O.D. Range. Part # O.D. Range. Part #
|
|
- Eleanore Dean
- 5 years ago
- Views:
Transcription
1 6 SKINNER SKINNER-SEAL BAND CLAMP MODEL BCEC Snap Band Clamp Sizes 1/2 through 8 in 3 or 6 widths. Also 2-8 in 9, 12 width. Hardware Torque Specifications for Band Clamps 3/8 Bolts 1/2 to 1 1/2 OD FT-LBS 1/2 Bolts up to OD FT-LBS 5/8 Bolts over 4.74 OD FT-LBS 3 WIDE - 2 bolts Size 6 WIDE - 2 bolts 1/ $ $ / $ $ $ $ / $ $ / $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ WIDE - 3 bolts Size 12 WIDE - 4 bolts $ $ $ $ $ $ $ $ $
2 SKINNER-SEAL SKINNER 7 BAND CLAMP MODEL BCFC Full Circle Band Clamp Model BCFC Full Circle Band Clamp design is similar to the above Model BCEC Band Clamp but features a full circle gasket for added reliability. Installation Procedure: Size 3 WIDE - 1 bolt 6 WIDE - 2 bolts 1/ $ / $ $ / $ / $ $ SNAP CLAMPS (BCEC) WRAP CLAMPS (BCFC)
3 8 SKINNER SKINNER-SEAL BAND CLAMP MODEL BCSB All Stainless Steel Single Band Sizes 2 through 12 in 7.5 or 12.5 widths. Also 6, 10, 15, 20, 24, 30 width psi psi psi psi psi psi psi 6 WIDE - 2 bolts Size 7-1/2 WIDE - 2 bolts $ $ 1.00 $ $ 1.00 $ 1.00 $ 1.00 $ WIDE - 3 bolts Size $ * * 12-1/2 WIDE - 3 bolts / *4 bolts $ REPAIR CLAMPS (BCSB) 2-12 ALL STAINLESS STEEL CIRCLE REPAIR CLAMPS
4 SKINNER-SEAL SKINNER 9 BAND CLAMP MODEL BCSB All Stainless Steel Single Band (continued) 15 WIDE - 4 bolts Size $ $ WIDE - 6 bolts WIDE - 7 bolts Size $ WIDE - 9 bolts $1, Model BC-SB all Stainless Steel Single Section Band Clamp design allows for quick one-man installation. Excellent design for applications on corrosive materials or on buried water mains where corrosive soil is present. Bolts fit into lugs without removing nuts. Installation Procedure: Hardware Torque Specifications for Band Clamps 3/8 Bolts 1/2 to 1 1/2 OD FT-LBS 1/2 Bolts up to OD FT-LBS 5/8 Bolts over 4.74 OD FT-LBS
5 10 SKINNER SKINNER-SEAL BAND CLAMP MODEL BCDB All Stainless Steel Double Band Nuts Steel widths Sizes 10 through 16 in 10 or 12.5 widths. Also 10, 15, 20, 24, 30 width psi psi psi psi psi psi psi 7-1/2 WIDE - 4 bolts Size * * * * 12-1/2 WIDE - 6 bolts / *8 bolts WIDE - 6 bolts Size WIDE - 8 bolts $.00 $
6 SKINNER-SEAL SKINNER 11 BAND CLAMP MODEL BCDB All Stainless Steel Double Band (continued) 20 WIDE - 12 bolts Size $ WIDE - 14 bolts WIDE - 18 bolts $.00 $ Model BC-DB all Stainless Steel Double Band Clamp design allows for quick one-man installation. Excellent design for applications on corrosive materials or on buried water mains where corrosive soil is present. Bolts fit into lugs without removing nuts. Installation Procedure: Hardware Torque Specifications for Band Clamps 3/8 Bolts 1/2 to 1 1/2 OD FT-LBS 1/2 Bolts up to OD FT-LBS 5/8 Bolts over 4.74 OD FT-LBS REPAIR CLAMPS (BCDB) 4-16 TWO SECTION WIDER RANGE ALL STAINLESS STEEL REPAIR CLAMPS
7 12 SKINNER SKINNER-SEAL BAND CLAMP MODEL BCTB All Stainless Steel Triple Band 18-8 type 304 stainless steel band 18-8 type 304 stainless steel nuts & bolts Gasket material is Buna-N rubber Side bars and lifter bar 188 stainless steel Temperature Rating: 250 F 12 1/2 WIDE - 12 bolts / *16 bolts 15 WIDE - 12 bolts / *16 bolts 20 WIDE - 18 bolts / *24 bolts Size $1, $1, $1, $1, $1, $2, $1, $1, $2, $1, $2, $3, $2, $2, $3, * $4, * $5, * $5, Size 24 WIDE - 21 bolts / *28 bolts 30 WIDE - 27 bolts / *36 bolts $2, $3, $2, $3, $2, $3, $4, $5, $5, $6, * $6, * $7,
8 SKINNER-SEAL SKINNER 13 BAND CLAMP MODEL BCTB All Stainless Steel Triple Band (continued) Model BC-TB all Stainless Steel Double Band Clamp design allows for quick one-man installation. Excellent design for applications on corrosive materials or on buried water mains where corrosive soil is present. Bolts fit into lugs without removing nuts. Installation Procedure: Thoroughly clean the damaged area with a wire brush. This will assure a bubble tight gasket seal. Back off the nuts to the ends of the bolt, but do not remove them. Separate the clamp halves. Center the clamp gasket over the area that needs repair. Make sure the gasket extends past damaged area. Relocate the bolt heads securely into their receiving lugs. Pressure test for leaks before leaving area. Hardware Torque Specifications for Band Clamps 3/8 Bolts 1/2 to 1 1/2 OD FT-LBS 1/2 Bolts up to OD FT-LBS 5/8 Bolts over 4.74 OD FT-LBS
