ASSEMBLY AND CARE INSTRUCTIONS CHEER FLOOR 147C/147CC
|
|
- Dennis Park
- 5 years ago
- Views:
Transcription
1 ASSEMBLY AND CARE INSTRUCTIONS VERSION: (Revised 10/17) CHEER FLOOR 147C/147CC SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview Road, Oro-Medonte Ontario, Canada L3V 0R4 Toll-Free: (800) Telephone: (705) Fax: (705) USA 3327 Rangers Road Lansing, MI Toll-Free: (800) Telephone: (517) Fax: (517)
2 Thank you for purchasing a 147C/147CC Cheer Floor from SPIETH America. We appreciate your business and value you as a customer! The 147C - 40' x 54' Cheer Floor is a Sprung Deck on which we install all of the springs for you. You just lay the floor in place and you are ready to tumble. The 147CC - 40' x 54' Cheer Floor is an Unsprung Deck. The Floor Panels are shipped with the springs unclipped from the plywood. This is saving you money by saving space when shipping. Not installing the springs also allows you to save money by installing the springs on site. Your Cheer Floor is constructed with the finest quality raw materials. We are sure you will be pleased with its quality, durability and performance. Please carefully read the following instructions before assembling and using your new equipment, as they pertain to the particular equipment you have purchased. The exclamation mark symbol when seen in this manual is used to indicate warnings or items that require special attention during the use or assembly of the apparatus. Assembly, set-up and adjustment of this equipment should only be undertaken by qualified persons. At no time should children or other unqualified persons undertake the assembly, set-up, installation or adjustment of this equipment. Page 2 of 8
3 1. Spring to Panel Assembly onto Bottom Board (for 147CC Only) 1.1. Tools requirement 1 Rubber Mallet 1.2. Springs installation The top cap is already installed and screwed to the bottom plywood panel. Use a rubber mallet to clip the spring into the top cap, and then clip the bottom cap to the spring using the same tool. Top cap is already installed and screwed Top cap is already installed and screwed Page 3 of 8
4 2. Floor, Diagrams and Drawings 2.1. Required Floor Space Be sure you will have enough room for the floor! Measure out the required floor space. The wooden floor panels will be 40 feet x 54 feet when assembled. If you are adding perimeter foam (SPIETH America #155C), then you will require an additional 1 foot on each side. Figure 1 - Perimeter Foam 155C 1 Foot Wide Page 4 of 8
5 BOTTOM PANEL LAYOUT 1 2 3T 3L 4 5'X5' CORNER BOTTOM PANEL QT'Y: 2 5'X5' ST'D. BOTTOM PANEL QT'Y: 78 4'X5' NARROW CORNER BOTTOM PANEL QT'Y: 1 4'X5' NARROW CORNER BOTTOM PANEL QT'Y: 1 4'X5' NARROW END BOTTOM PANEL QT'Y: 6 147C CHEER SPRING FLOOR - 40'X54' TOP PANEL LAYOUT VELCRO HOOK - BOTTOM SIDE T 8L 5' X 5' ST'D TOP SHEET QT'Y: ' X 5' EDGE TOP SHEET QT'Y: ' X 2.5' CORNER TOP SHEET QT'Y: 2 1.5' X 5' NARROW EDGE TOP SHEET QT'Y: 7 1.5' X 2.5' NARROW CORNER TOP SHEET QT'Y: 1 1.5' X 2.5' NARROW CORNER TOP SHEET QT'Y: 1 VELCRO PILE TABS ON TOP SIDE EDGES FOR PERIMETER FOAM ATTACHMENT. 147C CHEER SPRING FLOOR - 40'X54' Page 5 of 8
6 2.2. Bottom and Top Panels Assembly Bottom panel seam Bottom full panel (5 X5 ) with 25 springs Top full 5 X5 panel Top panel overlaps the seam of the bottom panels. Top corner panel Need a top half panel (2.5 x5 ) in order to cover the bottom panel. SPIETH America floors consist of Bottom Panels and Top Panels. The Bottom Panels have springs and the Top Panels do not. The Top Panels are used to overlap the seams of the bottom panels. Because the Top Panels need to overlap the bottom panels, it is necessary to create partial panels (e.g. Half Panels) so that the top can be completely covered (Please refer to the drawings on the previous page to see the layout of the 147C/147CC Cheer Floor). 1. Assemble bottom layer by laying out bottom panels one row at a time. Make sure that there are no gaps between the panels. 2. Assemble top layer by laying out top panels and overlapping the seams of the bottom panels (see image above). VELCRO HOOK TABS WILL BE TURNED DOWN, TO HOOK TO BOTTOM PANELS VELCRO PILE TABS. Check the rows for straightness. Always take your time in assembling the floor since fixing problems after the floor is assembled is difficult and may require complete disassembly of the floor. Page 6 of 8
