Finish Hardware. Contents. Section 10

Size: px
Start display at page:

Download "Finish Hardware. Contents. Section 10"

Transcription

1 Section 10 Finish Hardware Contents Introduction to contents Door hinges (types and illustrations) Locksets and latchset configurations and functions Heavy-duty mortise cases, hubs, and spring cartridges Strikes (illustrated) Door knob designs Lever handle designs Lever handle designs (forged and wrought) Turn levers Mortise cylinders How high-security cylinders differ from conventional ones Rosette and blocking rings for cylinders Miscellaneous cams for mortise cylinders Illustrated instructions for cylindrical lockset installation Deadbolts, spindles, security fasteners, and guard bolts Construction key systems illustrated Construction master keying illustrated Key-in-knob cylinder exploded view Removable core cylinders and core cams Panic devices (concealed/surfaceapplied vertical rod devices) Panic devices (mortise lock devices) Panic devices (rim devices conventional and enclosed push-bar type) Panic devices (rim devices and other types of pushes) Panic devices (outside trim) Double egress mortise/latchbolt devices Closers parallel arm application Closers standard application Closer spring powered exploded view Closers spring powered with delay valve exploded view Closers door opening, closing cycles Closers adjustments Exit devices push rail type Exit devices suggested mounting locations for alarm type devices Exit devices Emergency push to open Exit devices Remote latch retraction Exit devices DC powered, battery back-up Exit devices point-to-point wiring diagrams Exit devices basic components for a single-door system Concealed circuit hinges and armored door loops Door handing illustrated 593

2 594 Section Standard keying terms, codes, and designations Finish symbols and descriptions of these finishes Recommended number of hinges and frequency of operations ASTM specifications applicable to finish hardware requirements Finish Hardware Quality Control checklist

3 Finish Hardware Introduction to Contents Finish hardware selections and specifications span a wide range of functions, materials of construction and decorative requirements. The information contained in this section touches on hardware mainstays: locksets, latchsets with trim and cylinders, hinges (butts), panic devices, and informative specification tables. Although much of this information was furnished by two manufacturers, it remains very much generic in nature Door Hinges (Types and Illustrations) The butts are available in a wide range of metals. These butts have two equal square-edged leaves; one is mortised into the door and the other into the frame. It is available in standard, heavy, or extra heavy weight. These butts have two equal leaves; one is square-edged and the other is bevel-edged; the square edge is mortised into the frame, the bevel edge is surface mounted on the door. It is available in standard and heavy weight. These butts have two equal leaves; one is square edged and the other is bevel edged; the square edge is mortised into the door edge and the bevel edge is mounted on the frame. It is available in standard and heavy weight. Two bevel-edged leave butts are of unequal size; one is mounted on the frame, the other on the door.

4 596 Section Door Hinges (Types and Illustrations) Continued All of the above butts are generally available in sizes referring to their height: 4 1 2" (11.43 cm), 5" (12.7 cm), and 6" (15.24 cm). Swing clear/full mortise are also available in half-surface, half-mortise, and full-surface configurations. These types of butts provide an unobstructed clear frame opening when door is in the 90 open position. It is available in either a single- or double-acting configuration, usually mortised into the door and frame, providing closing action without a separate closer. Offset pivot hinges are mortised into the top and bottom edges of the door and into the frame jamb at the top and bottom. These hinges can also be mortised into the floor and the top of the frame. Center pivot hinges are attached to the top and bottom edges of the door and either into the top and bottom of the frame or into the floor and the top of the frame. Fully mortised into the edge of the door and frame, the hinge portion is not visible when the door is closed, except when the Paumelle or Olive Knuckle hinge is used, the olive-shaped portion is visible as an architectural feature.

5 Finish Hardware Lockset and Latchset Configurations and Functions (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

6 598 Section Lockset and Latchset Configurations and Functions Continued (By permission from Sargent division ASSA ABLOY, New Haven, Connecticut.)

