Carbon Fibre Scissors
|
|
- Christian Parsons
- 6 years ago
- Views:
Transcription
1 Carbon Fibre Scissors A range of shears specifically designed to work with modern technical fibres used in an ever increasing range of product from ballistic protection, aerospace, automotive through to wind turbines, roofing etc Developed with innovators in industry to ensure maximum performance 1. What makes good scissors? A quality scissor will generally be made of "Hot Forged" high carbon steel, hardened and tempered. The process of forging the steel in a drop hammer strengthens the crystal structure of the steel, the hardening is a scientifically controlled process further enhanced by tempering which provides an optimum uniform hardness on the blades prior to grinding. Great care is taken to finish all the surfaces, particularly inside the bows to achieve maximum comfort of use. 2. Choosing the best scissors for the job Using the right scissor ensures that the job will be easier, safer and more effective. The following points will help you choose the most suitable scissor: Choose the size appropriate to the type of job. Big scissors are used for cutting large amounts of material, scissors with short blades and long shanks for cutting through thick material and small sharp scissors for work which requires a high degree of accuracy. Using the wrong size deforms the pivot and reduces the performance and life expectancy of the scissor. Select the biggest pair of scissors that can be comfortably held. Some materials such as Carbon Fibre, Glass Fibre and Aramid (Kevlar) are very difficult to cut using normal scissors. The development of a special range allows these modern materials to be cut successfully through special machining, setting and a Teflon coating. These scissors have a ten-fold cutting life extension when compared to standard scissors. It is not recommended that these scissors be used to cut both glass fibre, Carbon fibre or Kevlar because users have reported a rapid fall-off in performance. If cutting both types of fibre, use one scissor exclusively on each of the three types of fibres.
2 3. Our Range SCF-8SC ~ Carbon Fibre Scissors 20cm / 8 Short Cut Modified grinding and setting adapted to Carbon Fibre material on the lower blade Short cut for difficult/tough operations Suitable for wet & dry processes, trimming in confined spaces Left Handed : (Available on request) Length overall: cm / 8 Length of cut : 5.08 cm / 2 Weight : 192 g
3 SCF-8LC ~ Carbon Fibre Scissors 20cm / 8 Hot forged : steel is heated in a furnace and forged with a drop hammer into the desired shape. It is an expensive process but produces a high quality scissor with excellent grain structure and hardness. Modified grinding and setting adapted to Carbon Fibre material on the lower blade Suitable for wet & dry processes, trimming in confined spaces Left Handed : (Available on request) Length overall: cm / 8 Length of cut: 7.62 cm / 3 Weight : 176 g
4 SCF-10 (LH) ~ Carbon Fibre Scissors 25cm / 10 Hot forged : steel is heated in a furnace and forged with a drop hammer into the desired shape. It is an expensive process but produces a high quality scissor with excellent grain structure and hardness. Modified grinding and setting adapted to Carbon Fibre material on the upper blade Off-set handles for bench operation Suitable for wet & dry processes, all thicknesses Left Handed Available Length overall: 25.4 cm / 10 Length of cut: cm / 4.75 Weight : 431 g
5 SCF-10RP ~ Carbon Fibre Scissors 25cm / 10 Hot forged : steel is heated in a furnace and forged with a drop hammer into the desired shape. It is an expensive process but produces a high quality scissors with excellent grain structure and hardness. Modified grinding and setting adapted to Carbon Fibre material on the upper blade Off-set handles for bench operation Suitable for wet & dry processes, all thicknesses Round Points for increased safety Left Handed : (Available on request) Length overall: 25.4 cm / 10 Length of cut: cm / 4.75 Weight : 431 g
6 4. Maintenance Following these guidelines for maintenance and care for maximum cutting-life and satisfaction : Always use the correct pattern for the job Using an incorrect size or pattern could lead to damage to the scissors, distorting blades and damaging edges rendering the scissors unserviceable. It will almost certainly increase the effort required by the operator to complete the task which also has a bearing on productivity. Wipe the blades of the scissors after use with a soft oily cloth. This extends the life by removing tiny particles of dust and fibre which build up between the blades and also acts as a protection against corrosion on carbon steel patterns. This build-up can also impair the cutting ability. Avoid harsh treatment of the scissors. Dropping them can cause irreversible edge damage if the blades are open. Leather holsters are available which protect both scissor and operator. Keep away from moisture. Steam, humidity and perspiration can cause damage through corrosion. Lifetime and Re-sharpenning : The lifetime of the scissors will depend on the intensity of the work and their maintenance. However, these scissors are made for cutting very aggressive materials; their lifespan may be limited in time if their use is daily and intensive. We do not recommend re-sharpening of the blades; from experience it is has not proved to be cost effective and the quality of the re-sharpened blades are not comparable to a new pair of scissors.
AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS
WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to
More informationCare of Bonsai Tools
Technical Care of Bonsai Tools Written, Illustrated, and First Published in the 1960's by John Patrick of the New Orleans Bonsai Society First Reprinted in the Journal in March, 1987 Edited by Norman Haddrick
More informationIFRC SHELTER TOOL KIT
IFRC SHELTER TOOL KIT PP ROPE ROPE, polypropylene, black, 12mm diam., twisted Diameter: 12mm +/- 0.5mm Length: 30m Weight: 1.9kg Number of strand: 3 minimum Type: twisted Material: polypropylene, no recycled
More informationNABTEB Past Questions and Answers - Uploaded online PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009
PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009 1a. Enumerate TWO safety measures each as regards the use of the following hand tools. 1. Scriber 2. Chisel 3. File 4. Try-square 1. Scriber:
More informationSmall Scraping Plane 05P29.50
Small Scraping Plane 05P29.50 U.S. Des. Pat. D609,548 The Veritas Small Scraping Plane is used for the final smoothing of small, flat surfaces, even if they are highly figured, or small areas of difficult
More informationSPANNERS. An ISO 9001:2000 Certified Company
SPANNERS NVR offers wide range of Spanners, forged from high grade Chrome Vanadium Steel using the latest production methods. NVR Spanners made to DIN, ANSI and ISO Standards meets the latest requirements
More informationTin snips Bolt cutters Pruning shears. Cable shears insulated Cable shears Electricians scissors PVC pipe cutters. Superior quality steel
Shears Tin snips Bolt cutters Pruning shears able shears insulated able shears Electricians scissors PV pipe cutters Secure cut Designed for a secure and accurate cut through sheet steel, concrete reinforcement,
More informationSide Rabbet Plane 05P44.01
Side Rabbet Plane 05P44.01 U.S. Des. Pat. D596,475 The side rabbet plane is a specialty plane used for cleaning up or trimming the sidewalls of rabbets, dadoes or grooves to ensure a perfect fit with the
More informationJomro -Textiltechnik GmbH
Good cutting forever, has the right scissor of good value and price. Article-No. Description 9427/9428 9427 Ring finger scissors, stainless, with plastic handles, straight 9428 Ring finger scissors, stainless,
More informationBullnose Plane 05P42.01
Bullnose Plane 05P42.01 Patent Pending The Veritas Bullnose Plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you ll ever own. Designed for maximum versatility,
More informationSeamers, Folding Tools & Brake
Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws
More informationDX60 Block Plane 05P70.01
DX60 Block Plane 05P70.01 U.S. Des. Pat. D612,701 The body of this block plane by Veritas is ductile cast iron, a material much more durable as well as more stable than gray iron, having been fully stress
More informationScraping Plane 05P29.01
Scraping Plane 05P29.01 U.S. Pat. No. 7,444,750 The Veritas Scraping Plane is used for the final levelling and smoothing of large, flat surfaces, even if they are highly figured, prior to applying a finish.