7 2.3. Attaching floor perimeter (sold separately under SA Sport #155C) Using Velcro Pile Tabs on top side edges of the top panels and the straps provides with the foam set, attach the foam perimeter. Start at the corner as shown on page Laying Down Foam Backed Carpet 1. Lay the first roll of carpet onto the floor and line it up with the outside edges (Carpet is unrolled widthwise). There are 9 Rolls of Carpet, 6 Wide X 42 Long. 2. Lay down the next roll of carpet and GENTLY push it against the edge of the other carpet. Make sure the first roll of carpet doesn't move or you will have to line it up again. 3. Line up both ends of carpet so they are even. Check for gaps between carpet as well as straightness after each piece is layed. 4. Join carpet by running Velcro tape down the seam. Again, make sure there are no gaps. Layout and join the rolls of carpet one piece at a time. 5. Repeat steps 1 to 4 until all the carpet rolls are laid down and joined together. Page 7 of 8
8 3. SAFETY WARNING Any activity involving motion or height creates the possibility of serious injury including permanent paralysis and even death, from landing or falling on the neck, head, or other parts of the body. You assume a risk of serious injury in using this equipment. However, this risk can be reduced by strictly following these rules at all times. 1. Use this equipment only under the supervision of a trained and qualified instructor. 2. This equipment must be used only when protected by proper matting as recommended by the Federation of International Gymnasts (F.I.G.). If in doubt concerning proper matting, do not use this equipment. 3. This equipment must be used with proper spotting equipment and qualified spotters suitable to the activity or skill. Always consult an instructor. 4. Know your own limitations and the limitations of this equipment. Follow progressive learning techniques and always consult an instructor. 5. Always inspect this equipment for proper stability before each use. 6. Always inspect this equipment for loose fittings and parts. Replace any worn, defective or missing parts. 7. Always inspect this equipment for improper or unsafe installation. If in doubt, do not use this equipment. Page 8 of 8
anderson.com
124 SPACE MAXIMIZER Sales & Service Spieth Anderson International, Inc. Spieth Anderson U.S.A. Inc. Forestview Road, P.O. Box 40 4608-A Fairlane Avenue Orillia, Ontario Fort Worth, Texas Canada L3V 6H9
More informationASSEMBLY AND CARE INSTRUCTIONS CEILING HUNG RINGS 108
ASSEMBLY AND CARE INSTRUCTIONS VERSION: 8920071 (Revised 06/15) CEILING HUNG RINGS 108 SALES AND SERVICE sasportonline.com SA Sport Canada and International 135 Forestview Road, PO Box 40 Orillia, Ontario,
More informationASSEMBLY AND CARE INSTRUCTIONS
ASSEMBLY AND CARE INSTRUCTIONS COMPETITION CRANK BALANCE BEAM 5121-120 (16 ) & 5121-335 (12 ) VERSION: 8920028 (Revised 06/16) SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview
More informationASSEMBLY AND CARE INSTRUCTIONS JUST FOR KIDS 355
ASSEMBLY AND CARE INSTRUCTIONS VERSION: 8920100 (Revised 06/16) JUST FOR KIDS 355 SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview Road, PO Box 40 Orillia, Ontario, Canada L3V
More information121PB - PRO UNEVEN BARS
Sales & Service sasportonline.com Head Office 135 Forestview Road P.O. Box 40 Orillia, Ontario Canada L3V 6H9 Toll Free (800) 563-6479 Phone (705) 325-2274 Fax (705) 325-1485 USA Office 7879 Will Rogers
More informationAssemble and Adjustment Instructions and Flex Balance Beam and Crank Balance Beam
Sales & Service sasportonline.com Head Office 135 Forestview Road P.O. Box 40 Orillia, Ontario Canada L3V 6H9 Toll Free (800) 563-6479 Phone (705) 325-2274 Fax (705) 325-1485 USA Office 7879 Will Rogers
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More information108 - CEILING HUNG RINGS
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 4608 Fairlane Avenue P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76119 Canada L3V 6H9 Telephone: (705) 325-2274
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Instruction Sheet C-STAND 7100 Store these instructions in a safe place or with the enclosed maintenance checklist Take time to familiarize yourself with the use and maintenance
More informationPORTA TRAK OWNERS MANUAL
PORTA TRAK OWNERS MANUAL Table of Contents: I. Rail and Frame Parts List Please read the instructions thoroughly before setting up the Porta Trak. Carefully follow how to spring the bed step by step. II.
