DIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum.
|
|
|
- Magdalene Shelton
- 6 years ago
- Views:
Transcription
1 8.01 DOORS AND FRAMES ( ) A. Doors DIVISION 8 DOORS AND WINDOWS 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 2. Where required for maintenance purposes, the width may be enlarged to 4'-0" wide; however the 7'-0" height shall not be modified. 3. Specify pre-finished, pre-machined, solid wood (staved) core doors, Structural Composite Lumber (SCL) doors or Laminated Strand Lumber (LSL) core doors with finish as required. 4. Particle board core doors are not acceptable. 5. If gypsum core doors are required for fire rating, wood edges shall be increased to provide solid backing for hardware such as hinges, locksets, and door closers or through-bolts shall be used for fastening. 6. All glazing in fire doors shall be a labeled fire rated glass installed in accordance with NFPA 80. Fire doors shall have 3 inch x 33 inch wire glass for a 1-1/2 hours "B" labeled doors. Wire glass shall be square in shape, not diamond. 7. Cross-corridor doors shall be Graintech 18 ga., fire-label where required used in conjunction with Von Duprin Impact exit device. B. Frames 1. Door frames should be standard metal frames where ever possible; however, to allow for architectural considerations frames can be modified with the prior approval of Department of Architecture, Engineering, and Construction. 2. Hollow metal frames shall have welded corners; 16 gage interior and 14 gage exterior. Include 3 silencers for single doors and 2 silencers for double doors. 3. Storefront assemblies are not desirable. If the highest quality store front assemblies are acceptable by O&M, then a 10 high (minimum) base DESIGN CRITERIA/FACILITY STANDARDS MANUAL 164
2 8.01 DOORS AND FRAMES ( ) DIVISION 8 DOORS AND WINDOWS and 5 wide stile and 6 top rail are required. 4. All wood and metal doors shall have minimum 5" stiles. DESIGN CRITERIA/FACILITY STANDARDS MANUAL 165
3 8.02 GLASS AND GLAZING A. Insulated glass shall be specified to reduce heat gain and heat loss. DESIGN CRITERIA/FACILITY STANDARDS MANUAL 166
4 8.03 HARDWARE SPECIFICATIONS ( ) This section applies to the Lock Function for the following rooms: Offices, Conference Rooms, and Libraries (office function lock, ML2067 or L9453). Mechanical Rooms, Custodial Rooms, Storage Rooms, and Computer Rooms (store room function lock, ML2057 or L9080). Classrooms and Laboratories (classroom function lock, ML2055 or L9070). Where electric strikes are to be used, they must be ML2057 or L9080. A. Mortise Locksets 1. Only the following manufacturers will be used for Mortise Locksets. a. Corbin/Russwin ML2000 Series (NSM Trim) b. Schlage L9000 Series x 06N Trim 2. Lockset Specifications B. Door Closers a. 2-3/4" backset b. 2 piece anti-friction latch bolt with a 3/4" throw c. 1" Throw Deadbolt d. Deadlock Latch e. Escutcheon Trim f. Lever Hand g. Face plate 1-1/4" x 8" h. Strike ASA 4-7/8" x 1-1/4" x 1-1/8" lip Only the following manufacturers will be used for door closers 1. LCN 4040 Series Reg. Arm-Fire Doors 2. LCN 4040 Series Cush -n- Stop Arm-Exterior Doors 3. LCN 1460 Series or 1461 for Handicapped areas- Bathroom, Classroom, and Public area doors. C. Handicapped Automatic Door Control Closers 1. Only the following manufacturers will be used for door closers. DESIGN CRITERIA/FACILITY STANDARDS MANUAL 167
5 8.03 HARDWARE SPECIFICATIONS ( ) a. Keane Monroe 2100 Series b. Keane Monroe #59H Press wall switch During secure hours, fire egress is maintained manually and automatically but ingress is restricted to authorized card holders only. c. Must interface with security system. 2. All door closers are to be thru-bolted in doors. D. Cylinders 1. Only the following manufacturers will be used for cylinders. a. Best Mortise Cylinder #1E74 (for Mortise Lockset and inside cylinder dogging on Von Duprin panic bars). b. Best Rim Cylinder #1E72 for panic bars. c. Schlage Mortise Cylinder (SFIC) # (Schlage mortise locksets) # (Von Duprin cylinder dogging/mullions) d. Schlage Rim Cylinder # (for use on panic devices. 2. All Best and Schlage cylinders and Locksets are to be 7 pin interchangeable cores. 3. All Best and Schlage cylinders to be supplied with brass construction cores. E. Hardware Manufacturers shall be as specified for the following pieces of hardware. No substitutes will be accepted. 1. Exit and Panic Devices: Von Duprin Series a. 99 b. CD99 c. SD-EL99 d. 99-F e F x LBR cross-corridor doors f. KR4954 keyed mullion g. KR9954 fire-rated keyed mullion DESIGN CRITERIA/FACILITY STANDARDS MANUAL 168
