Anchor type Base material Approvals Application. Lightweight concrete Aerated concrete. Uncracked concrete. Solid brick masonry
|
|
- Ferdinand Bryant
- 5 years ago
- Views:
Transcription
1 Anchor selector Anchor type Base Approvals Application Mechanical anchor systems Heavy duty anchors HDA-T/ -TR/TF/-P/-PR/-PF undercut anchor Anchor fastening for high loads e.g. in steel construction and plant construction HSL-3 heavy duty anchor Fastening heavy loads e.g. from columns, high racks, machines HSL-GR heavy duty anchor Fastening heavy loads Medium and light duty anchors HSC-A(R) /-I(R) safety anchor Safety relevant fastening at facades and ceilings where short embedment depth is required HST/-R/-HCR stud anchor Fastening through in place parts e.g. angles, tracks, channels, wooden beams, etc. HSA/-R/-R2/-F stud anchor Fastening through in place parts like wooden beams, metal sections, columns, brackets, etc. HSV stud anchor Fastening through in place parts HLC sleeve anchor Temporary fastenings in concrete (e.g. formwork), fastening in base of low density = very suitable = may be suitable per application = technical report redundant fastening 8
2 Advantages Drill bit diameter resp. anchor size Steel, galvanised Steel, sheradised, hot dipped galv. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Automatic undercutting High load capacity Approved for all dynamic loads mm M10 M20 72 Integrated plastic section to telescope and pull down tightly The bolt can be retorqued Integrated plastic section to telescope and pull down tightly The bolt can be retorqued mm M8 M mm M8 M Automatic undercutting Small edge distances and spacings Small setting depth Quick and simple setting operation Setting mark Safety wedge for certain follow up expansion Three setting depths Setting mark Extremely ductile steel for high bending capacity Quick and simple setting operation Short setting and removing operation Good loads in green concrete Bridging of gaps mm M6 M mm M8 M mm M8 M mm M8 M16 6,5 20 mm M5 M
3 Anchor type Base Approval Application Medium and light duty anchors HAM hard sleeve anchor Secure fastenings in various base s HUS-HR screw anchor, stainless steel Fastening channels, brackets, racks, seating HUS screw anchor, carbon steel Fastening channels, brackets, racks, seating HUS- 6 screw anchor, redundant fastening Fastening channels, brackets, racks, seating HUS 6 / HUS-S 6 screw anchor Fastening light channels, brackets, interior panelling or cladding HKD push-in anchor Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings HKV push-in anchor Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings HUD-1 universal anchor Various applications HUD-L universal anchor Various applications = very suitable = may be suitable per application = technical report redundant fastening 10
4 Advantages Drill bit diameter resp. anchor size Steel, galvanised Steel, sheradised, hot dipped galv. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Wings to prevent spinning in the bore hole Plastic cap in cone to prevent dust entrance mm Thread: M6 M Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver 6 14 mm 8 14 mm 6 mm Screw driven straight into base Small drill bit diameter Matched system of screw anchor and screw driver Visual verification of full expansion Small setting depth Visual verification of full expansion Small setting depth Fast setting Flexibility of screw length An anchor for every base Fast setting Flexibility of screw length An anchor for every base 6 mm 8 25 mm M6 M mm M6 M mm 6 10 mm
5 Anchor type Base Approvals Application Medium and light duty anchors HLD light duty anchor Fastenings to weak with cavities HRD-U/-S frame anchor Securing support frames, timber frames, fascade panels, curtain walling HRD frame anchor On most hollow and solid base HPS-1 impact anchor Fastening wood battens, components for electrical and plumbing installations HHD-S cavity anchor Fastening battens, channels panels HCA coil anchor Temporary external fastenings HSP/HFPdrywall plug Fastenings in dry walls HA8 ring/ hook anchor For suspended ceilings and other items from concrete ceilings DBZ wedge anchor Suspension from concrete ceilings e.g. using steel straps, punched band, Nonius system hanger HT metal frame anchor Fastening door and window frames = very suitable = may be suitable per application = technical report redundant fastening 12
