Kongsberg Bits and Blades Catalog

Transcription

1 Kongsberg Bits and s atalog Top quality s for top quality results

2 In this brochure you will find more than 100 different knife blades, more than 100 different router bits, and a whole range of other accessories like plotting pens and refills, crease wheels, crease blades and milling accessories. To get the very best performance from your Kongsberg table, we develop these s in close cooperation with the manufacturers. Please be aware that developing new s for the Kongsberg tables is a ongoing process. For the latest updates and additions, visit the Esko Store at The new Kongsberg bits and blades finder in the Esko Store will help you select the bits and blades that fit best with your cutting table, s and cutting method. The advanced filtering option will help you narrow your bits and blades search result and you re able to compare products, allowing you to select the best suited for your job. Kongsberg bits and blades Tool to blade cross reference...2 Knife s....3 SR6xxx (single edge round 6 mm) oscillating blades mm shaft blades SFxxx (single edge flat) blades... 8 SR6xxx/DR6 (single/double edge round 6mm) static cutting blades K1xx (kiss cut) blades Special purpose heavy-duty flat blades DFxxx (double-edge flat) and Rxxx (rota cut) blades SR6xxx (single edge round 6 mm) foam blades SR6xxx (single edge round 6 mm) serrated blades SFxxx (single edge flat) foam blades SFxxx (single edge flat) serrated blades SFxxx (single edge flat) standard blades Bits mm multi purpose milling bits (up cut) mm multi purpose milling bits (down cut) and 8 mm super sharp milling bits (up cut) mm super sharp milling bits (down cut) Below you can see an example of a bit identifying code and how it describes the characteristics of the specific milling bit. 6 mm soft metal single flute bits (up cut) mm soft metal single flute bits (down cut) mm wood double flute bits (up cut) mm wood double flute bits (down cut) Bit Acrylic Up cut Single flute Shank Tip Flute Total 3 mm multi purpose milling bits mm super sharp milling bits mm special purpose milling bits Accessories...58 AUS accessories Drawing s rease Wheels mm crease wheels mm crease wheels mm crease wheels mm crease wheels and crease blades

3 Kongsberg bits and blades Tool to blade cross reference E s Static knife (depends on adapter) Page 9, 10, 12, 20, 30 Hi-force knife (depends on adapter) Page 9, 10, 11, 12, 20 ibracut (depends on adapter) Page 9, 10, 11, 12, 30 Psaligraphy knife Page 14 Pressut Page 16 Rotacut Page 20 aricut Page 12, 20 / s Rigid material knife Page 7 orruspeed knife Page 7 Hi-force knife (depends on adapter) Page 9, 10, 11, 12, 20 ibrating knife (Depends on adapter) Page 5, 9, 10, 11, 30 Hi freq ibrating knife (Depends on adapter) Page 5, 9, 10, 11, 30 Pressut Page 16 Rotacut Page 20 -notch ( Insert) Page 18 rease blade adapter Page 20 /// s Static knife (Depends on adapter) Page 9, 10, 30 Static knife Double edge Page 12, 20 Rigid material knife Page 7 orruspeed knife Page 7 ibrating knife (depends on ) Page 5, 9, 10, 30 Multi purpose Hi freq knife Page 5, 9, 10, 11, 30 Long stroke knife Page 5 Rotacut Page 20 Kissut knife Page 16 Microcut Bevel knife Page 11 -notch knife Page 18 -notch (Powerhead insert) Page 18 RB90 knife Page 18 rease blade adapter Page 20 The metals used to create our bits and blades are carefully selected to resist wear and breakage. Then, they are ground to extremely tight tolerances. Before they are shipped to you, they undergo 100% quality control to make sure you are working with the best possible s. Knife s Esko Kongsberg offers a wide range of high quality blades, specially designed to optimize your Kongsberg cutting system with focus on consistent production with top quality result and a minimum of machine down time for blade exchange. Kongsberg blades are developed, manufactured and tested by your Kongsberg team in association with selected blade manufacturers. By using our blades you ensure you are on top of the production and achieve the best quality cutting and the longest blade life. Benefits with your Esko Kongsberg knife blades Long life Lowest cost pr cutting meter Top quality cutting result More than 100 different blades optimized for a large range of materials Short lead times (stock in all continents) Kongsberg E Kongsberg Kongsberg Kongsberg Kongsberg Kongsberg 2 3

4 Knife s SR6xxx (single edge round 6 mm) oscillating blades SR6xxx (single edge round 6 mm) blades for cutting with oscillating knife. *E max cutting thickness: 6 mm- 1/4 E Tool insert part no. name Description cutting s optimized for cutting different grades of corrugated. Our various oscillating s come with different characteristics for optimized performance on a wide range of hard-to-cut materials. Stroke ranges from 0,3 mm to 8 mm and frequency ranges from 4000 to strokes pr minute. Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6223 Long life tungsten carbide blade. Works well with most types of corrugated board 12mm 1/2 E* TOP SELLER The knife blades shown in this section are designed to match the ing properties, enabling high speed and precision cutting across a wide range of materials. These are long-lasting tungsten carbide blades for maximum performance. Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6224 SR6242 Long life tungsten carbide blade. Preferable choice for corrugated board with high recycle content. Excellent blade for cutting tough gasket materials, even mesh armed graphite. For oscillate cutting with the High frequency knife s 12mm 1/2 E* 8mm 5/16 E* TOP SELLER s optimized for cutting different heavy duty paper-based and other sandwich materials. Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6310 Provides good results on thick and rigid paper-based materials, such as triple wall corrugated and Re-board, when used with the Multi Purpose High- Frequency Knife Tool. 20mm 3/4 TOP SELLER Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6307 Offers less over-cut than the SR6310 but is more slender and may deliver a less accurate cut on curves when cutting heavy board grades 20mm 3/4 s optimized for cutting foam board, other sandwich materials and rubber. corrugated dispay foam signage Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6303 Good blade for 15 and 20mm foam board in combination with the MP Hi Frequency. 20mm 3/4 Recip./MP HF knife Long stroke knife ibraut/hi Frequence ibraut knife SR6375 Good blade for cutting die ejection rubber in combination with the Long Stroke knife 20mm 3/4 Single Edge Round SR6310 Diameter Recip./MP HF knife Long stroke knife ibraut/hi Frequency ibraut knife Recip./MP HF knife Long stroke knife ibraut/hi Frequency ibraut knife Recip./MP HF knife Long stroke knife ibraut/hi Frequency ibraut knife SR6315 SR6316 SR6317 optimized for cutting soft sandwich materials. A more slender tungsten carbide blade producing less overcut. Good blade for cutting materials like soft foam board. Similar to the SR6315 but even thinner blade optimiced for finer details. thickness 0,3. Similar to the SR6315-SR6316 but even thinner blade optimiced for the finest details. thickness 0,2 14mm 9/16 E* 14mm 9/16 E* 14mm 9/16 E* 4 5

