Building Noah s Ark. Materials Needed: Color printer Heavy paper (letter-sized) Stick Glue/ Super glue Scissors Penknife Metal Ruler
|
|
- Marybeth Young
- 6 years ago
- Views:
Transcription
1 Building Noah s Ark With the help of a group of students, you will be able to build a model of Noah s Ark. This project can be downloaded for free from The design and artwork is by Linda Yew Materials Needed: Color printer Heavy paper (letter-sized) Stick lue/ Super glue Scissors Penknife Metal Ruler
2 Directions: This model of Noah s Ark is made according to scale 135:1. According to enesis 6, od told Noah: 14 Make yourself an ark of gopher wood. Make rooms in the ark, and cover it inside and out with pitch. 15 This is how you are to make it: the length of the ark 300 cubits, its breadth 50 cubits, and its height 30 cubits. 16 Make a roof for the ark, and finish it to a cubit above, and set the door of the ark in its side. Make it with lower, second, and third decks. 1) Print out the cut-outs on letter-sized paper (11 x8.5 ). Heavier paper will hold and support weight better. Select only one of the following options to print. Pages 1 through 13 are the instructions you are reading now. Pages 14 through 42 are the project pages in color. Pages 43 through 71 are the printable project pages in black and white which are suitable for students to color or if you don t wish to use up all your ink cartridges! Pages 72 through 100 are the black and white pages without the pattern of the boards. 2) Take note of the following symbols as they provide you with the necessary directions on each sheet. Symbol Name Meaning Black/rey bold line Cut with scissors/ or penknife Or Black/rey dashed line Fold Dotted line For alignment purpose lue lue or Clear Tape
3 3) Let s start with Section 1 Using the symbols as a guide, cut along the bold lines and fold along the dashed lines. To ensure that your lines remain crisp when you fold them, gently score your penknife along the dashed line before you make the fold. You should get something like this for Section 1 Front View:
4 And this for Section 1 Back View Section 1 Interior. This part is a little tricky. Using a penknife, cut along the bold lines that divide the 3 levels.
5 Cut out Section 1 (level 2) and Section 1 (level 3) Slide in Section 1 (level 2) and Section 1 (level 3) and glue down their flaps behind.
6 Do NOT apply glue on the small square sections yet. lue this interior into Section 1. You should get the following after having completed Section 1.
7 4) Section 2 Using the symbols as a guide, you should get something like this for Section 2 Front View. Repeat the steps for Section 2 Back View. lue on the interior of Section 2. You should get something like this:
8 5) Section 3 Repeat the steps for Section 3 Front View. You should get this: Repeat the steps for Section 3 back view. Cut out a wall for Section 3. lue the respective sides and slide it into the middle of Section 3 as shown.
9 Next, cut out Section 3 (left partition), apply glue and slide it into the left-hand section. Align with the grey dotted line as shown. 6) Section 4 Repeat all steps and cut out another wall to use as a support. You should get this:
10 7) Section 4-6 Repeat all the steps till you reach the final section. 8) Connect all sections together Align the slits and slot them in. This step takes some patience as it can be a little challenging.
11 To make it easier, do not apply the glue until you have slotted the two sections securely together. After this, you may lift up the flaps and dab on some glue. Remember to glue the small square sections from Section 1 (level 2) and Section 1 (level 3) onto the inner walls. You should get something like this:
12 And eventually, this: 9) lue on left and right end Cut out the left and right caps and glue them on as shown:
13 10) Roof Fold along the dashed lines as shown: Apply glue to the specified areas. lue one roof to another before attaching the entire length onto the rest of the ark. Finally, you should get your completed ark! CONRATULATIONS!