More informationINSTRUCTION BOOKLET #C20
INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO
More informationLINEAR BEARING SMITH MACHINE. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
DF4900 LINEAR BEARING SMITH MACHINE Assembly Manual (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationReady-To-Assemble VersaRail INSTALLATION INSTRUCTIONS
FREEDOM-WEB Ready-To-Assemble VersaRail INSTALLATION INSTRUCTIONS Read all instructions prior to installing product. Refer to manufacturers safety instructions when operating any tools. To register your
More informationSeries Assembly Instructions
ComforTrak TM Series Assembly Instructions EP-560, EP-860, EP-960 & EP-970 Models *Inversion Table images may vary slightly from your model. The EP-560 is shown here. BEFORE YOU BEGIN: Review all steps
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationSET-UP & MAINTENANCE GUIDE. DME Helical Gear Stack Mold Centering Devices
SET-UP & MAINTENANCE GUIDE DME SECTION A Safety Procedures Table of Contents Safety Procedures... 2-4 General Description... 5 Assembly and Initial Setup... 6 On-Site Setup and Adjustment... 7-9 Disassembly
More information(4pcs) (6pcs) B40 Long Curve (4pcs) E2 Corner (1pcs)
Catville TOWNHOME Model: #7235 (Leopard) Instructions online at www.prevuepet.com very helpful tips Loosely lay out all parts for each step. Slide tubes into fabric sleeves first then add connectors. Use
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS CTM-MS1 Flat Panel Display Mount (26 to 37 ) NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More information2 Door Base Unit ASSEMBLY GUIDE. Page 1 of 9 28/04/2009 Revision 3. WARNING: Contains small parts, keep out of reach of children.
ASSEMBLY GUIDE 2 Door Base Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please contact 1800
More informationTITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF
TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF DXST10000 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More information1 Door Wall Unit ASSEMBLY GUIDE. Page 1 of 7 14/04/2009 Revision 3. WARNING: Contains small parts, keep out of reach of children.
ASSEMBLY GUIDE 1 Door Wall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please contact 1800
More informationEquilibrium. Conference Table. Installation Instruction. Revision B 11/07/16
Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete
More informationOctagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models
Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 04/29/09 Vinyl Gazebo Assembly
More informationTITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF
TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF DXST4500 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS TECHNICAL
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS For Wallbed models: Do-It-Yourself BOOKLET #C90 WARNING! ALL MURPY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationAquaGuard - Water Resistant Flooring Installation guidelines
AquaGuard - Water Resistant Flooring Installation guidelines Before You Start: Please read all the instructions before you begin the installation. Improper installation will void the warranty. Important
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationWILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount
WILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount For Wallbed models: Do-It-Yourself Insturction booklet C92 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS A CSW Industrials Company FGLP with Cast-In Frames FGLP-A, FGLP-C, FGLP-D IMPORTANT The following instructions are very important. Read them carefully, and be sure you understand
More informationStageTek Staging System
Owner s Manual StageTek Staging System CONTENTS Safety Precautions.................................2 Important User Information...........................2 Introduction.......................................3
More informationOctagon Vinyl Gazebo Assembly Instructions
Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 04/29/09 Vinyl Gazebo Assembly
More informationINSTRUCTION MANUAL. FOR Stainless Steel Solid Rivet Shelving MODELS COVERED: LWS-1836/1848/2436/2448
INSTRUCTION MANUAL FOR Stainless Steel Solid Rivet Shelving MODELS COVERED: LWS-1836/1848/2436/2448 VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586
More informationPOWER TOWER OWNER S. Item #1720
POWER TOWER OWNER S Item #1720 TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------- 2 IMPORTANT LABELS --------------------------------------------------------
More informationBeginning Level (9-11 Years)
OKLAHOMA COOPERATIVE EXTENSION SERVICE 4-H Fabrics & Fashions Construction Items Beginning Level (9-11 Years) Division of Agricultural Sciences and Natural Resources Oklahoma State University OKLAHOMA
More information1 Door Base Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.