5 Knife s 8 mm shaft blades part number name Description cutting These blades have a centered tip. 0 lag. N/A DR8160 Good blade for cutting rigid materials such as different gasket materials, Forex and solid carton board. 0 lag blade 6mm 1/4 TOP SELLER This blade design gives the excellent performance when cutting rigid materials such as display carton, rigid plastics, foamed P (Forex / Sintra), and several gasket materials. These are long-lasting tungsten carbide blades for maximum performance. Our range of 8mm round shaft blades are superior for cutting many different rigid materials and corrugated board with the RM (Rigid Material) knife s and orruspeed both for the Kongsberg /// and the / platforms. The 8mm round stock blades come in three different shapes. The DR (double round) has a double edge and centered tip. The DR-A blades have an asymmetric, double edge. The purpose is to reduce burrs on one side of the cut, i.e. line direction control is required. The SR (single round) has a single edge. N/A DR8180 N/A SR8170 N/A SR8172 N/A SR8174 N/A DR8261A Similar to DR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but produces more overcut with thicker materials. 0 lag blade Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30 cutting edge Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. cutting edge Long life tungsten carbide blade for corrugated board, folding carton. 30 cutting edge. Modified tip for longer life time, gives marginally more over cut. 3/16 6, 1/4 4, 3/16 4, 3/16 These blades are asymmetrically grinded with a centered tip. 0 lag. Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. tip arrow grinding: 0,4-1,5 6, 1/4 NEW N/A DR8260A Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. tip arrow grinding: 0,5-1,0 6, 1/4 N/A DR8280A Special tungsten carbide knife blade with an asymmetric edge, optimized for a nice cut pushing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. 0 lag blade 3/16 hard plastic inlays corrugated plastic N/A DR8210A Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut pushing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. 0 lag blade 4mm 5/32 N/A SR8171A Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 30* cutting angle. Asymmetric knife blade that ploughs all burrs and waste to one side. 6, 1/4 Double Edge Round Diameter Assymetric N/A SR8173A Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 40* cutting angle. Asymmetric knife blade that ploughs all burrs and waste to one side. 4mm 5/32 These blades work with 4 mm lag. DR8280A N/A SR8124 Good blade for cutting different plastic corrugated materials. Nominal lag value is 4mm 3/8 N/A SR8140 Good blade for cutting different foam core materials. Nominal lag value is 4mm 7mm 9/32 N/A SR8160 N/A SR8180 N/A SR8184 Good blade for cutting rigid substrates such as different gasket materials, Forex and solid carton board. Nominal lag value is 4mm Similar to SR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but gives more overcut with thicker materials. Nominal lag value is 4mm For cutting thin paper and folding carton. Works well on very fragile and porous materials such as beer coasters with a lot of recycled content. Long life tungsten carbide. Nominal lag value is 4mm 13mm 1/2 8mm 5/16 4, 3/16 6 7

6 Knife s SFxxx (single edge flat) blades SFxxx (single edge flat) blades for general purpose cutting. E Tool insert part no. name Description cutting s optimized for cutting different grades of thinner materials like folding carton, paper and vinyl. MP HF knife Static knife single edge ibracut/hf ibraut SF216 (i-216) Single-edge blade for soft flexible materials. Used to through-cut paper, vinyl, etc 2-3mm TOP SELLER Hi-force knife Static knife MP HF knife Static knife single edge thin carton tabletop display gaskets ibracut/hf ibraut SF217 (i-217) Single-edge blade for soft flexible materials. Used to through-cut paper, vinyl, etc. The more pointed edge reduces overcuts 2-3mm TOP SELLER Hi-force knife Static knife Reciprocating knife Static knife F SF238 For folding carton and other high-precision applications with long lifetime requirement. Tungsten carbide steel with precision ground and polished edge, which handles softer, abrasive materials very well. --- Reciprocating knife Static knife F SF224 For folding carton and other high-precision applications with long lifetime requirement.. Tungsten carbide steel with precision ground and polished edge. The top part of the tip is grounded off, to prevent snapping. --- flexo plates solid board box Static knife single edge ibracut/hf ibraut Static knife ariut knife SF230 (i-230) Mat cutting, frame cutting, passpartout and more. This is a single edge design. 2mm 5/64 Single Edge SF238 Flat Static knife single edge ibracut/hf ibraut Static knife ariut knife SF231 (i-231) Mat cutting, frame cutting, passpartout w/ small radius and more. This is a single edge design with a flat tip. 2mm 5/64 8 9

7 E Tool insert part no. name Description cutting E Tool insert part no. name Description cutting s optimized for cutting different grades of thinner materials like folding carton, paper and vinyl. s for cutting rubber and similar materials Static knife single edge ibracut/hf ibraut Static knife ariut knife SF233 (i-233) Mat cutting, frame cutting, passpartout w/ small radius and more. This is a asymmetric single edge design with a flat tip MP HF knife MP HF knife SF428 (i-428) SF429 (i-429) orr ugated stock, foam board. This is an oscillate knife with a 4 /45 cut angle, a single edge design, flat tip. Soft Materials, foam board and more. This is an oscillate knife with a 3.5 /45 cut angle, a single edge design. 23mm.90 29mm 1.10 s for cutting in 45 degrees angle with the Bevel knife s optimized for cutting corrugated board with high recycled content; can also perform well in foam board. Reciprocating knife Static knife TW SF125 For corrugated board up to and including TW. Precision ground edge. Made of high speed steel, which will last longer than conventional steel. Used by customers who need to cut corrugated with high recycle content, or those wanting longer blade lifetime 16mm 5/8 Bevel knife SF212 SF245 A special tungsten carbide knife blade design that has been developed for optimal performance in flexo plate materials A special tungsten carbide knife blade for cutting -notch folding lines in solid board carton 7mm 9/32 6mm 1/4 s for cutting rubber and similar materials s for static cutting of gaskets and other highly abrasive materials. MP HF knife ibracut/hf ibraut Hi-force knife MP HF knife ibracut/hf ibraut Hi-force knife SF420 (i-420) SF421 (i-421) Tungsten carbide steel, precision ground edge. For high performance and long lifetime in rubber materials orrugated stock, foam board and more. for oscillate knife with a 5 /25 cut angle, a single edge design 3/8 3/8 Static knife gasket SF310 SF320 SF311 SF321 Specially designed blades for gasket cutting, but may be useful for other applications such as corrugated samplemaking. Specially designed T blades for gasket cutting, but may be useful for other applications such as corrugated samplemaking. The blade is well suited for cutting highly abrasive materials that are not very hard The blade is well suited for cutting highly abrasive materials that are not very hard 3/8 3/8 7mm 9/32 7mm 9/32 s optimized for cutting gasket materials with the MP HF knife MP HF knife ibracut/hf ibraut SF422 (i-422) orrugated stock, foam board and more. for oscillate knife with a 10 /25 cut angle, a single edge design 3/8 MP HF knife HF ibraut SF312 For Gasket, Highly abrasive materials, not really hard T. PM10 Extreme Wear Tool Steel (EWTS) is 25x tougher than -Acto and more flexibel than T. Angle 30 degrees 7mm 9/32 Hi-force knife MP HF knife SF425 (i-425) ard stock, rubber and more. This is an oscillate knife with a 10 /25 cut angle, a single edge design, flat tip 6mm ¼ MP HF knife HF ibraut SF313 For Gasket, Highly abrasive materials, not really hard T. PM10 Extreme Wear Tool Steel (EWTS) is 25x tougher than -Acto and more flexibel than T. Angle 45 degrees 7mm 9/32 MP HF knife MP HF knife ibracut/hf ibraut Hi-force knife SF426 (i-426) SF427 (i-427) ard stock, rubber and more. This is an oscillate knife with a 10 /25 cut angle, a single edge design, flat tip cutting textiles, fabrics, fibrous tissues. This is an oscillate knife with a 10 /25 cut angle, a single edge design, flat tip. 6mm ¼ 3/8 Static knife double edge Static knife double edge SF246 (i-246) SF346 (i-346) s for cutting foam core board materials core board blade for double- edge insert Soft and rigid foam blade for double- edge insert with 45 edge. 3/8 3/