More informationMiter Plane. U.S. Pat. Nos. 7,603,783 and 7,117,602
Miter Plane U.S. Pat. Nos. 7,603,783 and 7,117,602 The Veritas Miter Plane is essentially a large block plane that can be used for end-grain work, such as chamfers, trimming and fitting moldings, as well
More informationTechnical Information
Technical Information Handling, Inspecting and Fabricating Pilkington Activ Self-Cleaning Glass Pilkington Activ Self-Cleaning Glass has a thin, clear, permanent, pyrolytic Titanium Oxide coating on one
More informationCBN abrasives for demanding grinding applications in automotive, aerospace and oil & gas. TOOLMAKER SOLUTIONS Borazon CBN
CBN abrasives for demanding grinding applications in automotive, aerospace and oil & gas TOOLMAKE SOLUTIONS Borazon CBN BOAZON CBN Hyperion s family of Borazon cubic boron nitride (CBN) products achieves
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationOptimising fabric quality, finishing processes and machinery through the use of fabric objective measurement
Optimising fabric quality, finishing processes and machinery through the use of fabric objective measurement Dr Allan De Boos Australian Wool Innovation What is this talk all about? Fabric quality. The
More informationM A N U A L 6 June 2017
M A N U A L 6 June 2017 What are Protection Films? These films are meant to protect the vulnerable parts of cars, bicycles, motorbikes, etc... They are transparent glossy, so the underlying colour remains
More informationBenjamin Cardoso Le mans le 29/04/2011. WIP Straight Razor
Benjamin Cardoso Le mans le 29/04/2011 Dremeltingpotes.free.fr Cardoso5fr@yahoo.fr WIP Straight Razor Caution: The realization of your Straight Razor will require to resort to tools being capable to cause
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationScraping Plane 05P29.01
Scraping Plane 05P29.01 Patent Pending The Veritas Scraping Plane is used for the final levelling and smoothing of large, flat surfaces, even if they are highly figured, prior to applying a finish. Because
More informationSTEEL SHOTS OR GLASS BEADS : MA1 "THE RIGHT CHIOCE" FOR AUTOMOTIVE
International Conference on Shot Peening and Blast Cleaning STEEL SHOTS OR GLASS BEADS : MA1 "THE RIGHT CHIOCE" FOR AUTOMOTIVE Manish Billore Deptt. of Mechanical Engineering UIT, Barkatullah University
More informationNeva Max. The new anti-reflective coating Maxi protection against life s mini attacks
Neva Max The new anti-reflective coating Maxi protection against life s mini attacks MAXI PROTECTION AGAINST SCRATCHES It doesn t matter how careful a person is with his or her spectacles, today, scratch-resistant
More informationAPPLICATION OF JAC FILMS
1. Important points For reliable results, JAC films are best applied to smooth, dry and clean surfaces (metal, glass, paintwork, plastic etc.). It is essential to ensure that the surface is free from dirt
More informationLaying and maintenance of cement tiles
Laying and maintenance of cement tiles David&Goliath cement tiles are manufactured under licence in the Far East, according to our standards and specifications concerning colour and dimensional stability;
More informationDESIGN FOR POLISHING AND PLATING
DESIGN FOR POLISHING AND PLATING Polishing and plating are generally considered to be a part of finishing process. Polishing processes Conventional polishing In conventional polishing, surface irregularities
More informationThe Safe Use of Metal Work Hand Tools
Metal Work Hand Tool Safety Test The Safe Use of Metal Work Hand Tools Hand Tools are potentially dangerous if used incorrectly. Dos Inform your teacher if tools are damaged or blunt. Always work with
More information2017 Pepe Tools.
1 THE ULTRA RANGE The Pepe Ultra range has a mill for every possible user. Starting with the 90mm for small jobs where space is at a premium. The 110mm combine bigger size and improved flexibility, within
More informationIndustrial and Transportation Business DISTRIBUTOR PRODUCT LINE
Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE 3900 DUCT TAPE 3900 DUCT TAPE MRO (Maintenance and Repair) Construction Trade Shows and Conventions General Industrial Electrical Aerospace
More informationSolid Carbide Tools. Composite Tools. Performance by Design. ISO 9001 Certified Company
Solid Carbide Tools Composite Tools Performance by Design ISO 9001 Certified Company As one of the world s largest manufacturers of solid carbide rotary cutting tools, SGS Tool Company has pioneered some
More informationCurium 19H Installation Instructions & Parts List
Curium 19H Installation Instructions & Parts List Illustration Curium 19H Right Hand Page 1 of 15 01/07/2016 Revision 2.1 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationSmall Plow Plane. U.S. Des. Pat. No. D591,579
Small Plow Plane U.S. Des. Pat. No. D591,579 The Veritas Small Plow Plane is a joinery plane, perfect for cutting grooves, such as used for drawer and box bottoms, cabinet backs, and frame-and-panel construction.