6 Advantages Drill bit diameter resp. anchor size Steel, galvanised Steel, sheradised, hot dipped galv. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Flexibility of screw length Resilient toggling action to suit every base 10 mm 264 Preassembled with screw Screw of steel strength 5.8 or stainless steel A4 ( and 14 mm 268 impact and temperature resistant high quality plastic 8 10 mm 274 impact and temperature resistant high quality plastic 4 8 mm 292 Controlled setting Deliverable with or without prefitted screw 8 12 mm 296 Re-usable Removable 16 mm 298 Self-drilling tip One bit for anchor and screw Removable Quick and easy setting Automatic follow up expansion 8 mm 302 Small drill bit diameter Quick setting by impact extension Automatic follow up expansion No risk of distortion or forces of constraint Expansion cone can not be lost 6 mm 8 10 mm
7 Anchor type Base Approvals Application Medium and light duty anchors HK ceiling anchor Fastening of suspended ceilings, cable trays, pipes HPD aerated concrete anchor Various fastenings HKH hollow deck anchor Suspension from prestressed concrete hollow decks HTB Ingenious and strong for hollow base s Insulation fasteners IDP insulation fastener Fastening of hard, self supporting insulating s IZ expandable insulation fastener Fastening of soft and hard, self supporting insulating s IDMS / IDMR insulation fastener Fastening of soft and hard, self supporting insulating s and non self supporting insulation s = very suitable = may be suitable per application = technical report redundant fastening 14
8 Advantages Drill bit diameter resp. anchor size Steel, galvanised Steel, sheradised, hot dipped galv. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Small bore hole Quick and easy setting Approved (DIBt) Fire resistance Immediately loadable Approval for single point fastenings Approved for sprinkler systems Load carried by strong metal channel and screw Convincing simplicity when setting 6 mm M6 Without predrilling Thread: M6 M mm Thread: M6 M mm One piece element Corrosion resistant No heat bridge Corrosion resistant No heat bridge Reliable bonding of plaster 8 mm insulating thickness mm 8 mm insulating thickness up to 180mm One piece element Corrosion resistant Fire resistant 8 mm insulating thickness up to 150mm
9 Anchor type Base Approvals Application Adhesive anchor systems Foil capsule systems HVZ adhesive anchor HVU adhesive anchor Heavy-duty fastenings with small spacing and edge distances Heavy duty fastenings with small spacing and edge distances Injection mortar systems HIT-RE 500 SD Adhesive anchor in cracked concrete HIT-RE 500 Adhesive anchor HIT-HY 200 Adhesive anchor in cracked concrete = very suitable = may be suitable per application = technical report redundant fastening 16
10 Advantages Drill bit diameter resp. anchor size Steel, galvanised Steel, sheradised, hot dipped galv. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening No expansion pressure Small edge distances and spacing A strong and flexible foil capsule No expansion pressure Small edge distances and spacing A strong and flexible foil capsule M10 M HAS M8 M39 HIS-M8 - M20 Rebar dia mm 360 No expansion pressure Long working time HIT-V M8 M30 HIS-M8 - M20 Rebar dia mm 380 No expansion pressure Long working time HIT-V M8 M39 HIS-M8 - M20 Rebar dia mm 422 No expansion pressure Flexibility in terms of working time No styrene content No plasticizer content Environmental protection due to the minimized packaging HIT-V M8 M30 HIS-M8 - M20 Rebar dia mm
11 Anchor type Base Approvals Application Injection mortar systems HIT-HY 150 MAX Adhesive anchor in cracked concrete HIT-CT 1 Hilti Clean technology adhesive anchor HIT-HY 150 Adhesive anchor HIT ICE Adhesive anchor for low installation temperatures HIT-HY 70 Universal mortar for solid and hollow brick = very suitable = may be suitable per application = technical report redundant fastening 18
Anchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationCONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A2-304 2 2 NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame
More informationHK I. Anchor size (carbon steel) HK6 HK6L HK8 Resistance F Rk [kn] 2,0 5,0 5,0
HK HK I Anchor version Benefits - well proven - small drill bit diameter - for fixing in cracked concrete, redundant fastening only, e.g. suspended ceilings a ) Redundant fastening only Approvals / certificates
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationHVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version Benefits HVU2 Mortar capsule Anchor rod: HAS HAS-R HAS-HCR (M8-M30) Anchor rod: HAS-E HAS-E-R HAS-E-HCR (M8-M30)
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationHUS3 redundant SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS3 redundant SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS3 Screw anchor Ultimate performance screw anchor for redundant fastening applications Anchor version HUS3-H (R) HUS3-C HUS3-A Benefits