6 8.03 HARDWARE SPECIFICATIONS ( ) h. EPT-10 (required w/sd-el99 s) i. PS-873x2 power supply 2. Device Trims: Von Duprin Series a. 990EO b. 990NL c. 992L d. 992L-Rigid 3. No surface type vertical rod device. 4. All devices are to be thru-bolt in door. F. The following manufacturers are acceptable for ALL finish hardware; no substitutes shall be accepted. 1. Cylinders: Best or Schlage 2. Closers: LCN 3. Mortise Locksets Corbin/Russwin or Schlage 4. Exit Devices: Von Duprin 5. Cylindrical Locksets: Best or Schlage - 7 pin G. The A/E is responsible for specifying finish hardware in accordance with the above UMCP hardware standards and ADA requirements. H. All finish hardware shall be keyed to the existing UMCP keying system. J. Install 8" high (minimum) kick plates on both sides of exterior doors. DESIGN CRITERIA/FACILITY STANDARDS MANUAL 169
7 8.04 WINDOWS ( ) A. Aluminum clad wood windows have been designated as the UMCP window standard. Exterior surfaces shall have a 70% Kynar factory finish. Windows that are operable are preferred. Provide insect screens for operable windows and thermal-break frames for all windows. B. Windows and skylights shall be designed with maintenance and security in mind. C. Aluminum windows are acceptable as required by the specific design and with prior approval of FM. However, they must be capable of accepting insulated glass up to 1" in thickness with integral muntins and thermal-break frames when approved. D. Include provisions in accordance with OSHA requirements for cleaning windows. DESIGN CRITERIA/FACILITY STANDARDS MANUAL 170
55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
This section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
Victory Fire Door Inspections
Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire
Full line catalog. Locks, closers, and exits
Full line catalog Locks, closers, and exits Contents Cylindrical locks and deadbolts C1000 Series 4 C2000 Series 6 DB1000 Series 9 DB2000 Series 10 Surface door closers DCH1000 Series 12 DCM1000 Series
SECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
DIVISION Hardware
FORMAT 1. Technical specifications content and numbering system shall be based on the most current CSI Master Format. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project
INTELLIKEY. Lock Identification GENIUS AT YOUR FINGERTIPS. 1 rev:
INTELLIKEY R GENIUS AT YOUR FINGERTIPS Lock Identification 1 rev: 073103 rev: 073103 2 Easy Lock Identification Mortise Lockset Shown at left is a standard mortise function lockset. The cylinder is normally
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
Introduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5
88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...
88 Series. Exit device
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
88 Series. Exit device
88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products
INPACT 94 and 95. Exit device
INPACT 94 and 95 Exit device Introduction The unquestioned leader in innovation, design and durability. Von Duprin invented the exit device in 1908. Since that time, there have been many imitators, but
Finish Hardware. Contents. Section 10
Section 10 Finish Hardware Contents 10.0.0 Introduction to contents 10.1.0 Door hinges (types and illustrations) 10.2.0 Locksets and latchset configurations and functions 10.3.0 Heavy-duty mortise cases,
Metal Sound Retardant Door Hardware Information Bulletin
574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin
1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
Monarch XX Series. Crossbar Exit Device
Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
World s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
M O R T I S E L O C K S
MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building
SERIES 6000 ELECTRIC STRIKES
SERIES 6000 ELECTRIC STRIKES Electric Strikes provide remote release of a locked door. They allow the door to be opened without retracting the latchbolt. This occurs by the releasing of the electric strike
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
4200 Series. Commercial Exit Device
4200 Series Commercial Exit Device 4200 SERIES COMMERCIAL EXIT DEVICE SUGGESTED ARCHITECTURAL SPECIFICATIONS RIM All exit devices shall be American Eagle 4200 Series rim or surface vertical rod devices.