8 Knife s SR6xxx/DR6 (single/double edge round 6mm) static cutting blades * This new can take all the knife blades in this category. E Tool insert part number name Description cutting SR6xxx / DR6 (single/double edge round 6 mm) blades for static cutting with the Hi-Force knife, Static knife and Psaligraphy knife. These are long lasting tungsten carbide blades for maximum performance. The 6mm round stock blades come in three different shapes, all with a centered tip. The SR (single round) has a single edge. The DR (double round) has a double edge and centered tip. The DR-A blades have an asymmetric double edge. The purpose is to reduce burrs on one side of the cut (i.e., line direction control is required). Hi-Force Knife ariut Knife Static Knife Psaligraphy Knife * N/A Hi-Force Knife ariut Knife Static Knife Psaligraphy Knife * N/A s optimized for cutting different thinner flexible materials SR6150 SR6152 Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30* cutting angle. Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 40* cutting angle. TOP SELLER Static Knife ariut Knife Hi-Force Knife Psaligraphy Knife * N/A SR6151 Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 22* cutting angle 3/16 s optimized for cutting different thinner flexible or rigid materials Hi-Force Knife ariut Knife Static Knife Psaligraphy Knife * N/A DR6160 Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 2x30* cutting angle. Spear-headed shape. 3/16 TOP SELLER Hi-Force Knife folding carton package thin plastic cards ariut Knife Static Knife Psaligraphy Knife * N/A DR6161 Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 2x40* cutting angle. Spear-headed shape. 3mm 1/8 Asymmetric knife blade that pushes all burrs and waste to one side for thinner flexible or rigid materials Single Edge Round SR6150 Diameter Hi-Force Knife ariut Knife Static Knife Psaligraphy Knife * N/A Hi-Force Knife ariut Knife Static Knife Psaligraphy Knife * N/A DR6169A SR6159A Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 2x40* cutting angle. Spear-headed shape. Asymmetric knife blade that pushes all burrs and waste to one side. Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 40* cutting angle. Asymmetric knife blade that ploughs all burrs s and waste to one side. 3mm 1/8 3mm 1/

9 Knife s K1xx (kiss cut) blades x E Tool insert/unit part no. name Description cutting s optimized for kiss cutting various thinner flexible materials K1xx (kiss cut) blades for cutting various thin materials like adhesive foils, paper etc. The blades are kept in the body with a friction lock. Pressut Kiss ut knife N/A K101 (i-101) General purpose kiss-cutting blade for standard thickness adhesive foils. Its properties allow secure separation of foil and adhesive, to facilitate weeding 1mm 1/25" TOP SELLER Pressut Kiss ut knife N/A K102 (i-102) Sharper-edged blade for thicker, tougher adhesive foils, such as reflex foil 1mm 1/25" Pressut Kiss ut knife N/A K103 (i-103) Masking Film. This is a vinyl knife with a /35 cut angle, a double edge design. 1mm 1/25" Pressut Kiss ut knife N/A K104 (i-104) A sharper general purpose kiss-cutting blade for fine details in adhesive foils, Its properties allow secure separation of foil and adhesive, to facilitate weeding 1mm 1/25" adhesive vinyl decals reflective vinyl roll Pressut Kiss ut knife N/A K105 (i-105) Rubber, ardboard, diamond grade and more. This is a vinyl Knife, with a 20 /55 cut angle, a single edge design.and adhesive, to facilitate weeding 1mm 1/25" Pressut Kiss ut knife N/A K154 (i-154) Thicker vinyl, diamond grade, carton, polyester fabric and more. This is a vinyl knife with a 30 /30 cut angle, a single edge, long design and adhesive, to facilitate weeding 1mm 1/25" Kiss ut K

10 Knife s Special purpose heavy-duty flat blades Tool insert part no. name Description cutting Special purpose heavy-duty flat blades, TZ1xx, TZ5xx, (Trapezoid), DF5, (double flat), SF29x (single flat) PowerHead HD unit -Notch holder Tungsten carbide blades optimized for long-life -notch cutting tough paper-based materials like Re-board, triple wall corrugated, etc TZ511 ery good blade for -notch cutting through materials such as Re-board, -board and triple wall corrugated. uts materials up to about 17mm. Made from a special tungsten carbide alloy, to extend cutting cycles. Thickness 0.6mm mm 43/64 PowerHead HD unit -Notch holder / HD knife TZ512 ery good blade for -notch and straight cutting with the HD-knife through materials such as Re-board, -board and triple wall corrugated. uts materials up to about 17mm. Made from a special tungsten carbide alloy, to extend lifetime. Thickness 0,9mm,035" 17mm 43/64 Standard blades for cutting tough paper-based materials like Re-board, triple wall corrugated, etc. PowerHead HD unit -Notch holder TZ129 Super-trapezoid, deep-edged blade, used with the -notch knife and the HD-knife. This blade is thicker and stiffer than standard trapezoid blades and will give a more accurate cut. Thickness 0.9mm mm 43/64 Re-board sheet with v-notch Re-board display PowerHead HD unit -Notch holder / HD knife TZ192 Super-trapezoid, deep-edged blade, used with the -notch knife and the HD-knife. This blade is thinner than the TZ129 blade and will give very good result in fluted core board. Thickness 0.6mm mm 43/64 Trapezoid TZ129 PowerHead HD unit HD knife 30 Tungsten carbide blades optimized for long-life high-speed straight cutting tough paper-based materials like Re-board, triple wall corrugated, etc TZ230 Special trapezoid blade for the HD30 knife, designed for Re-board and similar material in thickness up to and including 30mm Tungsten carbide steel material with precision ground edge 30mm 13/16 Tungsten carbide blades optimized for long-life -notch cutting tough paper-based materials like Reboard, triple wall corrugated, etc., for use in the I45 insert. All insert positions on / / heads I45-16 and I Notch insert DF570 Specially made arrow-shaped blade for the Ixx-16 -notch insert s. Works well in materials such as fluted core boards and triple wall corrugated. Made from a special Tungsten arbide alloy, to extend lifetime. Thickness 0.9mm mm 5/8 All insert positions on / / heads I45-16 and I Notch insert DF571 Specially made arrow shaped, blade for the Ixx-16 -notch insert s. Works well in materials such as fluted core boards and triple wall corrugated. Made from a special Tungsten arbide alloy, to extend lifetime. Thickness 0.6mm mm 5/

11 Tool insert part no. name Description cutting Buy your Kongsberg All insert positions on / / heads I45-16 and I Notch insert DF572 Specially made double angle arrow shaped, blade for the Ixx-16 -notch insert s. Have superb performance in materials like Kappa and other foamed core board. Works also well in materials such as fluted core boards and triple wall corrugated. Made from a special Tungsten arbide alloy, to extend lifetime. Thickness 0.6mm mm 5/8 bits & blades online All insert positions on / / heads I Notch insert DF561 Specially made arrow shaped, blade for the I notch insert. Works well in materials such as fluted core boards and triple wall corrugated. Made from a special Tungsten arbide alloy, to extend lifetime. Thickness 0.6mm mm 3/8 All insert positions on / / heads I Notch insert DF562 Specially made double angle arrow shaped, blade for the I notch insert. Have superb performance in materials like Kappa and other foamed core board. Works also well in materials such as fluted core boards and triple wall corrugated. Made from a special Tungsten arbide alloy, to extend lifetime. Thickness 0.6mm mm 3/8 Tungsten carbide blades optimized for long-life high speed straight cutting tough paper-based materials like Re-board, triple wall corrugated, etc. All insert positions on / / heads RB90 insert SF290 Specially made blade for the RB90-16 insert. Works well in materials such as fluted core boards and triple wall corrugated. Made from a special tungsten carbide alloy, to extend lifetime. Thickness 0.9mm mm 5/8 18