7 Finish Hardware Heavy-Duty Mortise Cases, Hubs, and Spring Cartridges (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

8 600 Section Strikes (Illustrated) (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

9 Finish Hardware Door Knob Designs (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

10 602 Section Lever Handle Designs (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

11 Finish Hardware Lever Handle Designs (Forged and Wrought) (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

12 604 Section Turn Levers (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

13 Finish Hardware Mortise Cylinders (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

14 606 Section How High-Security Cylinders Differ from Conventional Ones (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

15 Finish Hardware Rosette and Blocking Rings for Cylinders (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

16 608 Section Miscellaneous Cams for Mortise Cylinders (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

17 Finish Hardware Illustrated Instructions for Cylindrical Lockset Installation (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

18 610 Section Deadbolts, Spindles, Security Fasteners and Guard Bolts (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

19 Finish Hardware Construction Key Systems Illustrated (By permission from Sargent Manufacturing Company, New Haven, Connecticut.)

20 612 Section Construction Master Keying Illustrated (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

21 Finish Hardware Key-in-Knob Cylinder Exploded View Key to parts: 1. Key blank 2. Plug and pin assembly 3. cylinder body and slide assembly 4. bottom pin 5. top pin 6. master pin 7. compression spring 8. retaining ring 9. cylinder tail piece 10. cylinder cap spring 11. cylinder cap pin 12. cylinder tail washer 13. cylinder cap 14. cylinder tail piece 15. blocking piece (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

22 614 Section Removable Core Cylinders and Core Cams (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

23 Finish Hardware Panic Devices (Concealed/Surface Applied Vertical Rod Devices) (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

24 616 Section Panic Devices (Concealed/Surface Applied Vertical Rod Devices) Continued (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

25 Finish Hardware Panic Devices (Mortise Lock Devices) (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

26 618 Section Panic Devices (Mortise Lock Devices) Continued (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

27 Finish Hardware Panic Devices (Rim Devices Conventional and Enclosed Push-Bar Type) (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

28 620 Section Panic Devices (Rim Devices Conventional and Enclosed Push-Bar Type) Continued (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

29 Panic Devices (Rim Devices and Other Types of Pushes) 621 (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

30 622 Section Panic Devices (Rim Devices and Other Types of Pushes) Continued (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

31 Finish Hardware Panic Devices (Outside Trim) (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

32 624 Section Panic Devices (Outside Trim) Continued (By permission from Von Duprin Exit Devices Ingersoll-Rand, Inc., Indianapolis, Indiana.)

33 Finish Hardware Double Egress Mortise/Latchbolt Devices (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

34 626 Section Closers Parallel Arm Application (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

35 Finish Hardware Closers Standard Application (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

36 628 Section Closers Spring Powered Exploded View (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

37 Finish Hardware Closers Spring Powered, with Delay Valve Exploded View (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

38 630 Section Closers Door Opening, Closing Cycles (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

39 Finish Hardware Closers Adjustments (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

40 632 Section Exit Devices Push Rail Type (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

41 Finish Hardware Exit Devices Suggested Mounting Locations for Alarm Type Devices (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

42 634 Section Exit Devices Emergency Push to Open (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

43 Finish Hardware Exit Devices Remote Latch Retraction (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

44 636 Section Exit Devices DC Powered, Battery Back-up (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

45 Finish Hardware Exit Devices Point-to-Point Wiring Diagrams (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

46 638 Section Exit Devices Basic Components for a Single-Door System (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

47 Finish Hardware Concealed Circuit Hinges and Armored Door Loops (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

48 640 Section Door Handing Illustrated (By permission from Sargent Manufacturing Co., 100 Sargent Drive, New Haven, Connecticut.)