14 Section 1 front view
15 Section 1 back view
16 Section 1 interior
17 Section 2 front view
18 Section 2 back view
19 Section 2 interior
20 Section 3 front view
21 Section 3 back view
22 Section 4 front view
23 Section 4 back view
24 Section 5 front view
25 Section 5 back view
26 Section 6 front view
27 Section 6 back view
28 (the other side) Section 1 (Level 2)
29 Section 1 (Level 3)
30 Section 1 (left cap) Section 6 (right cap)
31 Section 3 (left partition)
32 (glue other side) (glue this side) Section 3 (wall)
33 (glue other side) (glue this side) Section 4 (wall)
34 (glue other side) (glue this side) Section 5 (wall)
35 (glue other side) (glue this side) Section 6 (wall)
36 Section 2 (door interior)
37
38
39
40
41
42
43 Section 1 front view
44 Section 1 back view
45 Section 1 interior
46 Section 2 front view
47 Section 2 back view
48 Section 2 interior
49 Section 3 front view
50 Section 3 back view
51 Section 4 front view
52 Section 4 back view
53 Section 5 front view
54 Section 5 back view
55 Section 6 front view
56 Section 6 back view
57 (the other side) Section 1 (Level 3)
58 Section 1 (Level 3)
59 Section 1 (left cap) Section 6 (right cap)
60 Section 3 (left partition)
61 (glue other side) (glue this side) Section 3 (wall)
62 (glue other side) (glue this side) Section 4 (wall)
63 (glue other side) (glue this side) Section 5 (wall)
64 (glue other side) (glue this side) Section 6 (wall)
65 Section 2 (door interior)
66
67
68
69
70
71
72 Section 1 front view
73 Section 1 back view
74 Section 1 interior
75 Section 2 front view
76 Section 2 back view
77 Section 2 interior
78 Section 3 front view
79 Section 3 back view
80 Section 4 front view
81 Section 4 back view
82 Section 5 front view
83 Section 5 back view
84 Section 6 front view
85 Section 6 back view
86 (the other side) Section 1 (Level 3)
87 Section 1 (Level 3)
88 Section 1 (left cap) Section 6 (right cap)
89 Section 3 (left partition)
90 (glue other side) (glue this side) Section 3 (wall)
91 (glue other side) (glue this side) Section 4 (wall)
92 (glue other side) (glue this side) Section 5 (wall)
93 (glue other side) (glue this side) Section 6 (wall)
94 Section 2 (door interior)
95
96
97
98
99
100
Make Your Own White House Pop-Up. Glue Here. Glue Here. Glue Here. Glue Here. Card Base
Make Your Own White House Pop-Up F G H I Card Base Make Your Own White House Pop-Up Piece #1 (front of building) E Piece #2 (roof) D C B fold around to back and glue A CUT AT TOP OF COLUMN TO CUT OUT THIS
More informationc Fold the two outer flaps inside and then fold in half so it so it looks like this. While it is folded cut along the red lines to create a notch.
Building the Paper Dice Tower Tools Needed: A pen, pencil, or bone folder for scoring the paper (this will make folding easier). Paper (heavy card stock preferred). Scissors, a razor knife, and straight
More informationTheSorceres. (FantasyVersion)
TheSorceres (FantasyVersion) The Sorceress! (Fantasy Version) Papercraft design by Kostas Ntanos Based on the Sorceress from The Cardboard Kingdom What you will need o An adult to help you with cutting
More informationLEGAL COPY & LICENSE AGREEMENT
LEGAL COPY & LICENSE AGREEMENT You may open this PDF file in Adobe Acrobat for unlimited printing for your own personal, non-commercial use. (1) Sharing of this file is prohibited. (2) Selling of this
More informationPrintable Tutorial: Exploding Box Mini Album
Printable Tutorial: Exploding Box Mini Album scrapgirls.com/all-posts/printable-tutorial-exploding-box-mini-album/ Digital scrapbooking supplies used: Spring is Here Collection Biggie ScrapSimple Craft
More informationAngles. Materials for the Paper Protractor. Materials for the Angel Comparison Strip. Zachary J. Brewer, MathActivities.net
Angles Materials for the Paper Protractor 30 degree sheets, page 119 (1 per student) Circle sheets, page 120 (2 photocopies per student) Crayons (1 color per student) Scissors (1 per student) Stapler (for
More informationArticulated Ladder Truck
Special Vehicle Series : 05 Articulated Ladder Truck View of completed model * This model was designed for Papercraft and may differ from the original in some respects. Tools tip Scissors Ruler, set square
More informationDARC MANSION ASSEMBLY INSTRUCTIONS page 1.