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe INFORMATION The Stargrip Mechanical Joint Restraint System is a unique product with a proven design that provides an exceptional
More informationCastle Frame Assembly Table AT-8. Diagnostics Manual. Castle, Inc. Petaluma, CA
Castle Frame Assembly Table AT-8 Diagnostics Manual Castle, Inc. Petaluma, CA 800-282-8338 Solutions Index Adjusting the Tabletop.. 8.01 Adjusting the Fence... 8.02 Aligning the Arm... 8.10 Adjusting Bracket..
More informationREPAIR CLAMP PARTS H fax: MULTIPLIER
REPAIR CLAMP PARTS Part Number Component Description Model Number Product Size List Price Unit V001 Neoprene Sheet Gasket AS All Sizes Square Inch V002 Waffle Pattern Gasket (NBR) AS All Sizes Square Inch
More informationPipe Restraints and Adapter Flanges. Section U. For PVC, Ductile Iron and Steel Pipe. 09/2017 Web Revision
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section U 09/2017 Web Revision 11-29-17 Restraints and Adapter Flanges For PVC, Ductile Iron and Steel Contents Applications
More informationINSTRUCTIONS FOR AIRFLEX 36WCBEP/36WCSEP WEAR PLATE REPLACEMENT USING GASKET SEALING TAPE
INSTRUCTIONS FOR AIRFLEX 36WCBEP/36WCSEP WEAR PLATE REPLACEMENT USING GASKET SEALING TAPE The material included in this kit is to be used for WC styles of brakes that are designed or upgraded to the EP
More informationPipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
More information4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
More informationAF-4 Grooved Flange Adapter
SUBMITTAL INFORMATION PROJECT NAME: ENGINEER: CONTRACTOR: SPEC. SECTION: MEMBER FEATURES & ADVANTAGES Designed for connecting ANSI/AWWA C110/A21.10 and ASME/ANSI B16.1 Class 125/ flanged end components
More informationHose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
More informationINSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F
INSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F350 08-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard
More information12-16 Ft Wide Enclosure Assembly Guide
www.rmfiberglass.com 12-16 Ft Wide Enclosure Assembly Guide RM Products Ltd 1-800-363-0867 www.rmfiberglass.com Handling and Storage 2 P a g e Handling and Storage: 3 P a g e Before You Begin Contact RM
More informationMUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections
insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extention 2-3 Improved Fire Hydrant Inserting Extention
More informationVALVTECHNOLOGIES, INC. INSTALLATION, OPERATIONS & MAINTENANCE MANUAL STEAM CHOKE VALVES
VALVTECHNOLOGIES, INC. INSTALLATION, OPERATIONS & MAINTENANCE MANUAL STEAM CHOKE VALVES Page STEAM CHOKE VALVES The Valvtechnologies steam choke is designed for the harsh conditions associated with steam
More information.84M Ku-Band Rx/O Antenna System
4096-644 Revision A May 9, 2003 ASSEMBLY MANUAL.84M Ku-Band Rx/O Antenna System PRODELIN CORPORATION 1500 PRODELIN DRIVE NEWTON, NC 28658 .84M Ku-Band Rx/O Antenna System A ORIGINAL RELEASE 5/9/2003 A.Hahn
More informationSYGEF Standard SYGEF Plus PVDF Flanges
Installation Instructions 2009 Volume, Rev 02 PM451 SYGEF Standard SYGEF Plus PVDF Flanges Please read all instructions before attempting to install flanges. Introduction When to Use a Flange Flanges may
More informationAssmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable
More informationThe Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance
... g n ldi ng... e i W No hread ing! T oov o N Gr o N The Redi-Flange Method Redi-Flange is a method of joining valves, fi ttings and equipment with integral fl anged ends to plain-ended pipe, with all
More informationI-W07/W77. Couplings DETAIL A WARNING. Photo Showing Pipe with Weld Seam Ground 6 inches/152 mm Back from Pipe End and an AGS Groove
WARNING Read and understand all instructions before attempting to install any Victaulic piping products. These products must be used only on pipe that is prepared to Victaulic Advanced Groove System (AGS)
More informationInstalling a COMROD AS1R Whip Antenna with Anchor Post
Installing a COMROD AS1R Whip Antenna with Anchor Post IS10012 Issue 1.0...15 September 2010 Nautel Limited 10089 Peggy's Cove Road, Hackett's Cove, NS, Canada B3Z 3J4 T.877 6 nautel (628835) or +1.902.823.2233
