dome cover to encapsulate the wire support. Low visual impact. Base plate can be fixed to the ceiling using countersunk fixing: Wood screw. Concrete screw. Plug and screw. Base plate and cover marry together to form one complete fitting with the same diameter. Can be fitted to a ceiling or fixture and used in conjunction with the Zip-Clip range of architectural supports PRODUCT CODE ACBPL1G ACBPL2G ACBPL3G DESCRIPTION 1 Mtr single base plate suspension 2 Mtr single base plate suspension 3 Mtr single base plate suspension Installation: Disassemble base plate by turning anticlockwise. Fix base plate to ceiling using desired fixing. Ensure wire is correctly set inside the barrel. Screw barrel onto base plate by turning clockwise. Ensure barrel is secure. 11

12 Dyffryn Industrial Estate, Newtown, Powys, SY16 3BD, UK +44 (0) (0)

Hawko Zhaga Systems Installation Instructions

Hawko Zhaga Systems Installation Instructions Contents Wire Suspension Installation 4 Recessed Brackets 6 Fixed Suspension Rods 8 Swivel Suspension Rods 10 Surface Mount Ceiling 12 Surface Mount Wall