49 Standard Keying Terms, Codes, and Designations Finish Hardware 641

50 642 Section Finish Symbols and Descriptions of These Finishes

51 Recommended Number of Hinges and Frequency of Operations Finish Hardware 643

52 644 Section ASTM Specifications Applicable to Finish Hardware Requirements

53 Finish Hardware Quality Control Checklist Finish Hardware 645

54 646 Section 10 Continued

55 Series Exit Device

55 Series Exit Device 55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty

More information

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY. SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device

More information

Metal Sound Retardant Door Hardware Information Bulletin

Metal Sound Retardant Door Hardware Information Bulletin 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin

More information

SECTION FINISH HARDWARE

SECTION FINISH HARDWARE SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings

More information

Table of Contents Holders & Stops

Table of Contents Holders & Stops Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590

More information

INTELLIKEY. Lock Identification GENIUS AT YOUR FINGERTIPS. 1 rev:

INTELLIKEY. Lock Identification GENIUS AT YOUR FINGERTIPS. 1 rev: INTELLIKEY R GENIUS AT YOUR FINGERTIPS Lock Identification 1 rev: 073103 rev: 073103 2 Easy Lock Identification Mortise Lockset Shown at left is a standard mortise function lockset. The cylinder is normally

More information

Victory Fire Door Inspections

Victory Fire Door Inspections Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire

More information

WD WD7000 Series

WD WD7000 Series WD-7000 12-WD7000 Series Wood Door Concealed Vertical Rod Multi-Point Lock Installation Instructions Copyright 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction

More information

DIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum.

DIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 8.01 DOORS AND FRAMES (12-2-02) A. Doors DIVISION 8 DOORS AND WINDOWS 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 2. Where required for maintenance

More information

Introduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5

Introduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...

More information

4200 Series. Commercial Exit Device

4200 Series. Commercial Exit Device 4200 Series Commercial Exit Device 4200 SERIES COMMERCIAL EXIT DEVICE SUGGESTED ARCHITECTURAL SPECIFICATIONS RIM All exit devices shall be American Eagle 4200 Series rim or surface vertical rod devices.

More information

This section describes the design requirements and materials/products for door hardware.

This section describes the design requirements and materials/products for door hardware. Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran

More information

M O R T I S E L O C K S

M O R T I S E L O C K S MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building

More information

Where plans come together.

Where plans come together. Where plans come together. MORTISE LOCK Performance You Can Plan On. Taking a facility from architectural blueprint to completed project can be a complicated process. Decisions have to be made, deadlines

More information

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2 911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F

More information

INSTALLATION INSTRUCTIONS CRL JACKSON

INSTALLATION INSTRUCTIONS CRL JACKSON INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY

More information

World s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form

World s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:

More information

8000 SERIES SERIES HEAVY-DUTY MODELS

8000 SERIES SERIES HEAVY-DUTY MODELS GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary

More information

Table of Contents Holders & Stops

Table of Contents Holders & Stops Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,

More information

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B) SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets

More information

Architectural Solutions

Architectural Solutions Architectural Solutions Kaba - since 1862 Kaba since 1862 The Kaba Group runs operations in more than 60 countries and employs a workforce of around 10,000. As the technological forerunner Kaba develops

More information

CATALOG FOLGER ADAM ELECTRIC STRIKES. Building on a tradition. of industrial grade strength. with extra-heavy duty. electric strikes for high

CATALOG FOLGER ADAM ELECTRIC STRIKES. Building on a tradition. of industrial grade strength. with extra-heavy duty. electric strikes for high 2010 CATALOG FOLGER ADAM ELECTRIC STRIKES Building on a tradition of industrial grade strength with extra-heavy duty electric strikes for high security requirements ASSA ABLOY, the global leader in door

More information

Steel Hawk 4300 Electrified Deadlatch (elatch)

Steel Hawk 4300 Electrified Deadlatch (elatch) STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or

More information

FEATURES. TownSteel Architectural Hardware MFG

FEATURES. TownSteel Architectural Hardware MFG TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions

More information

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE. FOR ASSISTANCE,

More information

350/500 Heavy Wall TM IR Entrances

350/500 Heavy Wall TM IR Entrances SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile

More information

BEFORE STARTING INSTALLATION

BEFORE STARTING INSTALLATION VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,

More information

No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.