More informationGLASS HEAT TREATMENT MULTIVER GLASS TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS. DATA SHEET / Quebec. Version 2.
MULTIVER GLASS GLASS HEAT TREATMENT TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS DATA SHEET / Quebec Version 2.1 Type of Glass Offered by Multiver TEMPERED GLASS To increase the
More informationvoice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa innovations
voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa 1925. 58 Fiber Optic Cable Operators once placed all telephone calls. Now many phone systems direct you
More informationSGG PLANILAQUE EVOLUTION. Lacquered glass installation and use instructions
SGG PLANILAQUE EVOLUTION This document contains important instructions and information regarding use of SGG PLANILAQUE EVOLUTION. Lacquered glass installation and use instructions WER.1.0 September 2015
More informationBeautiful Women Design by Marcel Wanders
Beautiful Women Design by Marcel Wanders Beautiful Women by Marcel Wanders signals the return of a type of furniture that has all but disappeared. The series consists of a mirror with a richly decorated
More informationINSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: IMPORTANT INFORMATION
INSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: To achieve a safe and long lasting Ekodeck installation, it is important to read the following guide in full. Be used as a structural or load bearing
More informationInstallation Instructions
Installation Instructions Building Design and Construction To ensure adequate performance and longevity, protect metal panels from potentially corrosive situations and materials. When treated lumber will
More informationLUXAR Anti reflective coated glass Handling Procedures for LUXAR
LUXAR Anti reflective coated glass Handling Procedures for LUXAR - 1-29.03.99 Table of contents 0. Introduction of LUXAR 1. Transportation / Packing 2. Storage 3. Handling / Cutting 4. Treatment 5. Washing
More informationVIEWpanel Technical Manual
VIEWpanel Technical Manual VIEWpanel is a prefabricated panel comprising 0.21 aluminium skin (1100 alloy) both sides, apart from our lite grade, which is 0.12 aluminium skin both sides and a polyethylene
More informationOptimising fabric quality, finishing processes and machinery through the use of fabric objective measurement. Irene Slota CSIRO
Optimising fabric quality, finishing processes and machinery through the use of fabric objective measurement Irene Slota CSIRO What is this talk all about? Fabric quality. The role of finishing in optimising
More informationCurium 19.4H Installation Instructions & Parts List
Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationSPACER APPLICATION: KEY POİNTS FOR HİGH QUALİTY İG UNİTS
SPACER APPLICATION: KEY POİNTS FOR HİGH QUALİTY İG UNİTS Application of spacer should be in clean and indoor area. Glass washing machine, hot press machine and spacer application table should be in the
More informationCustom Bench Plane. Honing and Polishing the Blade. Blade Carrier
Custom Bench Plane U.S. Pat. No. 7,603,783 Your Veritas bench plane has been assembled with the component options you selected when you placed your order. Caution: Be aware that the blade is sharp; careless
More informationRay RAY CHAIR, CONFERENCE CHAIR, LOUNGE EASY CHAIR, LOUNGE HIGH BACK CHAIR, OTTOMAN & TABLE
Ray Ray A family of chairs and tables that transform spaces into comfort zones. RAY CHAIR, CONFERENCE CHAIR, LOUNGE EASY CHAIR, LOUNGE HIGH FEATURES With a clear design, the Ray family of chairs and tables
More informationUNPACK & ASSEMBLY. Done! CAUTION! THE MILL WILL BE VERY HEAVY - GET ASSISTANCE Pepe Tools.