12 Knife s DFxxx (double-edge flat) and Rxxx (rota cut) blades E Tool insert part no. name Description cutting Double-edge blades with a centered tip. Have grinded edge on both Double-edge flat blades with a centered tip for cutting hard, thinner materials. R blade for cutting textile materials with the Rotaut s. These are long lasting tungsten carbide blades for maximum performance. Static knife double Heavy duty Insert for PowerHead / HD unit DF212 (i-312) General-purpose, double-sided, 80º sword knife blade for flexible materials. Used for throughcutting paper, cardboard, vinyl, thin plastics, styrene, etc 3/16 Static knife double Heavy duty Insert for PowerHead / HD unit DF213 (i-313) General-purpose, double-sided, 60º sword knife blade for flexible materials. Used for throughcutting paper, cardboard, vinyl, thin plastics, styrene, etc. 3/16 Half- double-edge blades with a centered tip. Hi-Force knife Static knife ariut DF112 (i-308) General-purpose, double-sided, 80º sword knife blade for flexible materials. Used for throughcutting paper, cardboard, vinyl, thin plastics, styrene, etc 3/16 paper invitations contour cut textile display Hi-Force knife Static knife ariut DF113 (i-309) General-purpose, double-sided, 60º sword knife blade for flexible materials. Used for throughcutting paper, cardboard, vinyl, thin plastics, styrene, etc. 3/16 Ten-facetted rotating knife blade for cutting textiles Double Edge Flat Rotaut for / / Rotaut for E/ / N/A blade fits directly in R110 R10 Decagonal knife blade with a 2. For use on textile materials with the Rotaut 1, 1/16 DF

13 Knife s SR6xxx (single edge round 6 mm) foam blades These are long lasting tungsten carbide blades for maximum performance. tn Tool insert part no. name Description cutting s for cutting different grades of foam materials up to maximum 30 mm -1 ¼ thickness cutting performance determined by matching knife blade design and properties such as oscillation frequency and stroke. With and tables, the foam ing requires high (95 mm) traverse clearance. The pointed blades often provide the best detail accuracy. With the pointed blades it is possible to increase cutting speed by using the 5,5 mm felt cutting underlay. Knife Head Unit Knife Head Unit SR SR6312 for max. 30mm material thickness. 2.5 cutting angle enables very fine details with little over-cut in foam qualities with good cutting properties. Pointed tip for use with felt underlays for max. 30mm material thickness. 6 cutting angle enables fine details in a variety of foam materials. Pointed tip for use with felt underlays 32mm 1 1/4 32mm 1 1/4 Knife Head Unit SR6313 for max. 30mm material thickness. 8 cutting angle enables fine details in a wider range of foam qualities, as well as 30mm Re-board. Flattened tip helps increase cutting speed and protect P cutting underlays 32mm 1 1/4 TOP SELLER s for cutting different grades of foam materials up to maximum 55 mm -2 1/8 thickness Head Unit SR6521 for max. 5 material thickness. 2.5 cutting angle enables very fine details with little over-cut in foam qualities with good cutting properties. Pointed tip for use with felt underlays 5 2 1/8" Head Unit SR6522 for max. 5 material thickness. 3.7 cutting angle enables fine cutting details. Pointed tip for use with felt underlays 5 2 1/8 dense foam printed sign protective packaging Head Unit SR6523 for max. 5 material thickness. 3.7 cutting angle enables fine cutting details. Flattened tip to increase cutting speed and protect P cutting underlays 5 2 1/8 s for cutting different grades of foam materials up to maximum 80 mm -3 1/8 thickness Single Edge Round SR6313 Diameter Head Head SR SR cutting angle enables very fine cutting details, minimal overcut and largely eliminates conical holes. Pointed tip for use with felt underlays 1.5 cutting angle enables very fine cutting details, minimal overcut and largely eliminates conical holes. Flattened tip to increase cutting speed and protect P cutting underlays 80mm 3 1/8 80mm 3 1/

14 Knife s SR6xxx (single edge round 6 mm) serrated blades SR6xxx (single edge round 6mm) serrated blades for cutting different qualities and thicknesses of honeycomb and papercore board materials. Also good for some dense foam materials. Tool insert part no. name Description cutting s for cutting different grades of tough paper materials up to maximum 30 mm -1 ¼ thickness Our oscillating foam cutting s are optimized to work with these knife blades with regards to stroke amplitude and frequency. For the and, these s require high (95 mm) traverse clearance. When working with these s and blades, you can often achieve better productivity with the 5,5 mm felt cutting underlay. Knife Head Unit Knife Head Unit SR SR6352 The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1 mm - 1/25", pointed edge for use with felt underlay. The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1 mm - 1/25", flattened tip to increase cutting speed and protect P cutting underlays 32mm 1 1/4 32mm 1 1/4 These are long lasting tungsten carbide blades for maximum performance. cutting performance determined by matching knife blade design and properties such as oscillation frequency and stroke. With and tables, the foam ing requires high (95 mm) traverse clearance. The pointed blades often provide the best detail accuracy. With the pointed blades it is possible to increase cutting speed by using the 5,5 mm felt cutting underlay. Knife Head Unit Knife Head Unit SR SR6354 The serrated cuts with gives less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1,5 mm -,006", pointed edge for use with felt underlay. The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1,5 mm -,006", flattened tip to increase cutting speed and protect P cutting underlays 32mm 1 1/4 32mm 1 1/4 s for cutting different grades of paper sandwich materials up to maximum 55 mm -2 1/8 thickness Head Unit SR6551 The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1 mm - 1/25", pointed edge for use with felt underlays /8 Head Unit SR6552 The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1,5 mm -.006", pointed tip for use with felt underlays /8 Head Unit SR6553 The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. Thickness 1 mm - 1/25", flattened tip to increase cutting speed and protect P cutting underlays /8 thick Re-board honeycomb signs Single Edge Round SR6351 Diameter 24 25

15 Knife s SFxxx (single edge flat) foam blades SFxxx (single edge flat) blades for cutting foam material of different grades and thicknesses. Tool insert part no. name Description cutting s for cutting different grades of foam materials up to maximum 40 mm -1 ¼ thickness Knife These blades are made of HSS steel, which means it is less expensive and also offers less tendency to snag compared to tungsten carbide. Our oscillating foam cutting s are optimized to work with these knife blades with regards to stroke amplitude and frequency. For the and, these s require high (9) traverse clearance. When working with these s and blades, you can often achieve better productivity with the 5, felt cutting underlay. Head Unit Knife Head Unit SF501 SF502 Excellent general purpose foam knife - very sharp and durable This blade has the same advantages as SF501. The greater sloping edge allows for a slightly faster feed rate and improves cutting ability in softer materials. However, it will have a negative influence on quality effect with narrow curves 40mm 1 9/16" 40mm 1 9/16" s for cutting different grades of foam materials up to maximum 60 mm -2 3/8 thickness Head Unit SF505 Excellent general-purpose knife - very sharp and durable 60mm 2 3/8 Head Unit SF506 This blade has the same advantages as SF505. The greater sloping edge allows for a slightly faster feed rate but will have a negative quality effect with narrow curves 60mm 2 3/8 s for cutting different grades of foam materials up to maximum 86 mm -3 3/8 thickness Head SF509 Specialty blade for the Head. Excellent general-purpose foam knife - very sharp and durable. uts up to 86mm [3 3/8 ] thick material 86mm 3 3/8 dense foam sign letters protective packaging Single Edge Flat Diameter SF