No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes. SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.

More information

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to

More information

7.01. Door Hardware & Accessories

7.01. Door Hardware & Accessories 7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into

More information

Basic Technical Fundamentals of Builders Hardware Exit Devices

Basic Technical Fundamentals of Builders Hardware Exit Devices Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History................................................... 1 What is

More information

7130(F) Series Mortise Exit Devices Installation Instructions

7130(F) Series Mortise Exit Devices Installation Instructions 7130(F) Series Mortise Exit Devices Installation Instructions Outside Trim Device is packed ready for any Yale 650F or 660F Series Trim. End Clamp (3) 8-32 x 5/16" PUFHMS End Cap (2) 1/4-20 x 1" PPHMS

More information

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary

More information

DIVISION Hardware

DIVISION Hardware FORMAT 1. Technical specifications content and numbering system shall be based on the most current CSI Master Format. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project

More information

Installation Instructions for 45H & 47H Mortise Locks

Installation Instructions for 45H & 47H Mortise Locks Installation Instructions for 45H & 47H Mortise Locks Contents These installation instructions describe how to install your 45H & 47H Mortise Lock. Topics covered include: Finishing the preparation...

More information

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications 3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality

More information

ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING

ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready

More information

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction. Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.

More information

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt

More information

INPACT 94 AND 95 Series Exit Device

INPACT 94 AND 95 Series Exit Device INPACT 94 AND 95 Series Exit Device America s most preferred exit devices. Von Duprin exit devices are famous for their innovative design and meticulous engineering. There s simply no substitution. That

More information

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device *911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical

More information

Exit Devices 10 SERIES 1200 SERIES 20 SERIES

Exit Devices 10 SERIES 1200 SERIES 20 SERIES Exit Devices 10 SERIES 31-1085-4-7 Concealed Vertical Rod Device 340.82 340.82 31-1085P-L-7 CVR Paddle - Engraved "Push" - LHR 31-1085P-R-7 CVR Paddle - Engraved "Push" - RHR 328.55 328.55 31-1095-L-C-4

More information

Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING

Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0

More information

Installation Instructions

Installation Instructions VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)

More information

Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009

Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009 Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks

More information

PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified

PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified Features Access Control: No Wires: Locking Device Options: Number

More information

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard

More information

CM5100 COMPUTER MANAGED CYLINDRICAL LOCK HARD-WIRED (FSE/FSA) INSTALLATION MANUAL

CM5100 COMPUTER MANAGED CYLINDRICAL LOCK HARD-WIRED (FSE/FSA) INSTALLATION MANUAL The 5100 series lock is a stand-alone, microprocessor controlled, electromechanical locking system. The 5100 employs a heavy-duty mechanical design which is easy to install and highly reliable. The FSE

More information

Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4

Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4 Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628

More information

88 Series. Exit device

88 Series. Exit device 88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of

More information

Installation Instructions for 45HW & 47HW Electrified Mortise Locks

Installation Instructions for 45HW & 47HW Electrified Mortise Locks Installation Instructions for 45HW & 47HW Electrified Mortise Locks Contents These installation instructions describe how to install your 45HW & 47HW Electrified Mortise Lock. Topics covered include: Finishing

More information

1530(F) Mortise Exit Devices Installation Instructions

1530(F) Mortise Exit Devices Installation Instructions 1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal

More information

350/500 HEAVY WALL TM IR ENTRANCES 1

350/500 HEAVY WALL TM IR ENTRANCES 1 JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top

More information

55 Series. Exit device

55 Series. Exit device 55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of

More information

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts 1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder

More information

1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6

1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com

More information

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options DB1000 SERIES Heavy-Duty Tubular Grade 1 Deadbolts Standard Features n Performance Complies with ANSI A156.5, Grade 1, 250,000 cycles n Chassis Tubular, steel n Deadbolt 1" x 2-1/4", square corner faceplate,