Page 1 of 9 ASSEMBLY GUIDE 1 Door Base Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please
More informationEASY CLOSE WALK-THROUGH GATE
OWNER S MANUAL MODEL: 3030, 3036 EASY CLOSE WALK-THROUGH GATE WITH SMALL PET DOOR! READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. www.carlsonpetproducts.com Carlson
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationShop Style Miter Saw Stand Kit
Quality Power Tool Accessories OWNER S MANUAL Assembled Unit Shown Without Shelves & Wings Assembled With Shelves & Wings Shop Style Miter Saw Stand Kit Model 2850 IMPORTANT Read and understand all safety
More informationLifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
More informationMcCue Bumper Installation Instructions
McCue Bumper Installation Instructions McCue 8" Bumper Tools Required: Saw with 10-12" blade Tape measure Flat head screwdriver Phillips screw driver Pencil or chalk line Drill with Philips driver bit
More informationEXTRA TALL WALK-THROUGH GATE
OWNER S MANUAL MODEL: 0941, 0942 EXTRA TALL WALK-THROUGH GATE WITH SMALL PET DOOR! READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. www.carlsonpetproducts.com Carlson
More informationINSTALLATION MANUAL SFM3
INSTALLATION MANUAL SFM3 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM3.R0 Table of Contents WARNING STATEMENTS...- 3 - PARTS LIST...- 4 - INSTALLATION TOOLS...-
More informationEmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY
EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B
More information40"- 61" Electric Height Adjustable Desk Frame
40"- 61" Electric Height Adjustable Desk Frame Instruction Manual SKU: DESK-V102EW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
More informationw w w. U C S S P I R I T. c o m
est. 1967 GYMNASTICS EQUIPMENT 125 Series Mat, pg. 3 Folding Incline, pg 1 Rainbow Barrel, pg. 6 FEATURING OUR NEW TEAR DROP TRAINER! Page 2 MADE IN USA 8 0 0. 5 2 6. 4 8 5 6 w w w. U C S S P I R I T.
More informationModel: SS660-PT-R Stainless Steel Poly-Top Floor Scale Series. Installation, Set-Up and Operation Manual
SCALE WORKS, INC. Model: SS660-PT-R Stainless Steel Poly-Top Floor Scale Series (Remote Junction Box) Installation, Set-Up and Operation Manual Cambridge Scale Works, Inc. P.O. Box 670 Honey Brook, PA.
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More information2YEAR. Fit Series Assembly Instructions. Inversion Tables WA R R A N T Y
Fit Series Assembly Instructions Inversion Tables R TEETER HANG UPS 2YEAR WA R R A N T Y * Inversion Table images may vary slightly from your model. The Fit-100 is shown here. BEFORE YOU BEGIN: Review
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationElara NanoEdge Fixed Frame Screen User Guide
Elara NanoEdge Fixed Frame Screen User Guide INTRODUCTION INTRODUCTION WARNING This product may contain sharp edges, please handle with care. Protective gloves are recommended. A minimum of two people
More informationAssembly Instructions
18' W x 10' H or 12' H Peak Style Frame Assembly Assembly Instructions Before you start: 2+ individuals recommended for assembly, approximate time 3 hours. Recommended tools: Power Drill, Safety Glasses,
More informationMat Instructions: Rubber Hinge
P.O. Box 459 Rosemount, MN 55068 Tel: 651 423 1174 Toll Free: 800 824 3348 Fax: 651 423 1310 Toll Free 800 310 9853 Connecting Sections: REESE ENTERPRISES, INC. Mat Instructions: Rubber Hinge www.reeseusa.com
More informationfeatures and benefits: dimensions:
Hopup A variety of sizes, kits and options of Hopup displays are available. Hopup tension fabric displays are simple, versatile and can be set up in seconds. Hopups feature a lightweight, durable frame
More informationLAWN AND GARDEN GREENHOUSE
MODEL# OGAL-66 OGrow Walk-in 6' x ' LAWN AND GARDEN GREENHOUSE With Heavy Duty Aluminium Frame Let'sGrow Together! Thank you for purchasing the OGROW greenhouse Follow the assembly and safety instructions
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationLAWN AND GARDEN GREENHOUSE
MODELS# OG0AL8-BKE OGAL-8 OGrow Walk-in ' x 8' LAWN AND GARDEN GREENHOUSE With Heavy Duty Aluminium Frame MANUAL VERSION # Grow r! e h t e g To Let's Thank you for purchasing the OGROW greenhouse Follow
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. Instruction Sheet Wood Joist 2-1/2 Ft. Drop Ceiling
More informationP250A PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS
P250A PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS WARNING Read these instructions thoroughly before using this tool and keep it handy for reference. Printed in Canada v140, 08/15 PRIMATECH PNEUMATIC
More informationfeatures and benefits: dimensions: Hardware: Straight Frames:
Hopup A variety of sizes, kits and options of Hopup displays are available. Hopup tension fabric displays are simple, versatile and can be set up in seconds. Hopups feature a lightweight, durable frame
More informationGUARDRAIL ALUMINIUM SECURIGARD
GUARDRAIL ALUMINIUM SECURIGARD ZZNO041UK April 2018 REQUIRED TOOLS Metal shears ( to remove the pallet bindings) Metal saw/batterypowered grinder Mallet Tape measure Cord Screwdriver Rivet gun CAUTION:
More informationAssembly Instructions for Model: VMPR1
Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP
More informationDRAWer FORD RANGER IMPORTANT WARNING! SSDS201 / SSFR001. INSTALL TIME: 1 Hour. Thank you for purchasing a Front Runner Storage System.
