just in place CAR PORT 3/5 assembly instructions

Size: px

Start display at page:

Download "just in place CAR PORT 3/5 assembly instructions"

Hope Cain
5 years ago
Views:

1 just in place CAR PORT 3/5 assembly instructions 1

2 Parts List Beam 13/13cm L-260cm X4 Pillars 13/13cm L-200cm X6 ARCH PANEL X18 Bolt 5/16X11/4 washer& nuts 0 Wood screw 30mm X96 Beam 7/13cm L-377cm Bolt 5/16X3/4 washer& nuts X400 Reinforcement angle X8 Self drilling screws with washer gasket Rubber caulk X12m Wood screw 80mm 8 Anchoring bolts 5/16 X12 label base X1 DIUK GROUP DIUK ENERGY Torx screw 250mm CURVED ANGLE 8 L-218cm X4 Roof connector X18 Black base X6 DIUK ARCHES logo X1 Tools Required Hammer Wrench Drill Gloves Pencil Ratchet crowbar Measuring tape Square Screw driver Level Hammer drill 11mm 2 Ladder

3 General Guidelines: 1.he existing Carport parts with metal edges, care should be taken when handling these parts. 2.While assemble Carport and / or maintenance work Wear work gloves, goggles, long-sleeved shirts. 3.Do not assemble the Carport while there is currently strong winds and / or very low temperatures. 4.Check occasionally that the screws securely fastened. 5.Please choose carefully the mounting location before beginning assembly, the surface should be straight,it is recommended to assemble the Carport on a concrete floor. 6.Review all instructions before you begin, continue to refer to the provisions during the assembly. Make sure the following the steps thoroughly. (Before mounting) 7.In order to enable easy assembly, please make sure that there is enough space around the location for the Carport 8.The actions performed and the required parts dashed red circle, and \ or close-up, Please have the pieces that appear in bold in advance at the beginning of each stage. Care and Safety: 1.It is very important to assemble all the pieces according to the instructions. Do not skip any steps. 2.Please check with local authorities if there is the necessary approvals for the construction of the Carport. 3.Check the overhang from time to time to ensure its stability.. Wearing goggles and always follow the manufacturer's instructions when using power tools. 4.Flush the carport inventions using a garden hose or a mild detergent solution. 5.Do not stand on the roof of the Carport. 6.The overhang is designed for roofing only and not intended to be used for housing. 7.Do not store next to the wooden rafters of the Carport hot items such as grills / burners and the like used recently. 8.Do not lean on the beams Carport abnormally heavy objects. 9.Despite the changing wind direction, this is an important factor that must be included in determining the location of your awning, so you should generally reduce the exposure of the Carport spirit. 10.Please check back periodically that screws securely fastened. 11.Keep roof clean of snow and leaves. Large amounts of snow on the ceiling of the shed might not be safe to enter. 12.The ceiling can carry up to 100 kg of snow per square meter 13.The Carport Stable in wind loads at maximum speed of 100 mph/ 160 kmh. Car port dimensions 407cm 574cm 272cm 534cm 355cm 3

4 Site selection 1.the site shulde be flat (Concrete Recommended) 2.assembly process need free space. 1 Side erection Pillars 13/13cm L-200cm X3 Square Beam 13/13cm L-260cm 90 A X4 C B 4

5 2 Side erection Reinforcement angle Square Wood screw 80mm X4 X Side erection Pillars 13/13cm L-200cm X3 Beam 13/13cm L-260cm Reinforcement angle Torx screw 250mm X6 Wood screw 80mm X4 Square X4 90 A C B 5 D

6 4 Placing the car port Rope Pencil Measuring tape stretched two perpendicular and straight lines at loction. 90 m xxxc 1.place first port side on two line. 2.Measure beam 7/13 XXX = actualsize 3.drow parll line XXXcm from first line like figure place second port side on parll line. 2.Measure the diagonals length needs to be equal. 6

7 5 Fixing pillar base Black base X6 Drill 11 mm Anchoring bolts 5/16 X12 Wrench Pencil Hammer Hammer drill 11mm X6 90 A B D C 7 E

8 6 Side erection 7 Side erection Wood screw 80mm X6 Level X6 8 Square

9 8 Side erection Level Wood screw 80mm X6 Square X6 9 Side erection Wood screw 30mm 4 4 9

10 10 Front beam Beam 7/13cm X1 L-377cm Torx screw 250mm X6 Level front X6 10 Square

11 12 Front beam Wood screw 80mm X4 Level Reinforcement angle Square front X4 13 back beam Beam 7/13cm X1 L-377cm Reinforcement angle Wood screw 80mm X4 Wood screw 250mm X6 Square Level back X6 A 11 X4 B

12 14 Arches assembly Wood screw 30mm X8 Roof connector X8 15 Arches assembly Measuring tape Wood screw 30mm X m Roof connector X16 m X18 12

13 16 Arches assembly Bolt 5/16X3/4 with gasket X16 ARCH PANEL SEAALING TAPE Ratchet Wrench X16 A 17 B Arches assembly Ratchet Bolt 5/16X3/4 with gasket X4 Wrench X4 Bitte die Schrauben nicht anziehen!. A 13

14 18 Arches assembly Bolt 5/16X3/4 with gasket X42 Bolt 5/16X11/4 washer& nuts ARCH PANEL X1 SEAALING TAPE Wrench Bitte die Schrauben nicht anziehen!. B A A Ratchet B X16 C 14 2 D

15 19 Arches assembly Bolt 5/16X3/4 with gasket 94 ARCH PANEL X14 SEAALING TAPE Bolt 5/16X11/4 washer& nuts X14 A 8 Ratchet Wrench X14 B C X112 D X154 Bitte die Schrauben nicht anziehen! 20 Back curved angel assembly Curved angel X1 Ratchet Bolt 5/16X3/4 with gasket X8 Wrench X8 Bitte die Schrauben nicht anziehen!. 15

16 21 Back curved angel assembly Curved angel X1 Bolt 5/16X3/4 with gasket X8 Ratchet Bolt 5/16X11/4 washer& nuts Wrench Bitte die Schrauben nicht anziehen!. X8 A B 22 Front curved angel assembly Curved angel Bolt 5/16X3/4 with gasket X16 Ratchet Bolt 5/16X11/4 washer& nuts Wrench X16 Bitte die Schrauben nicht anziehen!. A 16 B

17 23 lable base assembly label base X1 Ratchet Self drilling screws Wrench A B DIUK GROUP 24 front magnet label assembly DIUK ARCHES DIUK ENERGY logo X1 P OU R G IUK D RGY K ENE DIU 17 DIUK ES ARCH

Pergola PR100N1. Assembly Instructions. Systems Trading Corporation Customer service: (877)

Pergola PR100N1. Assembly Instructions. Systems Trading Corporation Customer service: (877) FABRIC Pergola PR00N Assembly Instructions Systems Trading Corporation Customer service: (8)82 82 of 20 Introduction Thank you for purchasing the Pergola PR00N. When properly assembled and maintained,