More information

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates

More information

INSTALLATION INSTRUCTIONS CRL JACKSON

INSTALLATION INSTRUCTIONS CRL JACKSON INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY

More information

Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612

Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612 Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2

More information

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED

More information

APPENDIX 1H: DOOR HARDWARE 1

APPENDIX 1H: DOOR HARDWARE 1 APPENDIX 1H: DOOR HARDWARE 1 Typical Hardware The typical door descriptions set out in this Appendix provide function and quality expectations and are not intended to describe all scenarios or be a complete

More information

DOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW

DOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8 hole, 9 height. 3-PB-CW /4 9 2 3 /4 1 3 /8 S-CW Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness

More information

6200 Series. System Components Series Electric Strikes

6200 Series. System Components Series Electric Strikes 6200 Series Strikes for Mortise or Cylindrical Devices Models 6210, 6211, 6211AL, 6211WF, 6212, 6212WF, 6213, 6214, 6215, 6216, 6221, 6222, 6223, 6224, 6224AL, 6225 & 6226 System Components 6200 Series

More information

3000 Series Exit Devices Premier Product

3000 Series Exit Devices Premier Product 00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.

More information

Full line catalog. Locks, closers, and exits

Full line catalog. Locks, closers, and exits Full line catalog Locks, closers, and exits Contents Cylindrical locks and deadbolts C1000 Series 4 C2000 Series 6 DB1000 Series 9 DB2000 Series 10 Surface door closers DCH1000 Series 12 DCM1000 Series

More information

Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications

Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications 2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality

More information

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws

More information

EXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM

EXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple

More information

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device 911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device

More information

88 Series. Exit device

88 Series. Exit device 88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom

More information

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are

More information

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow

More information

Construction Standards PAGE

Construction Standards PAGE Construction Standards PAGE 087100-1 SECTION 087100 - PART 1 - GENERAL 1.1 M.S.U. ISSUES A. On interior doors, do not install lights that extend below the level of the top of the mounting of the exit device

More information

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5

More information

Installation Instructions 50 (06-09) 1-15/32 15/32 21/32. 1/4-20 x 5/8" FHMS or #14 x 1/2" FHWS 1/16 1/4. Floor Plate

Installation Instructions 50 (06-09) 1-15/32 15/32 21/32. 1/4-20 x 5/8 FHMS or #14 x 1/2 FHWS 1/16 1/4. Floor Plate RIXSON ASSA ABLOY 3/4 Template Jamb 1/8 2- R. Max. 1-7/16 1-1/32 2-2-3/4 7/8 Dia. C L 1-1/4 Dia. Installation Instructions 50 (06-09) Finish Plate 340 TOP PIVOT Pivot Shown Engaged 9/16 1/16 1/4 1-15/32

More information

ACME 50 Application Guide

ACME 50 Application Guide ACME 50 Application Guide p1 CONTENTS Features & Benefits... 2 Product Images... 3-8 TRIM AND CONNECTORS Trim & Connector Diagram.... 9 Partition Profile Section... 10 Adjustability.... 11 Ceiling & Floor

More information

HES Series Electric Strikes & Optional faceplates 1006 Grade 1 electric StrikeS series optional faceplates AD: E Option

HES Series Electric Strikes & Optional faceplates 1006 Grade 1 electric StrikeS series optional faceplates AD: E Option 1006 Series Electric Strikes & Optional faceplates 1006 Grade 1 electric StrikeS with K Option The strongest and most versatile electric strike that meets or exceeds every standard developed for electric

More information

376E Series Exit devices

376E Series Exit devices 376E Series Exit devices The Briton 376E Series is an economical range of push bar devices designed to suit single and double door applications. The 376E Series can be used on aluminium, hollow metal or

More information

FINISH HARDWARE. UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)

FINISH HARDWARE. UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302) FINISH HARDWARE UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)831-2935 PART 1 GENERAL 1.01 GENERAL PROVISIONS A. The drawings and General Provisions of the contract, including the