DRAWer FORD RANGER SSDS201 / SSFR001 INSTALL TIME: 1 Hour Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System - SSDR010
More information6 Cub Pack Drawer IMPORTANT WARNING! INSTALL TIME: 45 mins SSAM014
6 Cub Pack Drawer SSAM014 INSTALL TIME: 45 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
More informationINSTALLATION GUIDE 8IWBM-EL. phone: (02) fax: (02)
INSTALLATION GUIDE 8IWBM-EL www.gilkon.com.au email: sales@gilkon.com.au phone: (02) 99140900 fax: (02) 99140901 CONTENTS 1. DISCLAIMER Page 2 2. WARNINGS & SAFETY INSTRUCTIONS Page 3 3. PACKAGE CONTENTS
More informationInstallation Instructions Please pass on to user
4740 Concept WS Bath:Layout 5/0/008 8:0 Page CONCEPT ACRYLIC WATERSAVING BATHS Installation Instructions Please pass on to user 4740 Concept WS Bath:Layout 5/0/008 8:0 Page CONCEPT USER GUIDE Thank you
More informationV00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type
More informationHands Free Safety Gate
Hands Free Safety Gate OWNER S MANUAL MODEL: 1705 READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. www.regalo-baby.com Regalo International, LLC. 3200 Corporate
More informationPATRIOT DOCKS ASSEMBLY INSTRUCTIONS
6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.
More informationMERRY GO ROUND ITEM NO: 8030
MERRY GO ROUND ITEM NO: 8030 OWNER S MANUAL CAUTION: This unit is designed to be used safely by up to 4 children between the ages of 3 years to 8 years old with a maximum weight of 00 pounds (45.4 kgs)
More informationFitSpine R.E.D. 5YEAR. Inversion Table Assembly Instructions WA R R A N T Y
R FitSpine R.E.D. Inversion Table Assembly Instructions TEETER HANG UPS 5YEAR WA R R A N T Y BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion
More informationTABLE MKI small with Basin and under rack brackets kit
TABLE MKI small with Basin and under rack brackets kit TBRA024 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO
More information8' x 7' Vinyl Storage Shed
8' x 7' Vinyl Storage Shed Model #S-8070-A Storage Shed Owner s Manual 8' x 7' (2.44m x 2.14m) PLEASE READ OWNER S MANUAL COMPLETELY BEFORE ASSEMBLING YOUR BUILDING. ALL STATED SIZES ARE NOMINAL DIMENSIONS.
More informationSTACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS
STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions
More informationBrute Full Rack shown with Hardwood Floor, Ramp, and Spotter Platforms.