More informationFIELD LOK 350. Gasket 4" 24" JOINT RESTRAINT NSF FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS. Certified to ANSI/NSF 61
4" 24" FIELD LOK 350 JOINT RESTRAINT Gasket FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 4" 24" FIELD LOK 350 Gasket 2 Table of Contents FIELD LOK 350 Gasket 3 Assembly 4 Alternative
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationHalsey Taylor Owners Manual
Halsey Taylor Owners Manual Wall Mount Steel Fountains ITALLER These series fountains are among the easiest to install Fountains on the market today. To assure you install these models easily and correctly,
More informationGUIDELINES FOR HINGED AND BOLTED MANWAY ASSEMBLY
GUIDELINES FOR HINGED AND BOLTED MANWAY ASSEMBLY Assembly Instructions for the Flammable Liquid Industry Published by: Renewable Fuels Association Authored by: Watco Compliance Services, VSP Technologies,
More informationINSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09
INSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert, left
More informationAir Hose Products.
Air Hose Products 1.1 Bulk Red Air Hose 1.2 Jackhammer Hose Assemblies 1.3 Air Tool Hose Assemblies 1.4 Hot Air Blower Hose 1.5 Yellow Wire Braid Air Hose Assemblies and Fittings 1.6 Air Hose Fittings
More informationUPPER DOOR KIT P/N APPLICATION BEFORE YOU BEGIN ITEMS MARKED (*) ARE INCLUDED IN HARDWARE KIT PN P/N Rev 01 07/14 Page 1 of 6
UPPER DOOR KIT P/N 2880609 APPLICATION RZR 900 BEFORE YOU BEGIN Read these instructions thoroughly and make sure all parts and tools are accounted for. Please retain these installation instructions for
More informationFigure 11 Flange Adapter and Back-Up Ring
Flange Adapters Standard back-up rings are Standard back-up rings are convoluted ductile iron with AWWA C207 150 lb drilling. One edge of the back-up ring bore must be radiused or chamfered. This edge
More informationTOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationAuto-Spreader Spreader HS10K Hydraulic Flange Spreader
Auto-Spreader Spreader HS10K Hydraulic Flange Spreader US Patent No. 5678293 Operation and Maintenance Manual Keep For Your Records Contents Operation...2 Maximum Spreader Extension...3 Safety Tips...4
More informationMUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections
insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extension 2-3 Improved Fire Hydrant Inserting Extension
More informationGENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST
GENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST 1a. PIPE (PVCO): P.W. Eagle 200 PSI in accordance with AWWA C909. Use class 200 unless otherwise approved. Water Pipe Main Diameter
More informationInstallation, Operation, Inspection and Maintenance Manual
Installation, Operation, Inspection and Maintenance Manual System: KTM 1 Table of Contents 1.0 Introduction... 2 1.1 Precautions... 2 1.2 Regulations... 2 1.3 Technical Specifications... 2 1.4 Required
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationTypical Group D Rear Acoustical Cover Installation
SERIES 60 SERVICE MANUAL 1. Gear Case Cover 5. Bolt 2. Gear Case 6. Acoustical Cover 3. Acoustical Cover Snap 7. Acoustical Cover 4. Acoustical Cover Clip 8. Nut Figure 1-179 Typical Group D Rear Acoustical
More informationMay 14, Installation Manual
May 14, 2012 Installation Manual Contents MAG TRACKER Components...1 Mount Installation...7 Module Installation & Grounding...11 Maintenance...14 Warranty......14 Contact Information......14 May 14, 2012
More informationNTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges
NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationPatented Rail-Free Mounting System for Composition/Asphalt Shingle Roofs
Quick Start Guide Patented Rail-Free Mounting System for Composition/Asphalt Shingle Roofs R ESPECT T HE R OOF Quick Rack Components & Tools Components are pre-assembled and ready for installation right
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationINSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only)
INSTALLATION MANUAL FRONT Level of Difficulty Moderate Product Photo (center section only) All hardware listed below will be provided with the bumpers center section. Additional hardware will be supplied
More informationPROCEDURE:INSTALLATION OF BOLTED AND THREADED CONNECTIONS. as a result of improper lifting technique.