Division 08. Openings
Division 08. Openings 08 10 00. Doors and Frames 08 11 00. Metal Doors and Frames 1. All fire rated doors shall be metal. 2. Contractors shall remove all rating labels from doors/frames that are not installed
An ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009
Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks
INPACT 94 AND 95 Series Exit Device
INPACT 94 AND 95 Series Exit Device America s most preferred exit devices. Von Duprin exit devices are famous for their innovative design and meticulous engineering. There s simply no substitution. That
No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
BEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
FEATURES. TownSteel Architectural Hardware MFG
TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions
Product Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-334-5625 2 TABLE OF CONTENTS 22 Series... Pages 3-4 33A & 35A Series... Page 5 88 Series... Pages 6-7 98 Series... Page 8 99 Series... Pages 9-11 X98/99 Series...
PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified
PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified Features Access Control: No Wires: Locking Device Options: Number
350/500 HEAVY WALL TM IR ENTRANCES 1
JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview. Non handed design provides greater flexibility
6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series is designed to
Cross bar. Exit devices
Cross bar Exit devices Table of contents 4 XX-R Series 5 F-XX-R Series 6 XX-V Series 7 F-XX-V Series 8 XX-M Series 9 F-XX-M Series 10 XX-C Series 11 F-XX-C Series 12 1990 Series 13 2090 Series 14-16 Accessories
Solid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
FINISH HARDWARE. UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)
FINISH HARDWARE UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)831-2935 PART 1 GENERAL 1.01 GENERAL PROVISIONS A. The drawings and General Provisions of the contract, including the
6200 Series. System Components Series Electric Strikes
6200 Series Strikes for Mortise or Cylindrical Devices Models 6210, 6211, 6211AL, 6211WF, 6212, 6212WF, 6213, 6214, 6215, 6216, 6221, 6222, 6223, 6224, 6224AL, 6225 & 6226 System Components 6200 Series
Construction Standards PAGE
Construction Standards PAGE 087100-1 SECTION 087100 - PART 1 - GENERAL 1.1 M.S.U. ISSUES A. On interior doors, do not install lights that extend below the level of the top of the mounting of the exit device
33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
98/ Customer Service # Dogging Key (use to lock down pushbar)
911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2014 Printed in U.S.A. 911373-00 Rev. 05/14-f
98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Ives Pemko Hager 112HD FMSLFHD HD 224HD FMHD HD 210HD FSHD HD 157HD FSCPHD HD
PART 1 - PRODUCTS 1.1 FASTENERS A. All exposed fasteners shall be Phillips head or as otherwise specified, and shall match the finish of the adjacent hardware. All fasteners ex-posed to the weather shall
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
Section B. DEADBOLT ENTRANCE SETS general information. Deadbolt & Mortise Entry Sets. A deadbolt entry set includes:
A deadbolt entry set includes: DEADBOLT ENTRANCE SETS general information two backplates two levers or knobs cylinder(s) inside turnpiece spindle latch, 28 retraction adjustable backset deadbolt T-strike
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
Masonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
RENOVATION TO STUDENT SERVICES/HOUSING FROM HOSPITAL DAKOTA STATE UNIVERSITY MADISON, SOUTH DAKOTA
RENOVATION TO STUDENT SERVICES/HOUSING FROM HOSPITAL DAKOTA STATE UNIVERSITY MADISON, SOUTH DAKOTA KOCH HAZARD ARCHITECTS ADDENDUM DATE:. SCOPE OF THIS ADDENDUM: The following becomes a part of the original
L-Series Commercial Locks
L-Series Commercial Locks Contents 4 L-Series Commercial Locks 6 Schlage L9000 Series 7 Schlage L400 Series 8 M Collection Decorative Lever Designs and Finishes 10 Standard Lever Designs and Finishes 12
June, 2018 Page 1 of 12
Part 1 General 1.1 Summary.1 Unless otherwise indicated, follow the standards below when specifying hardware work. These standards are not intended to restrict or replace professional judgment..2 Unless
7.01. Door Hardware & Accessories
7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into
1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
FLUSHLINE ENTRANCES. Features
OCTOBER, 2006 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with a face sheet of fiberglass reinforced polyester (FRP) or aluminum, that is captured on four sides by integral extruded reglets
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY
350/500 IR Entrances. Features
OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.