Product Information Packet Brute Rack Floors & Lifting Platforms Product Part Numbers: 410581, 410582, 410584, 410585, 410586, 410742 410760, 410761, 410762 410763 Brute Full Rack shown with Hardwood Floor,
More informationADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Parts List Please read completely through the instructions and verify that all parts listed are present
More informationMedium Prone Stander. E940 Product Manual
Medium Prone Stander E940 Product Manual Contents Warnings and Important Information 3 Recommended Use 4 Checking your order 4 User and Item Dimensions 4 Mainboard 5 Abductors 6 Tray 8 Footboard 9 Operation
More informationPop-Out Slim Video Wall Mount
Installation Guide ADM-VWSP Pop-Out Slim Video Wall Mount CONTENTS Installation Safety Notes Page 2 Interface Adaptors Page 3 Installation Instructions Page 4 Installation Options Page 9 Alternative Mounting
More informationTUMBL TRAK OWNERS MANUAL
TUMBL TRAK OWNERS MANUAL Table of Contents: I. Assembly Instructions for the Tumbl Trak 1. Frame Assembly 2. Springing the Bed 3. Using The Spring Tool 4. Attaching the Frame Pads & End Caps A. After Assembly
More informationPORTA-DOCK, INC. AP17 APD DS 4 X 16 T12 AW17 CPD DS 4 X 16 T12
Page 1 of 7 PORTA-DOCK, INC. AP17 APD DS 4 X 16 T12 AW17 CPD DS 4 X 16 T12 *For Beige Decking Add the Letter B to Model* Thank you for purchasing out product! *Please read these instructions and follow
More informationMAINSTREET 36 INCH TABLE SOCCER
Mainstreet 36 Inch Table Soccer MAINSTREET 36 INCH TABLE SOCCER Replacement Parts Order direct at or call our Customer Service department at (800) 5-7593 8 am to 4:30 pm Central Standard Time September
More information#11179 Wellington ARBOR
#11179 Wellington ARBOR Assembly INSTRUCTIONS TOOLS NEEDED Tape Measure Variable Speed Drill with #2 Phillips Bit (recommended) or Phillips Screwdriver Hammer or Mallet ARBOR SIDE PANEL ASSEMBLY (Refer
More informationtable brackets for mki table incl latch TBRA020
table brackets for mki table incl latch TBRA020 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER
More information2 Door Tall/Split Unit
ASSEMBLY GUIDE 2 Door Tall/Split Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please contact
More informationJUDGE'S STAND INST TOOLS: Hammer, Tape Measure, Phillips Screwdriver, 7/16" Wrench, 1/2" Wrench, 9/16" Wrench X2
888--8. Check all parts against parts list to ensure that all parts and hardware are available to complete the installation. 0 0 900 JUDGE'S STAND TOOLS: Hammer, Tape Measure, Phillips Screwdriver, /"
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More informationQ-Zone Hoop-Frame. Assembly Instructions. Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8
Q-Zone Hoop-Frame Assembly Instructions Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8 Table of Contents Table of Contents... i Warranty... ii Parts List Box 1...iii Box 2...
More informationPrecut Wingola Kit Instructions
Precut Wingola Kit Instructions Below is the precut option. Battery compartment, Receiver and Servo Trays are cut for mini radio gear. This is the uncut version. It has the placement laid out for the radio,
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationPortable System Owners Manual
Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept
More information8X10 Breeze Pergola Assembly Manual Outdoor Living Today
8X10 Breeze Pergola Assembly Manual Outdoor Living Today Revision #11 Jan 18th, 2018 Note: Post Mounting Hardware is NOT included in this kit. Please confirm with your local building permit office to determine
More informationINSTALLATION INSTRUCTIONS
POST THIS WARNING IN A CONSPICUOUS PLACE, CLEARLY VISIBLE TO ALL STORE PERSONNEL Install all components according to installation instructions. READ BEFORE ASSEMBLING WARNING FOR YOUR SAFETY Installation
More informationINSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS
INSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS Important: Read all sections before you start Prior to installing railing, please consult local zoning laws in regards to load requirements
More informationPEDESTAL INSTALLATION. Guidelines for installing adjustable height pedestals
BASIC REQUIREMENTS Irrespective of the type of pavers or tiles that will be installed over pedestals, the following basic requirement must be met. Decks must be designed not to exceed the load capacity
More informationWoodTrac Direct Mount Ceiling System
WoodTrac Direct Mount Ceiling System Assembly Instructions All product is Class C rated and some product is available Class A rated. Check the ordering information to obtain the class rating for your product.
More informationReady-To-Assemble VersaRail INSTALLATION INSTRUCTIONS
Ready-To-Assemble VersaRail INSTALLATION INSTRUCTIONS Read all instructions prior to installing product. Refer to manufacturers safety instructions when operating any tools. To register your product, please
More informationVideo Wall Installation Instructions 2W X 3H, 3W X 3H
Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...
More informationIMPORTANT: Read all sections before you start
1 IMPORTANT: Read all sections before you start For the most up to date information please visit our website @ www.newtechwood.com Prior to installing the railing, please consult local zoning laws in regards
More information