RISK RANKING: LOW HAZARD ASSESSMENT: HAZARD 1. Improper use of tools or using faulty tools. 2. Physical strain. POTENTIAL EFFECTS 1. Worker could suffer personal injury if not using tools properly. 2.
More informationFree Standing Pedestal Mounting Installation Manual
Free Standing Pedestal Mounting Installation Manual Articulated Jib Crane KickLIFT Page 1 of 5 INSTALLATION GENERAL INSTALLATION INSTRUCTIONS All AIMCO lift assist equipment and associated tooling is assembled
More informationStudents will assemble and disassemble cast iron pipe and fittings according to provided specifications.
Plumber Description Students will assemble and disassemble cast iron pipe and fittings according to provided specifications. Lesson Outcomes The student will be able to: Assemble cast iron pipe and fittings
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe
ONE-LOK Series SLC/SLCE Restraint for AWWA Use the SIGMA ONE-LOK Series SLC/SLCE restraint for AWWA pipe at mechanical or push-on joint ductile iron fittings. The ONE-LOK Restraint Systems can successfully
More informationOTECO INC. MODEL ,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL
Page 1 of 7 OTECO INC. MODEL 45 4 5,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL Page 2 of 7 TABLE OF CONTENTS 1. Assembly Blowout 2. Repair Kit Contents & Technical Specifications 3. Disassembly
More informationGH BETTIS SERVICE INSTRUCTIONS DISASSEMBLY & REASSEMBLY FOR MODEL F10207 DOUBLE ACTING HYDRAULIC ACTUATOR
GH BETTIS SERVICE INSTRUCTIONS DISASSEMBLY & REASSEMBLY FOR MODEL F10207 DOUBLE ACTING HYDRAULIC ACTUATOR PART NUMBER: 074960 REVISION: "A" RELEASE DATE: NOVEMBER, 1991 Page 1 of 6 1.0 INTRODUCTION 1.1
More informationCUTTING THE PIPE: BLUE DUCT Pipe can be easily cut using a Circular Saw or Reciprocal Saw. Trim all edges as necessary.
Installation Instructions In the past it has been IMPOSSIBLE to install an air and water tight underground system. BLUE DUCT (AKDUCT ) has produced a user friendly system that will reduce the amount of
More information2-Inch Thermoplastic Dewatering Pumps Refer to pump manual for General Operating and Safety Instructions.
Specifications Information and Repair Parts Manual 3824-99, 3825-99 & 382A-99 Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationMECH-100: Fundamentals of Precision Maintenance
MECH-100: Fundamentals of Precision Maintenance Universal Technologies, Inc. Student Guide Page 1 Torquing Topic Goals... 3 Introduction... 4 JOINT PRELOAD... 4 BOLT PRELOAD... 6 PRELOAD SEQUENCING...
More informationKEEP YOUR RESOURCE MOVING.
LINER BOLTS KEEP YOUR RESOURCE MOVING. COLUMBUS McKINNON CORPORATION Leading the Industry Downtime in the grinding mill operation is caused by one of two things: regularly scheduled maintenance or unscheduled
More informationFOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS
JOINT RESTRAINT (4" - 24") Gasket FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Gasket 3 Assembly 4 Alternative Assembly Methods 7 ipe Diameters 8 Assembly
More information1. The electrodes are comprised of four main parts: the PEEK piece, glass rod, bolt and stainless steel rod.