PARTS DIAGRAM T Bar Height adjustment Wooden hand grip Height adjustment gears Frame Height adjustment screws Top roller End Gears cover Handle Brass Bushes (Each side) Bottom roller 4:1 Gearbox Mounting
More informationGrinding and polishing discs COMBIDISC Corundum A Abrasive disc holders
. Grinding and polishing tools //.9. Emery and fleece tools Grinding and polishing discs COMBIDISC Corundum A Abrasive disc holders Abrasive discs COMBIDISC corundum A Dimensions Grit size Recommended
More informationInstallation Guidelines: Casper Cloaking film is installed in a similar way to window films however it does have some differences:
Casper Cloaking Technology Film Installer Qualification procedures and install guidelines. June 6, 2017 Cloaking technology Film renders wall-mounted and other large LED displays in conference rooms, huddle
More informationor Ordering Installation and Self-Help Guide
1-800-467-0626 or 479-787-6264 Ordering Installation and Self-Help Guide MBS Self-Storage buildings offer a wide variety of layouts Typically based on 5ft spacing. Common roof slopes 1:12 to 1/2:12 and
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More informationStanley Hand tools Stanley FatMax push-lock adjustable joint pliers. 3 piece Stanley FatMax pushlock. Stanley FatMax groove joint pliers.
Stanley FatMax push-lock adjustable joint pliers Slip-resistant Bi-Material handle for a comfortable grip. Multipurpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick
More informationThank you for choosing G Plan Vintage
OWNER S GUIDE Thank you for choosing G Plan Vintage We hope that your G Plan Vintage furniture will draw admiring glances and give you many years of stylish comfort. G Plan Vintage is created in collaboration
More informationSkew Block Plane. U.S. Pat. No. 7,603,783 and U.S. Des. Pat. No. D644,904
Skew Block Plane U.S. Pat. No. 7,603,783 and U.S. Des. Pat. No. D644,904 The Veritas Skew Block Plane combines the best features of a low-angle block plane with those of a skew rabbet plane, making it
More informationGallium 03 Installation Instructions & Parts List
Gallium 03 Installation Instructions & Parts List Illustration Gallium 03, H1 Handle Left Hand: Open Out 04/05/2016 Revision 1.1 Page 1 of 19 IMPORTANT This shower screen / enclosure must be installed
More informationRadon 07 Installation Instructions & Parts List
Radon 07 Installation Instructions & Parts List Illustration Radon 07, H1 Handle Right Hand: Open Out 14/06/2016 Revision 1.1 Page 1 of 21 IMPORTANT This shower screen / enclosure must be installed by
More informationIndoor Western Red Cedar Cabin Sauna Assembly Instructions
Indoor Western Red Cedar Cabin Sauna Assembly Instructions Please read and understand the complete instructions prior to assembly and use of your Required: 2 People (recommended) Rubber Mallet 6 Step Ladder
More informationClay Modeling Film. Features of Clay Modeling Film. Use Clay Modeling Film
Clay Modeling Film The series of Clay Modeling Film, originally developed by TOOLS INTERNATIONAL Corp, is mainly used for interior/exterior shape confirmation, checking highlights and qualification studies
More informationDelivers Comfort. ph neutral. 100% cotton
ph neutral! 100% cotton Texon Delivers Comfort Texon International is the world s leading producer of structural footwear materials and has pioneered insoling materials technology for over 50 years. To
More informationCUTTERS CUTTERS
14 www.eclipsetools.com High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter Oil hardened & tempered Hot-formed
More informationBanc. zenithinteriors.com
Banc Banc The lounge system for many possible combinations. ARMCHAIR, OTTOMAN, BARSTOOL,, FEATURES Banc is a lively, open meeting point. A place for conversations held in confidence or simply a comfortable
More informationJohn Ottoman ASSEMBLY GUIDE
John Ottoman ASSEMBLY GUIDE V1 FOR YOUR SAFETY? Lift, don t drag. This protects your floor and product. Check the assembly guide for required components. Assembly requires 2 people. It's always easier
More informationAdorn Mortarless Stone Veneer Installation Natural Concrete Products
Adorn Mortarless Stone Veneer Installation Adorn Mortarless Stone Veneer can be used on new or existing construction. Adorn is nailed or screwed onto the wall; therefore no brick ledge is required. Adorn
More informationCleaning & Maintenance Advice Textured Glass.
Cleaning & Maintenance Advice Textured Glass. Viridian ScalaTexture Viridian ScalaMirage Viridian ScalaDesign Viridian LuminaMist Cleaning of Glass This information is offered as general information only.