16 Knife s SFxxx (single edge flat) serrated blades SFxxx (single edge flat) serrated blades for cutting different qualities and thicknesses of honeycomb and papercore board materials. Also good for some dense foam materials. x Tool insert part no. name Description cutting s for cutting different grades tough paper materials up to maximum 40mm -1 9/16 thickness Our oscillating foam cutting s are optimized to work with these knife blades with regards to stroke amplitude and frequency. For the and these s require the high (95 mm) traverse clearance. When working with these s and blades, you can often achieve better productivity with the 5,5 mm felt cutting underlay. These blades are made of HSS steel, which means a lower price and less tendency to snag compared to tungsten carbide. Knife Head Unit Knife Unit SF503 SF504 Designed for cutting paper honeycomb material. Suitable also for some dense foam materials, which are vulnerable to melting. The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. This blade has the same advantages as SF503. The greater sloping edge allows for a slightly faster feed rate and may improve cutting ability in softer materials, but will have a slightly negative quality effect with narrow curves 40mm 1 9/16 40mm 1 9/16 s for cutting different grades of paper sandwich materials up to maximum 60mm -2 3/8 thickness Head Unit SF507 Designed for cutting paper honeycomb material. Suitable also for some dense foam materials that are vulnerable to melting. The serrated edge cuts with less friction between blade and material than a smooth edge. Thus, the blade gets less hot. 60mm 2 3/8 Head Unit SF508 This blade has the same advantages as SF507. The greater sloping edge allows for a slightly faster feed rate and may improve cutting ability in softer materials but will have a slightly negative quality effect with narrow curves 60mm 2 3/8 s for cutting different grades of tough paper materials up to maximum 86mm -3 3/8 thickness Re-board point of purchase display Re-board furniture Head SF511 Honeycomb and foam knife with serrated edge. ery sharp and durable. uts up to 86mm [3 ] thick material 86mm 3 3/8 Single Edge Flat SF

17 Knife s SFxxx (single edge flat) standard blades SFxx (single edge flat) standard blades for cutting in different materials. E Tool insert/unit part no. name Description cutting Standard low-cost blades for samplemaking with different materials. Static knife TW SF102 Knife for triple wall samplemaking. Static knife F SF172 The furthest part of the tip is ground off to avoid snapping. Preferred by customers for folding cartons, Equivalent to SF186, but slightly shorter. Reciprocating knife Static knife F ibracut / HF ibraut SF186 Used for corrugated samplemaking. NOT suitable for production runs since tip is very brittle and blade is subject to flexing paper beer coasters folding carton package Static knife F Microcut N/A SF110 Good choice for folding carton. More durable than the ASR and cuts with less plow effect in the cut edges. Also suitable for varnish blankets with the Microut Tool Single Edge SF177 Flat Static knife F SF177 Microcut N/A Static knife SF184 Used by many customers for F samplemaking. Produces a nice cut in thin carton. Tip will last long, due to edge angle. an also be used for chipboard. Good choice for cutting varnish blankets ery rigid and will bend less than most other standard carbon steel blades.good standard blade for folding carton, and other thin,compact materials such as polycarbonate and other synthetics. 6mm 1/4 Static knife single edge SF210 (i-210) HSS Flat knife, 40 degree cut angle, single edge design 30 31

18 Bits When handling and storing milling bits, always treat them with great care. The bits are manufactured from tungsten carbide, and the sharp edges are very easily chipped and degraded if they get in touch with any hard 6 mm multi purpose milling bits (up cut) surface. To achieve maximum milling precision, always try to adjust the depth of cut as close as possible to the thickness of the material when selecting a milling bit for a certain job. Our 6 mm multi purpose milling bits come in a large range of tip s and spiral s. See chart for more details on milling, milling thickness and recomended RPM. When cutting material is significantly thicker than the cutting, the best approach is to set the milling lines as multi-pass operations; executing each shape multiple times, digging gradually deeper into the material. As a general rule, the depth of each pass should not exceed times the of the cutting. There will, however, be materials where either a smaller or larger depth step is appropriate. For milling jobs, it is recommended to program feed rates in absolute values (i.e., m/min or ips; not as a percentage of maximum speed). Most applications are best finished using up cut bits due to better chip removal performance. If you encounter print chipping or lamination separation/damage, use a down cut bit to achieve the best top finish. A down-cut bit can also be beneficial in cases where there is a problem holding down the material. back printed acrylic contour cut pvc Bit Multi Purpose Up ut Single flute Shank Tip Flute Total MUS

19 Bits * max RPM = 45 6mm Up ut Bit 6mm Up ut Bit oated 6mm Up ut Bit Double Flute HSMU = 1kW HPMU = 3kW MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW / starter ollets part no. Bit part no. Bit name Description milling RPM / starter ollets part no. Bit part no. Bit name Description milling RPM HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MUS (i-3854) MUS MUS MUS (i-3816 i-3862 i-3866) MUS MUS MUS MUS MUS (i-3824 i-3874) MUS MUS MUS (i-3880) 13mm 1/2" 20mm 13/16 20mm 13/16 20mm 13/16 50 TOP SELLER HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MUS (i-5854) MUS (i-3888) MUS (i-3889) MUS MUS MUS MUS single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree 20mm 13/16 30mm 1 3/16 TOP SELLER NEW NEW 34 35

20 / starter ollets part no. Bit part no. Bit name Description milling RPM Bits 6 mm multi purpose milling bits (down cut) HSMU M Ibag M M Kavo HPMU HPMU M HP MUS single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. TOP SELLER Our 6 mm multi purpose milling bits come in a large range of tip s and spiral s. See chart for more details on milling, milling thickness andrecomended RPM. HSMU M Ibag M M Kavo HPMU HPMU M HP MUS single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree NEW HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MUS MUS MUS single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree NEW NEW Bit plastic standing display Multi Purpose Down ut Single flute Shank MultiUT Tip MD S Flute Total HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MUD (i-2624) MUD (i-2626) double flute bit. double flute bit. 14mm 9/16" 23mm 7/8" 36 37

21 * max RPM = 45 Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW MultiUT Ibag = 1kW MultiUT = 1kW, max RPM = 45 MultiUT Kavo = 1kW MultiUT HP = 3kW Bits 6 and 8 mm super sharp milling bits (up cut) // starter ollets part no. Bit part no. Bit name Description milling RPM Our 6mm super sharp milling bits come in a large range of tip s and spiral s. See chart for more details on milling, milling thickness and recommended RPM. The Super Sharp bits are grinded / polished for an optimized routing surface. HSMU M Ibag M M Kavo HPMU HPMU M HP MDS (i-2854) Multi purpose, downcut, 3mm - 1/8" HSMU M Ibag M M Kavo HPMU HPMU M HP MDS Multi purpose, downcut, HSMU M Ibag M M Kavo HPMU HPMU M HP MDS (i-2862 i-2866) Multi purpose, downcut, HSMU M Ibag M M Kavo HPMU HPMU M HP MDS Multi purpose, downcut, 7mm 9/32" HSMU M Ibag M M Kavo HPMU HPMU M HP MDS (i-2804) Multi purpose, downcut, 7mm 9/32" acrylic acrylic HSMU M Ibag M M Kavo HPMU HPMU M HP MDS (i-2874) Multi purpose, downcut, HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MDS (i-2880) MDS (i-2888) Multi purpose, downcut, Sintra, Styrene, Acrylic, Polycarbonate, Dibond, with top print/ laminate 20mm 1 20mm 13/16 50 Bit Acrylic Up ut HSMU HPMU HPMU MDS (i-2889) Routing for soft/hard plastic Sintra, Styrene, Acrylic, Di-bond, i.e. w/ top print/laminated 30mm 1 3/16 50 Single flute Shank Tip AUS Flute Total 38 39