Assembly of dual immersion corrosion cell electrode mount 1. The electrodes are comprised of four main parts: the PEEK piece, glass rod, bolt and stainless steel rod. Figure 1. From left: PEEK piece, glass
More informationSAFETY PRECAUTIONS GENERAL INFORMATION
Form No. 102831 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800)
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationUPPER DOOR KIT P/N
UPPER DOOR KIT P/N 2879946 Application RZR XP4 1000 Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these installation instructions
More informationSteep-Slope ApplicAtionS
Steep-Slope ApplicAtionS GreenFasten GF1 PRODUCT GUIDE Exploded Product View/B.O.M. 1 Installation Instructions 2 Cut Sheets 3 Specifications 4 Test Data 5 Price List 6 Exploded Product View, Bill of Materials
More informationInstallation Instructions
The IMS ETERNAL FIX PATENT PENDING Installation Instructions EPS recommends professional installation for the Eternal IMS Fix. Please take all precautionary safety measures. We also recommend putting the
More informationSS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationINSTALLATION INSTRUCTIONS
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: 17A110200MSS\17A110200MA MODULAR GRILL GUARD FOR NISSAN FRONTIER 05-10//PATHFINDER 05-07 1 guard, center section 1 brush guard, left side 1 brush guard,
More informationMAASS Model J and JC Style PITLESS ACCESSORY OPTIONS
MAASS Model J and JC Style PITLESS ACCESSORY OPTIONS MADE in the USA PA Option with #370 Pressure Relief Valve PA (PITLESS ACCESSORY) OPTION Now available for Maass 1 Model J or JC Style Adapters, a 1/2
More informationPO STYLE AIR CLUTCH INSTALLATION AND MAINTENANCE MANUAL
PO STYLE AIR CLUTCH INSTALLATION AND MAINTENANCE MANUAL P.O. Box 8148 Wichita Falls, Texas 76307 1600 Fisher Rd. Wichita Falls, Texas 76305 Phone: (940) 761-1971 Fax: (940) 761-1989 www.wptpower.com email:
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationINSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert,
More informationTHE SCOUT WOOD-DECK ANCHOR
THE SCOUT WOOD-DECK ANCHOR 1.95" SCOUT POOL LIFT (SOLD SEPARATELY) 6" 6" [356mm] 14" [152mm] 6" [406mm] 16" OC [368mm] 14 1/8" WOODEN OR SYNTHETIC DECKING BOLT COPPER BONDING-LUG (ANY OF FOUR CORNERS)
More informationFXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #
ZOMEWORKS FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER # 1 1011 Sawmill Road NW, PO Box 25805, Albuquerque, NM 87125 USA (505) 242-5354 / (800) 279-6342 / FAX (505) 243-5187 E-mail: zomework@zomeworks.com
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More information2. Install two guide studs, J 36107, to the gear case. See Figure
SERIES 60 SERVICE MANUAL 2. Install two guide studs, J 36107, to the gear case. See Figure 1-174. 1. Front Gear Case Cover 4. Locating Dowel (Round) 2. Front Engine Lift Bracket 5. Locating Dowel (Diamond)
More informationSpiderbeam Balun Construction Guide
BALUN CONSTRUCTION GUIDE Ver. 1.0 1 The components of the Balun Kit are in a plastic bag. Most of the components are inside the plastic case of the balun. The aluminum U-profile and the RG-142 Teflon Coax
More informationFAIRBANKS NIJHUIS 1590 SERIES SINGLE STAGE VERTICAL INLINE PUMP.