DARC MANSION ASSEMBLY INSTRUCTIONS page 1. DARC MANSION ASSEMBLY INSTRUCTIONS page 2. NOTE: This project should be printed on heavy card stock. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick),
More informationThe Bleak Estate Assembly Instructions - Page 1.
The Bleak Estate Assembly Instructions - Page 1. The Bleak Estate Assembly Instructions - Page 2. The Bleak Estate Assembly Instructions - Page 3. WHAT YOU'LL NEED: Scissors, glue (or a glue stick), a
More informationThe Hearse Carriage Assembly Instructions Page 1.
The Hearse Carriage Assembly Instructions Page 1. The Hearse Carriage Assembly Instructions Page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a needle, two toothpicks, a sharpened pencil,
More informationVivian Mansion Assembly Instruction By Laser Dollhouse Designs
Vivian Mansion Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also
More informationTerrie Sandelin Miniatures in Minutes
Terrie Sandelin Miniatures in Minutes Square-in-a-Square Foundation: X-Crossing Miniature Quilt Finished Size: Foundation pieced center 12" square, quilt 17" square I like to experiment with the foundations
More informationTEMPLATE (FORM) PROCEDURE:
Paper Sculpture MATERIALS NEEDED: Sketchbook Paper/Pencil/Eraser Scissors/ Ruler Template Patterns Glue stick/ Hot Glue Gun Colored Markers REQUIREMENTS: 1. Minimum 5 shapes (Use uneven number) 2. Must
More informationChristmas Magic Merry Christmas Lantern
Designed by ~ Annette Green Graphic 45 Supplies: 1 each Deep Rectangular Matchbook Box (4501520) 1 each Christmas Magic Collection Pack (4501735) 1 pack Christmas Magic Chipboard (4501737) 1 pack Metal
More informationGOAL! GOAL! birthday. birthday. happy. happy. happy. birthday. happy. birthday
GOAL! GOAL! CUPCAKE WRAPPERS:: Print on regular white printer paper and wrap and adhere together with double sided tape or glue dots. Place cupcakes in the wrapper. DRINK LABELS:: Print on regular white
More informationThe Castle House Assembly Instructions By Laser Dollhouse Designs
The Castle House Assembly Instructions By Laser Dollhouse Designs HOUSE PARTS First floor slots labeled 1A-1G First floor Walls labeled 1A-1G First floor interior door frames (4) Wall 1A frames (6) Main
More informationHubble Space Telescope Paper Model Directions Downloads, patterns, and other information at:
Hubble Space Telescope Paper Model Directions Downloads, patterns, and other information at: www.hubblesite.org/go/model Materials: model pattern printed onto cardstock/coverstock instructions printed
More informationRead This Before Printing Anything!
Read This Before Printing Anything! coca-cola polar bears papercraft 2 guidelines Printing When printing with Adobe Reader, it is important to use proper print settings 1 for correct alignment and scaling.
More informationBasic Scrapbook Cover
A KoalaKat Designs TUTORIAL SKILL LEVEL: BEGINNER Basic Scrapbook Cover 2014 by Geneva Campitelli / Koalakat Designs All Rights Reserved www.koalakat.com This tutorial is about creating a basic chipboard
More informationWaist Cincher Pattern. Sewing Instructions. Corset pattern by Linda Sparks of Farthingales
Waist Cincher Pattern Sewing Instructions Corset pattern by Linda Sparks of Farthingales CB CF The corset on the left was made using this pattern. There are four pieces for each side of the body Both top
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More informationOpen Pit Garage/ PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better!
