IMPORTANT SAFETY INSTRUCTIONS:

Transcription

1 Online: PRODUCT NAME: MR Geometric Chandelier ITEM NUMBER: LC971 DIMENSIONS OF ITEM ASSEMBLED: FLUSH- 36 H x 42 W x 30 1/2 D HANGING- 96 H x 42 W x 30 1/2 D HANGING FIXTURE: FLUSH FIXTURE: IMPORTANT SAFETY INSTRUCTIONS: -We strongly recommend that a professional electrician install all direct wire fixtures. -These Assembly Instructions are provided for your safety. It is important that they are read carefully and completely before assembling this Fixture. -This product must be installed with the applicable installation code by a person familiar with the construction and operation of the product. -This Fixture has been rated for up to 60 Watt MAX Type B Candelabra Bulb (NOT Included). -Before starting installation of this Fixture or the removal of a previous Fixture, disconnect the power by turning off the circuit breaker or removing the fuse from the fuse box. WARNING: -Deviation from the Assembly Instructions may result in a risk of fire or electric shock. -To reduce risk of fire, electrical shock, or personal injury, always turn off Fixture and allow it to cool prior to replacing the bulb. -Do not touch the bulb when the Fixture is turned on. Do not look directly at the lit bulb. -Keep flammable material away from the lit bulb. PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. Page 1 of 8

2 NOTE: Remove all parts and hardware from the box along with any plastic protective packaging and carefully lay all the parts out on a clean, flat surface. DO NOT discard any contents until after assembly and installation is complete to avoid accidentally discarding small parts or hardware. Parts Recommended Location for Use: Dry Indoor Environment Assembly Time: 30 Minutes People Required: 2 or more People Fixture Body (A) Tools Required: Screwdriver, Wire Strippers, Wire Cutters, Electrical Tape, Wrench PARTS Check to make sure you have the following: INCLUDED: NOT INCLUDED: 3- Wire Connectors (D) 6-60 Watt Max Type B Candelabra Bulbs 1- Fixture Body (A) (A1)- Safety Cable 2- Outlet Box Mounting Screws (B) 3- Long Rod (G) 1- Canopy (E) 2- Short Rod (H) 1- Mounting Strap 2- Mounting Screws (F) NOTE: The Mounting Strap comes attached to the Fixture Body. Page 2 of 8

3 FOR HANGING FIXTURE: (For Flush Mount, See Page 6) (H) (G) STEP 1: Thread the wires from the Fixture Body (A) through the desired number of Long & Short Extension Rods (G & H). Secure the Rods to the Fixture Body or other Rods by screwing in the Rods. (A) STEP 2: Thread the wires through the Canopy (E). Secure the Canopy to the Last Rod (G or H) by screwing the components together. (E) (G, H) Page 3 of 8

4 STEP 3: Make sure the power is off, then secure the Mounting Strap to the Outlet Box with the Outlet Box Mounting Screws (B). Tighten until snug. (B) STEP 4: Attach the Canopy (E) to the Mounting Strap using the Safety Cables (A1) that are attached to the top of the Canopy. (A1) STEP 5: Wrap the Ground Wire from the Fixture around the Ground Screw on the Mounting Strap. Attach the Power Supply Wires to the Fixture Wires by connecting Black to Black (or Smooth) and White to White (or Ribbed). Cover the connections using the Wire Connectors (D). NOTE: Black Wire inside the Outlet Box may be smooth. White Wire inside the Outlet Box may be ribbed. (D) (E) WHITE OR RIBBED FROM HOUSE WHITE OR RIBBED FROM FIXTURE BLACK OR SMOOTH FROM HOUSE BLACK OR SMOOTH FROM FIXTURE Online: Page 4 of 8

5 STEP 6: Place the Canopy (E) over the Mounting Strap. Using a screwdriver, thread the Mounting Screws (F) through the Canopy and into the mounting holes on the tabs on the Mounting Strap. Tighten until snug. (F) (E) STEP 7: Screw in the Bulbs. This Fixture has been rated for up to 60 Watt MAX Type B Candelabra Bulbs. (Not Included) STEP 8: Connect breaker and turn on Light. Cleaning & Care: To clean, wipe the Fixture with a soft, dry cloth. Avoid the use of harsh or abrasive chemicals as they may damage the finish. Online: Page 5 of 8

6 FOR FLUSH MOUNT: NOTE: This Fixture is not intended for slopped ceilings and cannot pivot. We strongly recommend that a professional electrician install Geometric Chandelier. STEP 1: A) Remove the Canopy (E) and all 5 Rods (H,G) from the Fixture cords if previously installed. B) Remove the Mounting Screws from Canopy 2 in order to access the inside of Canopy 2. C) Separate the Flat Cover from the Rod by loosening the Connector. D) Cut the extra wires. DO NOT cut the Short Safety Wire out of Canopy 2. Be sure to leave at least 1-2 feet of wire attached to Canopy 2 in order to attach to the Outlet Box. Use wire strippers to prepare the ends of the 2 wires so there is about 1/2 exposed wire for the plastic wire connectors. A) C) Connector Flat cover Short Safety Wire (E) (H) (G) Rod B) Mounting Screw Canopy 2 Page 6 of 8

7 STEP 2: Make sure the power is off, then secure the Mounting Strap to the Outlet Box with the Outlet Box Mounting Screws (B). Tighten until snug. (B) STEP 3: Attach the Canopy (A) to the Mounting Strap using the Safety Cables (A1) that are attached to the top of the Canopy. (A1) STEP 4: Wrap the Ground Wire from the Fixture around the Ground Screw on the Mounting Strap. Attach the Power Supply Wires to the Fixture Wires by connecting Black to Black (or Smooth) and White to White (or Ribbed). Cover the connections using the Wire Connectors (D). NOTE: Black Wire inside the Outlet Box may be smooth. White Wire inside the Outlet Box may be ribbed. (A) (D) WHITE OR RIBBED FROM HOUSE WHITE OR RIBBED FROM FIXTURE BLACK OR SMOOTH FROM HOUSE BLACK OR SMOOTH FROM FIXTURE Online: Page 7 of 8

8 STEP 5: Place the Canopy (A) over the Mounting Strap. Using a screwdriver, thread the Mounting Screws (F) through the Canopy and into the mounting holes on the tabs on the Mounting Strap. Tighten until snug. (F) (A) STEP 6: Screw in the Bulbs. This Fixture has been rated for up to 60 Watt MAX Type B Candelabra Bulbs. (Not Included) STEP 7: Connect breaker and turn on Light. Cleaning & Care: To clean, wipe the Fixture with a soft, dry cloth. Avoid the use of harsh or abrasive chemicals as they may damage the finish. Online: Page 8 of 8