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationHPD Aerated concrete anchor. Approvals / certificates. Basic loading data (for a single anchor)
HPD Anchor version HPD Benefits - anchor for autoclaved aerated concrete - maximum use of base material capacity - setting without drilling Autoclaved aerated concrete Fire resistance Sprinkler approved
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationSYW Industry Sdn. Bhd. Stud Anchor. Hexagon Nut / Flange Nut. U - Bolt (c/w 2 Nuts) Steel Band. 1 of 8
SYW Industry Sdn. Bhd. Stud Anchor Hexagon Nut / Flange Nut U - Bolt (c/w 2 Nuts) Steel Band 1 of 8 BT Anchor (MM size) Expansion Anchor 2 of 8 Set Anchor Sleeve Anchor with Flange Nut 3 of 8 BT Anchor
More informationBollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings. Lockinex. ea i, ea u i
Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings Lockinex ea i, ea u i INTRODUCTION Protecting Building Curtilage, Assets & Personnel the Lockinex range of Bollards & Guards are
More informationHDA-P HDA-PR HDA-PF Anchor for presetting. HDA-T HDA-TR HDA-TF Anchor for through-fasting. Nuclear ICC. Steel failure
Anchor version Benefits HDA-P HDA-PR HDA-PF Anchor for presetting HDA-T HDA-TR HDA-TF Anchor for through-fasting suitable for non-cracked and cracked concrete C 20/25 to C 50/60 mechanical interlock (undercut)
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationF I X I N G B R O C H U R E
F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate
More informationD. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC
STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationALLIGATOR All-Purpose Anchors
ALLIGATOR All-Purpose s Description ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors... but also hold securely when they encounter an unexpected cavity, such as in
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More informationSpiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
More informationInstallation Instructions
Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationNONIUS ceiling SUSPENSION SYSTEM
NONIUS ceiling SUSPENSION SYSTEM QUICK HANGER SYSTEM CEILING AND WALL FIXINGS INSPECTION HATCHES ACCESSORIES PRODUct catalogue 2013 INDEX 6...NONIUS ceiling SUSPENSION SYSTEM 22... QUICK HANGER SYSTEM
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationUndercut anchor KH AA
HS 15 Undercut anchor KH AA Undercut anchor KH AA = 7 = 3 min DIBt 6,0 4,0 1,5 M6x8.5 14 020 820 6,0 4,0 3,0 M6x10 14 020 742 DRILLING Anchor sleeve inc. hexagon bolt with locking ratchet in stainless
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More informationInstallation Systems INSTALLATION SYSTEMS
INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249
More informationPRICE BOOK NO. 204S ORDERING INFORMATION
Container Quantities PRICE BOOK NO. 204S ORDERING INFORMATION Replacing Catalogue 789S Effective March, 2007 and Packaged items are supplied in full containers and we reserve the right to adjust order
More informationThe All American Anchor is a positive drive positive setting anchor for use in all masonry materials / / /8 7 1/ /16
ALL AMERICAN ANCHORS A PIN DRIVE EXPANSION ANCHOR DIAMETER /4" 5/6" 3/8" /2" 5/8" 3/4" The All American Anchor is a positive drive positive setting anchor for use in all masonry materials. ALL AMERICAN
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationfischer NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard.
fischer DUOtec NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard. fischer DUOTEC. The intelligent combination for high loads in gypsum plasterboard. Due to its unique
More informationANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationUltra Space Saver American Bicycle Security Company
The Ultra Space Saver is userfriendly and allows easy access to bikes. It provides convenient space for u-lock security on nearly any bike, including bikes with fenders and fork shocks. The double-sided
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationOriginal Gallery System
GAllery System Art Displays Original Gallery System a Gallery System product Here s everything you need to know to get started with your Gallery System Art Hanging System GS getting started To install
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationfischer Test Report Fixing Tests for Fastfloor and Hollowcore Units
fischer Test Report Fixing Tests for Fastfloor and Hollowcore Units CONTENTS. Test Parameters. January 999. July 999. March 00. Fixings Products Tested. Fischer Nylon SX Plug. Fischer FNS Nail.