Step By Step Instructions For Open Pit Garage/ PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better! for Kit # BK XXXX Finished Open Pit Garage shown below Read the Step By Step Instructions
More informationPocket Album. Supplies Needed: CS Bookbinding Glue CS Grid Ruler Bone Folder Foam Brush Pencil Scissors
Pocket Album Kit Ingredients: (2) 5.25x7.25 Book Board (2) 6.5x8.5 Cover Papers (2) 4-7/8x7-1/8 Inside Covers 7x11.5 Spine (7) Die Cut and Scored Inside Pages (7) 5.5x7 Translucent Inside Pages 1 Yard
More informationSpeedy s Garage / PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better!
Step By Step Instructions For Speedy s Garage / PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better! for Kit # BK XXXX Speedy s Garage shown below Read Carefully Model of Speedy s
More informationSee pages 5-6 for template and instructions. Gear up with this never land pirate hat and let the swashbuckling begin!
Treasure crafts Ahoy ye pirates! Here be some super fun pirate crafts for you and your crew! Make all these piratey crafts by printing the pages of this Treasure Crafts kit. You will need: Scissors» Tape»
More informationCraftman One Car Garage Assembly Instruction by Laser Dollhouse Designs
Craftman One Car Garage Assembly Instruction by Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit.
More informationPaper Toys Town Accessories
BIBLE Paper Toys Town Accessories TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-ting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth edges. (Tweezers
More informationWing. Gently bend the top of the wing over. With the paper removed, it should produce a nice curve.
Fuselage Remove the paper in the four areas shown. Basically, from the trailing edge of the canard forward in the three nose segments and on the rear bottom of the fuse. Normal B fold for the sides but
More informationWoodforde Castle Assembly Instructions and Paper parts
Woodforde Castle Assembly Instructions and Paper parts This is a complete assembly packet. It includes all the parts to make the castle and the instructions on how to do it. Castle design Copyright 2017
More informationDiscotech Clutch. Finished Size: 12 long x 8 tall. All cutting measurements given throughout the pattern are length x height.
Discotech Clutch This confident beginner-friendly clutch features stylish metal screw-in handles, lining pockets, and an inner snap closure. Perfect for a night out on the town, you will be able to sew
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this special New Year s paper craft model. By following these instructions while referring to the names and numbers shown on the parts sheet, you can complete
More informationFryer's Trebuchet Paper Kits
Fryer's Trebuchet Paper Kits Things you will need 7 sheets of card approx. 0.3 mm or 0.01 inches thick 1 sheet of paper to print out to download. 2 x 6-7 mm dowel or pencils 1 paper clip String 6 cms (2.5
More informationMURATA BOY Paper Craft
MURATA BOY Paper Craft Assembly Direction Download the paper craft data and print it out to assemble MURATA BOY. Complete the paper craft using all of the parts printed. It will make a nice family project.
More informationFitting Guide. Measuring your walls
Fitting Guide Measuring your walls Once you have decided where you are fitting your panels you need measure the width and the height of each wall you are fitting onto. Our panels can be laid vertically
More informationPlease read this page as it contains very important information about this printable package.
Please read this page as it contains very important information about this printable package. Fonts and editable text There is no need to download any fonts to use with this pdf file. To edit the editable.
More informationHoliday Helper. Little Take Out Box
Holiday Helper Little Take Out Box This little take-out box is great for hiding little treats, a pair of earrings or some cold hard cash! The stick slides out easily so the receiver and take a peek at
More informationSPOOKY FACES HALLOWEEN PARTY PRINTABLES
SPOOKY FACES HALLOWEEN PARTY PRINTABLES Before you get started, make sure you have everything you need for long-lasting, high-quality crafts and printables. Having the right supplies can make all the difference!