350/500 IR Entrances. Features
SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER
376E Series Exit devices
376E Series Exit devices The Briton 376E Series is an economical range of push bar devices designed to suit single and double door applications. The 376E Series can be used on aluminium, hollow metal or
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
Exit Devices & Door Locks For Severe Windstorm & Hurricane Doors
SECURITY PROBLEM SOLVERS Exit Devices & Door Locks For Severe Windstorm & Hurricane Doors Designed To Surpass The Most Stringent Testing Criteria And Protect Life & Property Under Extreme Conditions Over
STANDARD KEYWAYS T SERIES PREMIUM KEYWAYS RESTRICTED KEYWAYS
I started Marshall Best Security Corporation in 2004 in order to continue a long family tradition of providing high quality locking products with unequaled customer service at competitive prices. The innovative
DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options
DB1000 SERIES Heavy-Duty Tubular Grade 1 Deadbolts Standard Features n Performance Complies with ANSI A156.5, Grade 1, 250,000 cycles n Chassis Tubular, steel n Deadbolt 1" x 2-1/4", square corner faceplate,
Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications
2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality
FINISH HARDWARE FOR NEW FACILITIES. A. Provide finish hardware including necessary accessories.
SECTION 08710 FINISH HARDWARE FOR NEW FACILITIES PART 1 GENERAL 1.01 SUMMARY A. Provide finish hardware including necessary accessories. B. Related Sections: 1. 06100 - Carpentry. 2. 08110 - Steel Doors
Garden State Hardware Wholesalers
The most common type of entry devices are cylindrical locksets and mortise locksets. Cylindrical Knob Cylindrical Lever Typical cylindrical lockset cylinder Cylindrical 2-1/8 Hole Cylindrical locksets
THE JAMES RUSHTON EARLY LEARNING AND FAMILY SUCCESS CENTER #2616 ADDENDUM ONE
SECTION 08 7100 DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Headline Push/Pull Latches
Push/Pull Latches Quality hardware for superior door control Glynn-Johnson has been providing the highest quality door control hardware for over 75 years. Glynn-Johnson uses only state-of-the-art technology
Affinity Site Survey. Address: City: State: Zip: Distributor: ACP #: Address: City: State: Zip: Date Submitted: Requested Installation Date:
For questions concerning pricing and quotes: Wesley Colquitt, Pricing Manager ASSA ABLOY Door Security Solutions wcolquitt@assaablydss-cs.com 0--0 00-- x 0 For questions concerning doors, frames and hardware
MEDIUM DUTY LOCKS - LEVERS. Distributed By. DH Pace National Key Service Center DHPace.
CYLINDRICAL LOCKS MEDIUM DUTY LOCKS - LEVERS Distributed By DH Pace National Key Service Center 855-237-3667 BestSolutions@dhpace.com DHPace.com/BestSolutions TABLE OF CONTENTS TABLE OF CONTENTS Page Features...2
2.01 Standard Entrances Description
2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
ABS-AMERICAN BUILDING SUPPLY, INC. Falcon
B Series - Dane Design Falcon With Schlage C Keyway With I.C. Less Core Door Thickness 1-3/8 to 2 standard. Backset 2-3/4 BS standard, available 2-3/8 BS. Specifications Trim has heavy duty springs for
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
A. Keyless, electronic access control using a PIN (Personal Identification Number)
Kaba Access Controls E-5000 & E3000 Series Locks CSI Specifications PART 1 GENERAL 1.1 SECTION INCLUDES A. Keyless, electronic access control using a PIN (Personal Identification Number) 1.2 RELATED SECTIONS
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
Monarch 18 Series. Touch Bar Exit Device
Monarch 18 Series Touch Bar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
STANDARD ENTRANCES TECHNICAL MANUAL
TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"
custom entrances and hardware
custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES
SYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID
SYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID Kitsap Regional Library is currently seeking quotes for replacement and installation of fire rated frames, doors and hardware at the Sylvan Way branch. There
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2