More informationIntroduction 1. Nutec fascias and barge boards are ideal to cover up or replace weathered or rotten timber fascias and boards on old buildings.
Introduction 1 EVERITE s comprehensive range of Nutec fascias and barge boards have been designed to suit virtually any roof, whether slates, tiles or sheeting. They provide a functional finish by protecting
More informationWhat s in the Pro s Belt?
Glide-Tech Forged Blades Our Glide-Tech Forged Blades produce the cleanest, fastest, most comfortable cut possible with less hand force. These blades cut from pinch through points requiring fewer re-bites
More informationSoak a cloth with SC 850 and wipe over a sand-through.
Process description High-quality refinishing process suitable for long-lasting restorations of classic cars in professional body shops, using the R-M base- clear coat systems. Substrates - Steel - Galvanised
More informationWire and pipe drawing
Wire and pipe drawing Overview Wire drawing application deformations, drawing speeds and forces equipmentm dies and die materials Tube drawing tube drawing processes Strain and drawing force Drawing tools
More informationDubnium 11 Installation Instructions & Parts List
Dubnium 11 Installation Instructions & Parts List Illustration Dubnium, H1 Handle Right Hand: Open Out Page 1 of 25 IMPORTANT This shower screen / enclosure must be installed by suitably qualified individuals.
More informationThis unit covers the tools and equipment, that are used on a regular basis within a florist shop/ floral studio.
Maintain tools Maintain Floristry Tools and Equipment Introduction Introduction This unit covers the tools and equipment, that are used on a regular basis within a florist shop/ floral studio. We will
More informationBuilding an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades
Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades by Duane Strosaker Choosing the Wood Two 3/4" pieces of Sitka spruce laminated with epoxy for an unfeathered one-piece paddle. For
More informationFundamentals of Trimming
Volume 10: Issue 2 Fundamentals of Trimming Many of the most experienced and respected farriers in the industry will tell you that the trim is the most important step in shoeing a horse. If you don t get
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More informationGuidelines for working with
Guidelines for working with 1. Sawing Circular Saws When using circular saws, only the circular saw blades that are not set are suitable for cutting PARAPAN. Hardened metal saw blades that have the greatest
More informationRECOMMENED TOOLS FOR MACHINING COUNTERTOPS
Fabrication Manual RECOMMENED TOOLS FOR MACHINING COUNTERTOPS 1. Blades a) Segmented blade for porcelain. 4. Polishing Discs a) Silicon Carbide velcro discs for dry use. Grit 60, 120, 220, 400. 2. Grinding
More informationProfessional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
More informationSeptember 10, 2009 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
September 10, 2009 Page 1 PRODUCT FEATURES BASIC USES/RELATED USES Interior decorative tile. Architectural tile for decorative wall surfaces, backsplashes and other applications. Custom architectural and
More informationRouter Plane 05P38.01
Router Plane 05P38.01 U.S. Pat. No. 7,950,157 The Veritas Router Plane is an invaluable tool for work on stop or through dadoes, grooves, or any work that requires an area cut to a precise depth. This
More informationSpokeshaves. U.S. Des. Pat. D499,770
Spokeshaves U.S. Des. Pat. D499,770 Introduction The Veritas spokeshaves have been designed for smooth, effective shaping of chair spindles, tool handles, panel edges, paddle shafts, etc. The large spokeshave
More informationHOW IT WAS MADE. Hand Files
HOW IT WAS To put what text you want here just click and type, to add an image click insert > image then drag it here/resize it and delete this text MADE Hand Files A file is a piece of hardened steel
More informationCUTTERS CUTTERS
www.eclipsetools.com 14 co s. nt ne po om ec lin on m High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter
More informationFive Star Panel Installation Instructions
Five Star Panel Installation Instructions How to Store Five Star Panels You will need to store FIVE STAR PANELS in dry place to prevent staining, deterioration and possibly void all warranties. Stand the