More informationPage 1 of 5. Instructions for assembling your PacknMove boxes
Instructions for assembling your PacknMove boxes The majority of our boxes are very easy to construct, but a couple might look like cardboard origami at first. If you are having any problems constructing
More informationtri-fold wallet a sewing pattern by
a sewing pattern by tri-fold wallet This project is for a basic wallet that folds up into thirds, but it features a contrast front band, snap closure, credit card pockets, cash pocket, and zippered coin
More informationFollow the numbered instructions that correspond to an illustration below:
Folded Christmas Star Materials needed: Colored or white paper X-acto knife and cutting mat or scissors Ruler Patience and practice :) Instructions Follow the numbered instructions that correspond to an
More informationConstellations. Assembly Line Cardmaking. January 2015 Greetings to Go
Assembly Line Cardmaking January 2015 Greetings to Go Constellations Constellations Materials: Greetings to Go Club Scrap Collection Unmounted (UM) Stamps Unmounted (UM) Borders & Backgrounds Unmounted
More informationThe Hamlin Assembly Instruction By Laser Dollhouse Designs
The Hamlin Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also gives
More informationSci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS. Cut, assemble and play
Sci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS Cut, assemble and play TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade).
More informationVanellope and Ralph explore the internet with help from the Netizens.
Vanellope and Ralph explore the internet with help from the Netizens. #RalphBreaksTheInternet Yesss is in charge of the trend-making website BuzzzTube. #RalphBreaksTheInternet Shank is a cool and talented
More informationTime to Celebrate Acetate Pop-Up Card Tutorial
Time to Celebrate Acetate Pop-Up Card Tutorial Wait til they see all those cupcakes popping up! Supplies Used: Stamp Set(s), Ink and Coloring Accessories: Cupcake Party by Stampin Up Coastal Cabana, Rich
More informationThe Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs
The Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and
More informationSkimmer Ground Effects Vehicle Technology Education Gelinas Jr High School
Skimmer Ground Effects Vehicle Student Name: Teacher: Mr. Moloney Technology Education Gelinas Jr High School Skimmer Page 1 STUDENT OBJECTIVES Define drag as the force that slows an object's movement
More informationFusing Instructions: Mini Beads
For this Nativity scene, the stable itself is made from regular size beads. All of the figures are made from mini beads. Instructions for Mini Beads Figures YOU WILL NEED: Mini Bead Pegboards: 4 squares
More informationCAUTION POTENTIAL INJURY:
Page 1 of 18 Loading the 250 or 550 sheet tray CAUTION POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the
More informationHubble Space Telescope Expert Model Exterior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Exterior Directions Downloads, patterns, and other information at: Materials: The patterns and instructions, which can be downloaded at. The pattern pieces should be
More information28 Tutorial Design and build a flatpack toy
8 Tutorial Design and build a flatpack toy CAP8.tut_flat 8 //0 :: pm Tutorial [illustration] Fwis Design, www.fwis.com Design and build a flatpack toy Use one of your favourite character designs to create
More informationAll seam allowances are 1/2 unless otherwise noted. All pattern pieces include the seam allowance. Please read all instructions before beginning.
This small bag will allow you to try out several fun bag-making techniques; adding a metal twist lock, using piping in a bag, making darts, and adding elastic pockets. Use your favorite print and combine
More informationTable Saw Gift Card Holder Designed By: Amanda Corbet May 2012
Table Saw Gift Card Holder Designed By: Amanda Corbet May 2012 Do you know someone who likes to work with wood? Do you want to give them a gift card in a really special way? This project would be perfect!
More informationPercy Pumpkin Head Light A KraftyBlok project.
Percy Pumpkin Head Light A KraftyBlok project. DESIGNED BY: Jeanne Baruth for Diamond Tech SKILL LEVEL: (Adult 1-5: 1 being the easiest, 5 being most difficult) 3 TIME TO COMPLETE: 2 hours not including
More informationTools: Scissors, hand held single-hole punch, metal ruler or other good straight-edge, sharp knife or Exacto-knife.