22 * max RPM = 45 6mm Up ut Bit 8mm Up ut Bit HSMU = 1kW HPMU = 3kW MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW Bits 6 mm super sharp milling bits (down cut) // Starter ollets part no. Bit part no. Bit name Description milling RPM Our 6 mm super sharp milling bits come in a large range of tip s and spiral s. See chart for more details on milling, milling thickness and recomended RPM. The Super Sharp bits are grinded / polished for an optimized routing surface. HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, - HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, - HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, - TOP SELLER HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, 13mm - 1/2" HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, 20mm 13/16 polystyrene core sign acrylic HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, 7mm - 9/32" HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP AUS AUS AUS up-cut, up-cut, up-cut, - 20mm 13/16 11mm - TOP SELLER Bit Acrylic Down ut Single flute Shank Tip AD S Flute Total HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP AUS AUS up-cut, up-cut, 20mm 13/16 11mm

23 // Starter ollets part no. Bit part no. Bit name Description milling RPM Bits 6 mm soft metal single flute bits (up cut) HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, 20mm 13/16 TOP SELLER 6 mm multi purpose bits are ideal for milling soft metals such as aluminum. See chart for more details on milling, milling thickness and recommended RPM. HSMU M Ibag M M Kavo HPMU HPMU M HP AUS up-cut, 30mm - 1 1/8" HPMU HPMU AUS up-cut, 40mm - 1 1/2" 30 HPMU HPMU AUS up-cut, 50mm - 2" 30 AM aluminum sign letters Bit Soft Metals Up ut Single flute Shank Tip Flute Total SUS

24 * max RPM = 45 Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW Bits 6 mm soft metal single flute bits (down cut) // Starter ollets part no. Bit part no. Bit name Description milling RPM 6 mm multi purpose bits are ideal for milling soft metals such as aluminum. See chart for more details on milling, milling thickness and recommended RPM. HSMU M Ibag M M Kavo ADS down-cut, single flute bit. - 3/16 HPMU HPMU M HP HSMU M Ibag M M Kavo ADS down-cut, single flute bit. - HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP ADS down-cut, single flute bit. - 3/8 printed AM AM Sign HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M ADS down-cut, single flute bit. 7mm - 9/32 Bit Soft Metals Down ut Single flute M Kavo HPMU HPMU M HP ADS down-cut, single flute bit. 11mm - 3/8 HSMU M Ibag M M Kavo HPMU HPMU M HP ADS down-cut, single flute bit. 20mm 13/16 Shank Tip Flute Total SD S

25 Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW * max RPM = 45 MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW * max RPM = 45 MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW // starter ollets part no. Bit part no. Bit name Description milling RPM // starter ollets part no. Bit part no. Bit name Description milling RPM HSMU M Ibag M M Kavo HPMU HPMU M HP SUS (i-3916) Aluminum, hard laminate with top print/laminate or blank 12mm 15/32 HSMU M Ibag M M Kavo HPMU HPMU M HP MUS single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. TOP SELLER HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP SUS (i-3924) SUS (i-3930) MUS MUS MUS MUS Aluminum, hard laminate with top print/laminate or blank Aluminum, hard laminate with top print/laminate or blank single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree 20mm 13/16 16mm 3/8 NEW NEW HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MUS MUS MUS MUS single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree single flute, coated. Special variety of multi purpose milling bit, coated for better performance with different materials like aluminum and AM. Multi purpose, up-cut,single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree single flute, Special variety of multi purpose milling bit, premium coating for better performance and life time in different materials like aluminum and AM. Helix 30 degree 3/8 3/8 3/8 NEW NEW NEW 46 47

26 / / Starter ollets part no. Bit part no. Bit name Description milling RPM Bits 6 mm wood double flute bits (up cut) HSMU M Ibag M M Kavo SDS (i-2916) Aluminum, hard laminate with top print/laminate 12mm 15/32 6 mm multi purpose bits are ideal for milling soft metals such as aluminum. See chart for more details on milling, milling thickness and recommended RPM. HPMU HPMU M HP HSMU M Ibag M M Kavo SDS (i-2924) Aluminum, hard laminate with top print/laminate 20mm 13/16 HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP SDS (i-2930) Aluminum, hard laminate with top print/laminate 16mm 5/8 50 wood signs wood composite Bit Wood Up ut Double flute Shank Tip Flute Total WUD Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW * max RPM = 45 MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW // Starter ollets part no. Bit part no. Bit name Description milling RPM HSMU M Ibag M M Kavo WUD (i-5210) Soft hard composite wood with top print laminate. 16mm 5/8 50 HPMU HPMU M HP HSMU M Ibag M M Kavo WUD (i-5212) Soft hard composite wood with top print laminate HPMU HPMU M HP

27 Bits 6 mm wood double flute bits (down cut) 3 mm multi purpose milling bits 6mm multi purpose bits are ideal for milling wood and wood composite materials. See chart for more details on milling, milling thickness and recommended RPM. 3 mm multi purpose bits are ideal for milling many small details and inside radiuses in thinner materials. They can all be runned at full RPM on all platforms. wood printed wood sign printed pvc with fine detail fine detailed aluminum sign Bit Wood Down ut Double flute Shank Tip Flute Total Bit Multi Purpose Up ut Single flute Shank Tip Flute Total WDD MUS Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW * max RPM = 45 MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW // Starter HSMU M Ibag M M Kavo ollets part no. Bit part no. Bit name Description WDD (i-5710) Soft hard composite wood with top print laminate milling 16mm 5/8 RPM 50 HPMU HPMU M HP HSMU M Ibag M M Kavo WDD (i-5712) Soft hard composite wood with top print laminate HPMU HPMU M HP

28 * max RPM = 45 Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW MultiUT = 1kW MultiUT = 1kW max RPM 45 MultiUT HP = 3kW Bits 3 mm super sharp milling bits // Starter ollets part no. Bit part no. Bit name Description milling RPM 3 mm super sharp milling bits are ideal for milling many small details and inside radiuses in thinner materials. They can all be runned at full RPM on all platforms. The Super Sharp bits are grinded / polished for an optimized routing surface. HSMU M M HPMU HPMU M HP MUS mm 1/8" HSMU M M HPMU HPMU M HP MUS HSMU M M HPMU HPMU M HP MUS HSMU M M HPMU HPMU M HP MUS /16" HSMU M M HPMU HPMU M HP MUS /16" acrylic with fine detail HSMU M M HPMU HPMU M HP MUS HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP MDS MDS MDS Multi purpose, downcut, Multi purpose, downcut, Multi purpose, downcut, 1, 1/16" 2, 3/32" Bit Acrylic Down ut Single flute HSMU M M HPMU HPMU M HP MDS Multi purpose, downcut, Shank Tip AD S Flute Total 52 53