FAIRBANKS NIJHUIS 0 SERIES SINGLE STAGE VERTICAL INLINE PUMP www.fairbanksnijhuis.com FAIRBANKS NIJHUIS 0 Series Single Stage Vertical Inline Pump Capacities to 00 GPM (,00 m/hr) Heads to 0 Feet ( m) Temperatures
More informationWhat is a fastener? A device to locate or hold parts
What is a fastener? A device to locate or hold parts As a repair technician you will become skilled at removing, reconditioning, replacing, and installing fasteners. An important skill to learn is how
More information.98M Ku-BAND Rx/Tx ANTENNA SYSTEM
Revision C January 2, 2002 ASSEMBLY MANUAL ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 ANTENNA SYSTEM C Revised Series text B Revised Address 1/2/02 RAH A Revise and Update
More information1.8 METER SERIES 1194 ANTENNA SYSTEM
January 14, 2002 REVISION G ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1194 ANTENNA SYSTEM G Revise Address 1/14/02 F
More informationFASTENERS, MEASUREMENTS AND CONVERSIONS
FASTENERS, MEASUREMENTS AND CONVERSIONS Bolts, Nuts and Other Threaded Retainers Although there are a great variety of fasteners found in the modern car or truck, the most commonly used retainer is the
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationRiser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
More informationMTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationSAVVY OFF ROAD GAS TANK SKID INSTALLATION INSTRUCTIONS
It is best to work with a fuel tank that has the least amount of fuel in it as possible. Thank you for purchasing the best skid on the market. Please follow these instructions and your installation should
More informationIMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to Volant Performance STOP Please take time to read and understand
More informationAve Edmonton, AB Canada T6P 0E2 Ph: Fax: apachepipe.com world class world wide
PIG OPTIONS 7-1 Model BB Flat Model BB Pencil Model RB 6-14 Flat Model RB 16-48 Flat Model HDPE 3-16 Pencil Model RB 16-48 Pencil 7-2 Model XB Pencil Model XB Flat Model XB Nylon Model XB Cantilever Assembly
More informationTHIS SHOULD TWEAK YOUR IMAGINATION
10-27-05 THIS SHOULD TWEAK YOUR IMAGINATION SPECIFICATIONS FOR SINGLE ANTENNA MODEL NUMBER... 432EME-12 FREQUENCY... 430-436 MHz GAIN... 14.4 dbd FRONT TO BACK... 23 db VSWR... 1.2:1 TYPICAL BEAMWIDTH...
More information1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM
August12, 2003 ASSEMBLY MANUAL Revision E 1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM E Revised
More information1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM
August 21, 1997 Revision D ASSEMBLY MANUAL 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM PRODELIN CORPORATION 1700 NE CABLE DRIVE CONOVER, NC 28613-0368 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM D
More informationInstallation/Care/Use Manual Soft Sides Freeze Resistant Fountain
Installation/Care/Use Manual Soft Sides Freeze Resistant Fountain EDFP217FPC Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION.
More informationSupport@Powrkraft.com 8ga. @ 0ft, 6ga. @ 50ft, ga @ 00ft, 0ga @ 00ft 3-6 Model Number Motor Diameter* 65556 500W 0 Volt 0 / Most Wood 0 4 ton 30 PSI 3.7 qt. 37 0 97 lb. 6 0W (-3 ISO Viscosity) Hydraulic
More informationSTANDARD "T" HANDLE CLAMPS
STANDARD "T" HANDLE CLAMPS Standard "T" Handles 401 1" 405 2" 410 3" 420 6" 430 9" 440 12" Multi-purpose clamps combine the best features of ordinary "C" and parallel clamps. Free-floating jaws adjust
More informationPROFESSIONAL FLARING TOOL 001ERL 37 & ERL 37
PROFESSIONAL FLARING TOOL 001ERL 37 & 45 002ERL 37 001ERL shown here OWNER S MANUAL 199R11215 EDUCATIONAL TIPS Make sure the end of the tube is cut off square. Before flaring, make sure the die clamp is
More informationTEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER PART # 17FJ26MA
\ TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER 02-05 PART # 17FJ26MA NOTE: Please read this information before assembling. Complete step by step instruction sheets will be
More informationJoint Restraints/ Bell & Spigot Joint/ New & In-Service Installations (2" IPS PVC Pipe)
C 1 C 1.1 Joint Restraints/ Bell & Spigot Joint/ New & In-Service Installations (2" IPS PVC Pipe) Joint Restraints/ Bell & Spigot Joint/ New & In-Service Installations (AWWA C-900 PVC Pipe) C 1.1.1 Joint
More informationDirective Systems & Engineering 2702 Rodgers Terrace Haymarket, VA
Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA 20169 1628 www.directivesystems.com 703 754 3876 K1JX DESIGNED 6 ELEMENT 50 MHZ YAGI, DSEJX6 50 INTRODUCTION The Directive Systems DSEJX6-50
More informationCOYOTE. Product Guide VOLUME 1
COYOTE Product Guide VOLUME 1 CYLINDER HEAD STUD KITS The key to optimum combustion chamber sealing and long-term reliability, ARP head studs are the ideal replacement for factory TTY (Torque To Yield)
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationClamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationFord Couplings For Pipe And Tubing
Section J 6/2002 Ford Couplings For Pipe And Tubing The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More information