Instructions for Building a Kepler Paper Model Version 30 Mar 3, 2010 You need the following files: File Sheet # Printer Paper Color Kepler_model_instructionspdf plain b/w Photometerpdf 1 Photo stock color
More informationInstallation Manual. Architectural Essentials Accessories
Installation Manual Architectural Essentials Accessories 1 3 PIECE ARCHITECTURAL CORNER POST 2 WINDOW LINEAL INSTALLATION LINEAL STARTER STRIP 1. Measure the width and height of the window. Subtract 1/8
More informationSubaru Telescope: Assembly Instructions
http://www.canon.com/c-park/en/ Rules for assembling the Subaru Telescope Paper Craft Number each part on its backside after cutting out to avoid confusion. Indicates where sections should be glued together.
More information2017 Doll Tag Clothing Rebel Bandolier 1
2017 Doll Tag Clothing Rebel Bandolier 1 INDEX Cover Page Page 1 Pattern Information Page 2 Cutting Instructions Page 3 2017 Doll Tag Clothing Rebel Bandolier 2 Bandolier Instructions Page 4-6 Pattern
More informationElastic-powered Bus : Assembly Instructions
Elastic-powered Bus : Assembly Instructions Assembly Instructions 1. Carefully cut out the parts. 2. Fold along the dotted lines, making mountain or valley folds as indicated. 3. Attach the glue spots
More informationSingle Motor Hovercraft Manual
Single Motor Hovercraft Manual Please note: This is a step by step procedure to build a sample single propeller hovercraft. Supporting images have been provided which include the design. Readers are strongly
More informationSew Sweetness. Oriole Bag. Sara Lawson
Sew Sweetness Oriole Bag Sara Lawson Oriole Bag This bag comes in 2 different sizes and comes together quickly with the creative use of darts and front and back fabrics! Try your hand at using a bit of
More informationLet s make a gingerbread house!
Level A Let s make a gingerbread house! Fold here. Fold here. Fold here. Fold here. Have the children read the title and guess what they are going to make. First, have them color the picture with their
More informationPaper Toys The Easter Story Assembly Instructions
BIBLE Paper Toys The Easter Story Assembly Instructions TOOLS NEEDED Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth
More informationBreadth Assignment: Cut Paper Relief Sculpture
Breadth Assignment: Cut Paper Relief Sculpture AP Studio Art 3D Name Date You will create an alternating and repetitive design using at least two original designs and cut paper. PRACTICE AND FINAL DUE:
More informationStatue of Liberty, U.S.A.: Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc. Hiroshi Chiba / PAPERART-C
http://www.canon.com/c-park/en/ Before starting assembly:writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationAssembly Instructions for the Link Trainer
Assembly Instructions for the Link Trainer Edwin Link and his trainer: a brief history The Link Trainer holds a significant place in aviation history. It was the first true flight simulator, providing
More informationResurrection Extra - Stand-up Bible Characters
Resurrection Extra - Stand-up Bible Characters Safety Tips: Keep scissors out of reach of children. Keep all glue caps, marker caps and other small items out of reach of children age 3 or under, as they
More informationBEFORE YOU GET STARTED... MATERIALS & TOOLS
BEFORE YOU GET STARTED... MATERIALS & TOOLS You will need the following materials and craft tools to be able to make your diorama 5x sheets of A4 colored paper* 1x sheet of A4 white paper or card 1x cutting
More informationInstallation Instructions: Epson 1430 CFS
Installation Instructions: Epson 1430 CFS Prerequisite - Before starting this installation, you MUST test your printer to make sure it is printing 100% correctly. The best way to do this is to first print
More informationAssembly Instructions
Assembly Instructions Thank you for downloading the "YZF-R"paper craft model. By simply following this manual while referring to the names and numbers shown on the parts sheets, you can assemble an authentic-looking
More informationAssemble the head. Wedding Bear Bride : Assembly Instructions A1, B1. Use pattern: Page2/Page3.