29 Up ut Bit Down ut bit HSMU = 1kW HPMU = 3kW Bits 6 mm special purpose milling bits * max RPM = 45 MultiUT = 1kW MultiUT = 1kW max RPM 45 MultiUT HP = 3kW / / Starter ollets part no. Bit part no. Bit name Description milling RPM This is our section for special purpose milling bits for engraving, high speed folding lines in AM (aluminum composite materials), outer radius, braiile mounting etc. See chart for details, milling thickness, max RPM, etc. HSMU M M HPMU HPMU M HP AUS up-cut, 3mm - 1/8" HSMU M M HPMU HPMU M HP AUS up-cut, - HSMU M M HPMU HPMU M HP AUS up-cut, - HSMU M M HPMU HPMU M HP AUS up-cut, 7mm - 9/32" HSMU M M HPMU HPMU M HP AUS up-cut, - HSMU M M HPMU HPMU M HP AUS up-cut, - engraved acrylic AM with v-notches milled wood radius detail HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP AUS AUS AUS AUS up-cut, up-cut, up-cut, up-cut, mm 1 Bit Engraving Bit Shape Shank Diameter EB06-40 Angle HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP ADS ADS down-cut, single flute bit. down-cut, single flute bit. 2, 3/32" 3mm - 1/8" * max RPM = 45 Folding Bits Engraving Bits Radius Bit Polishing Bit Braille Bit ompression Bit Straight ut Bit HSMU = 1kW HPMU = 3kW MultiUT Ibag = 1kW MultiUT = 1kW max RPM 45 MultiUT Kavo = 1kW MultiUT HP = 3kW HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP HSMU M M HPMU HPMU M HP ADS ADS ADS down-cut, single flute bit. down-cut, single flute bit. down-cut, single flute bit // Starter HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP ollets part no. Bit part no. Bit name Description EB06-40 (i-6630) EB06-60 (i-6660) Engraving bits for acrylics, other synthetic materials and wood. 40 degree. Produces a bottom groove of 0,4mm. Engraving bits for acrylics, other synthetic materials and wood. 60 degree. Produces a bottom groove of 0,4mm milling 4mm - 5/32 4mm - 5/32 RPM 54 55

30 // Starter ollets part no. Bit part no. Bit name Description milling RPM // Starter ollets part no. Bit part no. Bit name Description milling RPM HSMU M Ibag M M Kavo HPMU HPMU M HP EB06-46 Special purpose milling bit for making crease lines in polypropylene. 46 degree. Produce a bottom groove of 0,4mm. (ball nose bit) 4mm - 5/32 HSMU M Ibag M M Kavo HPMU HPMU M HP RBO Single flute 8 to 9/32" to HSMU M Ibag M M Kavo HPMU HPMU M HP EB06-73 Folding for aluminum composite material, max 3mm 3mm - 1/8 HSMU M ibag M M Kavo HPMU HPMU M HP RBO Radius Bit Outer, 6mm shaft radius 3, 12 to 14mm 15/32" to 1/2" HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP EB06-94 (i-3772) EB EB F EB F Hi-speed folding for aluminum composite material, 90 degree, max 4mm. Tip width 0,9mm produce a groove bottom of 1,8mm Hi-speed folding for aluminum composite material, 120 degree 2 flute. ball nose with tip dia. 1,8mm Hi-speed four flute folding for grey board and similar materials, max 5,2mm; this makes a 60 degree groove. Hi-speed four flute folding for grey board and similar materials, max 3mm; this makes a 90 degree groove. 4mm - 5/32 4mm - 5/32 5,2mm 1/5 3mm - 1/8 HSMU M ibag M M Kavo HPMU HPMU M HP HSMU M ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP Monocrystalline diamond polish Polycrystalline Daimond polishing bit 14mm BRAILLE BRAILLE For polishing edges of acrylics and similar materials. For polishing edges of acrylics and similar materials. Drilling bit for Braille. For drilling in acrylic, P, etc. Shaft 6mm,Tip : 1,5 (0,0610 Inch) Workstogether with the Braille. Drilling bit for Braille. For use in harder materials like Aluminum, AM etc. Tip : 1,56mm (0,0615 Inch) Works together with the Braille. - 3/16 pr pass 13mm - 1/2 pr pass 3mm - 1/8 3mm - 1/ HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP EB F EB F RBO RBO RBO Hi-speed four flute folding for grey board and similar materials, max 1,7mm; this makes a 120 degree groove. five flute engraving bit for wood, MDF, hardboard, flooring etc Radius bit outer 6mm shaft, radius Single flute Single flute 1,7mm 11/16 0,3mm 4mm - 5/32 pr pass 4 to 6mm 5/32" to 1/4" 6 to 8mm 1/4" to 9/32" 40' HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP HSMU M Ibag M M Kavo HPMU HPMU M HP MS (i-9152) MS MS MSD (i-6432) This is a compression bit for smooth edges on both top and bottom liner. Acrylic, Polycarbonate, Sintra with two sided print laminate. This is a compression bit for smooth edges on both top and bottom liner, can handle materials as thin as 2mm This is a compression bit for smooth edges on both top and bottom liner, can handle materials as thin as 2mm Gatorplast, Ultraboard, Kappa with direct print or blank 22mm mm

31 Accessories accessories * max RPM = 45 MultiUT Ibag = 1kW MultiUT Kavo = 1kW MultiUT HP = 3kW HSMU = 1kW MultiUT = 1kW max RPM 45 HPMU = 3kW accessories include adjustment sleeves, replacement chucks and maintenance items for the Kongsberg / and //. See the chart for descriptions and machine compatibility. // Starter Part no. Part name Description Adjustment sleeves M Ibag M M Kavo Adjustment sleeve Multiut 20mm Use in order to get the right milling depth when changing bit. M HP M Ibag M M Kavo Adjustment sleeve Multiut 28mm Use in order to get the right milling depth when changing bit M HP Dummy bits MultiUT head HSMU M Ibag M HPMU HPMU M HP Dummy router bit 3mm L40 placed in chuck when milling spindle is not in use HSMU M Ibag M M Kavo Dummy router bit 6mm L40 placed in chuck when milling spindle is not in use HPMU HPMU M HP HPMU HSMU HPMU M Dummy router bit 8mm L40 placed in chuck when milling spindle is not in use HSMU M Ibag M M Kavo Dummy router bit 1/4 L40 placed in chuck when milling spindle is not in use HPMU HPMU M HP Replacement chucks / collets for 3 kw Ibag HPMU HPMU mm replacement chuck HPMU HPMU M HP HPMU HPMU M HP mm replacement chuck 3mm replacement chuck 58 59

32 // Starter Part no. Part name Description Accessories Drawing s HSMU M Ibag M mm replacement chuck Replacement chucks / collets for 1 kw Ibag This is our section for drawing s, including fiber tip pens, liquid pen inserts and ball point pen refills. HSMU M Ibag M mm replacement chuck Replacement chucks / collets for 1 kw Kavo M Kavo mm replacement chuck huck maintenance kit M Ibag M M Kavo huck maintenance kit Multiut ( / ) M HP pen plot pen plot HPMU HSMU HPMU huck maintenance kit Replacement plastic bags for acuum cleaner acuum cleaner 75l (industrial) Plastic bags for ac.leaner 75L tank (50pcs) acuum cleaner Dolphin Plastic bags vac. cleaner Dolphin (50pcs) acuum cleaner TB Esko Plastic bags for vac. vleaner TB Esko. (50pcs) 60 61