More informationHilti HIT-HY 200 with HIT-Z
Hilti Injection Mortar System Benefits Hilti -R 500 ml foil pack (also available as 330 ml foil pack) Static mixer no cleaning required: zero succeptability to borehole cleaning conditions with dry and
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationGLOBALLOY HIGH STRENGTH MASONRY ANCHORS KEEP MACHINERY AND FIXTURES SECURELY IN PLACE
GLOBALLOY HIGH STRENGTH MASONRY ANCHORS KEEP MACHINERY AND FIXTURES SECURELY IN PLACE THE HEAVIER THE LOAD THE HARDER THEY HOLD PRE-ASSEMBLED READY TO USE NO EXTRA NUTS OR BOLTS NO RE-SPOTTING OF MACHINERY
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationSunTrackerTwo Preparation
TOLL FREE:(888)29-2705 FAX:(941)77-9460 info@eco-smart.com SunTrackerTwo Preparation Cutting Holes and Preparing Curbs T.G.I Or Truss CIRALIGHT INSTALLATION MANUAL Page 1 Cutting Holes and Preparing Curbs
More informationThread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationInstallation Instructions for. Before You Begin TOOLS REQUIRED
Composite Railing System STEP-BY-STEP Installation Instructions for Spectrum Composite Railing Virtually maintenance free 20-year warranty EverNew Spectrum Railing system is designed to work with a number
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationBUILD YOUR OWN SWIM RAFT
Steve Maxwell s BUILD YOUR OWN Composite Top & Simple Design Makes For Great Summer Fun CLICK FOR TABLE OF CONTENTS At first glance it would seem that I built this raft for my kids, but that s not entirely
More informationCosmopolitan Grand Hardware
STEP BY STEP INSTALLATION INSTRUCTIONS Cosmopolitan Grand Hardware Wall Mount Single Rod Set Everything You Need Table of Contents Step 1 - Getting Started...3 Overview - Wall Mount Single Rod Set...4
More informationPRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationAcceptable Standards of Domestic Construction
Truss or Rafter Roof Batten Triple grip fastener (for roof trusses) Foil lined Insulation blanket Top plate Sprocket Brick tie Top plate strapping at 1200mm max. cts. Note: Holding down straps should be
More informationAIR ACTIVATED MODULAR INLET
AIR ACTIVATED MODULAR INLET 345678903456789034567890 345678903456789034567890 MI4 345678903456789034567890 345678903456789034567890 Each MI4 includes: - Modular Inlet - Counterweight - Hardware Package
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these
More informationSturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January
More informationFace Mount to Through-the-Post Mount
Face Mount to Through-the- Mount Cable Runs through Two Corners When going around two corners, it s necessary to tension the cable from both ends as shown in Deck 4. Use the 672 series The tensioning devices
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationInternal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) Hilti anchor design software
Anchor version Benefits Internal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) the perfect solution for small edge and space distance suitable for thin concrete
More informationCosmopolitan Grand Hardware
STEP BY STEP INSTALLATION INSTRUCTIONS Cosmopolitan Grand Hardware Wall Mount Single Corner Rod Set Everything You Need Table of Contents Step 1 - Getting Started...3 Overview - Wall Mount Single Corner
More informationPENSTOCK VALVES. Performance through Excellence
VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationCEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. International Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings International Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationStratco Sanctuary INSTALLATION BEFORE YOU START TOOLS REQUIRED GUIDE
INSTALLATION GUIDE Stratco Sanctuary Verandahs, Patios and Carports BEFORE YOU START It is important to check with your Local Government Authority prior to the installation of your new Stratco Sanctuary
More informationBaltic State Price-list Concrete & Timber Work fasteners
Baltic State 2017.11 Price-list Concrete & Timber Work fasteners Fast and easy installation High security level No time-waste, the anchor carrying loads immediately Removable Approved products 2 Installation
More informationPole Line Hardware. Heavy-Duty Spool Rack (200 A) No. of Wires. Anti-Vibration Kit for Spool Rack. Heavy-Duty Spool Rack (400 A) No.
Heavy-Duty Spool Rack (200 A) SS401E - SS802E - SS803E - SS804E No. of Wires Overall Length SS401E 1 9-1/2 300 136.3 10 SS802E 2 17-1/2 520 236.3 SS803E 3 25-1/2 780 354.5 5 SS804E 4 33-1/2 1040 472.7
More informationHollo Set Drop-In Anchors
Description The Hollo Set drop-in anchor is an internally threaded, flush mount expansion anchor designed for use in hollow and solid base materials. In hollow concrete block and precast hollow core plank,
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationVINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS
P a g e 1 VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing The design of this pergola is based on all posts being installed
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationNRS Installation Manual
NRS Installation Manual Chair Mount Type Standard / EU Spec. KAZE (AY-KFPLU AY-NRS1 is shown.) OTO (AY-OLL AY-NRS1 is shown.) Separate Type (AY-NRS2B-W is shown.) Installer: Read through this installation
More informationSB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More informationULTRA SPACE SAVER Installation Instructions
Installation Instructions The Ultra Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationSECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.
More informationCoatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationAdjustable Countertop Installation
Adjustable Countertop Installation Applies to Models: A1, A2, A3, A4, A5, & A6 Required Tools: Stud Finder, Level 1/4 deep well socket, Screwdrivers, Tape Measure, Drill and Drill Bits Language of origin:
More information