A Assemble the head Use pattern: 2/3. Cut out by cutting along the lines. Cut along the line marked. Cut a slot right Glue down the glue in to the apex of Glue spot tabs one at a time the triangular in
More informationMay 2016 Greetings to Go. Creative License
Assembly Line Cardmaking May 2016 Greetings to Go Creative License Creative License Materials: Greetings to Go Tools and Supplies: Scor-Pal Adhesive Tape Foam Adhesive Paper Trimmer 3x14 CS Grid Ruler
More informationMaster Template Unusual Minibooks 1
Master Template Unusual Minibooks 1 Arrow 4-page 4 Minibook Cut out the 2 pages. Fold on the dotted lines. Place the inside pages inside the front page. Staple at the folded edge. Front page Back page
More informationInstallation for Full Size Polaris Ranger Crew Doors
Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated
More informationSeptember 2008 Greetings to Go Cyprus
September 2008 Greetings to Go Cyprus Materials: Cyprus Greetings to Go Cyprus Unmounted Font and Borders & Backgrounds Cyprus Wood Mounted Stamp Cyprus Wood Mounted Celebrate Everything Stamp Cyprus Wood
More informationThe Papernator 2003 created and designed by Clive Davis, NAR #80412
The Papernator 2003 created and designed by Clive Davis, NAR #80412 CG with motor loaded= 3.75 (9.6 cm) from base nose weight = 1/2 oz or 15 grams body tube nose cone shock cord mount fins (4 qty) launch
More informationVoltage Village - Glowing House Set - Bare ConductiveBare Conductive. Step-by-Step instructions to assemble your very own Voltage Village!
SEARCH CART NAV Voltage Village Glowing House Set Step-by-Step instructions to assemble your very own Voltage Village! INFORMATION SUGGESTED TUTORIALS In this tutorial we will show you how to assemble
More informationBirds Of Love. By Rebecca Yue. Materials Required: To Make The Card:
Birds Of Love By Rebecca Yue This delightful design unfolds piece by piece to reveal a message of love and although care needs to be taken to get the positions right it is deceptively simple to make. The
More informationNote. One - point Advice. To begin. Basic working method and markings. Fold along these lines. The printed surface should be
Note To begin Basic working method and markings Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin
More informationCreation on a Stick. 5. Make sure the number of the pattern and the number on the tongue depressor are on the same side.
Creation on a Stick Genesis 1 Read the children the story of creation from a children s Bible. Our God designed a beautiful world for us. It took God six days to form our earth and on the seventh day God
More informationA How-To From CHRYSANTHEMUMS
A How-To From DIPPED-Tip CHRYSANTHEMUMS How-to Materials Adding Color For personal use only / Copyright THUSSFARRELL, LLC. All rights reserved. 5 - Paper to Petal How-to How-to Materials Double-sided
More informationILLUSION CONFUSION! - MEASURING LINES -
ILLUSION CONFUSION! - MEASURING LINES - WHAT TO DO: 1. Look at the line drawings below. 2. Without using a ruler, which long upright or vertical line looks the longest or do they look the same length?
More informationBUILDING A VR VIEWER COMPLETE BUILD ASSEMBLY
ACTIVITY 22: PAGE 1 ACTIVITY 22 BUILDING A VR VIEWER COMPLETE BUILD ASSEMBLY MATERIALS NEEDED One Rectangular Cardboard piece from 12-pack soda case Two round bi-convex lenses with a focal point of 45mm
More informationHubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at: Materials: Construction tips: The patterns and instructions, which can be downloaded at. The pattern
More informationAssembly Instructions for Summit Motel Kits # SMFS and SMBD
Assembly Instructions for Summit Motel Kits # SMFS and SMBD Introduction Thank you for your purchase of the Summit Motel. This modern motel can be converted to almost any chain motel of your choice, depending
More information*All seam allowances are 1/4 unless otherwise noted. All pattern pieces include the seam allowance.