33 Drawing s rease Wheels 15 mm crease wheels E Tool insert/unit Pen part no. Pen name Description Pens for drawing or marking on different materials 15 mm crease wheels provide excellent performance when creasing thin materials such as folding carton and paper. Fibretip pen Ø14 mm multifunction unit Fibretip N/A PEN-FP317 For drawing on materials such as clear vinyl, which normally cannot be marked with ballpoint or liquid ink pens. Fiber tip pens, Lumocolor 317 WP6 (set of 8). Line thickness: medium 1.0 mm Fibretip pen Ø14 mm multifunction unit Fibretip N/A PEN-FP318 For drawing on materials such as clear vinyl, which normally cannot be marked with ballpoint or liquid ink pens, Fiber tip pens, Lumocolor 318 WP6 (set of 8). Line thickness: fine 0.6 mm Liquid ink Ø14 mm multifunction unit PEN-LP164 Liquid ink pen insert. 0.3 black. For use with Liquid Ink Tool. Ball point pen Ø14 mm multifunction unit Ball point pen Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP PEN-BP102 Medium line ball point pen refill, black. for high-speed plots on paper, Mylar foil or directly onto dieboard Medium line ball point pen refill, blue for high-speed plots on paper, Mylar foil or directly onto dieboard folded carton package paper tent sign Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP103 Medium line ball point pen refill, red for high-speed plots on paper, Mylar foil or directly onto dieboard Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP104 Medium line ball point pen refill, green for high-speed plots on paper, Mylar foil or directly onto dieboard Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP201 Bold line ball point pen refill, black for highspeed plots on paper, Mylar foil or directly onto dieboard Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP202 Bold line ball point pen refill, blue for highspeed plots on paper, Mylar foil or directly onto dieboard Ball point pen Ø14 mm multifunction unit Ball point pen Ball point pen Ø14 mm multifunction unit Ball point pen PEN-BP PEN-BP204 Bold line ball point pen refill, red for highspeed plots on paper, Mylar foil or directly onto dieboard Bold line ball point pen refill, green for high-speed plots on paper, Mylar foil or directly onto dieboard 62 63

34 E Tool insert Wheel part no. Wheel name Description rease Wheels 26 mm crease wheels rease E rease 1 n/a rease wheel Ø15 1 Point rease Wheel - 1 dia - 1-point 26 mm crease wheels provide excellent performance when creasing thick carton and thin corrugated boards rease E rease wheel Ø Point rease Wheel - 1 dia point rease 1 n/a rease E rease wheel Ø15 2 Point rease Wheel - 1 dia - 2-point rease 1 n/a rease E rease wheel Ø15 3 Point rease Wheel - 1 dia - 3-point rease 1 n/a rease E rease wheel Ø15 4 Point rease Wheel - 1 dia - 4-point folded corrugated plastic sign creased and folded corrugated cases rease 1 n/a rease E rease 1 n/a rease wheel Ø15 1 mm spacing rease Wheel - 1 dia double edge 1mm spacing rease E rease 1 n/a rease wheel Ø15 1,2 spacing rease Wheel - 1 dia double edge 1,2 spacing rease E rease 1 n/a rease wheel Ø15 1,4mm spacing rease Wheel - 1 dia double edge 1,4mm spacing rease E rease 1 n/a rease wheel Ø15 1,8mm spacing rease Wheel - 1 dia double edge 1,8mm spacing rease E rease 1 n/a rease wheel Ø15 2,2mm spacing rease Wheel - 1 dia double edge 2,2mm spacing 64 65

35 rease Wheels E Tool insert Wheel part no. Wheel name Description E Tool insert Wheel part no. Wheel name Description rease E rease 26mm n/a rease wheel Ø26 1 Point rease Wheel - 26mm dia - 1-point rease E rease 26mm n/a rease wheel Ø26 0,6mm spacing rease Wheel - 26mm dia double edge 0,6mm spacing rease E rease 26mm n/a rease wheel Ø26 2 Point rease Wheel - 26mm dia - 2-point rease E rease 26mm n/a rease wheel Ø26 Triple wall rease Wheel - 26mm triple wall rease E rease wheel Ø26 3 Point rease Wheel - 26mm dia - 3-point rease E rease wheel Ø26 rush rease Wheel - 26mm crush R=15 rease 26mm n/a rease 26mm n/a rease E rease wheel Ø26 4 Point rease Wheel - 23mm dia - 4-point rease 26mm n/a rease E rease wheel Ø26 4 Point rease Wheel - 26mm dia - 6-point rease 26mm n/a rease E rease wheel Ø26 8 Point rease Wheel - 26mm dia 8-point rease 26mm n/a rease E rease wheel Ø26 10 Point rease Wheel - 26mm dia 10-point rease 26mm n/a rease E rease wheel Ø15 12 Point rease Wheel - 26mm dia 12-point rease 26mm n/a rease E rease 26mm n/a rease wheel Ø15 14 Point rease Wheel - 26mm dia 14-point 66 67

36 rease Wheels 60 mm crease wheels Tool insert / holder Perf wheel holder Wheel part no. Wheel name Description 60 mm crease wheels The 60 mm crease for corrugated board offers improved crease quality over smaller wheel s. The increased frontal area (see sketch) allows going deeper into the board without cracking the liner, which is especially important for material with high recycle content. All head insert positions HD position All head insert positions HD position rease Ø mm rease wheel holder rease Ø mm rease wheel holder N/A N/A rease wheel Ø60 6 pont rease wheel Ø60 4 pont rease wheel - 60mm dia - 6-point rease wheel - 60mm dia - 4-point The comes with three different crease wheels; a 4-point wheel suitable for E- and other microflutes, a 6-point wheel suitable for B- and -flute, and a U-shaped wheel for double wall corrugated. All head insert positions HD position rease Ø mm rease wheel holder N/A rease wheel Ø60 U shape rease wheel - 60mm dia - U shape 60 mm perforation s Due to the large the wheel must be attached to the after it has been mounted in the head. The wheel easily snaps in place without any auxiliary requirements. All head insert positions HD position rease Ø mm rease wheel holder N/A Perforation wheel holder Special wheel holder for fixing the perforation wheels All head insert positions rease Ø HD position 60mm rease wheel holder Perforation wheel 3 x 3 mm Makes perforation lines with 3mm cut and 3mm space All head insert positions rease Ø corrugated shipping packages corrugated produce containers HD position 60mm rease wheel holder Perforation wheel 5 x 5 mm Makes perforation lines with cut and space All head insert positions rease Ø HD position All head insert positions HD position 60mm rease wheel holder rease Ø mm rease wheel holder Perforation wheel 5 x 7 mm Perforation wheel 10 x 10 mm Makes perforation lines with 7mm cut and space Makes perforation lines with cut and space 68 69

37 rease Wheels 150 mm crease wheels and crease blades E Tool insert Wheel part no. Wheel name Description 150 mm crease wheels 150 mm crease wheels provide excellent performance when creasing thick corrugated boards, including doulble and triple wall corrugated. n/a rease wheel Ø150 4 Point rease Wheel - 150mm dia - 4-point The big crease wheel positions on the /// (PowerHead) and () has the equivalent of 50 kg [110 lb.] of down-pressure, which is 2½ times more than the downpressure of the conventional stations. The additional pressure, combined with the large frontal area of the big wheel enables excellent crease quality in heavy-duty corrugated board and even permits creasing board with high recycle content without breaking the liner. n/a n/a rease wheel Ø150 6 Point rease wheel Ø150 6 Point 6 degrees rease Wheel - 150mm dia - 6-point rease Wheel - 150mm dia - 6-point 6 degrees rease blades create superior creases in plastics where wheels are less effective. n/a rease wheel Ø150 U shape rease Wheel - 150mm dia - U shape n/a rease wheel Ø150 shape rease Wheel - 150mm dia - shape E Tool insert Wheel part no. Wheel name Description rease blades 47 mm Static knife double edge n/a rease - 0. For thin, synthetic material such as polypropylene (PP) and polyethylene (PE). triple wall corrugated package creased thin plastics Static knife double edge n/a rease - 1mm For thin, synthetic material such as polypropylene (PP) and polyethylene (PE). rease blades 25 mm Hi Force knife rease - 0. half For thin, synthetic material such as polypropylene (PP) and polyethylene (PE). Hi Force knife rease - 1mm half For thin, synthetic material such as polypropylene (PP) and polyethylene (PE). RM Knife n/a RM Knife n/a rease 0, for RM knife rease 1mm for RM knife For thin, synthetic material such as polypropylene (PP) and polyethylene (PE). For thin, synthetic material such as polypropylene (PP) and polyethylene (PE)