More information18 GAUGE ELECTRIC METAL SHEAR
241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in
More informationThe most economical deburring machines in the world. Paul ERNST Maschinenfabrik GmbH
The most economical deburring machines in the world Paul ERNST Maschinenfabrik GmbH Paul ERNST Maschinenfabrik GmbH Company Ernst was established over 50 years ago. During first years ERNST was a successful
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationInlay String Thicknesser
Inlay String Thicknesser 05P32.10 The Veritas Inlay String Thicknesser is used to scrape veneer or inlay string to a desired thickness. Unlike a conventional scraper, the sole of this tool does not bear
More informationWindow Cleaning Network Group Scratched Glass Seminar July 27, 2002 Location: Oconomowoc, Wisconsin
Window Cleaning Network Group Scratched Glass Seminar July 27, 2002 Location: Oconomowoc, Wisconsin 1. Introduction : FIELDS CONSTRUCTION SERVICES Construction Window Cleaning. We do post construction
More informationAlmost Heaven Saunas THE AUTHENTIC SAUNA EXPERIENCE. Rainelle Sauna Installation & Owner s Manual
Almost Heaven Saunas THE AUTHENTIC SAUNA EXPERIENCE Rainelle Sauna Installation & Owner s Manual Almost Heaven Saunas THE AUTHENTIC SAUNA EXPERIENCE Read this entire manual through to the end before proceeding
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-7200 FEATURES TYPE 4C Œ A full cycle ratcheting hand tool ensures complete crimps Œ Ergonomic soft grip handles for comfortable crimping Œ A precision
More informationFOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE
FOCUS TECHNOLOGY FOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE Snaidero is one of the few companies on the market with more than 50 years experience in the development of lacquered kitchens. Its product
More informationUNPACK & ASSEMBLY. Done! CAUTION! THE MILL WILL BE VERY HEAVY - GET ASSISTANCE Pepe Tools.
PARTS DIAGRAM T Bar Height adjustment Wooden hand grip Height adjustment gears Frame Height adjustment screws Top roller End Gears cover Handle Brass Bushes (Each side) Bottom roller 4:1 Gearbox Mounting
More informationCommercial Products Fundamentals of Reel Mowers
Commercial Products Fundamentals of Reel Mowers PART NO. 98008SL, Rev. B This page is intentionally blank. Fundamentals of Reel Mowers 1 Table of Contents Historical Background... 2 Theory of Operation...
More informationHow to Sharpen a Knife
How to Sharpen a Knife Even a good knife will lose some of its sharpness with time. However, sharpening a knife is easy if you have the right tool and know how to use it. Generally three different materials
More informationCoffee table with recessed tray
Coffee table with recessed tray Dinner is served Coffee table with recessed tray This coffee table has it all: it contains a recessed tray, so that you can treat your guests to various delicacies. 1 Introduction
More information7mm/0Gauge BRF 025 ZUV SHARK Plough Brake. Building Instructions
Tel 07807 225801 www.prmrp.com 7mm/0Gauge BRF 025 ZUV SHARK Plough Brake Building Instructions SCALE MODEL PRODUCT FOR ADULT MODELLERS ONLY. WHITE METAL CONTAINS LEAD WASH HANDS AFTER USE. MAY CONTAIN
More informationLow-Angle and Standard Block Planes
Low-Angle and Standard Block Planes The Veritas Block Planes measure 6 1 /2" long by 2" wide. The body is ductile cast iron, a material much more durable as well as more stable than gray iron, having been
More informationPrel-Lam LC-LTI Liquid Crystal Laminated Glass
Prel-Lam LC-LTI Liquid Crystal Laminated Glass 1. FEATURES Liquid crystal glass is laminated glass that is connected to a switch-operated electric circuit. The appearance of this glass changes depending
More informationManufacture For Slewing Bearings LYC All Rights Reserved
Manufacture For Slewing Bearings Structure Type Four point contact ball slewing bearing Double-row angular contact ball slewing bearing Cross cylindrical roller slewing bearing Three-row roller slewing
More informationSauna Barrel 2.5 M. health, beauty, peace of mind
Sauna Barrel 2.5 M health, beauty, peace of mind Specifications Wood Shape 2.5M LENGTH Ø1.9M WITH TERRACE WITHOUT TERRACE Spruce or thermo wood Round The internal volume of sauna room, m 3 4.69 6.04 Thickness
More information