Kelley Crossbody Bag Supplemental Instructions to Online Video Course www.craftygemini.com http://craftygemini.com/2016cgbagclub 2015 Crafty Gemini LLC. All rights reserved. *This pattern cannot be photocopied,
More informationTrebuchet Construction Instructions
Trebuchet Construction Instructions Follow these instructions step by step to create your trebuchet. Materials: Trebuchet Template (6 pages cardstock) Trebuchet Template (1 page paper) One unsharpened
More informationMay 2008 Greetings to Go Body & Soul
May 2008 Greetings to Go Body & Soul Materials: Body & Soul Greetings to Go Body & Soul CS Wood Mounted Stamp Set Body & Soul Unmounted Borders & Backgrounds and Fonts Body & Soul I Love Your Spirit Stamp
More informationBIBLE. Paper Toys. Book 2 The Nativity House. The Nativity Story
BIBLE Paper Toys The Nativity Story Book 2 The Nativity House Bible Paper Toys The Nativity Story You can read the story of the first Christmas in Matthew 1:18 25, 2:1 11 and Luke 1:26 38, 2:1 20. Model
More informationHow to make a... Let it Snow Box Card~ Part 1. Shopping List:-
How to make a... Let it Snow Box Card~ Part 1 Shopping List:- Grand Calibur Die Cutting Machine : WIZCAL Spellbinders All in One Tool : WIZTOOL Sue Wilson `LET IT SNOW` Die Festive Collection : CED3004
More informationReunion. Assembly Line Cardmaking. December 2014 Greetings to Go
Assembly Line Cardmaking December 2014 Greetings to Go Reunion Reunion Materials: Greetings to Go Club Scrap Collection Unmounted (UM) Stamps Unmounted (UM) Borders & Backgrounds Unmounted Greeting Unmounted
More informationStirling Bridge. Card Model Kit
Stirling Bridge Card Model Kit On September 11, 1297, a Scottish Army led by William Wallace and Andrew de Moray defeated the English at the Battle of Stirling Bridge. In the briefest of descriptions,
More informationBed must be leveled and printer adjusted to produce good single layer prints. Measurement and calibration of your filament is highly recommended.
Printing Instructions: ABS or PET is preferred for durability. Bed must be leveled and printer adjusted to produce good single layer prints. Measurement and calibration of your filament is highly recommended.
More informationMILL LANE SIDINGS MLS052 Stock Storage Cassette System Kit For Peco Code 80 Flexible Track (not included)
Parts MILL LAN SIINS MLS052 Stock Storage Cassette System Kit or Peco Code 80 lexible Track (not included) A x1 x2 C x1 x6 x2 x1 x1 Parts and are only required to join two cassettes into one luing The
More informationActivity Instructions - Classroom Wind Farm
Wind Power - Classroom Wind Farm Activity Instructions - Classroom Wind Farm The purpose of this activity is for students to build their own windmill generator, which will then be one unit of the classroom
More informationShopping List:- Shopping List:- How to make a... Sue Wilson Striplet Card How to make a... Strictly Dancing Tri Fold Box
Shopping List:- Shopping List:- Grand Calibur Die Cutting Machine : WIZCAL Spellbinders All in One Tool : WIZTOOL Grand Sue Wilson Calibur Striplet Die Cutting Collection Machine Floral : WIZCAL Meadow
More informationBuild and Explore with Geocadabra
Build and Explore with Geocadabra Task : How to use the Geocadabra Construction Box. When you activate the software, you see a screen like this Click on Basic application. Click on Lower for the User level
More informationPress and Media Tower PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better!
Press and Media Tower PHOTO REAL BUILD KIT Innovative Hobbies Making Traditional Hobbies Better! INSTRUCTIONS for Kit # BK 6424 Free replacement parts are available simply by calling or by simply emailing
More informationDual Fidgety Art Bot. We enjoyed building our Trashy Art Bot just as much as our Fidgety Art Bot.
Dual Fidgety Art Bot Our instructions will take you through the step by step procedure to build a Dual Fidgety Art Bot, an Art Bot built with two fidget spinners stacked together. Since our investigation
More informationWayside Cottage Assembly Instructions By Laser Dollhouse Designs
Wayside Cottage Assembly Instructions By Laser Dollhouse Designs Parts for assembly Base Floor marked 1A thru 1L 13 post and 11 fences With one gate Walls 1A thru 1L and Alcove roof panels 3 lg and 1 sm
More information