More information

s tops & holder s Absolute Door Control and Entire Opening Protection

s tops & holder s Absolute Door Control and Entire Opening Protection check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or

More information

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)

More information

WOOD DOOR INSTALLATION

WOOD DOOR INSTALLATION 1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-32VD9W TEMPLATE FOR VON DUPRIN 99 RIM WOOD DOOR INSTALLATION WHEN USING

More information

CONCEALED VERTICAL ROD PANIC EXIT DEVICE

CONCEALED VERTICAL ROD PANIC EXIT DEVICE INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF

More information

ED3000 Series. Exit Device Parts Manual

ED3000 Series. Exit Device Parts Manual ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7

More information

Entry Mortise Lock Set Lever to Lever

Entry Mortise Lock Set Lever to Lever Entry Mortise Lock Set Lever to Lever 1 Lever 2 Escutcheon 3 Turn Piece 4 Mortise Lock 5 Scalp 6 Mortise Lock Strike 7 Mortise Lock Dust Box 8 Mortise Cylinder 9 Cylinder Swing Cover 10 Spindle 11 Spindle

More information

Entry Mortise Handleset

Entry Mortise Handleset 1. Pencil 2. No. 2 and No. 3 Phillips Head Screwdrivers 3. No. 1 and No. 2 Slotted Screw Drivers 4. 1/8" Allen Head Wrench 5. 3/4" Wood Chisel or Corner Chisel 6. Measuring Device 7. Lock Mortising Tool

More information

Mortise Locks 185 Series

Mortise Locks 185 Series Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 11/8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628

More information

SLIDING DOOR LOCKS MISCELLANEOUS

SLIDING DOOR LOCKS MISCELLANEOUS MISCELLANEOUS SLIDING DOOR We offer the BEST delivered prices on this NEW pocket door hardware of any dealer, big discounts off the MSRP prices listed here. Give us a call toll free at (888) 3062298 or

More information

ED5200(A) Series Rim Exit Devices

ED5200(A) Series Rim Exit Devices ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat

More information

custom entrances and hardware

custom entrances and hardware custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES

More information

Important: Read this first!

Important: Read this first! 911010-00 Fire Pin/Strike Kit LBR Installation Instructions LBR (Less Bottom Rod)! WARNING For surface vertical rod installations, incorrect strike installations can result in latching failure in a fire

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 71 00 1. Use this section only for NCA projects. 2. Delete between // --- // if not applicable to project. Also delete any other item or paragraph not applicable

More information

Affinity Site Survey. Address: City: State: Zip: Distributor: ACP #: Address: City: State: Zip: Date Submitted: Requested Installation Date:

Affinity Site Survey. Address: City: State: Zip: Distributor: ACP #: Address: City: State: Zip: Date Submitted: Requested Installation Date: For questions concerning pricing and quotes: Wesley Colquitt, Pricing Manager ASSA ABLOY Door Security Solutions wcolquitt@assaablydss-cs.com 0--0 00-- x 0 For questions concerning doors, frames and hardware

More information

Passage Mortise Lock Set Lever to Lever

Passage Mortise Lock Set Lever to Lever Passage Mortise Lock Set Lever to Lever 1 Lever 2 Escutcheon 3 Mortise Lock 4 Scalp 5 Mortise Lock Strike 6 Mortise Lock Dust Box 7 Spindle 8 Spindle Spring 9 Spindle Retainer 2 1 9 8 7 9 7 8 3 1 2 4 5

More information

CM5500 COMPUTER MANAGED MORTISE LOCK INSTALLATION MANUAL

CM5500 COMPUTER MANAGED MORTISE LOCK INSTALLATION MANUAL The 5500 series lock is a stand-alone, microprocessor controlled, electromechanical locking system. The 5500 employs a heavy-duty mechanical design with fewer moving parts that a standard mechanical mortise

More information

MANUFACTURER & WHOLESALER OF WINLY PRODUCTS

MANUFACTURER & WHOLESALER OF WINLY PRODUCTS MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and

More information